UL Prospector
Prospector

成功しました

検索の保存に成功しました
139 結果
1201 Slurry® Imerys Performance Additives 1201 Slurry® is a pre-dispersed, delaminated kaolin produced from a water-fractionated feed with a carefully controlled particle size and platy shape. The plate-like structure provides barrier properties in many applications, such as good enamel holdout, ...もっと表示する 1201 Slurry® is a pre-dispersed, delaminated kaolin produced from a water-fractionated feed with a carefully controlled particle size and platy shape. The plate-like structure provides barrier properties in many applications, such as good enamel holdout, stain resistance, and washability in interior emulsion paint systems. 表示を減らす
ACRONAL® 4250 BASF Dispersions & Resins Acronal® 4250 is a premium elastomeric recommended for use in zinc-oxide free formulations, has excellent adhesion to various substrates, and is code compliant.
Adhesion Reinforcing Primer/B3325 Tianjin Boyuan New Materials Co., Ltd. B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material.
AF-066 FTC Korea Co.,Ltd AF-066 is an excellent leveling agent and is highly effective at defoaming. It has good balance between effectiveness and compatibility. It is suitable for use in general industrial coating, wood and furniture coatings, printing inks, and architectural co...もっと表示する AF-066 is an excellent leveling agent and is highly effective at defoaming. It has good balance between effectiveness and compatibility. It is suitable for use in general industrial coating, wood and furniture coatings, printing inks, and architectural coatings. 表示を減らす Request Sample
AF-550 FTC Korea Co.,Ltd AF-550 is an excellent defoaming and leveling agent. It has good gloss and gloss retention with excellent visual clarity. It is suitable for use in PCM coating, flooring coatings, and general industrial coatings. Request Sample
AF-900 FTC Korea Co.,Ltd AF-900 is an excellent defoaming and leveling agent. It has good gloss and gloss retention. It is suitable for use in PCM coating, flooring coating, and general industrial coating. Request Sample
AGOCEL® AC 1147 CHT USA (formerly ICM) AGOCEL® AC 1147 is a rheology additive for architectural latex-based paints. It is an off-white powder. Request Sample
AGOCEL® AC 3900 CHT USA (formerly ICM) AGOCEL® AC 3900 is a thickener and retention agent for mineral building material systems. It is a beige, fine powder. Request Sample
ANCAMIDE® 400 Curing Agent Evonik Operations GmbH, BL Crosslinkers ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...もっと表示する ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. 表示を減らす Request Sample
Anti-static Primer/B3320K Tianjin Boyuan New Materials Co., Ltd. B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation.
BGP-BL119 DKSH BGP-BL119 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a compl...もっと表示する BGP-BL119 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a complete palette of fluorescent colors, and broad compatibility. 表示を減らす Request Sample
BGP-GR118 DKSH BGP-GR118 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a compl...もっと表示する BGP-GR118 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a complete palette of fluorescent colors, and broad compatibility. 表示を減らす Request Sample
BGP-OG115 DKSH BGP-OG115 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a compl...もっと表示する BGP-OG115 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a complete palette of fluorescent colors, and broad compatibility. 表示を減らす Request Sample
BGP-OY116 DKSH BGP-OY116 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a compl...もっと表示する BGP-OY116 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a complete palette of fluorescent colors, and broad compatibility. 表示を減らす Request Sample
BGP-PK111 DKSH BGP-PK111 is a tinctorially strong general-purpose fluorescent pigment for use in low polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a compl...もっと表示する BGP-PK111 is a tinctorially strong general-purpose fluorescent pigment for use in low polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a complete palette of fluorescent colors, and broad compatibility. 表示を減らす Request Sample
BGP-RD113 DKSH BGP-RD113 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a compl...もっと表示する BGP-RD113 is a tinctorially strong general-purpose fluorescent pigment for use in low-polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a complete palette of fluorescent colors, and broad compatibility. 表示を減らす Request Sample
BGP-YE117 DKSH BGP-YE117 is a tinctorially strong general-purpose fluorescent pigment for use in low polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a compl...もっと表示する BGP-YE117 is a tinctorially strong general-purpose fluorescent pigment for use in low polarity systems including paper coatings, paints, screen inks, plastisols, and gravure Type "A" inks. Product features and benefits include high color strength, a complete palette of fluorescent colors, and broad compatibility. 表示を減らす Request Sample
