UL Prospector

成功しました

検索の保存に成功しました
Request Sample #1 Castor Oil Acme Hardesty Co. #1 Castor Oil is one of the oldest and most versatile products in use today. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. As a natural polyol, it is commanding increasing attention as a highly...もっと表示する #1 Castor Oil is one of the oldest and most versatile products in use today. It is a natural product, made from the beans of the castor plant which can be grown in any tropical region. As a natural polyol, it is commanding increasing attention as a highly effective ingredient in polyurethane applications, replacing the traditional petroleum based polyols. This product can be used as a carrier for pigments and dyes in paints, coatings, and inks, and as an ingredient in alkyd resins used in varnishes and coatings. 表示を減らす
#249 HI-TECH PCI Group, Inc. #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems.
(1) NATCATalyst 140 NiCHEM CORP. NATCATalyst 140 is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA, and is in isopropanol.
(2) NATCATalyst 170 NiCHEM CORP. NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an ambe...もっと表示する NATCATalyst 170 is designed to promote the reaction between resin hydroxyls and fully alkylated amino resins and also epoxy and amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is an amber liquid that is 70% dodecylbenzene sulfonic acid in isopropanol. 表示を減らす
(3) FASTCATaylst B25 NiCHEM CORP. FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25%...もっと表示する FASTCATaylst B25 is designed to promote the reaction between resin hydroxyls, epoxy, amino resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. It is a clear to amber liquid in isopropanol that is 25% p-TSA. 表示を減らす
(3,3,3 Tri FluoroPropyl) Methyl Di-Methoxy Silane FD-1001 Zhejiang Feidian Chemical Co., Ltd. FD-1001 is a (3,3,3 tri fluoro propyl) methyl di-methoxy silane. It is supplied as a colorless liquid.
(4) NATCATalyst 140B NiCHEM CORP. NATCATalyst 140B is a general purpose strong acid catalyst for use in various solvent soluble and water-based thermosetting resin systems. It is a clear liquid that is 40% p-TSA that is in n-Butanol.
(5) NATCATalyst 229B NiCHEM CORP. NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butano...もっと表示する NATCATalyst 229B is a general purpose strong acidic catalyst for the usein various solvent soluble thermosetting resin systems. It improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids in n-Butanol. 表示を減らす
(6) NATCATalyst 229W NiCHEM CORP. NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and...もっと表示する NATCATalyst 229W is a general purpose strong acid catalyst for use in various waterbase thermosetting resin systems. It promotes the reaction of lower acid value resins at lower temperatures and higher solids. This product improves the curing process and does not cause wrinkling. It is a clear liquid that is 50% mixed sulfonic acids, and is in water. 表示を減らす
1,10-Phenanthroline Anhydrous Hainan Zhongxin Chemical Co., Ltd. 1,10-Phenanthroline Anhydrous ,synonymous with O-Phenanthroline, is a white powder that is 99% pure. It is primarily used as an analysis reagent, it can be used as an additive in the field of electroplating.
1,2-Bis(Tetrabromophthalimido) Ethane Hainan Zhongxin Chemical Co., Ltd. 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC a...もっと表示する 1,2-bis(Tetrabromophthalimido) Ethane, synonymous with BT-93W and ethylene bis-(tetrabromophthalimide), is a white powder of about 5µm max that is 66.5% pure. It is primarily used as a flame retardant in plastics and paints including: HIPS, ABS, ABS/PC alloy, PC, LDPE and PBT. 表示を減らす
1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 Zhejiang Feidian Chemical Co., Ltd. FD-1000 is a 1,3,5-Trimethyl-1,3,5-tris(3,3,3-trifluoropropyl)cyclotrisiloxane. It is supplied in white crystal form.
