| ADDITOL® XL 6507 | Allnex | ADDITOL® XL 6507 is a deairator/defoamer for solvent born paint systems. | Request Sample |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...もっと表示する Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). 表示を減らす | Request Sample |
| Borchi® Gol 0011 | Borchers, A Company of OMG | Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid ...もっと表示する Borchi® Gol 0011 is a liquid flow promoter and deaerator for solvent-containing and solvent-free epoxy resin and polyurethane coatings. It is used to improve the flow and surface properties of coatings based on solvent-containing and solvent-free, liquid epoxy and polyurethane resins. This product acts as a flow promoter in such systems, destroying bubbles appearing during application and preventing crater formation. Borchi® Gol 0011 can be used in all conventional solvent-containing and solvent-free, liquid 2-component epoxy resin and polyurethane systems.. 表示を減らす | |
| Borchi® Gol E2 | Borchers, A Company of OMG | Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-fre...もっと表示する Borchi® Gol E2 is a paint additive for the improvement of flow properties and deaeration of air-drying, stove-drying and catalysed paints. Blistering during preparation and surface defects caused by application are eliminated. This product is silicone-free and can be used in all solvent-containing and solvent-free, single- and multi-component paints. Factors affecting the efficacy of the surface-active substances, besides the type of binder used, are application and mixing conditions. 表示を減らす | |
| Bubreak® 453 | Buckman Laboratories, Inc. | Bubreak® 453 is a concentrated product used as a foam-control agent for water-thinned paints and coatings, an air-release agent for polyester-resin spray and gel-coating operations, and a deaerator in gluing operations. Bubreak® 453 is allowed for use by ...もっと表示する Bubreak® 453 is a concentrated product used as a foam-control agent for water-thinned paints and coatings, an air-release agent for polyester-resin spray and gel-coating operations, and a deaerator in gluing operations. Bubreak® 453 is allowed for use by the U.S. Food and Drug Administration under Title 21 of the Code of Federal Regulations, § 175.105 (Adhesives), 175.300 (Resinous and polymeric coatings), and 176.200 (Defoaming agents used in coatings). 表示を減らす | |
| BYK®-035 | BYK | BYK®-035 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially suitable for emulsion systems with a PVC of 20-40. Its effectiveness is not impaired by high shear forces. | Request Sample |
| BYK®-037 | BYK | BYK®-037 is an emulsion of paraffin based mineral oils and hydrophobic components, containing silicone. It is used in all emulsion paints and plasters as well as for defoaming during the dispersion production. BYK-037 is very cost-efficient. | Request Sample |
| BYK®-038 | BYK | BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances ex...もっと表示する BYK®-038 is a mixture of paraffin based mineral oils and hydrophobic components, containing silicone. This product is especially designed for universal use in APEO-free emulsions. It contains a small amount of a paint compatible silicone which enhances excellent efficiency. BYK-038 should be preferably used in emulsion systems with a PVC from 20 to 70. 表示を減らす | Request Sample |
| CERAFLOUR® 993 | BYK | CERAFLOUR® 993 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of micronized amide wax. This product is used in solvent-borne systems and powder coatings. | Request Sample |
| CERAFLOUR® 994 | BYK | CERAFLOUR® 994 is a micronized wax for improving surface properties of solvent-borne paint systems and powder coatings. It is composed of ultra fine micronized amide wax. This product is used in solvent-borne systems and powder coatings. | Request Sample |
| CERAFLOUR® 994 For Powder | BYK | CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane...もっと表示する CERAFLOUR® 994 For Powder is an additive to improve the charge transfer efficiency of powder coatings. It is composed of ultra fine micronized amide wax. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. 表示を減らす | Request Sample |
| CV2-1148 | NuSil Silicone Technology 1 | CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for...もっと表示する CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for applications that require minimal volatile condensables under extreme operating conditions. 表示を減らす | |
| EFKA® PB 2744 | BASF Formulation Additives | EFKA® PB 2744 is an ultra low VOC de-aerator providing excellent efficiency as well as long-term persistency and effectiveness against macro and micro-foam. Recommended for clear and pigmented resin systems, and compatible in high solids 2K polyurethane, ...もっと表示する EFKA® PB 2744 is an ultra low VOC de-aerator providing excellent efficiency as well as long-term persistency and effectiveness against macro and micro-foam. Recommended for clear and pigmented resin systems, and compatible in high solids 2K polyurethane, 2K epoxy and UV coatings. Especially suitable for high solids industrial flooring. 表示を減らす | |
