| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...もっと表示する 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. 表示を減らす | |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4778-X-50 Phenolic/rosin Modified Alkyd Resin | Gabriel Performance Products | 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...もっと表示する 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. 表示を減らす | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...もっと表示する 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. 表示を減らす | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...もっと表示する 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. 表示を減らす | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...もっと表示する 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. 表示を減らす | |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...もっと表示する Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. 表示を減らす | |
| ACRONAL® 4160 | BASF Dispersions & Resins | Acronal® 4160 is an aqueous styrene-acrylic copolymer dispersion for creating versatile waterproofing membranes that resist standing water, withstand negative-side hydrostatic pressure, and prevent water intrusion. Formulations using Acronal® 4160 will pr...もっと表示する Acronal® 4160 is an aqueous styrene-acrylic copolymer dispersion for creating versatile waterproofing membranes that resist standing water, withstand negative-side hydrostatic pressure, and prevent water intrusion. Formulations using Acronal® 4160 will provide exceptional waterproofing performance for interior and exterior coating applications. 表示を減らす | |
| ACRONAL® 4420 X | BASF Dispersions & Resins | Acronal® 4420 is an acrylic binder for use in air barriers, waterproofing and cellulosic tapes, and asphalt. It offers superior moisture vapor permeability with low water uptake. This product is non-APEO. | |
| ACRONAL® NX 4787 | BASF Dispersions & Resins | Acronal® 4787 is an all purpose styrene acrylic used in adhesives, primers and coatings. It provides high strength, adhesion and water/alkali resistance. This product has low viscosity and is non-APEO. | |
| ACRONAL® S 400 NA | BASF Dispersions & Resins | Acronal S 400 NA is an acrylic dispersion offering excellent crack bridging performance for flexible cementitious roof coatings. | |
| Adhesion Promoter SZ 9166 | Soltech Ltd | Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is...もっと表示する Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is 100% polymer solid by weight with a viscosity of 1,800-3,600 at 25℃. 表示を減らす | |
| Adhesion Promoter SZ 9167 | Soltech Ltd | Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesio...もっと表示する Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9167 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 25℃. 表示を減らす | |
| AFCONA - 1501 | AFCONA Additives Sdn Bhd | AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems ...もっと表示する AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems and baking paints. AFCONA - 1501 functions as a universal dispersing resin tailor-made for the production of aqueous-based universal pigment concentrates, finding application in water-based coatings. 表示を減らす | |
| AFCONA - 1503 | AFCONA Additives Sdn Bhd | AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of ...もっと表示する AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. 表示を減らす | |
| Agrol® 2.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol® 3.0 AO | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol® 3.6 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol® 4.0 | BioBased Technologies | Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...もっと表示する Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). 表示を減らす | |
| Agrol Diamond® | BioBased Technologies | Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...もっと表示する Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. 表示を減らす | |
| Agrol Platinum™ | BioBased Technologies | Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...もっと表示する Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. 表示を減らす | |
| Agrol Prime™ A-110 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...もっと表示する Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. 表示を減らす | |
| Agrol Prime™ A-56 | BioBased Technologies | Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...もっと表示する Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. 表示を減らす | |
| Alcohol Soluble Maleic Resin SL A130-6 | SWISLOYD LIMITED | Alcohol Soluble Maleic Resin SL A130-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and pri...もっと表示する Alcohol Soluble Maleic Resin SL A130-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| Alcohol Soluble Maleic Resin SL A145-10 | SWISLOYD LIMITED | Alcohol Soluble Maleic Resin SL A145-10 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 145±5°C. It is often used in surface coatings and pr...もっと表示する Alcohol Soluble Maleic Resin SL A145-10 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 145±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| Allyl Pentaerythritol | Perstorp | Allyl Pentaerythritol (APE) is mainly used as a crosslinker in various acrylic polymers used as thickeners. | |
| Alpha-Rez™ 9200 E | Lawter | Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear condi...もっと表示する Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear conditions. It also has a high critical toning index which is crucial for waterless offset inks. Alpha-Rez™ 9200 E is suitable for use in web offset, coldset and heatset applications as well as in letterpress and sheet-fed systems. 表示を減らす | |
| Amino Modified Polysiloxane R-8104 | Zhejiang Feidian Chemical Co., Ltd. | R-8104 is an amino modified polysiloxane. It maintains good amino reaction activity and coupling effect, and it provides better storage activity and low volatility. This product is widely used in modified plastics and coating applications. | |
| Aqualac AYD-127 | Aquent Impex | Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). 表示を減らす | |
| Aqualac AYD-128 | Aquent Impex | Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...もっと表示する Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). 表示を減らす | |