BIB2-BL801 DKSH BIB2-BL801 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-BL801 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-CH227 DKSH BIB2-CH227 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-CH227 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-CL201 DKSH BIB2-CL201 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-CL201 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-GR202 DKSH BIB2-GR202 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-GR202 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-MG207 DKSH BIB2-MG207 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-MG207 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-OG204 DKSH BIB2-OG204 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-OG204 is a tinctorially strong fluorescent ink base for use in sheet fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-PK1975 DKSH BIB2-PK1975 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oi...もっと表示する BIB2-PK1975 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-PK206 DKSH BIB2-PK206 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-PK206 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-RD205 DKSH BIB2-RD205 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-RD205 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-YE203 DKSH BIB2-YE203 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oil...もっと表示する BIB2-YE203 is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BIB2-YE203R DKSH BIB2-YE203R is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oi...もっと表示する BIB2-YE203R is a tinctorially strong fluorescent ink base for use in sheet-fed, headset, and UV lithographic ink systems that print in one pass at the equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses. It offers high color strength, a complete palette of colors, and broad compatibility. 表示を減らす Request Sample
BYK-1641 BYK BYK-1641 is a VOC- and mineral oil-free defoamer for aqueous systems that is very easy to incorporate and has an excellent price-performance ratio. Request Sample
BYK-1745 BYK BYK-1745 is a VOC- and silicone-free defoamer based on polymers and renewable as well as sustainable raw materials for aqueous adhesives and aqueous architectural coatings. Request Sample
BYK-3568 BYK BYK-3568 is a surface-active additive to improve leveling and increase the surface energy of solvent-borne, 100 %, and UV systems, with a medium reduction in surface tension and a medium increase in surface slip. Request Sample
DAPRO® AP 7010S Elementis DAPRO® AP 7010S is a liquid defoamer, economical in use for universal waterborne applications. The product shows very good long-term efficiency. Request Sample
Docure KH-252 Kukdo Chemical Co., Ltd. Docure KH-252 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-252 shows good physical properties and chemical resistance. It is well suited for use as an accelerator for amine and the production of cure...もっと表示する Docure KH-252 is a polyamine modified curing agent which can cure rapidly with epoxy resin at room temperature. KH-252 shows good physical properties and chemical resistance. It is well suited for use as an accelerator for amine and the production of cured epoxies and floorings. 表示を減らす
Docure KH-811 Kukdo Chemical Co., Ltd. Docure KH-811 is a clear medium viscosity hardener for high solid and solvent-free coatings. Particularly, it is suitable for application of two-component spray systems. Also, KH-811 has excellent properties even at low temperature. It is well suited for...もっと表示する Docure KH-811 is a clear medium viscosity hardener for high solid and solvent-free coatings. Particularly, it is suitable for application of two-component spray systems. Also, KH-811 has excellent properties even at low temperature. It is well suited for use in the production of solvent free coatings and floorings with a high gloss sheen. 表示を減らす
Docure KH-812 Kukdo Chemical Co., Ltd. Docure KH-812 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-812 has low viscosity and solvent free. KH-812 has excellent coloring performance, good flexibility and high gloss. It is well suited for use in the production of ...もっと表示する Docure KH-812 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-812 has low viscosity and solvent free. KH-812 has excellent coloring performance, good flexibility and high gloss. It is well suited for use in the production of solvent free coatings and floorings. 表示を減らす
Docure KH-813 Kukdo Chemical Co., Ltd. Docure KH-813 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-813 has low viscosity and solvent free. It can be used for solvent free coating systems and floorings.
