| KRATON® D1171 PT Polymer | Univar Solutions | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness,...もっと表示する KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 表示を減らす | Request Sample |
| KRATON® D1183 PT Polymer | Univar Solutions | KRATON® D1183 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low visco...もっと表示する KRATON® D1183 PT Polymer is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1183 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® D1184 AIM Polymer | Univar Solutions | KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range...もっと表示する KRATON® D1184 AIM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with calcium carbonate. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® D1184 AT Polymer | Univar Solutions | KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...もっと表示する KRATON® D1184 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® D1191 ET Polymer | Univar Solutions | KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...もっと表示する KRATON® D1191 ET Polymer is a clear, radial block copolymer based on styrene and butadiene with bound styrene of 33.5% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1191 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, sealants, and coatings. 表示を減らす | Request Sample |
| KRATON® D1192 ET Polymer | Univar Solutions | KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...もっと表示する KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® D1192 ETM Polymer | Univar Solutions | KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, an...もっと表示する KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® D1193 PT Polymer | Univar Solutions | KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...もっと表示する KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1193 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® D4150 KT Polymer | Univar Solutions | KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...もっと表示する KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® D4150 KU Polymer | Univar Solutions | KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, a...もっと表示する KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON™ DX405 J | Univar Solutions | KRATON™ DX405 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 24% mass. It is used for printing plates, UV cured, solvent borne and hot melt adhesive applications. | Request Sample |
| KRATON® FG1901 GT Polymer | Univar Solutions | KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...もっと表示する KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1901 GT Polymer is used in adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON® FG1924 GT Polymer | Univar Solutions | KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...もっと表示する KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1924 GT Polymer is used in adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| KRATON™ G1633 E | Univar Solutions | KRATON™ G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of ...もっと表示する KRATON™ G1633 E is a clear linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 29.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. 表示を減らす | Request Sample |
| KRATON™ G1643 M | Univar Solutions | KRATON™ G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealant...もっと表示する KRATON™ G1643 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 20%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. 表示を減らす | Request Sample |
| KRATON™ G1645 M | Univar Solutions | KRATON™ G1645 M is a linear triblock copolymer based on styrene and ethylene/butylene. It exhibits enhanced midblock for increased compatibility with polypropylene, good UV and thermal stability, and low melt flow designed for stability in blown film appl...もっと表示する KRATON™ G1645 M is a linear triblock copolymer based on styrene and ethylene/butylene. It exhibits enhanced midblock for increased compatibility with polypropylene, good UV and thermal stability, and low melt flow designed for stability in blown film applications. 表示を減らす | Request Sample |
| KRATON™ G1650 M | Univar Solutions | KRATON™ G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealant...もっと表示する KRATON™ G1650 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens. 表示を減らす | Request Sample |
| KRATON™ G1651 H | Univar Solutions | KRATON™ G1651 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of...もっと表示する KRATON™ G1651 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 31.5% mass. It is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the mid block suggests the use of this product in applications that must withstand weathering and high processing temperatures. 表示を減らす | Request Sample |
| KRATON™ G1652 H | Univar Solutions | KRATON™ G1652 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient...もっと表示する KRATON™ G1652 H is a clear, linear triblock copolymer based on styrene and ethylene/butylene, S-E/B-S, with bound styrene of 30% mass. It is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants and coatings. 表示を減らす | Request Sample |
| KRATON™ G1657 M | Univar Solutions | KRATON™ G1657 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in f...もっと表示する KRATON™ G1657 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13% . It is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. 表示を減らす | Request Sample |