1201 Slurry® Imerys Performance Additives 1201 Slurry® is a pre-dispersed, delaminated kaolin produced from a water-fractionated feed with a carefully controlled particle size and platy shape. The plate-like structure provides barrier properties in many applications, such as good enamel holdout, ...もっと表示する 1201 Slurry® is a pre-dispersed, delaminated kaolin produced from a water-fractionated feed with a carefully controlled particle size and platy shape. The plate-like structure provides barrier properties in many applications, such as good enamel holdout, stain resistance, and washability in interior emulsion paint systems. 表示を減らす
1405 Slurry Imerys Performance Additives 1405 Slurry is made from a high brightness clay with a naturally engineered steep particle size distribution.
15% POTASSIUM HEX-CEM Borchers, A Company of OMG 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is...もっと表示する 15% POTASSIUM HEX-CEM is a potassium 2-ethylhexanoate dissolved in diethylen diglycol which combined with cobalt supports the accelerating effect in unsaturated polyesters. This results in a decrease of discoloration of UPS-Systems caused by Cobalt. It is also capable of stabilizing the rheological and the pot life behaviour of waterborne 2-components PUR systems, and it can positively affect the haze-values of these paint systems. 表示を減らす
2,2-Dibromo-3-Nitrilopropionamide (DBNPA) ChemFine International Co., Ltd. 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive.
2,4,7,9-Tetramethyl-decyne-5-diol-4,7, TMDD BASF Corporation, Chemical Intermediates 2,4,7,9-Tetramethyl-Decyne-5-Diol-4,7, TMDD is an antifoaming and wetting agent for water-borne coatings and inks. TMDD is suitable for all water-borne coatings (ED-coatings, water-borne stoving enamels, water-borne house and wall paints) and inks.
2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) Hainan Zhongxin Chemical Co., Ltd. 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 29...もっと表示する 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 290-400 nm wavelength. It is applicable to paint and various plastic products, particular effective to polyvinyl chloirde, polystyrene, polyurethane and acrylic resins. 表示を減らす
Request Sample 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane Dalian Onichem Co., Ltd. 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is a coupling and crosslinking agent for waterborne systems. 2-(3,4-Epoxycyclohexyl) Ethyltriethoxysilane is used in latexes and PUD.
Request Sample 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane Dalian Onichem Co., Ltd. 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is a coupling agent for epoxy composites. 2-(3,4-Epoxycyclohexyl) Ethyltrimethoxysilane is compatible with cationic cure chemistries.
2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) Hainan Zhongxin Chemical Co., Ltd. 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recomm...もっと表示する 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recommended for use in polyolefine, poyvinyl chlornamee, polystyrene etc. 表示を減らす
2-(Morpholinothio)benzothiazole Hainan Zhongxin Chemical Co., Ltd. 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an ...もっと表示する 2-(Morpholinothio)benzothiazole, synonymous with NOBS (MBS) is faint yellow or orange granules that are at least 95% pure. It is an after-effect quick accelerator which can increase scorching time and improve processing safety. It is primarily used as an accelerator in the production rubbers and adhesives. 表示を減らす
2-ETHYL-1,3-HEXANEDIOL (OCTANEDIOL) KH Neochem Americas, Inc. A Chelating agent.
