| Epoxy Hot Melt Adhesive (Formulation #RRS 2110) | Hoffmann Mineral | This epoxy hot melt adhesive features SILLITIN V 85. | |
| HIKOREZ T-3100 | Kolon | HIKOREZ T-3100 is a modified aliphatic hydrocarbon resin. HIKOREZ T-3100 was developed for solvent based pressure sensitive adhesive tapes, hot melt pressure adhesives and hot melt adhesives. | |
| HIKOREZ A-1115 | Kolon | HIKOREZ A-1115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ A-2115 | Kolon | HIKOREZ A-2115 is a pale yellow thermoplastic resin which is used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1080 | Kolon | HIKOREZ T-1080 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...もっと表示する A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. 表示を減らす | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...もっと表示する A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. 表示を減らす | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| BNX® 1037 | Mayzo, Inc. | BNX® 1037 is a high performance multifunctional antioxidant. This product has improved color stability and superior viscosity stability in hot melt adhesives after heat aging, is more effective prevention of skin formation in hot melt adhesives, and can b...もっと表示する BNX® 1037 is a high performance multifunctional antioxidant. This product has improved color stability and superior viscosity stability in hot melt adhesives after heat aging, is more effective prevention of skin formation in hot melt adhesives, and can be used without co-stabilizers due to its unique chemical structure. BNX® 1037 is used in hot melt adhesives based on unsaturated styrenic copolymers (SIS, SBS, SBR, etc.), solvent-based adhesives, water-based adhesives, unsaturated styrenic copolymers, and polyurethanes. 表示を減らす | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| HIKOREZ H-2300 | Kolon | HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethyl...もっと表示する HIKOREZ H-2300 is a light color thermoplastic resin which is primarily applied to hot melt based pressure sensitive adhesives. HIKOREZ H-2300 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as Ethylene Vinyl Acetate and Styrene Isoprene Styrene. 表示を減らす | |
| HIKOREZ T-2093 | Kolon | HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of i...もっと表示する HIKOREZ T-2093 is a pale yellow thermoplastic resin which is primarily used as in hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-2093 also can be used as tackifier for hot melt adhesives because of its compatibility with base polymer such as EVA. 表示を減らす | |
| HIKOREZ H-2200 | Kolon | HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Sty...もっと表示する HIKOREZ H-2200 is a light color thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesive. HIKOREZ H-2200 also can be used as tackifier for hot melt adhesives, because of its good compatibility with base polymer such as Styrene Butadiene Styrene and Styrene Isoprene Styrene. 表示を減らす | |
| BNX® 3595 | Mayzo, Inc. | BNX® 3595 is a multifunctional antioxidant specially developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX® 3595 is also useful for the stabilization of hot melt...もっと表示する BNX® 3595 is a multifunctional antioxidant specially developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX® 3595 is also useful for the stabilization of hot melt adhesives (especially those derived from unsaturated elastomers) and rosin ester tackifier resins. 表示を減らす | |
| GRANOLITE P | DRT (Les Derives Resiniques et Terpeniques) | It is a light-colored and deodorised resin suitable in various adhesive and road marking Hot Melt formulations. | |
| GRANOLITE P 118 | DRT (Les Derives Resiniques et Terpeniques) | It is a pentaerythritol ester of rosin, showing a high softening point, mainly recommanded for Hot Melt formulations. | |
| HIKOREZ H-2130 | Kolon | HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...もっと表示する HIKOREZ H-2130 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because it is compatible with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 表示を減らす | |
| BNX™ 565 | Mayzo, Inc. | BNX™ 565 is a high molecular weight; non-staining, multifunctional antioxidant developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX™ 565 is useful for the stabi...もっと表示する BNX™ 565 is a high molecular weight; non-staining, multifunctional antioxidant developed for the stabilization of unsaturated elastomers (BR, IR, SBR, SIS, SBS, etc.), hot melt adhesives, and rosin ester tackifier resins. BNX™ 565 is useful for the stabilization of hot melt adhesives (especially those derived from unsaturated elastomers) and rosin ester tackifier resins. 表示を減らす | |
| G-100 Modified Petroleum Resin (C5/C9) | Yangzhou Sunchem Co., Ltd. | G-100 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. ...もっと表示する G-100 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. It can also be used in inks and pressure sensitive adhesives and sealants. 表示を減らす | |
