| 2-(2-Aminoethoxy) ethanol | Univar Solutions | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | Request Sample |
| Acrylic Acid, Glacial | Univar Solutions | This is glacial acrylic acid. | Request Sample |
| ALKOPON® NS | Indorama Ventures | ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the ...もっと表示する ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the main surfactant used as a detergent and foaming agent in toothpaste formulas. Due to its higher Krafft point compared to ether sulfates, it is an excellent choice for pearled formulations and cream cleansers. This product can be used in shampoos, liquid soaps, bubble baths, toothpastes, hand dishwashing detergents, fine fabric wash, liquid laundry detergents and household hard surface cleaners such as glass cleaners and bathroom cleaners. ALKOPON® NS is also used in polymerization of PVC, acrylic resin, vinyl acetates, acrylates, methacrylates, styrene, butadiene, etc. 表示を減らす | |
| Charmor™ DP15 | Univar Solutions | Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as c...もっと表示する Charmor™ DP15 is a white super-micronized (particle size < 15 μm) dipentaerythritol derivative in powder form. Charmor™ DP15 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP15 is used as carbon source for halogen free systems demanding lower smoke release rate and non-toxic fumes. 表示を減らす | Request Sample |
| Charmor™ DP40 | Univar Solutions | Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon ...もっと表示する Charmor™ DP40 is a white micronized (particle size < 40 μm) dipentaerythritol derivative in powder form. Charmor™ DP40 has low water solubility and is suitable for outdoor applications. In intumescent systems for plastics, Charmor™ DP40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. 表示を減らす | Request Sample |
| Charmor™ PM15 | Univar Solutions | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...もっと表示する Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. 表示を減らす | Request Sample |
| Charmor™ PM40 | Univar Solutions | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...もっと表示する Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. 表示を減らす | Request Sample |
| Charmor™ Pro DP40 C40 | Univar Solutions | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...もっと表示する Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. 表示を減らす | Request Sample |
| Charmor™ PT40 | Univar Solutions | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...もっと表示する Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. 表示を減らす | Request Sample |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | Univar Solutions | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...もっと表示する Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). 表示を減らす | Request Sample |
| DIETHYLENE GLYCOL | Indorama Ventures | DIETHYLENE GLYCOL is produced when reacting MEG with an additional mole of ethylene oxide. This product is ideally used for coolant additives, cement additives, synthesis agents, wetting and plasticizing agents, agrochemical, resins and other applications...もっと表示する DIETHYLENE GLYCOL is produced when reacting MEG with an additional mole of ethylene oxide. This product is ideally used for coolant additives, cement additives, synthesis agents, wetting and plasticizing agents, agrochemical, resins and other applications. This product has a chemical description of Diglycol Dihydroxy-diethyl Ether 2.2-Oxidietanole. 表示を減らす | |
| Diethylene triamine | Univar Solutions | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...もっと表示する Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). 表示を減らす | Request Sample |
| Diisopropanolamine | Univar Solutions | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...もっと表示する Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. 表示を減らす | Request Sample |
| DOWSIL™ 3074 Intermediate | Univar Solutions | Dow Corning® 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low ...もっと表示する Dow Corning® 3074 Intermediate is a silicone resin intermediate used in combination with organic resins via cold-blends or prereaction. It improves weatherability and heat resistance, or with phenyl-containing silicone resin as a reactive diluent for low VOC high temperature coatings. 表示を減らす | Request Sample |
| Ethylene diamine | Univar Solutions | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...もっと表示する Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. 表示を減らす | Request Sample |
| Glycol Ether EB | Univar Solutions | This is Ethylene Glycol Monobutyl Ether. | Request Sample |
| Methyl Formate | Univar Solutions | Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specific...もっと表示する Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specifically in polyurethane foams. It is also used as a chemical intermediate and solvent in the production of fine chemicals, fumigants, and insecticides. 表示を減らす | Request Sample |
| MONOETHYLENE GLYCOL GC | Indorama Ventures | MONOETHYLENE GLYCOL GC is the simplest of the ethylene glycols (EGs), and is obtained from the reaction of one mole of water with one mole of ethylene oxide. This product can be used as a coolant additive, synthesis agent, and as a wetting and plasticizin...もっと表示する MONOETHYLENE GLYCOL GC is the simplest of the ethylene glycols (EGs), and is obtained from the reaction of one mole of water with one mole of ethylene oxide. This product can be used as a coolant additive, synthesis agent, and as a wetting and plasticizing agent in agrochemical, polyester, and resin applications. 表示を減らす | |