2-Ethylhexanoic Acid Perstorp 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...もっと表示する 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. 表示を減らす
Request Sample 2-HEMA-Phosphate Kowa American Corp/ San Esters Corp. 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Pho...もっと表示する 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Phosphate can be used in pigment systems to promote adhesion. 表示を減らす
2-Mercaptobenzothiazole Hainan Zhongxin Chemical Co., Ltd. 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as...もっと表示する 2-Mercaptobenzothiazole MBT(M) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either a light yellow powder or granule and can achieve good cold vulcanization when used together with a secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 表示を減らす
2-Mercaptobenzothiazole (Refined) Hainan Zhongxin Chemical Co., Ltd. 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelera...もっと表示する 2-Mercaptobenzothiazole MBT(M) (Refined) is a fast and nonpolluting accelerator suitable for rubbers and latex. It's available as either as a light yellow powder or granule and can achieve good cold vulcanization when used together with secondary accelerator such as TMTD, TETD or DPG. It can impart anti-aging properties to vulcanized rubbers and is mainly used in the manufacturing of tires, adhesive tapes, rubber overshoes and other rubber products. 2-Mercaptobenzothiazole is a refined version of 2-Mercaptobenzothiazole with a slightly higher initial M.P. count of 172.0 minimum oC. 表示を減らす
Request Sample 200W™ Univar Solutions 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grout...もっと表示する 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grouts, ceramics, and coatings. 表示を減らす
205 U.S. Zinc 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...もっと表示する 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 表示を減らす
205H U.S. Zinc 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...もっと表示する 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 表示を減らす
205HSA U.S. Zinc 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...もっと表示する 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). 表示を減らす
205L U.S. Zinc 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...もっと表示する 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 表示を減らす
205XL U.S. Zinc 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....もっと表示する 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. 表示を減らす
21% COBALT HYDROXY TEN-CEM Borchers, A Company of OMG 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, ...もっと表示する 21% COBALT HYDROXY TEN-CEM is a sacrificial drier in paste form. lt is used for drier stabilization in solvent-containing paint systems which dry by oxidation. This product takes effect in a controlled manner in step with the decomposition of the drier, but does not affect initial drying of the paint system and has no adverse effect on the film properties of the paint. 表示を減らす
210 U.S. Zinc 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...もっと表示する 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 表示を減らす
210E U.S. Zinc 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...もっと表示する 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 表示を減らす
210H U.S. Zinc 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...もっと表示する 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 表示を減らす
210HSA U.S. Zinc 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...もっと表示する 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. 表示を減らす
210L U.S. Zinc 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...もっと表示する 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. 表示を減らす
2–Hydroxy-4-n-octoxy-benzophenone (UV-531) Hainan Zhongxin Chemical Co., Ltd. 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, pol...もっと表示する 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, polypropylene fiber, ethylene-vinyl acetate etc. 表示を減らす
3# Water-Based Sealing Coating Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. 3# Water-Based Sealing Coating is a transparent coating. It is used as a coating for its transparency, and adhesion. It is commonly used in various kinds of primer and does not change the properties of the primer.
3,6,9–TRIOXADECANOIC ACID AMRI Global 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting...もっと表示する 3,6,9–TRIOXADECANOIC ACID (TODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. 表示を減らす
3,6,9–TRIOXAUNDECANEDIOIC ACID AMRI Global 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low me...もっと表示する 3,6,9–TRIOXAUNDECANEDIOIC ACID (TUDS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. 表示を減らす
3,6–DIOXAOCTANEDIOIC ACID AMRI Global 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low meltin...もっと表示する 3,6–DIOXAOCTANEDIOIC ACID (DOODS) is a uniquely structured high-tech Oxa acid. It can be used in pharmaceutical, cosmetic, high-tech, and chemical applications. The most remarkable characteristics of Oxa acids are very broad liquid range due to low melting and high boiling points, unique combination of lipophilic and hydrophilic functions, water-soluble, biologically degradable, excellent heat stability, and outstanding complexing properties. The unique combination of lipophilic and hydrophilic functions makes these waterclear substances “multi combatants” with many strengths in various chemical and physical applications. 表示を減らす
Request Sample 3-Glycidoxypropylmethyldiethoxysilane Dalian Onichem Co., Ltd. 3-Glycidoxypropylmethyldiethoxysilane is a coupling and crosslinking agent for waterborne systems. 3-Glycidoxypropylmethyldiethoxysilane is used in acrylic SBR and polyurethane adhesives.
Request Sample 3-Glycidoxypropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Glycidoxypropyltriethoxysilane is an adhesion promoter in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings.
3-Iodo-2-propynyl butylcarbamate (IPBC) Iofina Plc - formerly H&S Chemical Company, Inc. 3-Iodo-2-propynyl butylcarbamate (IPBC) is an additive in a white, crystalline powder form. It is a broad based biocide used globally as a preservative, fungicide, and algaecide. This product is most commonly used as a preservative in paint and coating ap...もっと表示する 3-Iodo-2-propynyl butylcarbamate (IPBC) is an additive in a white, crystalline powder form. It is a broad based biocide used globally as a preservative, fungicide, and algaecide. This product is most commonly used as a preservative in paint and coating applications. 表示を減らす
Request Sample 3-Isocyanatopropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Isocyanatopropyltriethoxysilane is a bonding additive and used for polymer endcapping.