Docure KH-814 Kukdo Chemical Co., Ltd. Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulati...もっと表示する Docure KH-814 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-814 has low viscosity and solvent free. It can be used for mortar, floor repair and commercial and industrial floorings. It is well suited for the use in formulating products such as solvent free coatings. 表示を減らす
Docure KH-816 Kukdo Chemical Co., Ltd. Docure KH-816 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-816 gives high gloss films that are resistant to various chemicals. These properties make it ideal for formulating floorings and tank linings.
Docure KH-818B Kukdo Chemical Co., Ltd. Docure KH-818B is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-818B gives high gloss films that are resistant to various chemicals. It can be used for solvent free coating systems and floorings.
Docure KH-825 Kukdo Chemical Co., Ltd. Docure KH-825 is a cycloaliphatic Amine modified curing agent for use with epoxy resins. KH-825 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of floorings and other ...もっと表示する Docure KH-825 is a cycloaliphatic Amine modified curing agent for use with epoxy resins. KH-825 has low viscosity and solvent free. It can be used for Injection systems and resin mortars. It is well suited for use in the production of floorings and other coatings. 表示を減らす
Docure KH-831 Kukdo Chemical Co., Ltd. Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with goo...もっと表示する Docure KH-831 is a cycloaliphatic amine modified curing agent for use with epoxy resins. KH-831 has high gloss and good weathering resistance after curing. It is well suited for use in the production of floorings, industrial coatings and coatings with good weathering resistance. 表示を減らす
Docure TH-431 Kukdo Chemical Co., Ltd. Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...もっと表示する Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 表示を減らす
Docure TH-432 Kukdo Chemical Co., Ltd. Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...もっと表示する Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. 表示を減らす
Docure TH-438 Kukdo Chemical Co., Ltd. Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...もっと表示する Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. 表示を減らす
Docure TH-451 Kukdo Chemical Co., Ltd. Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings.
Docure TH-452 Kukdo Chemical Co., Ltd. Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings.
DOWSIL™ 107F Additive Dow Performance Silicones DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...もっと表示する DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. 表示を減らす
DOWSIL™ 8590 Additive Dow Performance Silicones DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...もっと表示する DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. 表示を減らす
Epokukdo BGE Kukdo Chemical Co., Ltd. Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, ...もっと表示する Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, etc. 表示を減らす
EPS® 2786 EPS Materials EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss t...もっと表示する EPS® 2786 is a self-crosslinking all-acrylic film-forming polymer that is an exceptional choice for high-performance gloss interior and exterior architectural DIY or professional paints. EPS® 2786 is a versatile polymer recommended for use in semi-gloss to high gloss enamels that require exceptional hardness and tack resistance in both white/pastel bases and fully tinted clear/neutral bases. Ideal for institutional, commercial, or other high-traffic areas. EPS® 2786 is formulated without the use of intentionally added fluorosurfactants. 表示を減らす Request Sample
FAP-100 FTC Korea Co.,Ltd FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industr...もっと表示する FAP-100 is an adhesion promoter for solvent borne systems. It has excellent adhesion properties when used with steel and plastic substrates. It works to improve corrosion protection and flexibility. It is suitable for use in can and coil coatings, industrial coatings, and silk screen inks. 表示を減らす Request Sample
Flexisperse™ 133N Innovative Chemical Technologies, Inc. Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product h...もっと表示する Flexisperse™ 133N, in the form of a water white to pale amber opaque liquid, is an aqueous, sodium neutralized, hydrophobically-modified pigment dispersant copolymer. It can be used in flat through gloss latex interior and exterior paints. This product has a boiling point of 100 degrees Celsius and a pH of 7.0 +/- 1.0. It is designed for pigment dispersion in water-based coatings. 表示を減らす Request Sample
Flexisperse™ 134NH Innovative Chemical Technologies, Inc. Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has ...もっと表示する Flexisperse™ 134NH, in the form of an off-white to pale amber opaque liquid, is an aqueous, ammonium neutralized, hydrophobically-modified pigment dispersant copolymer that can be used in latex interior and exterior paints and coatings. This product has a pH of 9.0 +/- 0.5 and a boiling point of 100 degrees Celsius. It is designed for pigment dispersion in water-based coatings. 表示を減らす Request Sample
Glomax® JDF Imerys Performance Additives Glomax®JDF is a is a fine particle dehydroxylated kaolin with a very closely controlled particle size distribution. Glomax® JDF is designed for oleoresinous and primer paint systems where fast grinding and high hiding are required
Glomax™ LL Imerys Performance Additives Glomax™ LL is a medium particle size calcined kaolin with a good balance of optical and sheen control. It has a wide range of PVC levels in architectural coatings.
