| BurnEx™ 30-107 | Nyacol Nano Technology | BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coati...もっと表示する BurnEx™ 30-107 is a flame retardant synergist for polyvinyl chloride and other materials employing halogens as its primary flame retardant. It is composed of agglomerated particles in the range of 10 to 40 microns and is used in textiles, adhesives, coatings, and water-based systems. 表示を減らす | |
| BurnEx™ A1582 | Nyacol Nano Technology | BurnEx™ A1582, a Nano-Dispersible Dry Powder Colloidal Antimony Pentoxide Flame Retardant Additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in flexible vinyl and thermoplastic polyester. | |
| BurnEx™ ADP480 | Nyacol Nano Technology | BurnEx™ ADP480 a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Polyolefins, HIPS, and Adhesives | |
| BurnEx™ ADP494 | Nyacol Nano Technology | BurnEx™ ADP494, a nano-dispersible dry powder colloidal antimony Pentoxide flame retardant additive, is used with halogenated flame retardants in polymers, solvents and adhesives. It has end use applications in Solution-spun fibers, ABS, Epoxy-ketones. | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...もっと表示する BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. 表示を減らす | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...もっと表示する BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. 表示を減らす | |
| BurnEx™ ZTA | Nyacol Nano Technology | BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds ...もっと表示する BurnEx™ ZTA is a dry powder colloidal antimony Pentoxide and a synergist with PVC and other halogenated polymers. Its particles are about 10-30 microns in size and it is used as a flame retardant synergist in vinyl plastisols, injection molding compounds and calendar compounds. 表示を減らす | |
| Chlorez® 700 | Dover Chemical Corporation | Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, text...もっと表示する Chlorez® 700 is a white powder solid that is 70% chlorinated paraffin and is well suited for use with alkyd resins. It is primarily used as a flame retardant for production of various products such as paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. Additionally, it can improve ancillary in various grades of rubber and shows excellent synergies with antimony trioxide. 表示を減らす | |
| Chlorez® 700-S | Dover Chemical Corporation | Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, t...もっと表示する Chlorez® 700-S is a solid white powder of 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. 表示を減らす | |
| Chloroflo 42 | Dover Chemical Corporation | Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used i...もっと表示する Chloroflo 42 is a clear liquid made of a chlorinated long chain paraffin that contains a stabilizer to maintain product integrity during transport and storage. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. Primarily used in metal working applications as a straight or soluble oil for machining, drawing and stamping processes. Chloroflo 42 can be used in a variety of other applications including use as a flame retardant and plasticizer for paints and plastic production. 表示を減らす | |
| Chlorowax® 40 | Dover Chemical Corporation | Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers an...もっと表示する Chlorowax® 40 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax® 40 can be used in plasticizers and EP metalworking packages. Chlorowax 40 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. 表示を減らす | |
| Chlorowax® 50 | Dover Chemical Corporation | Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited t...もっと表示する Chlorowax® 50 is a yellowish liquid made of a long chain chlorinated paraffin that contains a stabilizer to maintain product integrity during transport and storage. Primarily used as a flame retardant additive, Chlorowax 50 is typically (but not limited to) applied in straight oil machining, drawing and stamping fluids. 表示を減らす | |
| Decabromodiphenyl Oxide | Chemceed | Decabromodiphenyl Oxide is used as a flame retardant for elastomers, wire & cable, textile coatings, electrical & electronic equipment, automotive parts, and construction materials. | |
| DO-8110 | Dover Chemical Corporation | DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applicatio...もっと表示する DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Doverphos® 253 | Dover Chemical Corporation | Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC...もっと表示する Doverphos® 253 is a clear liquid made of dioleyl hydrogen phosphite with a relatively high molecular weight and low phosphorus content. Primarily used as a flame retardant additive, it can be used as a costabilizer with mixed metal stabilizers used in PVC applications. In addition Doverphos® 253 can be used in lube applications as an additive for metalworking fluids. 表示を減らす | |