| G-110 Modified Petroleum Resin (C5/C9) | Yangzhou Sunchem Co., Ltd. | G-110 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. ...もっと表示する G-110 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. It can also be used in inks and pressure sensitive adhesives and sealants. 表示を減らす | |
| HIKOREZ H-2100 | Kolon | HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot me...もっと表示する HIKOREZ H-2100 is a light color thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins/diolefins derived from the process of thermal cracking of naphtha. The primary applications are hot melt based pressure sensitive adhesive, hot melt adhesive, because of its good compatibility with base polymer such as Styrene Isoprene Styrene and Ethylene Vinyl Acetate. 表示を減らす | |
| Pinerez® 9089 | Lawter | Pinerez® 9089 is a tackifier resin that helps to improve tack in hot melt adhesives and also functions as a cure accelerator in rubber-based adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive ...もっと表示する Pinerez® 9089 is a tackifier resin that helps to improve tack in hot melt adhesives and also functions as a cure accelerator in rubber-based adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. 表示を減らす | |
| HIKOREZ R-1095 | Kolon | HIKOREZ R-1095 is a pale yellow thermoplastic resinwhich is primarily used as a binder for hot melt road marking. | |
| HIKOREZ R-1100S | Kolon | HIKOREZ R-1100S is a pale yellow thermoplastic which is used primarily as a binder for hot melt road marking. | |
| DERTOPHENE T 105 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It improves the properties of hot melt or solvent adhesives. | |
| DERTOPHENE T 115 | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers. It is suitable for use in solvent based and hot melt based adhesives. | |
| Pinerez® 2490 | Lawter | Pinerez® 2490 is a tackifier resin that boosts adhesion and tack in a variety of hot melt and solvent-based adhesives. It is commonly used in pavement coatings. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt ...もっと表示する Pinerez® 2490 is a tackifier resin that boosts adhesion and tack in a variety of hot melt and solvent-based adhesives. It is commonly used in pavement coatings. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. 表示を減らす | |
| DERTOLINE P2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with pentaerythritol. It is a tackifying resin mainly recommended for hot melt adhesives based on EVA copolymers. | |
| DERTOLINE G2L | DRT (Les Derives Resiniques et Terpeniques) | A tall oil resin esterified with glycerol. It is a tackifying resin particularly recommended for hot melt adhesives based on EVA or block copolymers. | |
| HIKOTACK P-120H | Kolon | HIKOTACK P-120H is pale yellow thermoplastic resin which is primarily used as a modifying resin for paint & ink products and hot melt adhesives. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| KRATON® D1171 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt...もっと表示する KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 表示を減らす | |
| KRATON® D1171 PT Polymer | Univar Solutions | KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt...もっと表示する KRATON® D1171 PT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1171 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 表示を減らす | Request Sample |
| KRATON® D1173 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1173 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt...もっと表示する KRATON® D1173 BT Polymer is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 18%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1173 BT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, and hot melt adhesives. 表示を減らす | |
| DERTOPHENE T | DRT (Les Derives Resiniques et Terpeniques) | A terpene phenolic resin compatible with various elastomers, resins and waxes. It is used to improve the properties of hot melt or solvent based adhesives. | |
| DERTOPHENE H 150 | DRT (Les Derives Resiniques et Terpeniques) | DERTOPHENE H 150 is a terpene phenolic resin showing a high polarity. It is suitable for use in solvent based and hot melt based adhesives. | |
| DERCOLYTE A 115 | DRT (Les Derives Resiniques et Terpeniques) | A tackifying resin especially recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| DERTOLINE PLS | DRT (Les Derives Resiniques et Terpeniques) | A highly stabilized tall oil rosin esterified with pentaerythritol. It is a tackifying resin mainly suitable for hot melt adhesives based on EVA or block copolymers. | |