Glomax®XF Imerys Performance Additives Glomax®XF is a calcined aluminum silicate. It has an ultrafine particle size and disperses easily in both aqueous and non-aqueous systems. The unique particle structure imparts high modulus, tensile strength, tear and abrasion properties in elastomers. Im...もっと表示する Glomax®XF is a calcined aluminum silicate. It has an ultrafine particle size and disperses easily in both aqueous and non-aqueous systems. The unique particle structure imparts high modulus, tensile strength, tear and abrasion properties in elastomers. Improved processing performance may allow higher filler loading in the aqueous and non-aqueous systems leading to cost and processibility optimization. 表示を減らす
Graph'Up W3 CARBON WATERS Graph'Up W3 is a ready-to-use additive boosting anti-corrosion, UV resistance, anti-scratch, and anti-clogging performance of waterbased formulations.
HCCFlex SP-390 Hanwha Chemical Corporation HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...もっと表示する HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. 表示を減らす
Hydrite® 121-S Imerys Performance Additives Hydrite® 121-S is a medium particle size pre-dispersed kaolin pigment that offers a water-fractioned controlled particle size distribution at a low cost. Hydrite® 121-S is supplied as a lightly pulverized powder or as a slurry at 70% solids.
Hydrite® Flat D Imerys Performance Additives Hydrite® Flat D is a controlled coarse particle size hydrous kaolin with a low binder demand suitable for solvent and water based coating and adhesive applications.
Hydrite® Flat DS Imerys Performance Additives Hydrite® Flat DS is a controlled coarse particle size hydrous kaolin with a low binder demand suitable for water based coating and adhesive applications.
Hydrite™ KCS Imerys Performance Additives Hydrite™ KCS is a versatile high brightness, fine particle size hydrous kaolin.
Hydrite® PXNLCS Imerys Performance Additives Hydrite® PXNLCS is a low conductivity hydrous kaolin providing edge protection in water based industrial coating applications. Recommended applications including general industrial primers & topcoats, coil and electrodeposition coatings.
Hydrite® R Imerys Performance Additives Hydrite® R is a fine particle size, pH neutral hydrous kaolin with a medium binder demand suitable for solvent and water based coatings.
Hydrite® RS Imerys Performance Additives Hydrite® RS is a fine particle size, pH neutral hydrous kaolin with a medium binder demand suitable for water based coatings and adhesive applications.
Hydrite® RS-A Imerys Performance Additives Hydrite®RS-A is a fine particle size, acidic pH Hydrous kaolin with a medium binder demand suitable for water based coatings, inks, polymer & rubber applications.
Hydrite™ SB 60 Imerys Performance Additives Hydrite™ SB 60 is an fine stain resistance additive specifically designed to provide optimum barrier performance in solvent & water based coating applications.
Hydrite™ SB 60S Imerys Performance Additives Hydrite™ SB 60S is an ultra fine stain resistance additive specifically designed to provide optimum performance in water based barrier coating applications.
Hydrite® TS 90 Imerys Performance Additives Hydrite® TS 90 is the most efficient pigment spacer that has been designed to limit the impact on gloss reduction when used in high & semi gloss solvent & water based coatings.
Hydrite® TS 90S Imerys Performance Additives Hydrite® TS 90S is the most efficient pigment spacer that has been designed to limit the impact on gloss reduction when used in high & semi gloss water based coatings.
Hydrite® UF 90 Imerys Performance Additives Hydrite® UF 90 is a pigment spacer that has been designed to extend prime pigments in gloss though eggshell solvent & water based coatings.