| EFKA® SI 2722 | BASF Formulation Additives | EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in ...もっと表示する EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy systems and solvent-free polyurethane systems. 表示を減らす | |
| EFKA® SI 2723 | BASF Formulation Additives | EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth...もっと表示する EFKA® SI 2723 has been developed to produce rapid de-aeration of solvent-free polyurethane and epoxy compounds used in flooring application, so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. On the other hand, it presents the advantage of low odor. EFKA® SI 2723 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy and polyurethane systems, low odor, high-solids two-pack systems and solvent-free radiation-curable systems. 表示を減らす | |
| EFKA® SL 3236 | BASF Formulation Additives | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...もっと表示する EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. 表示を減らす | |
| FLOWLEN AC-1190HF | GSI Exim America, Inc. | FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. Thi...もっと表示する FLOWLEN AC-1190HF is a modified butadiene polymer in paraffin hydrocarbon with excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-2000HF | GSI Exim America, Inc. | FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. ...もっと表示する FLOWLEN AC-2000HF is a modified butadiene polymer in paraffin hydrocarbon showing excellent deaerating and performance in urethane floor coating systems plus anti-solvent popping performance in thermo-setting coating systems. It doesn’t include any HAPS. This product is a colorless to yellowish liquid. 表示を減らす | |
| FLOWLEN AC-326F | GSI Exim America, Inc. | FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping i...もっと表示する FLOWLEN AC-326F is a defoaming and deaerating agent for non-aqueous paints. It shows excellent deaerating effect even if high film thickness or coating on a porous substrate. FLOWLEN AC-326F also shows excellent performance in preventing solvent-popping in thermo-setting systems. This product is a pale yellow liquid. 表示を減らす | |
| FLOWLEN AC-530 | GSI Exim America, Inc. | FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applic...もっと表示する FLOWLEN AC-530 is a defoaming and deaerating agent for solvent-based coatings. It is composed of a foam destroying polymer in mineral spirits. This product is a pale yellow liquid. It is used in air-drying, thermo-setting, wood coating and flooring applications. 表示を減らす | |
| FLOWLEN No. 90 | GSI Exim America, Inc. | FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-s...もっと表示する FLOWLEN No. 90 is a levelling and deaerating agent for non-aqueous coatings. It is especially recommended for pre-coat-metal coatings. This acrylic copolymer is a transparent liquid. It can also be used in solvent-based coatings, powder coatings and non-solvent coatings. 表示を減らす | |
| FOAMSTAR® SI 2292 NC | BASF Formulation Additives | FOAMSTAR® SI 2292 NC is a defoamer and deaerating agent for use in purely aqueous coatings and those coatings containing co solvents based on polymer emulsions and applied by curtain coating, spraying, dipping, rolling or brushing on wood, wood products o...もっと表示する FOAMSTAR® SI 2292 NC is a defoamer and deaerating agent for use in purely aqueous coatings and those coatings containing co solvents based on polymer emulsions and applied by curtain coating, spraying, dipping, rolling or brushing on wood, wood products or metal. Due to its long-term defoaming effect FOAMSTAR® SI 2292 NC has proved to be suitable in emulsion and suspension polymerization, particularly in the manufacture of PVC, vinyl acetate and acrylic emulsions. FOAMSTAR® SI 2292 NC may be used during polymerization and monomer stripping. 表示を減らす | |
| Siltech® C-32 | Siltech Corp. | Siltech® C-32 is an alkyl aryl functional silicone fluid. It imparts leveling, de-aeration, mar resistance and pigment treatment without affecting the coatability or adhesion of the treated surface. Siltech® C-32 additive is used as an additive in solvent...もっと表示する Siltech® C-32 is an alkyl aryl functional silicone fluid. It imparts leveling, de-aeration, mar resistance and pigment treatment without affecting the coatability or adhesion of the treated surface. Siltech® C-32 additive is used as an additive in solvent, solvent-less and powder systems. It provides such benefits as leveling, de-aeration, mar resistance and pigment treatment. 表示を減らす | |
| SURFYNOL® 118 | Evonik Operations GmbH, BL Coating Additives | SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any fi...もっと表示する SURFYNOL® 118 is a very compatible, formulated molecular defoamer/deaerator based on Gemini surfactant technology. It can be used for a wide variety of applications where pinhole elimination, macro-, and micro-foam control is needed without causing any film defects. 表示を減らす | Request Sample |