| Nichigo-Polyester SP180 | Nippon Gohsei | Nichigo-Polyester SP180 is a high molecular weight saturated polyester resin featuring microcrystalline solvent solubility. This product is well suited for use in hot melt adhesive applications. | |
| Nichigo-Polyester SP181 | Nippon Gohsei | Nichigo-Polyester SP181 is a high molecular weight saturated polyester resin featuring microcrystalline solvent solubility. This product is well suited for use in hot melt adhesive applications. | |
| Nichigo-Polyester SP182 | Nippon Gohsei | Nichigo-Polyester SP182 is a high molecular weight saturated polyester resin featuring microcrystalline solvent solubility. This product is well suited for use in hot melt adhesive applications. | |
| Nichigo-Polyester SP154 | Nippon Gohsei | Nichigo-Polyester SP154 is a high molecular weight saturated polyester resin with a medium melting point. This product is well suited for use in hot melt adhesive applications. | |
| DERCOLYTE A 125 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE A 125 is a tackifying resin recommended to improve the adhesive properties of hot melt formulations or solvent adhesives. It is produced from the polymerization of alpha pinene. | |
| Nichigo-Polyester SP170 | Nippon Gohsei | Nichigo-Polyester SP170 is a high molecular weight saturated polyester resin featuring a low melting point. This product is well suited for use in hot melt adhesive and PVC backing applications. | |
| HIKOTACK DP-100 | Kolon | HIKOTACK DP-100 is pale yellow thermoplastic resin. HIKOTACK DP-100 can be used as a vehicle for paint products as well as a tackifier for EVA based hot melt adhesives. | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-120P | Kolon | HIKOTACK P-120P is pale yellow thermoplastic resin which is primarily used as a vehicle for other chemicals in the coating industry and tackifier for Ethylene Vinyl Acetate based hot melt adhesives. | |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| PICCOTAC 8095 | Univar Solutions | PICCOTAC 8095 is a moderate softening point, aromatic modified C5 resin. This light colored resin is designed to provide better odor and more cohesion than rosin esters for hot-melt packaging applications. | Request Sample |
| Resinate® A0351-12 Green Strength Performance Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0351-12 is a developmental solid crystalline polyester polyol with excellent green strength, and excellent water and chemical resistance. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are...もっと表示する Resinate® A0351-12 is a developmental solid crystalline polyester polyol with excellent green strength, and excellent water and chemical resistance. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. 表示を減らす | |
| NEVTAC® 10 | Neville Chemical Company | NEVTAC® 10 is a liquid pale amber colored resin that is compatible with aliphatic polymers and waxes. It has applications in pressure sensitive and hot melt adhesives and roofing and butyl elastomer tackifiers. | |
| Nichigo-Polyester SP185 | Nippon Gohsei | Nichigo-Polyester SP185 is a high molecular weight saturated polyester resin featuring microcrystalline solvent solubility. This product is well suited for use in hot melt adhesives, laminates, polyester adhesives, and PVC backing applications. | |
| Nichigo-Polyester SP160 | Nippon Gohsei | Nichigo-Polyester SP160 is a high molecular weight saturated polyester resin featuring a high melting point and good heat and oil resistance. This product is well suited for use in hot melt adhesive applications. | |
| Nichigo-Polyester SP176 | Nippon Gohsei | Nichigo-Polyester SP176 is a high molecular weight saturated polyester resin featuring a high melting point and good heat and oil resistance. This product is well suited for use in hot melt adhesive applications. | |
| RA-150W Release Coat | Mayzo, Inc. | RA-150W Release Coat is a high quality release coating. It provides excellent release, even in high humidity environments. RA-150W Release Coat is used in solvent acrylics, hot-melt adhesives, and print varnishes. | |
| KRATON™ DX405 J | Univar Solutions | KRATON™ DX405 J is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 24% mass. It is used for printing plates, UV cured, solvent borne and hot melt adhesive applications. | Request Sample |
| BNX® 2246 | Mayzo, Inc. | BNX® 2246 is a sterically hindered phenol antioxidant and thermal stabilizer. It provides effective stabilization in ABS, EVA, polypropylene and polyethylene. Typical applications include hot-melt adhesives, natural rubber adhesives, ABS, EVA, polypropyl...もっと表示する BNX® 2246 is a sterically hindered phenol antioxidant and thermal stabilizer. It provides effective stabilization in ABS, EVA, polypropylene and polyethylene. Typical applications include hot-melt adhesives, natural rubber adhesives, ABS, EVA, polypropylene and polyethylene. 表示を減らす | |