Hydrite® UF 90S Imerys Performance Additives Hydrite® UF 90S is a pigment spacer that has been designed to extend prime pigments in gloss though eggshell water based coatings.
Kaopaque® 10 Imerys Performance Additives Kaopaque®10 is a platy hydrous kaolin designed to good enamel holdout and washability in solvent and water based coating applications.
Kaopaque® 10S Imerys Performance Additives Kaopaque®10S is a delaminated platy hydrous kaolin produced designed to good enamel holdout and washability in suitable for water based coating applications.
MetaStar® 501 Imerys Performance Additives Metastar® 501 is a premium metakaolin produced by very carefully controlled calcination. It has been engineered with a high level of pozzolanic reactivity when used in portland cement-based concrete, plaster, and mortar. Unlike other pozzolanic materials ...もっと表示する Metastar® 501 is a premium metakaolin produced by very carefully controlled calcination. It has been engineered with a high level of pozzolanic reactivity when used in portland cement-based concrete, plaster, and mortar. Unlike other pozzolanic materials such as silica fume, fly ash, and blast-furnace slag, MetaStar® 501 metakaolin will not darken white or gray cement-based applications. The use of this engineered metakaolin in mortar, cement, and plaster can increase chemical resistance, compressive and flexural strengths and can reduce permeability. In addition, MetaStar® 501 metakaolin can aid in reducing alkali silica reactions. 表示を減らす
MetaStar™ 501HP Imerys Performance Additives MetaStar™ 501HP is our newest High Performance Metakaolin for the construction industry, produced under very specialized calcination conditions. It is an engineered metakaolin with a high level of pozzolanic reactivity. MetaStar™ 501HP reacts with calcium...もっと表示する MetaStar™ 501HP is our newest High Performance Metakaolin for the construction industry, produced under very specialized calcination conditions. It is an engineered metakaolin with a high level of pozzolanic reactivity. MetaStar™ 501HP reacts with calcium hydroxide formed in the cement during hydration which can result in improved strength, workability and durability. The use of this engineered metakaolin in Portland cement based concrete, mortar, and plaster can refine the pore structure, densify the interfacial zone and increase resistance against corrosion, acid and chemical attacks. 表示を減らす
Michem® Dispersion 91530 Michelman Michem® Dispersion 91530 is an acrylic resin dispersion. This additive is best used as a leveling aid, gloss enhancer and for buffability and mar resistance for the floor finish industry. It is also effective for gloss enhancement for auto polish formulas...もっと表示する Michem® Dispersion 91530 is an acrylic resin dispersion. This additive is best used as a leveling aid, gloss enhancer and for buffability and mar resistance for the floor finish industry. It is also effective for gloss enhancement for auto polish formulas. 表示を減らす
Microspersion® 400SM-40 Micro Powders, Inc. Microspersion® 400SM-40 is a nonionic water based dispersion of spherical submicron PTFE.
NeoGen® 1000 Imerys Performance Additives NeoGen® 1000 is a structured aluminium silicate that has been designed for use as an extender pigment in paint systems.
NeoGen® 2000 Imerys Performance Additives NeoGen®2000 is a highly structured alumimium silicate that has been engineered to develop maximum TiO extension over a wide range of PVC levels in architectural coatings.
OpTiMax® 0425 Imerys Performance Additives OpTiMax® 0425 is an engineered alumina silicate designed to provide maximum dry hiding and good scrub resistance in mid to high PVC, interior and exterior architectural coating applications.