| Aqualac AYD-801 | Aquent Impex | Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-801 has and epoxy equivalent of 450~500 (g/eq) and softening point of 65~75 (℃). 表示を減らす | |
| Aqualac AYD-802 | Aquent Impex | Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-802 has and epoxy equivalent of 600~700 (g/eq) and softening point of 81~89 (℃). 表示を減らす | |
| Aqualac AYD-803 | Aquent Impex | Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-803 has and epoxy equivalent of 700~900 (g/eq) and softening point of 90~96 (℃). 表示を減らす | |
| Aqualac AYD-803U | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 表示を減らす | |
| Aqualac AYD-804 | Aquent Impex | Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...もっと表示する Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). 表示を減らす | |
| Aqualac AYDPG- 660 | Aquent Impex | Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq). | |
| Aqualac AYDPG- 669 | Aquent Impex | Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq). | |
| Aqualac AYDPG-300 | Aquent Impex | Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq). | |
| AR-515 | Chan Sieh Enterprises Co, Ltd. | AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics. | |
| AR-531 | Chan Sieh Enterprises Co, Ltd. | AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...もっと表示する AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. 表示を減らす | |
| Aromatic C9 Hydrocarbon Resin Aquatac I100 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...もっと表示する Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I100 has an Gardner colour value of 3-4. 表示を減らす | |
| Aromatic C9 Hydrocarbon Resin Aquatac I120S | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polyme...もっと表示する Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I120S has an Gardner colour value of 4-5. 表示を減らす | |
| Aromatic C9 Hydrocarbon Resin Aquatac I140 | Aquent Impex | Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...もっと表示する Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I140 has an Gardner colour value of 5-6. 表示を減らす | |
| Aromatic Soluble Maleic Resin SL E120-6 | SWISLOYD LIMITED | Aromatic Soluble Maleic Resin SL E120-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 120±5°C. It is often used in surface coatings and pr...もっと表示する Aromatic Soluble Maleic Resin SL E120-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 120±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| Aromatic Soluble Maleic Resin SL E130-5 | SWISLOYD LIMITED | Aromatic Soluble Maleic Resin SL E130-5 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and pr...もっと表示する Aromatic Soluble Maleic Resin SL E130-5 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, 表示を減らす | |
| B-3000 | Chan Sieh Enterprises Co, Ltd. | B-3000 is an acrylic resin in the form of a brown liquid. This product offers good water solubility. It can be used as a binder for baking paint applications. | |
| BarrierPro® 4545 | Mallard Creek Polymers, Inc. | BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applica...もっと表示する BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applications. Because of its high strength film, it makes an excellent product for blending with other BarrierPro® products to strengthen waterproof membranes, specialty paints, and sealants. 表示を減らす | |
| BarrierPro® 4550 | Mallard Creek Polymers, Inc. | BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications su...もっと表示する BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as damp proof membranes, specialty paints and sealants. 表示を減らす | |
| BarrierPro® 4551 | Mallard Creek Polymers, Inc. | BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excell...もっと表示する BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro® 4551 is also a good base polymer for blending with other BarrierPro® products to allow a membrane to be custom tailored to a specific strength and/or flexibility need. 表示を減らす | |
| BarrierPro® 4555 | Mallard Creek Polymers, Inc. | BarrierPro® 4555 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for damp proofing where films must remain flexible at below freezing temperatures. | |
| BECKOSOL® 12035-E1 | Polynt Composites | BECKOSOL® 12035-E1 is a short-oil coconut alkyd resin in a VOC-exempt solvent. This product has low color and color retention. It can be used as a plasticizer for nitrocellulose lacquers, as a vehicle for conversion varnishes, and in low-HAP and VOC bakin...もっと表示する BECKOSOL® 12035-E1 is a short-oil coconut alkyd resin in a VOC-exempt solvent. This product has low color and color retention. It can be used as a plasticizer for nitrocellulose lacquers, as a vehicle for conversion varnishes, and in low-HAP and VOC baking enamels. 表示を減らす | |
| BECKOSOL® 90-095 | Polynt Composites | BECKOSOL® 90-095 is a non-oxidizing short coconut oil alkyd resin. This product offers good color and color retention, high gloss, and does not yellow enamels. It can be used in high-temperature baking enamels and as a plasticizer for clear or light-color...もっと表示する BECKOSOL® 90-095 is a non-oxidizing short coconut oil alkyd resin. This product offers good color and color retention, high gloss, and does not yellow enamels. It can be used in high-temperature baking enamels and as a plasticizer for clear or light-colored lacquers. 表示を減らす | |
| BENASOL AS 452 | Benasedo | BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| Benasol HS 754 | Benasedo | Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| BENCRYL PU 137 | Benasedo | BENCRYL PU 137 is a linear aliphatic urethane acrylated oligomer endowed with very good flexibility, good hardnes and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| Benester 27 | Benasedo | Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications. | |
| Benester 742 | Benasedo | Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance. | |
| Benester 839 | Benasedo | Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industria...もっと表示する Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primers and enamels, especially for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. 表示を減らす | |