| REGALITE S-1100 | Univar Solutions | REGALITE S-1100 is a low molecular weight fully hydrogenated water-white thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as tackifier in hot melt adhesives requiring good color retention upon ageing. | Request Sample |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...もっと表示する nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. 表示を減らす | |
| DERCOLYTE TS 105 | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE TS 105 is a very light colored tackifying resin showing excellent adhesive performances with block copolymers, especially in hot melt, pressure sensitive adhesives formulations. It is produced from the copolymerisation of terpene and styrene. | |
| Nichigo-Polyester MSP-640 | Nippon Gohsei | Nichigo-Polyester MSP-640 is a high molecular weight saturated polyester resin that is tack-free after coating and drying. This product is well suited for use in hot melt adhesives and roll-up film applications. | |
| REGALITE R-1100 | Univar Solutions | REGALITE R-1100 is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon agin...もっと表示する REGALITE R-1100 is a low molecular weight fully hydrogenated, water-white, inert, thermoplastic resin derived from petrochemical feedstocks. This resin is especially designed as tackifier in hot-melt adhesives requiring excellent color retention upon aging. 表示を減らす | Request Sample |
| SILQUEST* A-LINK 597 SILANE | Momentive Performance Materials | Silquest* A-Link 597 silane functions as an adhesion promoter for a variety of substrate/matrix resin combinations. It is especially useful in high performance hot melt adhesives and other applications where exposure to sustained temperatures might occur...もっと表示する Silquest* A-Link 597 silane functions as an adhesion promoter for a variety of substrate/matrix resin combinations. It is especially useful in high performance hot melt adhesives and other applications where exposure to sustained temperatures might occur. 表示を減らす | |
| CRYSTAZENE 110 | DRT (Les Derives Resiniques et Terpeniques) | CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, a...もっと表示する CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, and for plastic film modification. 表示を減らす | |
| REGALITE R-1125 | Univar Solutions | REGALITE R-1125 is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers. | Request Sample |
| RF95 | Guangxi Zhongchang Resin Co., Ltd. | RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters...もっと表示する RF95 is a light yellow flaky solid and a glycerol modified pentaerythritol ester. This product is designed for hot-melt adhesives and provides storage stability, hot oxidation resistance and light color in addition to tackification. It dissolves in esters, azulene ketones and aromatic hydrocarbon. 表示を減らす | |
| HAITACK™ JH‐3001 | Mayzo, Inc. | HAITACK™ JH‐3001 is a hydrocarbon resin. It avoids adhesion to compounding equipment, has lower hardness and modulus of compound after vulcanization, and improves extension performance. HAITACK™ JH‐3001 is used in pressure sensitive adhesives and hot melt...もっと表示する HAITACK™ JH‐3001 is a hydrocarbon resin. It avoids adhesion to compounding equipment, has lower hardness and modulus of compound after vulcanization, and improves extension performance. HAITACK™ JH‐3001 is used in pressure sensitive adhesives and hot melt adhesives. 表示を減らす | |
| Estergum-752 | D.S.V. Chemicals Pvt. Ltd. | Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...もっと表示する Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. 表示を減らす | |
| HIKOTACK P-90I | Kolon | HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with vario...もっと表示する HIKOTACK P-90I is pale yellow thermoplastic resin which is primarily used tackifier for Ethylene Vinyl Acetate copolymer based hot melt adhesives. HIKOTACK P-90I is compatible with numerous polymers as well as EVA, and provides good solubility with various solvents. 表示を減らす | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| HAITACK™ JH-3200 | Mayzo, Inc. | HAITACK™ is a premium aromatic modified aliphatic C5 hydrocarbon resin with narrow molecular weight distribution. It is a transparent light yellow solid and has a softening point of 92 Celsius. HAITACK™ JH-3200 is used in pressure sensitive hot melt adhes...もっと表示する HAITACK™ is a premium aromatic modified aliphatic C5 hydrocarbon resin with narrow molecular weight distribution. It is a transparent light yellow solid and has a softening point of 92 Celsius. HAITACK™ JH-3200 is used in pressure sensitive hot melt adhesives. 表示を減らす | |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Bitoner® Resin C2130 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot m...もっと表示する Bitoner® Resin C2130, in the form of a slightly yellow granular, is low molecular weight, C9 modified C5 hydrocarbon resin. It has low odor, low volatility, good heat stability, good compatibility, and recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 表示を減らす | |