| Doversperse 3-NR | Dover Chemical Corporation | Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber...もっと表示する Doversperse 3-NR is a cream white liquid of chlorinated paraffin aqueous emulsion of medium chain length. Primarily used as a flame retardant additive, it can improve adhesion and impart water resistance to a number of products including adhesives, rubber coatings, inks, carpet backings, paper and fabric coatings. Because of Doversperse 3-NR's non-ionic base, it can be used in both anionic and cationic emulsion systems. 表示を減らす | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...もっと表示する EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 表示を減らす | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...もっと表示する EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 表示を減らす | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...もっと表示する EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 表示を減らす | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...もっと表示する EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. 表示を減らす | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both i...もっと表示する EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. 表示を減らす | |
| EcoFlame B-641 | Unibrom Corp. | EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum...もっと表示する EcoFlame B-641, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is also recommended for styrene based systems such as extruded and expanded polystyrene foams. EcoFlame B-641 has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, particle size of 95% with 80 mesh passed, and a purity of 99% min. 表示を減らす | |
| EcoFlame B-641TC | Unibrom Corp. | EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minim...もっと表示する EcoFlame B-641TC, a white powder/granular form with the chemical name of Hexabromocyclodeodecane, is an additive flame retardant used in a wide range of textiles, coatings, adhesives, and plastics. It has high aliphatic bromine content, resulting in minimum effect on polymer physical properties and lower loading, and is tailor-made for coating and textile fields with disperse-ability and flow-ability. EcoFlame B-641TC has a varying particle size of 1-2, 3-5, and 7-13, it also has a molecular weight of 641.7, a bromine content of 74% min, a melting point of 180 min, and a purity of 99% min. 表示を減らす | |
| EcoFlame B-680 | Unibrom Corp. | EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplasti...もっと表示する EcoFlame B-680, a white to off-white crystalline powder/granular form with the chemical name of 1,2 –bis (2,4,6-tribromophenoxy)ethane, is a flame retardant of ABS, elastomers, textiles, unsaturated polyesters, HIPS, Polycarbonate, adhesives, thermoplastic, and coatings. It is especially efficient for applications in which thermal stability at high processing temperatures is important. EcoFlame B-680 has a molecular weight of 688, a melting point of 220 min, and bromine of 70 min. 表示を減らす | |
| Epokukdo KB-560 | Kukdo Chemical Co., Ltd. | Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...もっと表示する Epokukdo KB-560 is a high-brominated flame-retardant Epoxy oligomer Resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 表示を減らす | |
| Epokukdo KB-562P | Kukdo Chemical Co., Ltd. | Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrica...もっと表示する Epokukdo KB-562P is a high-brominated flame-retardant epoxy oligomer Resin using TBBA and TBP asmajor raw materials. It is a different type from conventional flame retardant used in the past. This Epoxy oligomer Resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 表示を減らす | |
| Epokukdo KB-563P | Kukdo Chemical Co., Ltd. | Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrica...もっと表示する Epokukdo KB-563P is a high-brominated flameretardant epoxy oligomer resin using TBBA and TBP as major raw materials. It is a different type from conventional flame retardant used in the past. This epoxy oligomer resin shows excellent mechanical, electrical properties, chemical resistance, molding property, heat resistance and melt flow-rate. In order to improve the flame retardancy, it can be used in engineering plastics such as ABS, HIPS, PP, PET, PC, PBT and so forth. 表示を減らす | |
| Exolit® OP 935 | Clariant Plastics & Coatings Ltd. | Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in ...もっと表示する Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in solvents like acetone or MEK. 表示を減らす | |
| Exolit® OP 945 (TP) | Clariant Plastics & Coatings Ltd. | Exolit® OP 945 (TP) is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 µm. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® ...もっと表示する Exolit® OP 945 (TP) is a white, fine-grained powder based on an organic phosphinate with a D95 of less than 5 µm. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 945 (TP) can easily be dispersed in solvents like acetone or MEK. 表示を減らす | |
| Hexabromocyclododecane | Weifang Jahwa Chemical Co., Ltd. (Weifang Fengtai New Material Co., Ltd.) | Hexabromocyclododecane, in the form of a white granular powder, is a cyclo-aliphatic flame retardant. This product can be used in adhesives, unsaturated polyester resins, and coatings. | |