| KRATON™ G1701 M | Univar Solutions | KRATON™ G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear ap...もっと表示する KRATON™ G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. 表示を減らす | Request Sample |
| KRATON™ G1702 H | Univar Solutions | KRATON™ G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or t...もっと表示する KRATON™ G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. 表示を減らす | Request Sample |
| KRATON™ MD1653 M | Univar Solutions | KRATON™ MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is used as a modifier of polymers, as an ingredient in formulating adhesives, sealants and coatings. | Request Sample |
| KRATON™ MD6684 GS-N | Univar Solutions | KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for foot...もっと表示する KRATON™ MD6684 GS-N is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass and 1% maleic anhydride. It is used as a modifier of polymers and as an ingredient in formulating compounds for footwear, adhesives, sealants and coatings. 表示を減らす | Request Sample |
| KRATON™ RP6670 GT | Univar Solutions | KRATON™ RP6670 GT is a clear , linear triblock copolymer based on styrene and ethylene/butylene, with a maleic anhydride content of 1.5%. | Request Sample |
| KRISTALEX 1120 | Univar Solutions | KRISTALEX 1120 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3070 | Univar Solutions | KRISTALEX 3070 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3085 | Univar Solutions | KRISTALEX 3085 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3100 | Univar Solutions | KRISTALEX 3100 is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 3115LV | Univar Solutions | KRISTALEX 3115LV is a water clear, highly color stable, nonpolar, low molecular weight thermoplastic polymer. This resin is compatible with a wide variety of oils, waxes, alkyds, plastics, and elastomers, and is soluble in many common organic solvents. | Request Sample |
| KRISTALEX 5140 | Univar Solutions | KRISTALEX 5140 is a high softening point, low molecular weight resin produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions requiring water clear ...もっと表示する KRISTALEX 5140 is a high softening point, low molecular weight resin produced by copolymerization of pure aromatic monomers. It is designed primarily for use as a modifier resin in high performance adhesives and coating compositions requiring water clear color, heat stability, and resistance to oxidation and discoloration. . 表示を減らす | Request Sample |
| Kuraray Elvanol ™ 85-18 | Univar Solutions | Kuraray Elvanol ™ 85-18 is a fully hydrolyzed, general-purpose polyvinyl alcohol that provides maximum water resistance in adhesives. | Request Sample |
| Kuraray Elvanol™ 71-30 | Univar Solutions | Kuraray Elvanol™ 71-30 is a fully hydrolyzed, general-purpose polyvinyl alcohol that provides maximum water resistance in adhesives. | Request Sample |
| Kuraray Elvanol™ 80-18 | Univar Solutions | Kuraray Elvanol™ 80-18 is a fully hydrolyzed, general-purpose polyvinyl alcohol that provides maximum water resistance in adhesives. | Request Sample |
| Kuraray Elvanol™ 90-50 | Univar Solutions | Kuraray Elvanol™ 90-50 is a fully hydrolyzed, general-purpose polyvinyl alcohol that provides maximum water resistance in adhesives. | Request Sample |
| Kuraray Exceval™ 2117 | Univar Solutions | Kuraray Exceval™ 2117 is a water-soluble ethylene-vinyl alcohol copolymer that achieves the compatibility of both high water resistance and viscosity stability. | Request Sample |
| Kuraray Exceval™ 2817 SB | Univar Solutions | Kuraray Exceval™ 2817 SB is a water-soluble ethylene-vinyl alcohol copolymer that achieves the compatibility of both high water resistance and viscosity stability. | Request Sample |
| Kuraray Exceval™ HR-3010 | Univar Solutions | Kuraray Exceval™ HR-3010 is a super hydrolyzed grade of water-soluble ethylene-vinyl alcohol copolymer that achieves the compatibility of both high water resistance and viscosity stability. | Request Sample |
| Kuraray Poval™ 100-88 | Univar Solutions | Kuraray Poval™ 100-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 100-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders ...もっと表示する Kuraray Poval™ 100-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 100-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 22-88 | Univar Solutions | Kuraray Poval™ 22-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 22-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders fo...もっと表示する Kuraray Poval™ 22-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 22-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 27-96 | Univar Solutions | Kuraray Poval™ 27-96 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 27-96 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders fo...もっと表示する Kuraray Poval™ 27-96 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 27-96 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 3-85 | Univar Solutions | Kuraray Poval™ 3-85 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 3-85 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders ...もっと表示する Kuraray Poval™ 3-85 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 3-85 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 32-80 | Univar Solutions | Kuraray Poval™ 32-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 32-80 is recommended for a variety of uses, ranging from emulsion polymerization aids to binder...もっと表示する Kuraray Poval™ 32-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 32-80 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 35-80 | Univar Solutions | Kuraray Poval™ 35-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 35-80 is recommended for a variety of uses, ranging from emulsion polymerization aids to binder...もっと表示する Kuraray Poval™ 35-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 35-80 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 4-88 | Univar Solutions | Kuraray Poval™ 4-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 4-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders ...もっと表示する Kuraray Poval™ 4-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 4-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 4-98 | Univar Solutions | Kuraray Poval™ 4-98 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. | Request Sample |
| Kuraray Poval™ 48-80 | Univar Solutions | Kuraray Poval™ 48-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 48-80 is recommended for a variety of uses, ranging from emulsion polymerization aids to binder...もっと表示する Kuraray Poval™ 48-80 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 48-80 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 49-88 | Univar Solutions | Kuraray Poval™ 49-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 49-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders fo...もっと表示する Kuraray Poval™ 49-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 49-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 5-74 | Univar Solutions | Kuraray Poval™ 5-74 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 5-74 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders ...もっと表示する Kuraray Poval™ 5-74 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 5-74 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 5-82 | Univar Solutions | Kuraray Poval™ 5-82 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 5-82 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders ...もっと表示する Kuraray Poval™ 5-82 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 5-82 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 5-88 | Univar Solutions | Kuraray Poval™ 5-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 5-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders ...もっと表示する Kuraray Poval™ 5-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 5-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 6-88 | Univar Solutions | Kuraray Poval™ 6-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 6-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for ...もっと表示する Kuraray Poval™ 6-88 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. Kuraray Poval™ 6-88 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ 75-15 | Univar Solutions | Kuraray Poval™ 75-15 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 75-15 is recommended for a variety of uses, ranging from emulsion polymerization aids to binder...もっと表示する Kuraray Poval™ 75-15 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. The Kuraray Poval™ 75-15 is recommended for a variety of uses, ranging from emulsion polymerization aids to binders for pigments in paper applications. 表示を減らす | Request Sample |
| Kuraray Poval™ LM-10HD | Univar Solutions | Kuraray Poval™ LM-10HD is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. | Request Sample |
| Kuraray Poval™ LM-20 | Univar Solutions | Kuraray Poval™ LM-20 is a partially saponified grade of polyvinyl alcohol. It is supplied as fine powder/granules with a defined grain size. | Request Sample |
| LAPONITE® RD | Univar Solutions | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...もっと表示する LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. 表示を減らす | Request Sample |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...もっと表示する LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. 表示を減らす | Request Sample |
| LUDOX® CL | Univar Solutions | LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that impa...もっと表示する LUDOX® CL Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size dispersed in a slightly acidic aqueous medium. Unlike most grades of colloidal silica, the silica particles are coated with an aluminum compound that imparts a positive charge. LUDOX® CL Colloidal Silica may be used in various coating applications in which the formulation requires acidic pH or cationic polymers or surfactants. The positively charged particles may be used as surface treatments to paper and fibrous materials. LUDOX® CL Colloidal Silica can also be used as a high temperature binder. 表示を減らす | Request Sample |
| LUDOX® CL-P | Univar Solutions | LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...もっと表示する LUDOX® CL-P can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX® CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. 表示を減らす | Request Sample |