Request Sample 3-Isocyanatopropyltrimethoxysilane Dalian Onichem Co., Ltd. 3-Isocyanatopropyltrimethoxysilane is a crosslinking agent used in silylated polyurethanes.
Request Sample 3-Mercaptopropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Mercaptopropyltriethoxysilane is a coupling agent for sulfur, cured rubber, and polyurethanes.
Request Sample 3-Mercaptopropyltrimethoxysilane Dalian Onichem Co., Ltd. 3-Mercaptopropyltrimethoxysilane is a coupling agent for sulfur, cured rubber and polyurethanes.
Request Sample 3-Thiocyanatopropyltriethoxysilane Dalian Onichem Co., Ltd. 3-Thiocyanatopropyltriethoxysilane is a coupling agent for mechanical rubber goods, and shoe soles.
Request Sample 3-Ureidopropyltriethoxysilane (50% in Methanol) Dalian Onichem Co., Ltd. 3-Ureidopropyltriethoxysilane (50% in Methanol) is a colorless to light brown liquid which boils at 64.5°C. It is an ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass.
Request Sample 3-Ureidopropyltrimethoxysilane Dalian Onichem Co., Ltd. 3-Ureidopropyltrimethoxysilane is a bonding additive suited for contaminated surfaces.
3D-1 Shanghai HuZheng Nano Technology Co., Ltd. 3D-1 is a conductive, transparent, colorless to light yellow liquid polymer used to provide anti-static properties by increasing the conductivity of solvent-based paints and coatings. It provides an electrical resistance of up to 100,000,000 Ω / cm witho...もっと表示する 3D-1 is a conductive, transparent, colorless to light yellow liquid polymer used to provide anti-static properties by increasing the conductivity of solvent-based paints and coatings. It provides an electrical resistance of up to 100,000,000 Ω / cm without significant change of other properties such as color, UV resistance and transparency. 表示を減らす
3M™ Fluorosurfactant FC-4430 3M Advanced Materials Division 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...もっと表示する 3M™ Fluorosurfactant FC-4430 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4430 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product can provide stain and dirt pick up resistance. 表示を減らす
3M™ Fluorosurfactant FC-4432 3M Advanced Materials Division 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...もっと表示する 3M™ Fluorosurfactant FC-4432 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4432 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. 表示を減らす
3M™ Fluorosurfactant FC-4434 3M Advanced Materials Division 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liqui...もっと表示する 3M™ Fluorosurfactant FC-4434 drastically lowers surface tension and helps coatings overcome problems caused by surface contamination. 3M fluorosurfactants concentrate at the liquid surface, lowering the surface tension of the liquid. This allows the liquid to wet and spread more evenly, and reduces the possibility of surface defects like orange peel. 3M fluorosurfactant FC-4434 also helps paints and coatings overcome surface contamination. The lower surface tension is the property that helps overcome surface contamination to help reduce or eliminate coating defects. Additionally, this product is ideal for providing stain and dirt pick up resistance. 表示を減らす
3M™ Stain Resistant Additive SRC-220 3M Advanced Materials Division 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product...もっと表示する 3M™ Stain Resistant Additive and Sealer SRC-220 is an aqueous-based fluorinated polyurethane dispersion (PUD) which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRC-220 offers durability, long-lasting performance and UV resistance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRC-220 is easy to incorporate into existing water and some solvent-based products and can be added to existing formulations or diluted with water or water miscible solvents and used as a stand-alone sealer. 表示を減らす
3M™ Stain Resistant Additive and Sealer SRA-250 3M Advanced Materials Division 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product pe...もっと表示する 3M™ Stain Resistant Additive and Sealer SRA-250 is an aqueous-based fluorinated acrylic polymer dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-250 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-250 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. 表示を減らす
3M™ Stain Resistant Additive and Sealer SRA-270 3M Advanced Materials Division 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The ...もっと表示する 3M™ Stain Resistant Additive and Sealer SRA-270 is an aqueous-based fluorinated acrylic modified urethane dispersion which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-270 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-270 is easy to incorporate into existing water-based products and can be added to existing formulations or diluted with water and used as a stand-alone sealer. 表示を減らす