| HN 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, an...もっと表示する HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-336 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. 表示を減らす | |
| HN 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading leve...もっと表示する HN-36 is a halogen–free, medium-coarse particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-36 is recommended for rubber goods, compression molded thermosets, coatings, adhesives, latex, vinyl and urethane compounds and carpet backings. 表示を減らす | |
| HN 434 Alumina Trihydrate | Huber Engineered Materials | HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and ...もっと表示する HN-434 is a halogen–free, fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-434 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds. 表示を減らす | |
| HN 532 Alumina Trihydrate | Huber Engineered Materials | HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels,...もっと表示する HN-532 is a halogen–free, very fine particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-532 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, foam materials, add cast polyester and epoxy parts, coatings, adhesives, latex, vinyl and urethane. 表示を減らす | |
| Hordaresin CH151P | Dover Chemical Corporation | Hordaresin CH151P is a solid white powder of 71% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins...もっと表示する Hordaresin CH151P is a solid white powder of 71% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant it can be used in a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. And it shows excellent synergies with antimony trioxide and improvements with ancillary in various grades of rubber. 表示を減らす | |
| Hordaresin NP-70 | Dover Chemical Corporation | Hordaresin NP-70 is a solid white powder that is 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant, it has a variety of applications including paints, coatings, rubber, adhesives, polyolefins, tex...もっと表示する Hordaresin NP-70 is a solid white powder that is 70% chlorinated paraffin that is well suited for use with alkyd resins. Primarily used as a flame retardant, it has a variety of applications including paints, coatings, rubber, adhesives, polyolefins, textiles & fabrics. It shows excellent synergies with antimony trioxides and improvements with ancillary in various grades of rubber. 表示を減らす | |
| HYMOD® M1500 SPD TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechani...もっと表示する Hymod® M1500 SPD is a fine particle size, surface treated ATH product that provides functional reinforcement, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. Mechanical properties observed with Hymod® M1500 SPD are comparable to fine particle precipitated alumina trihydrate. 表示を減らす | |
| HYMOD® M9400 SP TREATED ALUMINA TRIHYDRATE | Huber Engineered Materials | Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compo...もっと表示する Hymod® M9400 SP aluminum hydroxide (ATH) is a vinyl- functionalized, precipitated grade developed for peroxide-cured silicone rubber. Everything about this product has been optimized for maximum performance in high-voltage, silicone rubber insulator compositions. Silicone rubber compound containing Hymod® M9400 SP does not stick in the mold. This increases the value of your compound to your customers. They will save money by reducing the number of rejected parts. 表示を減らす | |
| KEMGARD® 911A MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properti...もっと表示する Kemgard® 911A is a high efficiency calcium zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. 表示を減らす | |
| KEMGARD® 911B MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties...もっと表示する Kemgard® 911B is a high efficiency basic zinc molybdate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. 表示を減らす | |
| KEMGARD® 911C MOLYBDATE COMPOUND | Huber Engineered Materials | Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder fl...もっと表示する Kemgard® 911C is a high efficiency zinc molybdate-magnesium silicate compound used for flame retardancy and smoke suppression. Kemgard products are available with hydrophobic, non-functional surface treatments to reduce moisture pick-up, improve powder flow properties and ensure better dispersion in the polymer matrix. Can be used in automotive and building applications where certain criteria for flame retardance is required. 表示を減らす | |
| MelaminebyOCI™ GPH | OCI MELAMINE | MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...もっと表示する MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 表示を減らす | |
| MelaminebyOCI™ GPH-LD | OCI MELAMINE | MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...もっと表示する MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. 表示を減らす | |
| MelaminebyOCI™ SLP | OCI MELAMINE | MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...もっと表示する MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. 表示を減らす | |