| SONGNOX® 1024 | Songwon International AG | SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (...もっと表示する SONGNOX® 1024 is a metal deactivator and antioxidant for wire and cable, adhesive (both hot melt and solution), and powder coatings applications. It can be used as the primary antioxidant or can be used in combination with hindered phenolic antioxidants (particularly SONGNOX® 1010) to achieve synergistic performance. 表示を減らす | |
| Ancamine® 2337S | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepreg...もっと表示する Ancamine® 2337S curing agent is a modified aliphatic amine designed for use as a latent curing agent for epoxy resins. Applications for this product include one-component conduction or induction heat-cure adhesives, potting, coatings, and hot-melt prepregs. This product is a light yellow powder. 表示を減らす | Request Sample |
| BNX® 1225 TPR | Mayzo, Inc. | BNX® 1225 TPR is a pelletized blend of BNX® 1225 and a SIS (styrene-isoprenestyrene) thermoplastic rubber. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility. BNX® 1225 TPR is used in hot-melt...もっと表示する BNX® 1225 TPR is a pelletized blend of BNX® 1225 and a SIS (styrene-isoprenestyrene) thermoplastic rubber. This blend of both a primary and secondary antioxidant provides excellent heat stability and antioxidation, with good compatibility. BNX® 1225 TPR is used in hot-melt pressure sensitive adhesives. 表示を減らす | |
| Resinate® A0353-75 Multi-Purpose Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0353-75 is a developmental solid semi-crystalline polyester polyol made with 74.5% recycled and renewable content. It is ideal for demanding reactive hot melt adhesive applications on a variety of plastic substrates. Balanced crystalline and am...もっと表示する Resinate® A0353-75 is a developmental solid semi-crystalline polyester polyol made with 74.5% recycled and renewable content. It is ideal for demanding reactive hot melt adhesive applications on a variety of plastic substrates. Balanced crystalline and amorphous phase, good adhesion on a variety of plastic surfaces, excellent water and chemical resistance. 表示を減らす | |
| Resinate® A0352-73 High-Performance Polyol for RHMA | Resinate Materials Group, Inc. | Resinate® A0352-73 is a developmental solid crystalline polyester polyol made with 73.2% renewable content. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. Strong crystalline a...もっと表示する Resinate® A0352-73 is a developmental solid crystalline polyester polyol made with 73.2% renewable content. It is ideal for demanding reactive hot melt adhesive applications where green strength and performance are key considerations. Strong crystalline and amorphous phase, good adhesion on high and medium surface energy plastics, excellent water and chemical resistance. 表示を減らす | |
| Bitoner® Resin BT-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, rubber, sealants, and hot melt...もっと表示する Bitoner® Resin BT-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, rubber, sealants, and hot melt adhesives. 表示を減らす | |
| Bitoner® Resin BT-1102 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, coatings, sealants, and hot melt...もっと表示する Bitoner® Resin BT-1102, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aliphatic resin. It has good chemical stability, water resistance, good affinity with a wide range of fillers, and has recommended applications in thermoplastic road marking paints, coatings, sealants, and hot melt adhesives. 表示を減らす | |
| REGALITE S-5100 | Univar Solutions | REGALITE S-5100 is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as a tackifier in hot melt adhesives based on Sis and SBS block copolymers, where it provides...もっと表示する REGALITE S-5100 is an unique partially hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstock. This resin is especially designed as a tackifier in hot melt adhesives based on Sis and SBS block copolymers, where it provides superior room temperature cohesion combined with very low adhesive viscosity. 表示を減らす | Request Sample |
| BNX® 1000 | Mayzo, Inc. | BNX® 1000 is a unique proprietary blended liquid antioxidant system. It provides ease in blending and should result in lower loading requirements since it disperses completely, virtually eliminating the particle dispersion problems associated with traditional powder antioxidants. BNX® 1000 is used in hot melt...もっと表示する BNX® 1000 is a unique proprietary blended liquid antioxidant system. It provides ease in blending and should result in lower loading requirements since it disperses completely, virtually eliminating the particle dispersion problems associated with traditional powder antioxidants. BNX® 1000 is used in hot melt and water base adhesive systems. 表示を減らす | |