3M™ Stain Resistant Additive and Sealer SRA-450 3M Advanced Materials Division 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the...もっと表示する 3M™ Stain Resistant Additive and Sealer SRA-450 is a solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-450 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-450 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. 表示を減らす
3M™ Stain Resistant Additive and Sealer SRA-451 3M Advanced Materials Division 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates th...もっと表示する 3M™ Stain Resistant Additive and Sealer SRA-451 is an solvent-based fluorinated acrylic polymer which provides stain repellency and stain release characteristics for porous hard surfaces such as concrete, natural stone and grout. The product penetrates the substrate pores resulting in a low surface energy that makes it easier for fluids and stains to be removed. Additionally, 3M stain resistant additive and sealer SRA-451 offers durability and long-lasting performance. The substrate’s natural characteristics (color, breathability) are generally unaffected by the application of this product. 3M stain resistant additive and sealer SRA-451 is easy to incorporate into existing solvent-based products and can be added to existing formulations or diluted with solvent and used as a stand-alone sealer. It can also be used as an additive for solvent-based or 100% silicone-based sealers to boost oil repellency. 表示を減らす
4,4'-dithiodimorpholine Hainan Zhongxin Chemical Co., Ltd. 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in t...もっと表示する 4,4'-dithiodimorpholine, synonymous with DTDM and Vulcanizing Agent DTDM, is a sulphur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure systems. It is a white crystline powder or granule that is primarily used in the production of synthetic rubbers and adhesives. 表示を減らす
4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) North Wanxing Chemical Co., Ltd. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,...もっと表示する 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) has a boiling point of 188-189°C, gas chromatography content of 98% minimum, and a melting point of 16-18°C. 表示を減らす
Request Sample 40-200™ Univar Solutions 40-200™ is a dry ground marble with a coarse particle size controlled between 40 and 200 mesh screens. It is widely used in applications with high loading levels such as cement finishes, textured coatings, and abrasives.
4892-SD-50 Epoxy Ester Gabriel Performance Products 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...もっと表示する 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. 表示を減らす
4A Molecular Sieve BELIKE Chemical Co.,Ltd. 4A Molecular Sieve is a dark grey powder. This product is most commonly used as a desiccant in lacquer and paint applications.
801-A Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 801-A Organic Bentonite Rheologic Additives is a kind of organic bentonite high-efficient thixotropic gelatin which is applicable to the solvent system with low and medium polarity. The product is of high adhesiveness and thus is especially suitable to be...もっと表示する 801-A Organic Bentonite Rheologic Additives is a kind of organic bentonite high-efficient thixotropic gelatin which is applicable to the solvent system with low and medium polarity. The product is of high adhesiveness and thus is especially suitable to be used for producing the high-viscosity paint. 801-A Organic Bentonite Rheologic Additives is used for epoxy resin bitumen varnishes and special industrial thick sludge coatings. 表示を減らす
801-B Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 801-B is a kind of organic bentonite high-efficient thixotropic gelatin; which is applicable to the low, medium and high-polarity solvent system of the aliphatic, alkyl halides, vegetable oil, aromatic hydrocarbon, or the mixture solvent with the aromatic...もっと表示する 801-B is a kind of organic bentonite high-efficient thixotropic gelatin; which is applicable to the low, medium and high-polarity solvent system of the aliphatic, alkyl halides, vegetable oil, aromatic hydrocarbon, or the mixture solvent with the aromatic hydrocarbon and the vinegar, ketone, ester, aether, and alcohol. This model of the product is equivalent to Bentone34, Claytone 40. 表示を減らす
801-C Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 801-C Organic Bentonite Rheologic Additives is widely used in wood primer and ink. It has better dispersion and thickening capacity than traditional organic clay.