| MICRAL® 632 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such...もっと表示する Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such as urethane foams, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XPLE. A complete range of surface modifications is available to aid processing and enhance physical properties. These include silanes, stearates and wetting agents. 表示を減らす | |
| Micral® AM550 ALUMINA TRIHYDRATE | Huber Engineered Materials | Micral® AM550 is a narrow particle size distribution flame retardant and smoke suppressant with a median particle size of about 5.5 microns which offers a lower surface area. Used in adhesive, caulk, sealant and paints and coating applications. | |
| Nyacol® A1530 | Nyacol Nano Technology | Nyacol® A1530 is a water-based dispersion of 30nm particle antimony at 29% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1540N | Nyacol Nano Technology | Nyacol® A1540N is a water-based dispersion of 30nm particle antimony at 38% Antimony Pentoxide. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyacol® A1550 | Nyacol Nano Technology | Nyacol® A1550 is a water-based dispersion of 30nm particle antimony at 48% Antimony Pentoxide and a pH of 5. It is used in the flame retardant treatments of materials such as textiles, nonwovens, adhesive latices, and coatings. | |
| Nyagraph ® 249 | Nyacol Nano Technology | Nyagraph® 249 is a natural material based on the processing of graphite ore. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 200 | Nyacol Nano Technology | Nyagraph® 200 is a natural material based on the processing of graphite ore with a fine particle size of 80%>180 microns. This product is an intumescent flame retardant used in sealants, adhesives, and coatings and has applications in soft ash, plastic. | |
| Nyagraph® 250 | Nyacol Nano Technology | Nyagraph® 250 is a natural material based on the processing of graphite ore with an expansion volume of >250cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 251 | Nyacol Nano Technology | Nyagraph® 251 is a natural material based on the processing of graphite ore with a minimum of 250ml/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 35 | Nyacol Nano Technology | Nyagraph® 35 is a natural material based on the processing of graphite ore with an expansion volume of ≥35cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® 351 | Nyacol Nano Technology | Nyagraph® 351 is a natural material based on the processing of graphite ore with an expansion volume of 330-350cm3/g. This product is an intumescent flame retardant used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® FP | Nyacol Nano Technology | Nyagraph® FP is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. | |
| Nyagraph® KP251 | Nyacol Nano Technology | Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatin...もっと表示する Nyagraph® KP251 is a natural material based on the processing of graphite ore with an expansion volume of ≥230cm3/g and soft ash, low initial expansion temperature, and low sulfur. This product is used in sealants, bitumens, rubbers, adhesives, and coatings. 表示を減らす | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...もっと表示する Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 表示を減らす | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiven...もっと表示する Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. 表示を減らす | |
| Paroil® 10-NR | Dover Chemical Corporation | Paroil® 10-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping ap...もっと表示する Paroil® 10-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 10-NR can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 140 | Dover Chemical Corporation | Paroil® 140 is a light yellow liquid made from long chains of stabilized chlorinated paraffin. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coa...もっと表示する Paroil® 140 is a light yellow liquid made from long chains of stabilized chlorinated paraffin. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 140 can also be used in conjunction with other chain length products. 表示を減らす | |
| Paroil® 140-LV | Dover Chemical Corporation | Paroil® 140-LV is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame...もっと表示する Paroil® 140-LV is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 140-LV can also be used in conjunction with other chain length products. 表示を減らす | |
| Paroil® 142 | Dover Chemical Corporation | Paroil® 142 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame re...もっと表示する Paroil® 142 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 142 can also be used as plasticizers and in EP metalworking packages. 表示を減らす | |
| Paroil® 142-LV | Dover Chemical Corporation | Paroil® 142-LV is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame...もっと表示する Paroil® 142-LV is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 142-LV can also be used as plasticizers and in EP metalworking packages. 表示を減らす | |