| Surfynol® MD 20 | Evonik Operations GmbH, BL Coating Additives | Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating ...もっと表示する Surfynol® MD 20 is a multifunctional defoamer it provides a combination of foam control and dynamic wetting, with the potential to reduce overall additive levels, while minimizing surface defects. Surfynol® MD 20 is exceptionally effective at eliminating microfoam and other foam related defects in waterborne systems when used as a foam control agent. It is 100% active, solvent-free, clear liquid. It is free of silicone and hydrophobic silica. It is temperature and pH stable (pH 1-13). Applications include, coatings, graphic arts, adhesives, dye and pigment synthesis, pigment grinding, oil and gas processing, cleaning products, metalworking fluids, cements, mortars and grouts and personal care. 表示を減らす | Request Sample |
| TEGO® Airex 900 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particu...もっと表示する TEGO® Airex 900 is an organo-modified polysiloxane, containing fumed silica. This product is an excellent defoamer and deaerator for solvent-based, solvent-free and radiation curing coating systems. It is a liquid and has outstanding performance particularly in higher viscosity formulations. TEGO® Airex 900 is recommended to use for self-leveling floor coatings and to be applied by brush, roller, or airless spraying. 表示を減らす | Request Sample |
| TEGO® Airex 901 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901...もっと表示する TEGO® Airex 901 W is a polyether siloxane copolymer, containing fumed silica. This product is an excellent defoamer and deaerator concentrate. It has excellent effectiveness against micro- and macro-foam in airless and airmix applications. TEGO® Airex 901 W is used particularly for waterborne and high viscosity formulations. It is also recommended for flexo and gravure printing, and to be applied by brush, roller, or airless spraying. 表示を減らす | Request Sample |
| TEGO® Airex 901 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 901 W N is a highly effective deaerator concentrate based on polyether siloxane technology. Outstandingly effective against micro-foam in a variety of applications. | Request Sample |
| TEGO® Airex 902 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air s...もっと表示する TEGO® Airex 902 W is a highly compatible deaerator emulsion of a polyether siloxane copolymer, containing fumed silica. This product is effective against micro- and macro-foam. TEGO® Airex 902 W is highly suitable for airless spraying and compressed air spraying applications as well as for brush and roller applications. It is also recommended for use in self-leveling floor coatings. 表示を減らす | Request Sample |
| TEGO® Airex 902 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 902 W N is a highly effective and compatible deaerator emulsion based on polyether siloxane technology. Outstandingly effective against micro- and macro-foam. | Request Sample |
| TEGO® Airex 904 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for ai...もっと表示する TEGO® Airex 904 W is a polyether siloxane copolymer, containing fumed silica. This product is an effective deaerator concentrate to eliminate micro-foam. TEGO® Airex 904 W has a good balance of compatibility and effectiveness. It is highly suitable for airless spraying applications. It is also suitable for compressed air spraying and brush/roller applications. Haziness, caused by low temperatures, is reversible and does not affect the performance properties of TEGO® Airex 904 W. 表示を減らす | Request Sample |
| TEGO® Airex 904 W N | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 904 W N is a very effective deaerator concentrate based on polyether siloxane technology. Very effective against micro-foam. Offers good compatibility. | Request Sample |
| TEGO® Airex 910 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coatin...もっと表示する TEGO® Airex 910 is a highly compatible defoamer and deaerator for both solvent-free and solvent-based coating systems. It can be post added and is ideally suited for use in clearcoats. TEGO® Airex 910 is suitable for airless spraying as well as dip coating, flow coating, and curtain coating. It is also suitable for self-leveling floor coating and brush and roller applications. 表示を減らす | Request Sample |
| TEGO® Airex 920 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable fo...もっと表示する TEGO® Airex 920 is a highly compatible deaerator concentrate for radiation-curing coating systems. It is a liquid organic polymer and silicone-free. This product has universal use in clear and pigmented formulations. TEGO® Airex 920 is highly suitable for flexo and gravure printing. It is also suitable for compressed air spraying, as well as for dip coating, flow coating, and curtain coating 表示を減らす | Request Sample |
| TEGO® Airex 921 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this pr...もっと表示する TEGO® Airex 921 is a liquid, silicone-free, organic polymer for universal use in clear, pigmented, and especially for radiation-curing formulations. It is also highly suitable for compressed air spraying and flexo/gravure printing. The addition of this product, may be either in the grind or during the let-down procedure. It may be used at temperatures above 15°C. 表示を減らす | Request Sample |