801-D Easily Dispersible Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 801-D Easily Dispersible Organic Bentonite Rheologic Additives is a kind of organic Bentonite that can be easily dispersed and self-activated. It can be easily dispersed in solvent or resin and the dispersion can reach below 20μm under medium shearing and...もっと表示する 801-D Easily Dispersible Organic Bentonite Rheologic Additives is a kind of organic Bentonite that can be easily dispersed and self-activated. It can be easily dispersed in solvent or resin and the dispersion can reach below 20μm under medium shearing and in a short time. This product can also be dispersed easily in solvent. Its surface viscosity is low, however, the gelatin efficiency is extremely high in resin systems. The viscosity reinforcement, anti-flowing & dropping and anti-depositing performances are good. 801-D is suitable for low-medium-high polarity solvent systems, for example, aromatic hydrocarbon series and oxygen-gorne solvent. It is used in chlorinated rubber, cyclic oxygen, polyester, glycolic acid, crylic acid, nitryl and unsaturated resin systems. The product is applied for industrial coating, anti-corrosion lacquer, auto lacquer, wood-ware lacquer, printing ink and sealing gel. 表示を減らす
801-D2 Self-Dispersing Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 801-D2 Self-Dispersing Organic Bentonite Rheologic Additives is a kind of self-dispersing organic Bentonite which can be dispersed without need of any polarity activator and the high-shear conditions. It is applicable to the medium to high polarity solven...もっと表示する 801-D2 Self-Dispersing Organic Bentonite Rheologic Additives is a kind of self-dispersing organic Bentonite which can be dispersed without need of any polarity activator and the high-shear conditions. It is applicable to the medium to high polarity solvent system of the ketone, ester, glycol, aether and aether-ester, alcohol, etc. Its superior suspension capability will greatly simplify the recipe and the producing procedure. It may revise the technical process after simplification and substitute the gas phase silicon dioxide, through which the cost will be effectively reduced. This model of product is equivalent to Bentone SD-2. 801-D2 Self-Dispersing Organic Bentonite Rheologic Additives has applications in industrial top paint, auto lacquer, and nano organic composite materials. 表示を減らす
806 Organic Bentonite Rheological Additive Zhejiang Qinghong New Material Co., Ltd. 806 Organic Bentonite Rheological Additive additive is a kind of improved high-purity organic ammonium montmorillonite organoclay. This product has a finer dispersing grain diameter, less than 30μm if dispersed completely. It is applicable in low-medium p...もっと表示する 806 Organic Bentonite Rheological Additive additive is a kind of improved high-purity organic ammonium montmorillonite organoclay. This product has a finer dispersing grain diameter, less than 30μm if dispersed completely. It is applicable in low-medium polar solvent aliphatic and aromatic systems, such as mineral oil, paraffin oil, mechanical oil, toluene, xylene, and 200# solvent oil systems. 806 Organic Bentonite Rheological Additive, as a kind of high-quality, high-efficiency thickening, anti-sinkable, anti-sagging and thixotropy additive, is widely used in industrial paint, printing oil, furniture paint, grease, and antiseptic paint. 表示を減らす
808 Dispersible Organic Bentonite Rheological Additive Zhejiang Qinghong New Material Co., Ltd. 808 Dispersible Organic Bentonite Rheological Additive is a kind of newly developed high-purity dispersible self-activated organic ammonium montmorillonite organoclay based on 801-D. It has a finer grain diameter, less than 30μm if dispersed completely. I...もっと表示する 808 Dispersible Organic Bentonite Rheological Additive is a kind of newly developed high-purity dispersible self-activated organic ammonium montmorillonite organoclay based on 801-D. It has a finer grain diameter, less than 30μm if dispersed completely. It is the rheological additive of paint, printing oil for the low-medium and some part of high polar solvent system of aliphatic hydrocarbon, esters, and ketone. This product can be dispersed self-activatedly without an activator in the medium-high polar solvent systems like xylene, xylene-esters (such as butyl acetate), and xylene-ketone (such as cyclohexanone). 808 Dispersible Organic Bentonite Rheological Additive is a kind of dispersible broad-spectrum rheological additive, which can be used in antiseptic paint, printing oil, boat paint, industrial decorative paint, car primer coat and sealing materials. 表示を減らす