| Paroil® 145 | Dover Chemical Corporation | Paroil® 145 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound with carbon chain lengths of C18-C30 and contains a stabilizer to maintain product integrity during transport and storage. Primarily used for draw...もっと表示する Paroil® 145 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound with carbon chain lengths of C18-C30 and contains a stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. 表示を減らす | |
| Paroil® 150 | Dover Chemical Corporation | Paroil® 150 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound that contains a stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroi...もっと表示する Paroil® 150 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound that contains a stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. 表示を減らす | |
| Paroil® 150-LV | Dover Chemical Corporation | Paroil® 150-LV is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound that contains a stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Pa...もっと表示する Paroil® 150-LV is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound that contains a stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. 表示を減らす | |
| Paroil® 152 | Dover Chemical Corporation | Paroil® 152 is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping appl...もっと表示する Paroil® 152 is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 152 can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 45 | Dover Chemical Corporation | Paroil® 45 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applica...もっと表示する Paroil® 45 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 45 can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 500 | Dover Chemical Corporation | Paroil® 500 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound with carbon chain lengths of C18-C30 and contains a stabilizer to maintain product integrity during transport and storage. Primarily used for draw...もっと表示する Paroil® 500 is a light yellow, nonflammable, non-corrosive, liquid made from a chlorinated paraffin compound with carbon chain lengths of C18-C30 and contains a stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. 表示を減らす | |
| Paroil® 51-NR | Dover Chemical Corporation | Paroil® 51-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping ap...もっと表示する Paroil® 51-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 51-NR can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 53-NR | Dover Chemical Corporation | Paroil® 53-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping ap...もっと表示する Paroil® 53-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 53-NR can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 54-NR | Dover Chemical Corporation | Paroil® 54-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping ap...もっと表示する Paroil® 54-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 54-NR can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 56-NR | Dover Chemical Corporation | Paroil® 56-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping ap...もっと表示する Paroil® 56-NR is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 56-NR can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 58-NR | Dover Chemical Corporation | Paroil® 58-NR is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping appl...もっと表示する Paroil® 58-NR is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 58-NR can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® 63-NR | Dover Chemical Corporation | Paroil® 63-NR is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping appl...もっと表示する Paroil® 63-NR is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 63-NR can also be used as a plasticizer or as an additive in EP metalworking packages. 表示を減らす | |
| Paroil® CW 40-AO | Dover Chemical Corporation | Paroil® CW 40-AO is a thick yellowish liquid made from a chlorinated paraffin compound with a very long alkane chain contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping ...もっと表示する Paroil® CW 40-AO is a thick yellowish liquid made from a chlorinated paraffin compound with a very long alkane chain contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® CW 40-AO can also be used as a plasticizer in the production of paints, sealants, rubbers PVC and PUF products. 表示を減らす | |
| Paroil® CW 50-AO | Dover Chemical Corporation | Paroil® CW 50-AO is a thick yellowish liquid made from a chlorinated paraffin compound with a very long alkane chain contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping ...もっと表示する Paroil® CW 50-AO is a thick yellowish liquid made from a chlorinated paraffin compound with a very long alkane chain contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® CW 50-AO can also be used as a plasticizer in the production of paints, sealants, rubbers PVC and PUF products. 表示を減らす | |