| LUDOX® CL-X | Univar Solutions | LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may hav...もっと表示する LUDOX® CL-X can be applied as a clear surface treatment on paper and linerboard products to increase their coefficients of friction. This results in a surface with improved antiskid or antislip properties. While a number of colloidal silica grades may have possible utility, LUDOX CL-P and CL-X have been specially formulated to give superior performance and easy cleanup from coating machine surfaces. 表示を減らす | Request Sample |
| LUDOX® TMA | Univar Solutions | LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloida...もっと表示する LUDOX® TMA Colloidal Silica contains synthetic amorphous silica of nominal 22 nanometer particle size. The aqueous colloidal dispersion contains 34% silica and is slightly acidic. LUDOX® TMA Colloidal Silica is used in the preparation of “hybrid” colloidal silica – ethyl silicate binders for precision investment casting. It may also be used in applications in which sodium or alkaline components are undesirable, such as catalysts or in formulations containing polar organic solvents. 表示を減らす | Request Sample |
| LUMIFLON® FD1000 | Univar Solutions | LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weigh...もっと表示する LUMIFLON® FD1000 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weight combined with a high hydroxyl value for creating 2K waterbased polyurethane coatings with a high crosslink density. This waterborne polyol is classified as a dispersion as it is synthesized without emulsifier. This unique, emulsifier-free technology allows for the formulation of waterbased 2K polyurethane coatings with the same performance as traditional solventbased 2K coatings. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. 表示を減らす | Request Sample |
| LUMIFLON® FE-4400 | Univar Solutions | LUMIFLON® FE-4400 is a water emulsion product that was developed to meet VOC and HAPS regulations on many solvents in the U. S. FE-4400 is hydroxyl functional, and can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, FE-...もっと表示する LUMIFLON® FE-4400 is a water emulsion product that was developed to meet VOC and HAPS regulations on many solvents in the U. S. FE-4400 is hydroxyl functional, and can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, FE-4400 is used to produce coatings with high gloss and excellent weatherability. 表示を減らす | Request Sample |
| LUMIFLON® FE4300 | Univar Solutions | LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coat...もっと表示する LUMIFLON® FE4300 is fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coatings with excellent resistance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. 表示を減らす | Request Sample |
| LUMIFLON® LF-552 | Univar Solutions | LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment...もっと表示する LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment compatibility, resulting in crisp, clear colors in a broad range of colors. The major market for coil coatings made with LF-552 is in architectural coatings. 表示を減らす | Request Sample |
| LUMIFLON® LF-600X | Univar Solutions | LUMIFLON® LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is...もっと表示する LUMIFLON® LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is also being used in ambient cure applications where high coating flexibility is required, for example, in coatings for plastics. 表示を減らす | Request Sample |
| LUMIFLON® LF-710F | Univar Solutions | LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin ca...もっと表示する LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanates. Potential applications for coatings made with LF-710F include architectural (window frames and construction panels), heavy equipment coatings, and clear coats for automotive and aerospace applications. 表示を減らす | Request Sample |
| LUMIFLON® LF-810 | Univar Solutions | LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with...もっと表示する LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with LF-810 include architectural, industrial maintenance, and bridge coatings. 表示を減らす | Request Sample |
| LUMIFLON® LF200 | Univar Solutions | LUMIFLON® LF200 is a solventborne fluoroethylene vinyl ether resin designed for weather-resistant coatings. It has hydroxyl functionality and can be crosslinked with polyisocyanates. Coatings based on LF200 exhibit high gloss and excellent durability. Thi...もっと表示する LUMIFLON® LF200 is a solventborne fluoroethylene vinyl ether resin designed for weather-resistant coatings. It has hydroxyl functionality and can be crosslinked with polyisocyanates. Coatings based on LF200 exhibit high gloss and excellent durability. This product is a general purpose resin, used for heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for alternative energy applications. It is also available in a flake version called LF200F. This flake grade can be used with exempt solvents for low VOC formulations. 表示を減らす | Request Sample |
| LUMIFLON® LF200F | Univar Solutions | LUMIFLON® LF200F is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and h...もっと表示する LUMIFLON® LF200F is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and hydroxyl value making it a versatile polyol for various applications. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. 表示を減らす | Request Sample |