881-A Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 881-A Organic Bentonite Rheologic Additives is a kind of organic Bentonite varied with quaternary ammonium salt which is specifically used as oil well drilling sludge and oil-based pipe-freeing agent. It is used in the diesel-based oil water emulsificatio...もっと表示する 881-A Organic Bentonite Rheologic Additives is a kind of organic Bentonite varied with quaternary ammonium salt which is specifically used as oil well drilling sludge and oil-based pipe-freeing agent. It is used in the diesel-based oil water emulsification system. 881-A features suspension performance, contacting variation and good stability. This product is equivalent to VG69 and VERSA. 881-A Organic Bentonite Rheologic Additives is an oil-based sludge and pipe-free agent for petroleum well drilling, solvent paint and coatings. 表示を減らす
881-B Economical Type Organic Bentonite Rheologic Additives Zhejiang Qinghong New Material Co., Ltd. 881-B Economical Type Organic Bentonite Rheologic Additives are a kind of traditional organic modified montmorillonite Bentonite varied with organic amine, which is suitable for acryclic and aromatic hydrocarbon solvent systems with low and medium polarit...もっと表示する 881-B Economical Type Organic Bentonite Rheologic Additives are a kind of traditional organic modified montmorillonite Bentonite varied with organic amine, which is suitable for acryclic and aromatic hydrocarbon solvent systems with low and medium polarity, for example, mineral oil, olefin oil, toluene, xylene and 200# solvent oil systems. 881-B Economical Type Organic Bentonite Rheologic Additives has applications as a blending lacquer, floor lacquer, foundry coating, grease coatings, and powder coatings. 表示を減らす
9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide Hainan Zhongxin Chemical Co., Ltd. 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for syn...もっと表示する 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) is a white granule powder that is 99% pure. It is primarily used as an antibacterial agent, antioxidant, discoloration preventive and fireproofing agent. DOPO can also be used as a reactant for synthesis of monomer and water-thinned ink compositions. 表示を減らす
901-GDA-2 PCI Group, Inc. 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide,...もっと表示する 901-GDA-2 is a clear, silicone-free polyvinyl isobutyl ether solution used to improve color development, leveling and gloss while controlling surface flooding and floating. It can be used with acrylic resin, alkyd (long, medium and short oils), polyamide, polyester and urethane for pigmented and non-pigmented systems. 表示を減らす
941 LBA PCI Group, Inc. 941 LBA is a clear, linear polydimethylsiloxane polymer designed for use in systems containing non-leafing aluminums. It provides higher brightness, controlled uniformity and burnishing and helps prevent “black” float.
99.99% Conductive Shining Flake Silver Powder Beijing Entrepreneur Science &Trading Co., Ltd. 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, ...もっと表示する 99.99% Conductive Shining Flake Silver Powders are different silver powder products are chosen according to different use conditions. Low apparent density flake silver powders is the main raw material in production of conductive coating, membrane switch, conductive inks, conductive rubber, conductive plastic, conductive ceramics.Low apparent density flake silver powder is mainly used in the low temperature electronic paste, conductive inks, conductive coatings, electromagnetic shielding coatings. the coating configurated by flake silver powder, whose liquidity and resistance to settlement is good, the coating area is large. 表示を減らす
99.99% Conductive Silver Powder (Spherical) Beijing Entrepreneur Science &Trading Co., Ltd. 99.99% Conductive Silver Powder (Spherical) are widely used in electronic pastes, electronic products, electrical conductivity, electromagnetic shielding, anti-bacterial, and anti-virus applications.
