| ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...もっと表示する ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. 表示を減らす |  |
| Bubble Viscometers | BYK-Gardner USA | BYK-Gardner bubble viscometers are used to quickly determine kinematic viscosity of known liquids such as resins and varnishes. |  |
| Cone and Plate Viscometer | BYK-Gardner USA | The versatility of the CAP 1000+ and CAP 2000+ makes these instruments a practical tool for any QC or R&D lab requiring quick and easy testing of materials, regardless of application, at high shear rates. |  |
| Digital KU-2 | BYK-Gardner USA | The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or ...もっと表示する The Digital KU-2 viscometer provides a direct digital reading in Krebs units (KU), centipoise, and grams (gm). This simplifies an established test procedure providing an immediate calculation of the viscosity value. The viscometer automatically starts or stops by lowering or raising the viscometer. The KU-2 automatically establishes the correct rotational speed to comply with ASTM method D 562. 表示を減らす |  |
| DV-E Rotational Viscometer | BYK-Gardner USA | DV-E Rotational Viscometer has simplified controls, which allow operators to change test parameters quickly with the push of a switch and turn of a knob. The digital display ensures easy and accurate readout of results for simultaneous measurements of vis...もっと表示する DV-E Rotational Viscometer has simplified controls, which allow operators to change test parameters quickly with the push of a switch and turn of a knob. The digital display ensures easy and accurate readout of results for simultaneous measurements of viscosity and torque. 表示を減らす |  |
| Fluidicam™ RHEO | Formulaction Inc. | A novel device, the Fluidicam™ RHEO is a microfluidic rheometer where the viscosity of samples are visually measured under shear and temperature sweeps. Strong confinement of flow of a sample and a reference solution inside of a microfluidic chip allows f...もっと表示する A novel device, the Fluidicam™ RHEO is a microfluidic rheometer where the viscosity of samples are visually measured under shear and temperature sweeps. Strong confinement of flow of a sample and a reference solution inside of a microfluidic chip allows for fast analysis of samples in the matter of minutes. Over five orders of magniture of shear and six orders of magnitude of viscosity can be measured with a single set of disposable chips while utilizing only milliliters per flow curve or as low as 100 microliters per point. 表示を減らす |  |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...もっと表示する FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. 表示を減らす |  |
| High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...もっと表示する High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. 表示を減らす |  |
| Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...もっと表示する Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. 表示を減らす |  |
| MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...もっと表示する MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. 表示を減らす |  |
| RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...もっと表示する RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. 表示を減らす |  |
| Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...もっと表示する Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. 表示を減らす |  |
| Rotational Viscometers | BYK-Gardner USA | Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; ...もっと表示する Rotational Viscometers have become a standard in virtually all industries. They measure viscosity by sensing the torque required to rotate a spindle at constant speed while immersed in fluid. The torque is proportional to the viscous drag on the spindle; thus the sample viscosity. 表示を減らす |  |
| Viscosity Cups | BYK-Gardner USA | A flow cup, sometimes called an efflux cup or viscosity cup, is a simple gravity device that measures the timed flow of a known volume of liquid passing through an orifice located at the bottom of the shaped cup. |  |