| LUMIFLON® LF910LM | Univar Solutions | LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2...もっと表示する LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2K crosslinkable coatings. Low molecular weight also allows for easy blending with other polyols. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. 表示を減らす | Request Sample |
| LUMIFLON® LF916F | Univar Solutions | LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with...もっと表示する LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with a high hydroxyl value for formulating highly crosslinked 2K coatings with excellent performance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. 表示を減らす | Request Sample |
| MAINCOTE™ 4950 | Univar Solutions | MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosi...もっと表示する MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosion resistance, and ease of formulation with excellent paint stability. It also offers good architectural gloss and trim paint properties. 表示を減らす | Request Sample |
| MAINCOTE™ AE-58 | Univar Solutions | MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for g...もっと表示する MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for general-purpose acrylic/epoxy paints which can be used on a variety of substrates such as exterior and interior metal and concrete. Property benefits include a long pot-life, low-temperature property response, and improved durability. 表示を減らす | Request Sample |
| MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...もっと表示する MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. 表示を減らす | Request Sample |
| MAINCOTE™ HG-56 | Univar Solutions | MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with imp...もっと表示する MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with improved stability. 表示を減らす | Request Sample |
| MAINCOTE™ PR-71 | Univar Solutions | MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. T...もっと表示する MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer. 表示を減らす | Request Sample |
| Methyl Formate | Univar Solutions | Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specific...もっと表示する Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specifically in polyurethane foams. It is also used as a chemical intermediate and solvent in the production of fine chemicals, fumigants, and insecticides. 表示を減らす | Request Sample |
| NEOPRENE 571 | Univar Solutions | NEOPRENE 571 Liquid Dispersion contains a high modulus copolymer of chloroprene and sulfur made in an anionic colloidal system. | Request Sample |
| NEOPRENE 671-A | Univar Solutions | NEOPRENE 671-A Liquid Dispersion contains a high modulus polychloroprene homopolymer made in an anionic colloidal system. | Request Sample |
| NEOPRENE 750 | Univar Solutions | NEOPRENE 750 is an anionic aqueous colloidal dispersion of a crystallization-resistant Neoprene and isextremly stable with respect to shelf and heat aging. It immediately forms strong, highly extensible films when coagulated. . | Request Sample |
| NEOPRENE 842-A | Univar Solutions | NEOPRENE 842-A Liquid Dispersion contains a medium modulus polychloroprene homopolymer made in an anionic colloidal system. | Request Sample |
| NEOPRENE NPR 2008 | Univar Solutions | NEOPRENE NPR 2008 is a high viscosity Neoprene polymer designed specifically to provide improved solution characteristics when compared to Neoprene WHV which is intended primarily for rubber goods. Raw polymer stabilility is excellent. . | Request Sample |
| NEOPRENE W | Univar Solutions | NEOPRENE W is polychloroprene homopolymer having excellent polymer stability and a fast crystallization rate. . | Request Sample |
| NEOPRENE WHV | Univar Solutions | NEOPRENE WHV is a sulfur modified crystallization resistant Neoprene polymer stabilized with a thiuram disulfide. It is designed for non-staining and general-purpose use. | Request Sample |
| NEOPRENE WHV-100 | Univar Solutions | NEOPRENE WHV-100 is a sulfur modified crystallization resistant Neoprene polymer stabilized with a thiuram disulfide. It is designed for non-staining and general-purpose use. | Request Sample |
| NEOPRENE WRT | Univar Solutions | NEOPRENE WRT is non-staining crystallization-resistant copolymers of chloroprene and 2,3-dichlora-1,3-butadiene. . | Request Sample |
| NIKANE MS 5000 | Univar Solutions | NIKANE MS 5000 is a multifunctional solvent providing enhanced performance and appearance due to improved film formation for solvent-based systems. It has a medium evaporation rate with a wide solvency and compatibility range across various polymers, resi...もっと表示する NIKANE MS 5000 is a multifunctional solvent providing enhanced performance and appearance due to improved film formation for solvent-based systems. It has a medium evaporation rate with a wide solvency and compatibility range across various polymers, resins and materials. 表示を減らす | Request Sample |
| NIPAR S-10 | Univar Solutions | NIPAR S-10 is a HAP-free, commercial-grade 1-nitropropane finds many benefits due to it's polarirty with a wide solvency range, low MIR value, low resistivity and displaces water which improves corrosion resistance. | Request Sample |
| N,N-Diethylethanol-amine | Univar Solutions | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...もっと表示する N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. 表示を減らす | Request Sample |