A-6 Polyamine Epoxy Chemicals, Inc. A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adh...もっと表示する A-6 Polyamine is a straw colored amine curing agent compatible with most aliphatic and cycloaliphatic amine curing agents.This product is intended for use with liquid epoxy resins at room temperature, has virtually no odor, high strength, and has damp adhesion properties. It finds application in construction adhesives, hardened concrete adhesives, injection resin, and ASTM 881 resin systems. 表示を減らす
A-6165 Designer Molecules A-6165 is a dark brown viscous liquid, additive with a conductive adhesive formulation. This is most commonly used as an additive in combination with metal fillers to further decrease volume resistivity in electrically conductive adhesive applications.
A-675-100% Designer Molecules A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...もっと表示する A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. 表示を減らす
Request Sample A-C® 1660 Univar Solutions A-C® 1660 is high melt temperature, hard polypropylene (PP) homopolymer for use in solvent borne coatings and hot melt adhesives to improve surface properties (drag) and heat resistance.
Request Sample A-C® 1702 Univar Solutions A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by...もっと表示する A-C® 1702 is grease like, low temperature, completely amorphous, low density polyethylene (PE) homopolymer for use in solvent borne coatings; heat set, sheet fed solvent borne inks; and specialty digital and UV/EB inks to provide mar and rub resistance by lowering the coefficient of friction. 表示を減らす
Request Sample A-C® 1754 Univar Solutions A-C® 1754 is a polypropylene homopolymer.
Request Sample A-C® 316A Univar Solutions A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion re...もっと表示する A-C® 316A is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. 表示を減らす
Request Sample A-C® 325 Univar Solutions A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...もっと表示する A-C® 325 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. 表示を減らす
Request Sample A-C® 330 Univar Solutions A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...もっと表示する A-C® 330 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. 表示を減らす
Request Sample A-C® 392 Univar Solutions A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion res...もっと表示する A-C® 392 is hard, high drop point, high density, oxidized polyethylene (HDOxPEs) homopolymer powder (granule) for use in water borne coatings and inks, overprint varnishes, polishes and textiles to improve surface properties including mar and abrasion resistance by lowering the coefficient of friction. 表示を減らす
Request Sample A-C® 3A Univar Solutions A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the sur...もっと表示する A-C® 3A is low density polyethylene (LDPE) homopolymer powder for use in solvent borne coatings and heat set, sheet fed and liquid inks to improve surface properties. It accomplishes this by lowering the coefficient of friction (improving slip) of the surface and therefore improving mar and abrasion resistance. . 表示を減らす
Request Sample A-C® 400 Univar Solutions A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing appli...もっと表示する A-C® 400 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 13%, used extensively in hot melt adhesives (HMAs) to control rheology and boost adhesion. It can be added as a diluent but provides the dual function of reducing application viscosity at melt, while providing an adhesion boost versus homopolymer, non functional diluents (FT, byproduct, thermally degraded (TD) and PE homopolymer waxes). It is completely miscible in EVA adhesive resins, as would be expected by the similar chemistry. It is also used in candles to provide paraffin crystal nucleation, which increases thermal and breakage resistance, adhesion to glass, and fragrance retention. 表示を減らす
Request Sample A-C® 405M Univar Solutions A-C® 405M is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 8%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
Request Sample A-C® 405T Univar Solutions A-C® 405T is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 6%, for use in solvent borne coatings to control rheology and provide metallic flake orientation. Used extensively in automotive basecoats.
Request Sample A-C® 415 Univar Solutions A-C® 415 is ethylene vinyl acetate (EVA) copolymer in prill form, with a VA content of 15%, developed specifically to be used as an adhesive flooding compound between the cable bundle and extruded outer jacket in the manufacturing of cables. .
Request Sample A-C® 5120 Univar Solutions A-C® 5120 is ethylene acrylic acid copolymer in a prill form, with an acrylic acid content of 15%, promotes adhesion to various substrates, and rheology control for solventborne coatings.
Request Sample A-C® 540 Univar Solutions A-C® 540 is ethylene acrylic acid (EAA) copolymer in a prill form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.
Request Sample A-C® 540A Univar Solutions A-C® 540A is ethylene acrylic acid (EAA) copolymer in a powder form, with an acrylic acid content of 5%, improves adhesion, provides rheology control and provides metallic flake orientation.