| Baymedix® AP501 | Covestro | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| Desmodur® E 1160 MPA/X | Covestro | Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for m...もっと表示する Desmodur® E 1160 MPA/X is an aromatic prepolymer based on toluene diisocyanate (TDI). It is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and chemical damage. 表示を減らす | |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...もっと表示する Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. 表示を減らす | |
| Desmodur® I | Covestro | Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and po...もっと表示する Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. 表示を減らす | |
| Sodium Bichromate | Qingdao Sun Chemical Corporation Limited | Sodium Bichromate is mainly used in the manufacture of Chromic acid, Chrome pigment and other chromic salts. It is also used in the industries of tanning leather, textile, electroplating, medicine, oil and fat, petroleum, dye and drilling, etc. This produ...もっと表示する Sodium Bichromate is mainly used in the manufacture of Chromic acid, Chrome pigment and other chromic salts. It is also used in the industries of tanning leather, textile, electroplating, medicine, oil and fat, petroleum, dye and drilling, etc. This product is a bright orange, needle or small-granular crystal. It deliquesces easily in air, dissolves very easily in water and becomes an acidic and orange solution. In acid mediums, Sodium Bichromate is a strong oxidant. 表示を減らす | |
| Soya Lecithin | Qingdao Sun Chemical Corporation Limited | Soya Lecithin is a light yellow to brown transparent or semitransparent ropy liquid matter. It is produced from fresh soya, and is ideal for use in paint, food and feed industries. This product has an acetone insolubles content of 62% min., an aether inso...もっと表示する Soya Lecithin is a light yellow to brown transparent or semitransparent ropy liquid matter. It is produced from fresh soya, and is ideal for use in paint, food and feed industries. This product has an acetone insolubles content of 62% min., an aether insolubles content of 0.3% max., and an acid value of 28mg KOH/g. 表示を減らす | |
| Soya Oil Fatty Acid | Qingdao Sun Chemical Corporation Limited | Soya Oil Fatty Acid has a freezing point of 28ºC max., and is mainly used in paint industry to produce alkyd resin for paint applications. It can also be used in cosmetics, detergent, soap, rubber, surfactant, plastic, textile, and auxiliary agents. This ...もっと表示する Soya Oil Fatty Acid has a freezing point of 28ºC max., and is mainly used in paint industry to produce alkyd resin for paint applications. It can also be used in cosmetics, detergent, soap, rubber, surfactant, plastic, textile, and auxiliary agents. This product has an iodine value of 120-130g/100g, an acid value of 195-202mg/g, and a saponification value of 196-205. 表示を減らす |