| TEGO® Airex 922 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is ...もっと表示する TEGO® Airex 922 is a highly compatible defoamer and deaerator concentrate for solventborne coatings. Supplied as a liquid, it's formulation is based on deaerating polymers and is very strong with solvent-free epoxy high-build coatings. TEGO® Airex 922 is highly suitable for self-leveling floor coatings. It is also suitable for brush/roller applications, as well as airless and compressed air spraying. 表示を減らす | Request Sample |
| TEGO® Airex 923 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 923 is a silicone-free deaerator concentrate that provides outstanding compatibility. Fast and efficient foam breakdown. | Request Sample |
| TEGO® Airex 931 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 931 is a 4-Heptanone, 2,6-dimethyl-solution of a fluoro-silicone. It is universally used in solventborne formulations. It is also highly effective against macro-foam but still compatible. TEGO® Airex 931 is highly suitable for self-leveling fl...もっと表示する TEGO® Airex 931 is a 4-Heptanone, 2,6-dimethyl-solution of a fluoro-silicone. It is universally used in solventborne formulations. It is also highly effective against macro-foam but still compatible. TEGO® Airex 931 is highly suitable for self-leveling floor coating and compressed air spraying. It is also suitable for flexo/gravure printing, airless spraying, and brush and roller applications. 表示を減らす | Request Sample |
| TEGO® Airex 940 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 940 shows good compatability combined with effectiveness against both micro- and macro-foam. Ideally suited for high-solid and 2K solvent-free formulations. | Request Sample |
| TEGO® Airex 944 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can b...もっと表示する TEGO® Airex 944 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 944 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. 表示を減らす | Request Sample |
| TEGO® Airex 960 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 ca...もっと表示する TEGO® Airex 960 is a deaerator for solvent-free and solvent-borne coating formulations based on deaerating organic polymers. It is used particularly for pigmented formulations. It is highly effective at preventing micro- and macro-foam. TEGO® Airex 960 can be applied for wood and furniture coatings and floor coatings based on 2-pack polyurethane formulations and based on amine/amide-curing epoxides. 表示を減らす | Request Sample |
| TEGO® Airex 978 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 978 is a very strong deaerator concentrate that provides excellent effectiveness against micro- and macro-foam in solvent-borne, radiation-curing, and high-solids coatings and inks. Very suitable for high build and high viscosity applications. | Request Sample |
| TEGO® Airex 990 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations a...もっと表示する TEGO® Airex 990 is a deaerator for solventborne coating formulations. It is used for industrial coatings, wood and furniture coatings, coatings for plastics, and leather top coats. TEGO® Airex 990 is highly suitable for high solids coatings formulations as well as for solventborne and solvent-free formulations. It helps prevent pinholes and popping, is highly compatible, has good recoatability, and is highly suitable for clears. It is also suitable for alkyd and UV systems. 表示を減らす | Request Sample |
| TEGO® Airex 991 | Evonik Operations GmbH, BL Coating Additives | TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 h...もっと表示する TEGO® Airex 991 deaerator for solvent-free and solventborne coating formulation based on deaerating organic polymers, with tip of silicone. It is recommended for industrial coatings and 2-pack coatings based on epoxies and polyurethanes. TEGO® Airex 991 has good recoatability, is highly effective, prevents micro- and macro-foam, and is used particularly for pigmented formulations. 表示を減らす | Request Sample |
| TEGO® Glide B 1484 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems wit...もっと表示する TEGO® Glide B 1484 is a glide and flow additive with deaeration properties. It is a clear liquid polyether siloxane copolymer that is both recoatable and thermostable. TEGO® Glide B 1484 has good flow promotion in solvent-free and solventborne systems with deaerating properties. It also has good orientation of matting agents. This product can be added to the coating as supplied or as a predilution. Predilution in a suitable solvent simplifies the dosage and incorporation of TEGO® Glide B 1484. 表示を減らす | Request Sample |
| TEGO® Guard 9000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Guard 9000 is an organically modified branched polysiloxane emulsion providing excellent quick-set properties. It is suitable for various decorative exterior paints. | Request Sample |
| TEGO® Rad 2500 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is ...もっと表示する TEGO® Rad 2500 is a radically crosslinkable glide, slip, and anti-blocking additive with good deaerating effects. It is a clear liquid silicone acrylate, radiation-curing defoaming additive which improves mechanical resistance and reduces friction. It is especially suitable for pigmented formulations. TEGO® Rad 2500 can be added to the coating as supplied or as a predilution either in the grind stage or during the let-down stage. Predilution in a suitable solvent simplifies dosage and incorporation of this product. 表示を減らす | Request Sample |