| Phosflex® 362 | Univar Solutions | Phosflex® 362 is a highly efficient plasticizer for PVC, with very good low-temperature flexibility and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 362 is its ability to reduce flammability while also red...もっと表示する Phosflex® 362 is a highly efficient plasticizer for PVC, with very good low-temperature flexibility and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 362 is its ability to reduce flammability while also reducing smoke. 表示を減らす | Request Sample |
| Phosflex® 375 | Univar Solutions | Phosflex® 375 is a proprietary plasticizer blend containing an alkyl diphenyl phosphate and a triaryl phosphate ester to offer both reasonable plasticizing performance in addition to enhanced flame retardant properties. This mixture is useful in several P...もっと表示する Phosflex® 375 is a proprietary plasticizer blend containing an alkyl diphenyl phosphate and a triaryl phosphate ester to offer both reasonable plasticizing performance in addition to enhanced flame retardant properties. This mixture is useful in several PVC applications including wallcovering, transparent sheet goods, laminated products, or any other flexible vinyl composite requiring a high degree of flame retardancy. 表示を減らす | Request Sample |
| Phosflex® 390 | Univar Solutions | Phosflex® 390 is isodecyl diphenyl phosphate made from synthetic feedstock. It is a highly efficient plasticizer for PVC, with very good low-temperature flexibility, and excellent solvating properties for fast fusion. One of the unique characteristics of ...もっと表示する Phosflex® 390 is isodecyl diphenyl phosphate made from synthetic feedstock. It is a highly efficient plasticizer for PVC, with very good low-temperature flexibility, and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 390 is its ability to reduce flammability while also reducing smoke. 表示を減らす | Request Sample |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...もっと表示する R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. 表示を減らす | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...もっと表示する R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. 表示を減らす | |
| SB 336 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent proces...もっと表示する SB-336 is a medium particle size ATH product that provides low cost flame retardancy and smoke suppression in a variety of applications. The unique particle size is specifically designed for low viscosites, high filler loading levels, and excellent processing characteristics. SB-336 is recommended for spray-up or hand lay-up FRP applications, filament winding, panel production, resin injection, SMC/BMC, foam materials, and cast polyester and epoxy parts. 表示を減らす | |
| SB 36 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-36 is a coarse, mechanically ground alumina trihydrate used to suppress flame and smoke in applications such as latex, vinyl and urethane compounds. | |
| SB 432 ALUMINA TRIHYDRATE | Huber Engineered Materials | SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ...もっと表示する SB-432 was developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part. 表示を減らす | |
| Sodium Metasilicate Anhydrous - Special Grade S-25 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydr...もっと表示する Sodium Metasilicate Anhydrous - Special Grade S-25 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a loose bulk density of between 54 and 62 lb/ft3 and a mole ratio of between 1.02 and 1.1. Sodium Metasilicate Anhydrous - Special Grade S-25 is used in paint, coatings, adhesives, and sealants. 表示を減らす | |
| Sodium Metasilicate Pentahydrate - Uniflo ® 26 | Occidental Chemical Corp. (OxyChem) | Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used...もっと表示する Sodium Metasilicate Pentahydrate - Uniflo ® 26 is an aqueous liquid which contains sodium oxide and silicon dioxide. This product has a meta turbidity of 5 and a mole ratio of between 0.961 and 0.985. Sodium Metasilicate Pentahydrate - Uniflo ® 26 is used in paint, coatings, adhesives, and sealants. 表示を減らす | |
| TCEP Flame Retardant | Yangzhou Chenhua New Material CO., LTD. | TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardan...もっと表示する TCEP Flame Retardant is a colorless to yellowish transparent liquid with a molecular weight of 285.5. This product has a specific gravity between 1.41 and 1.43 and a flash point greater than 200 degrees Celsius. TCEP Flame Retardant imparts flame retardant properties as a nitrocellulose varnish additive due to its plasticization. 表示を減らす | |
| Tri(2-Chloroisopropyl) Phosphate (TCPP) | Hainan Zhongxin Chemical Co., Ltd. | Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins a...もっと表示する Tri(2-Chloroisopropyl) Phosphate (TCPP) is a colorless to light yellow transparent liquid with a chlorine content of at least 32.5%. It is primarily used as a general purpose chlorinated phosphate ester flame retardant. It is compatible with most resins and is recommended for use in the production of PU foams, PVC and adhesives. 表示を減らす |
