| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...もっと表示する Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. 表示を減らす | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...もっと表示する Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. 表示を減らす | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...もっと表示する Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. 表示を減らす | Request Sample |
| DISPERBYK®-174 | BYK | DISPERBYK®-174 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is especially sui...もっと表示する DISPERBYK®-174 is a high molecular weight wetting and dispersing additive for solvent-borne systems and pigment concentrates. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This product is especially suitable for producing pigment concentrates. In addition to stabilizing pigments, DISPERBYK®-174 reduces millbase viscosity, thus enabling the formulator to produce highly filled pigment concentrates without difficulty 表示を減らす | Request Sample |
| DISPERBYK®-180 | BYK | DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings ...もっと表示する DISPERBYK®-180 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is an alkylolammonium salt of a copolymer with acidic groups. This product is used in aqueous, solvent-borne and solvent-free coatings to deflocculate and stabilize preferably inorganic pigments (especially titanium dioxide). DISPERBYK®-180 is solvent-free, reduces millbase viscosity and therefore is suitable for “low-VOC“ and “VOC-free“ systems. 表示を減らす | Request Sample |
| DISPERBYK®-182 | BYK | DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area a...もっと表示する DISPERBYK®-182 is a high molecular weight wetting and dispersing additive for solvent-borne and water-borne systems. It is composed of solutions of high molecular weight block copolymers with pigment affinic groups. This displays a wide application area and is compatible with both solvent-borne and aqueous systems. DISPERBYK®-182 can be utilized - alone or in combination with DISPERBYK®-108 (see Data Sheet W217/PW3) - to produce solvent-borne pigment concentrates. 表示を減らす | Request Sample |
| Epokukdo 1,4BDGE | Kukdo Chemical Co., Ltd. | Epokukdo 1,4 BDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the...もっと表示する Epokukdo 1,4 BDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. 表示を減らす | |
| Epokukdo 1,6HDGE | Kukdo Chemical Co., Ltd. | Epokukdo 1,6 HDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the...もっと表示する Epokukdo 1,6 HDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. 表示を減らす | |
| Epokukdo BGE | Kukdo Chemical Co., Ltd. | Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, ...もっと表示する Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, etc. 表示を減らす | |
| PAT-ADD VR7001 | Patcham USA | PAT-ADD VR7001 is a medium-high volatile universally recommended aliphatic hydrocarbon viscosity depressant with acidic wetting and dispersing elements for PVC plastisols. It keeps the plastisol workable over long period of storage and significantly lower...もっと表示する PAT-ADD VR7001 is a medium-high volatile universally recommended aliphatic hydrocarbon viscosity depressant with acidic wetting and dispersing elements for PVC plastisols. It keeps the plastisol workable over long period of storage and significantly lowers the viscosity build up. 表示を減らす | Request Sample |
| PAT-ADD VR7005 | Patcham USA | PAT-ADD VR7005 is a universally recommended high volatile hydrocarbon-based viscosity depressant for PVC plastisols. It keeps the plastisol workable over long period of storage and significantly lowers the viscosity build up. | Request Sample |
| PAT-ADD VR7006N | Patcham USA | PAT-ADD VR7006N is a universally recommended medium volatile hydrocarbon-based viscosity depressant for PVC plastisols. It keeps the plastisol workable over long period of storage and markedly lowers the viscosity build up. | Request Sample |
| PAT-ADD VR7007 | Patcham USA | PAT-ADD VR7007 is APEO-free universally recommended medium volatile hydrocarbon-based viscosity depressant for PVC plastisols. It keeps the plastisol workable over long period of storage and markedly lowers the viscosity build up. | Request Sample |
| PAT-ADD VR7008 | Patcham USA | PAT-ADD VR7008 is a combination of a viscosity depressant and wetting agent, which will reduce the viscosity of PVC plastisol in the low shear range. It keeps the plastisol workable over long period of storage and markedly lowers the viscosity build up. | Request Sample |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...もっと表示する Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. 表示を減らす | |
| Viscoat #200 | Kowa American Corporation | Viscoat #200 (cyclic trimethylopropane formal acrylate or CTFA) is a non-yellowing monofunctional reactive thinner that provides high toughness, adhesion, low shrinkage, weatherability, chemical resistance and flexibility. It is useful in flexible UV and ...もっと表示する Viscoat #200 (cyclic trimethylopropane formal acrylate or CTFA) is a non-yellowing monofunctional reactive thinner that provides high toughness, adhesion, low shrinkage, weatherability, chemical resistance and flexibility. It is useful in flexible UV and EB Cure Coatings, which are applied to flexible substrates and the electronics industry (photopolymers and stereolithography). 表示を減らす | Request Sample |
| VISCOBYK®-4041 | BYK | VISCOBYK®-4041 is a viscosity depressant for PVC plastisols. It is an aliphatic hydrocarbons with neutral wetting and dispersing components. This product is a colorless liquid. It can be added during the production of the plastisol or shortly before proce...もっと表示する VISCOBYK®-4041 is a viscosity depressant for PVC plastisols. It is an aliphatic hydrocarbons with neutral wetting and dispersing components. This product is a colorless liquid. It can be added during the production of the plastisol or shortly before processing. 表示を減らす | Request Sample |