ORGASOL® 1002 D NAT 1 Arkema ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...もっと表示する ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. 表示を減らす Request Sample
ORGASOL® 1002 ES5 NAT 1 Arkema ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...もっと表示する ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. 表示を減らす Request Sample
ORGASOL® 2001 EXD NAT 1 Arkema ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...もっと表示する ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. 表示を減らす Request Sample
ORGASOL® 2001 UD NAT 1 Arkema ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...もっと表示する ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. 表示を減らす Request Sample
ORGASOL® 2002 D NAT 1 Arkema ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...もっと表示する ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. 表示を減らす Request Sample
ORGASOL® 2002 ES3 NAT 3 Arkema ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...もっと表示する ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. 表示を減らす Request Sample
ORGASOL® 2002 ES4 NAT 3 Arkema ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...もっと表示する ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. 表示を減らす Request Sample
ORGASOL® 2002 ES5 NAT 3 Arkema ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...もっと表示する ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. 表示を減らす Request Sample
ORGASOL® 2002 ES6 NAT 3 Arkema ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...もっと表示する ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. 表示を減らす Request Sample
Polarite 402A Imerys Performance Additives Polarite 402A is a Fine Calcined clay surface treated with amino based silane to provide improved adhesion, dimensional stability and enhanced mechanical properties for the plastics, elastomers and coatings markets.
Polarite 502A Imerys Performance Additives Polarite 502A is a calcined kaolin coated with an aminosilane coupling agent; the silane develops chemical bonds between filler and polymer during many crosslinking reactions to impart good dimensional stability and mechanical strength. Calcined kaolins ...もっと表示する Polarite 502A is a calcined kaolin coated with an aminosilane coupling agent; the silane develops chemical bonds between filler and polymer during many crosslinking reactions to impart good dimensional stability and mechanical strength. Calcined kaolins are produced from highly refined kaolins by heating at temperatures above 1000°C. During calcination, chemical, morphological and mineralogical changes occur. 表示を減らす
Polarite 902A Imerys Performance Additives Polarite 902A is a surface treated hydrous kaolin for use with polyamides to impart good dimensional stability, rigidity and impact strength. Can also be used in coatings applications for improved barrier and anti-corrosive properties
Polarite 903A Imerys Performance Additives Polarite 903A is a hydrous kaolin for use with elastomeric compounds to impart better processing performance, improved mechanical properties and barrier characteristics due to the unique structure and particle shape.
Polarite 905A Imerys Performance Additives Polarite 905A is a surface treated hydrous kaolin for PBT, PEEK, Acrylics, Epoxy and Urethane based applications. Can also be used in coatings applications for improved barrier and anti-corrosive properties.
PoleStar® 400 Slurry Imerys Performance Additives PoleStar® 400 Slurry is a structured aluminium silicate produced by a controlled, high temperature dehydroxylation of a precisely fractioned, ultra-fine particle kaolin.
Polytac-500 Atmos Technologies Polytac R-500 is a thermoplastic polyolefin of value in adhesives, sealants, and roofing compounds. It has excellent compatibility with petroleum hydrocarbon resins, rosin, polybutenes, petroleum waxes, and many polymers and fillers.
QUICK-TRIGGER® 4333 BASF Dispersions & Resins Quick-Trigger® 4333 can be used to achieve early rain resistance when combined with BASF's Acronal resins in roof coating formulations.
RHEOBYK-100 BYK RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings an...もっと表示する RHEOBYK-100 is a powdered rheology additive for non-polar to medium-polarity solvent-borne systems. It is suitable for many systems based on aliphatic through to aromatic solvents. It can therefore be used in protective coatings, architectural coatings and general industrial coatings. RHEOBYK-100 is also particularly suitable for use in thick-layered epoxy and vinyl resin systems. 表示を減らす Request Sample
RHEOLATE® 150S Elementis RHEOLATE® 150S rheological additive is a cost effective and versatile alkali swellable thickener in an easy to use emulsion form designed to provide excellent low shear viscosity build. It is very cost effective in medium to high PVC formulations. RHEOLA...もっと表示する RHEOLATE® 150S rheological additive is a cost effective and versatile alkali swellable thickener in an easy to use emulsion form designed to provide excellent low shear viscosity build. It is very cost effective in medium to high PVC formulations. RHEOLATE® 150S can be used alone or in combination with other rheological modifiers, e.g. HEC or PU thickeners to achieve the desired rheological performance. It imparts good sag and spatter resistance along with improved leveling and syneresis control and good color acceptance. 表示を減らす Request Sample