| Bitoner® C9 Resin BP-150 | Qingdao Bater Chemical Co., Ltd. | Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt...もっと表示する Bitoner® C9 Resin BP-150, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, aromatic resin. It has good compatibility with rosin modified phenolic resins, water resistance, and recommended applications in sealants, solvent based adhesives, rubber, coatings, PSA, printing ink, and hot melt adhesives. 表示を減らす | |
| Bitoner® Resin TR-120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt...もっと表示する Bitoner® Resin TR-120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C9 hydrocarbon resin. . It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 表示を減らす | |
| Domide G-700 | Kukdo Chemical Co., Ltd. | Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based mainten...もっと表示する Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based maintenance coatings, primers, sealers and coatings for concrete. 表示を減らす | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...もっと表示する HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. 表示を減らす | |
| Bitoner® Resin LH-3100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt...もっと表示する Bitoner® Resin LH-3100, in the form of a water white granular, is hydrogenated C9 hydrocarbon resin. It has good heat stability, good chemical stability, odorless, low VOC, and good compatibility with various polymers. LH-3100 has recommended applications in sealants, coatings, ink, pressure sensitive adhesives, and hot melt adhesives. 表示を減らす | |
| Bitoner® Resin TR-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt...もっと表示する Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 表示を減らす | |
| Bitoner® Resin TR-2080 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt...もっと表示する Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. 表示を減らす | |
| Bitoner® Resin C-2120 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt...もっと表示する Bitoner® Resin C-2120, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 表示を減らす | |
| Bitoner® Resin C-2125 | Qingdao Bater Chemical Co., Ltd. | Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt...もっと表示する Bitoner® Resin C-2125, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, modified C5 hydrocarbon resin. It has good heat stability, low odor, good compatibility, and solubility in various solvents. C-2120 has recommended applications in hot melt adhesives, sealants, solvent based PSA, HMPSA, and coatings. 表示を減らす | |
| Brassylic Acid (DC13T) | Cathay Industrial Biotechnology | Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high performance polyamides/nylon, hot melt...もっと表示する Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high performance polyamides/nylon, hot melt adhesives, and more. 表示を減らす | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt...もっと表示する Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. 表示を減らす | |
| Undecanedioic Acid (DC11P) | Cathay Industrial Biotechnology | Undecanedioic Acid (DC11P), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)nCOOH. It has recommended applications in corrosion inhibitors, hot melt...もっと表示する Undecanedioic Acid (DC11P), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)nCOOH. It has recommended applications in corrosion inhibitors, hot melt adhesives, high performance polyamides/Nylon, and more. 表示を減らす | |
| nolax M11.185 | nolax AG (Vanora) | nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin c...もっと表示する nolax M11.185 is a solid, cloudy yellow colored, non-skin irritating, pressure sensitive hot melt adhesive that can be applied by slot-die and nozzle, screen printing systems and roll coating for self-adhesive coating of products that are in direct skin contact. Tests for dermatological harmless approval must be checked, for each application. 表示を減らす | |
| Aliphatic C5 Hydrocarbon Resin E1102 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 2...もっと表示する Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 28. It can also be used as a modifier in polymer & rubber compounding and film applications. 表示を減らす | |
| Aliphatic C5 Hydrocarbon Resin E1202 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23...もっと表示する Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23. It can also be used as a modifier in polymer & rubber compounding and film applications. 表示を減らす | |
| Aliphatic C5 Hydrocarbon Resin E1304 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29...もっと表示する Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29. It can also be used as a modifier in polymer & rubber compounding and film applications. 表示を減らす |
