| Baymedix® AP501 | Covestro | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| Desmodur® E 1160 MPA/X | Covestro | Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for m...もっと表示する Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and chemical damage. 表示を減らす | |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...もっと表示する Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. 表示を減らす | |
| Desmodur® I | Covestro | Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...もっと表示する Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. 表示を減らす | |
| Silmer®ACR D2 | Siltech Corp. | Silmer®ACR D2 is a reactive multi-functional silicone acrylate pre-polymer. It is also used to modify acrylate polymers to improve its surface and physical properties. Silmer®ACR D2 is used in UV cured coatings systems. | |
| Silmer®ACR D208 | Siltech Corp. | Silmer®ACR D208 is a water-soluble multi-functional silicone acrylate pre-polymer. It has a specific gravity of 1.07 and a viscosity of 300 - 1000. Silmer®ACR D208 is used as an additive in UV curing systems as well as to modify acrylate polymers to impro...もっと表示する Silmer®ACR D208 is a water-soluble multi-functional silicone acrylate pre-polymer. It has a specific gravity of 1.07 and a viscosity of 300 - 1000. Silmer®ACR D208 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physical properties. 表示を減らす | |
| Silmer®ACR Di-10 | Siltech Corp. | Silmer®ACR Di-10 is a 100% active silicone acrylate pre-polymer. It has a specific gravity of .96 and a viscosity of 20 - 70. Silmer®ACR Di-10 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physic...もっと表示する Silmer®ACR Di-10 is a 100% active silicone acrylate pre-polymer. It has a specific gravity of .96 and a viscosity of 20 - 70. Silmer®ACR Di-10 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physical properties. 表示を減らす | |
| Silmer®ACR Di-1508 | Siltech Corp. | Silmer®ACR Di-1508 is a water-dispersable di-functional silicone acrylate pre-polymer. It has a specific gravity of 1.04 and a viscosity of 750-2,500. Silmer®ACR Di-1508 is used as an additive in UV curing systems as well as to modify acrylate polymers to...もっと表示する Silmer®ACR Di-1508 is a water-dispersable di-functional silicone acrylate pre-polymer. It has a specific gravity of 1.04 and a viscosity of 750-2,500. Silmer®ACR Di-1508 is used as an additive in UV curing systems as well as to modify acrylate polymers to improve surface and physical properties. 表示を減らす | |
| Silmer®ACR Di-2510 | Siltech Corp. | Silmer®ACR Di-2510 is a 100% active cross-linkable silicone acrylate pre-polymer. It is used as an additive in UV/EB curing coatings systems to improve the surface and physical properties of various polymers. | |
| Silmer®ACR Di-4510-O | Siltech Corp. | Silmer®ACR Di-4510-O is a 100% active cross-linkable silicone acrylate pre-polymer. It is used as an additive in UV/EB curing coatings systems to improve the surface and physical properties of various polymers. |