| OPTIGEL® CK | Univar Solutions | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...もっと表示する OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. 表示を減らす | Request Sample |
| OPTIGEL® WX | Univar Solutions | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...もっと表示する OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. 表示を減らす | Request Sample |
| OROTAN™ 731 DP | Univar Solutions | OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosi...もっと表示する OROTAN™ 731 DP is a formaldhyde free, free flowing, spray dry powder dispersant providing good gloss and hiding power at economical use levels. When formulated with a high performance binder and other high-quality additives, it can provide greater corrosion resistance for flat primers, low VOC paints, interior and exterior flat, sheen, and semi-gloss paints, and glossy topcoats. It lends to improved dispersing, stability, and film properties in a broad array of coating systems. 表示を減らす | Request Sample |
| OXFILM 351 | Univar Solutions | OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required...もっと表示する OXFILM 351 is a low odor, almost zero VOC coalescing agent. By definition, a non-VOC remains in the dried film where OXFILM 351 acts as a permanent plasticizer yielding a slightly softer film. To compensate, a slightly harder, higher Tg, resin is required to obtain the desired final film hardness. OXFILM 351 is not designed to be a drop-in replacement for traditional ester alcohol or glycol ether coalescents. It is intended for next generation low odor, low VOC coatings. Use of a slightly harder polymer is recommended to compensate for its permanence and plasticizing effect in the dried film. Low odor, extremely low 28 day emission results are achievable with OXFILM 351 when properly formulated. 表示を減らす | Request Sample |
| OZ WHITE™ | Univar Solutions | OZ WHITE™ is a dry ground limestone marble with a very coarse particle size that is controlled between 6 mesh and 14 mesh. Textured coatings and water treatment are the main applications. OZ WHITE™ is suited for use in textured coatings and stuccos based...もっと表示する OZ WHITE™ is a dry ground limestone marble with a very coarse particle size that is controlled between 6 mesh and 14 mesh. Textured coatings and water treatment are the main applications. OZ WHITE™ is suited for use in textured coatings and stuccos based on cement of acrylics, acid neutralization, and water filtration systems. 表示を減らす | Request Sample |
| PAPI 20 | Univar Solutions | PAPI 20 is a polymethylene polyphenylisocyanate that contains MDI. This product`s functionality value of 3.2 and high viscosity result in highly rigid foams. This product is designed for uses where high viscosity is required for processing polyisocyanurat...もっと表示する PAPI 20 is a polymethylene polyphenylisocyanate that contains MDI. This product`s functionality value of 3.2 and high viscosity result in highly rigid foams. This product is designed for uses where high viscosity is required for processing polyisocyanurate foams. 表示を減らす | Request Sample |
| PAPI 23 | Univar Solutions | PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic...もっと表示する PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic (VE) and high resiliency (HR) foams. 表示を減らす | Request Sample |
| PAPI 27 | Univar Solutions | PAPI 27 is a polymethylene polyphenylisocyanate that contains MDI. This product has a narrow molecular weight distribution and a high reactivity. Applicable to many foam processes, this product is compatible with rigid polyether and polyester polyols, mak...もっと表示する PAPI 27 is a polymethylene polyphenylisocyanate that contains MDI. This product has a narrow molecular weight distribution and a high reactivity. Applicable to many foam processes, this product is compatible with rigid polyether and polyester polyols, making it suitable for a full range of low- to high-density semi-rigid foams, rigid foams and structural RIM processing. 表示を減らす | Request Sample |
| PAPI 580N | Univar Solutions | PAPI 580N is a polymethylene polyphenylisocyanate that contains MDI. This product has a high functionality and a relatively high viscosity. Recommended for use in polyisocyanurate rigid foams, this product imparts good resistance to heat distortion, excel...もっと表示する PAPI 580N is a polymethylene polyphenylisocyanate that contains MDI. This product has a high functionality and a relatively high viscosity. Recommended for use in polyisocyanurate rigid foams, this product imparts good resistance to heat distortion, excellent strength properties at low densities and improved humid age stability. 表示を減らす | Request Sample |
| PAPI 94 | Univar Solutions | PAPI 94 is A polymethylene polyphenylisocyanate that contains MDI. This product’s low viscosity, low functionality, increased diphenylmethane diisocyanate content and increased percentage of orthopara isomers make PAPI 94 polymeric MDI highly versatile. ...もっと表示する PAPI 94 is A polymethylene polyphenylisocyanate that contains MDI. This product’s low viscosity, low functionality, increased diphenylmethane diisocyanate content and increased percentage of orthopara isomers make PAPI 94 polymeric MDI highly versatile. This product also offers delayed gel times, which results in better flow into molds for semiflexible and integral skin foams. 表示を減らす | Request Sample |