| TEGO® Wet 505 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO...もっと表示する TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulations, be during the grind stage. 表示を減らす | Request Sample |
| TEGO® Wet KL 245 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings...もっと表示する TEGO® Wet KL 245 is a highly active siloxane-based substrate-wetting additive. It shows very good substrate-wetting properties on difficult substrates like wood and plastic. It is highly compatible and recommended for waterborne and solvent-borne coatings. 表示を減らす | Request Sample |
| Venadol™ DF 110 L | Harcros Chemicals, Inc. | Venadol™ DF 110 L is a high performance, nonionic, molecular defoamer and deaerator. Venadol DF 110 L excels where effective defoaming or de-airentraining and foam elimination/prevention is necessary without causing surface defects. | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...もっと表示する WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. 表示を減らす | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...もっと表示する WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. 表示を減らす | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...もっと表示する WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. 表示を減らす | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...もっと表示する WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. 表示を減らす | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...もっと表示する WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). 表示を減らす | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...もっと表示する WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. 表示を減らす | |
| WorléeAdd 371 | Worlée-Chemie G.m.b.H. | WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coat...もっと表示する WorléeAdd 371 is a silicone based, highly effective antifoam and deairing additive for solvent based paints and inks of different compositions. W´Add 371 prevents foam and air bubbles at the production and application of solvent based and high solids coating systems and printing inks. It is especially recommended in thixotropic PUR systems. 表示を減らす | |
| WorléeAdd 373 N | Worlée-Chemie G.m.b.H. | WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperf...もっと表示する WorléeAdd 373 N is a silicone containing additive with multifunctional properties. It is used in solvent based coatings mainly to achieve surface smoothness and mar resistance. At the same time W´Add 373 N works as antifoam agent and avoids surface imperfections. This product appears as a clourless, low viscous liquid. 表示を減らす | |
| WorléeAdd 428 | Worlée-Chemie G.m.b.H. | WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coi...もっと表示する WorléeAdd 428 is a silicone free additive for the manufacture of structured coil coatings. The formation of the orange peel effect is achieved only by adding W´Add 428. No wax addition is necessary. The structure is achieved by adding W´Add 428 to the coil coating primer. Minimum film thickness should be 15 µ. 表示を減らす | |
| WorléeAdd 602 | Worlée-Chemie G.m.b.H. | WorléeAdd 602 is an antifoam agent and defoamer mainly for 2 compound PUR and epoxy resin coatings. W´Add 602 should be added to the binder during production before the addition of other additives. | |
| WorléeAdd 603 | Worlée-Chemie G.m.b.H. | WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition impr...もっと表示する WorléeAdd 603 is a polyacrylate modified silicone defoamer for the use in solvent based and solvent free coatings of different compositions. W´Add 603 can be used as antifoam agent and defoamer in very different systems. The well-balanced composition improves normal substrate wetting as well as flow at the same time. The active ingredients correspond to FDA-§ 175.300. Application fields are can coatings, airdrying industrial coatings, wood and furniture coatings, solvent free UV-systems as well as EP-coatings. 表示を減らす | |
| WorléeAdd 604 N | Worlée-Chemie G.m.b.H. | WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with vario...もっと表示する WorléeAdd 604 N is a silicone containing defoamer and antifoam additive especially for water thinnable wood and parquet lacquers based on acrylic emulsions and/or PUR emulsions. It shows good effectiveness on all surfaces and good compatibility with various emulsion polymers. The product can be directly dispersed into aqueous systems and can be used in basic as well as in acidic lacquers. Sufficient shear forces should be used. 表示を減らす | |
| WorléeAdd 678 | Worlée-Chemie G.m.b.H. | WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous...もっと表示する WorléeAdd 678 is a silicone free defoamer and anti-foam agent for solvent based and solvent free systems. W´Add 678 is mainly used to avoid foam and as defoaming agent in one- and two component PUR paints and coatings. This product is a clear, low viscous liquid. 表示を減らす |