| Bluepur 2937 | S.A.P.I.C.I. SpA | Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K ...もっと表示する Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K waterborne systems. 表示を減らす | |
| BUTANOL® NS 104 | BASF Dispersions & Resins | Butanol® NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibi...もっと表示する Butanol® NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibility at low temperatures. It is non-APEO and non-ammonia. 表示を減らす | |
| BUTANOL® NS 198 | BASF Dispersions & Resins | Butanol® NS 198 is a cationic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It improves strength, ductility and flexibility. This product is non-APEO and non-ammonia. | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...もっと表示する Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. 表示を減らす | |
| BUTOFAN® NS 299 | BASF Dispersions & Resins | Butofan® NS 299 is an aqueous aqueous non-carboxylated butadiene-styrene copolymer dispersion for use in flooring adhesives and asphalt modification. | |
| BYD-1002A | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1002A, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne refinishing paints, wooden paints, and rubber paints. This product is non-flammable and resistant to scratching. It...もっと表示する BYD-1002A, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne refinishing paints, wooden paints, and rubber paints. This product is non-flammable and resistant to scratching. It is pollution-free. 表示を減らす | |
| BYD-1014 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no afte...もっと表示する BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no after-tack with this product under high temperature conditions. 表示を減らす | |
| BYD-1348 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil...もっと表示する BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. 表示を減らす | |
| BYD3510 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...もっと表示する BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 表示を減らす | |
| BYD3520 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| BYD3928 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...もっと表示する BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. 表示を減らす | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...もっと表示する BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. 表示を減らす | |
| C9 Resin | Yangzhou Sunchem Co., Ltd. | C9 Resin is a light yellow granular synthetic resin that has a pH value of 6-8 and an acid value of 0.5 mgKOH/g maximum. This product is used as a raw material for adhesives, sealants, coatings, and printing inks. | |
| C9-10 | SWISLOYD LIMITED | C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...もっと表示する C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 表示を減らす | |
| C9-12 | SWISLOYD LIMITED | C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...もっと表示する C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 表示を減らす | |
| C9-7 | SWISLOYD LIMITED | C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...もっと表示する C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 表示を減らす | |
| C9-8 | SWISLOYD LIMITED | C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...もっと表示する C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. 表示を減らす | |
| Cariflex™ IR0307 KU Polymer | Univar Solutions | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...もっと表示する Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...もっと表示する Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 表示を減らす | |
| Cariflex™ IR0310 KU Polymer | Univar Solutions | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...もっと表示する Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...もっと表示する Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 表示を減らす | |
| Cariflex™ IR0401 BU Latex | Univar Solutions | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...もっと表示する Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...もっと表示する Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 表示を減らす | |
| Cariflex™ IR0401 SU Latex | Univar Solutions | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...もっと表示する Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 表示を減らす | Request Sample |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...もっと表示する Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 表示を減らす | |
| CHS-Alkyd AL 2900 | Spolchemie | CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...もっと表示する CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. 表示を減らす | |
| CHS-Alkyd AL 3961 | Spolchemie | CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...もっと表示する CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. 表示を減らす | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...もっと表示する CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. 表示を減らす | |
| CHS-Alkyd AL 7310 | Spolchemie | CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for ...もっと表示する CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for printing inks as a binder for offset, heatset and metal decorating inks. CHS-Alkyd AL 7150 has good color retention, water resistance and pigment wetting. 表示を減らす | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...もっと表示する CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. 表示を減らす | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...もっと表示する CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. 表示を減らす | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...もっと表示する CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. 表示を減らす | |
| CHS-Alkyd SU 621 N 50 | Spolchemie | CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...もっと表示する CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 表示を減らす | |
| CHS-Alkyd SU 632 N 60 | Spolchemie | CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...もっと表示する CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. 表示を減らす | |
| CHS-Alkyd SU 671 W 60 | Spolchemie | CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is ...もっと表示する CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is primarily used for fast air-drying coatings for interior and exterior applications. 表示を減らす | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...もっと表示する CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. 表示を減らす |