| MONOETHYLENE GLYCOL GF | Indorama Ventures | MONOETHYLENE GLYCOL GF results from the reaction of water with ethylene oxide. This product can be used as a coolant additive, synthesis agent, and as a wetting and plasticizing agent in agrochemical, polyester, and resin applications. | |
| MONOETHYLENE GLYCOL GI | Indorama Ventures | MONOETHYLENE GLYCOL GI is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing a...もっと表示する MONOETHYLENE GLYCOL GI is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing agents in agrochemical applications; as a cement additive, and as a wetting and plasticizing agent in polyesters and resins. 表示を減らす | |
| MONOETHYLENE GLYCOL H | Indorama Ventures | MONOETHYLENE GLYCOL H is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing ag...もっと表示する MONOETHYLENE GLYCOL H is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing agents in agrochemical applications; as a cement additive, and as a wetting and plasticizing agent in polyesters and resins. 表示を減らす | |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | Univar Solutions | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modifi...もっと表示する N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. 表示を減らす | Request Sample |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | Univar Solutions | N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equ...もっと表示する N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine is a cross linker for epoxy resins. N,N'-Bis-(3-aminopropyl)-ethylene diamine is used for two-component epoxy coatings, epoxy-based adhesives and plastic parts. Due to its high functionality and low equivalent weight, N,N'-Bis-(3-aminopropyl)-ethylene diamine enables high cross linking density. 表示を減らす | Request Sample |
| N,N-Diethylethanol-amine | Univar Solutions | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...もっと表示する N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. 表示を減らす | Request Sample |
| Oxymer™ HD112 | Univar Solutions | Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinker...もっと表示する Oxymer™ HD112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 1000g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. 表示を減らす | Request Sample |
| Oxymer™ HD56 | Univar Solutions | Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers...もっと表示する Oxymer™ HD56 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product has a molecular weight of 2000 g/mol and is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. 表示を減らす | Request Sample |
| Oxymer™ M112 | Univar Solutions | Oxymer™ M112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. Oxymer™ M112 has low surface energy ben...もっと表示する Oxymer™ M112 is an aliphatic polycarbonate diol that provides hydrolytic, UV, and oxidative stability. This product is used as a chemical building block in polyurethane dispersions, paint additives and crosslinkers. Oxymer™ M112 has low surface energy beneficial for good wetting characteristics and provides a high hardness characteristic. 表示を減らす | Request Sample |
| Polyol PX | Univar Solutions | Polyol PX is a mixture of polyhydric alcohols. It is a solid amorphous material used as chemical building block and in liquid phenolic resins. | Request Sample |
| Polyol PX 70 | Univar Solutions | Polyol PX 70 Polyol PX 70 is a mixture of polyhydric alcohols. It is liquid solution with 70 % Polyol PX in water. Polyol PX is used as chemical building block and in liquid phenolic resins in paints, resins, and polishes. | Request Sample |
| Propylene Glycol | Univar Solutions | This is Propylene Glycol meant for industrial use. | Request Sample |
| Tetraethylenepentamine (TEPA) | Univar Solutions | Tetraethylenepentamine (TEPA) is principally a mixture of four TEPA ethyleneamines with close boiling points including linear, branched, and two cyclic TEPA products, and higher molecular weight products. | Request Sample |
| Triethylamine anhydrous | Univar Solutions | Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for ...もっと表示する Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for two-component paints. Triethylamine is suitable as neutralization agent in waterborne paints based on polyesters, alkyds, acrylic resins and polyurethanes containing carboxyl or other acidic groups. Due to excellent water solubility and lack of active hydrogen atoms, triethylamine is often used for the production of water-borne polyurethane dispersions. 表示を減らす | Request Sample |
| TRIETHYLENE GLYCOL | Indorama Ventures | TRIETHYLENE GLYCOL results from the reaction of water with ethylene oxide. By adding a third mole of ethylene oxide, TRIETHYLENE GLYCOL (TEG) is obtained. Applications for this product include synthesis agents, coolant additives, cement additives, wetting...もっと表示する TRIETHYLENE GLYCOL results from the reaction of water with ethylene oxide. By adding a third mole of ethylene oxide, TRIETHYLENE GLYCOL (TEG) is obtained. Applications for this product include synthesis agents, coolant additives, cement additives, wetting and plasticizing agents, agrochemical, polyester, and resin. 表示を減らす | |
| Triethylenetetramine (TETA) | Univar Solutions | Triethylenetetramine is a mixture of four TETA ethyleneamines with close boiling points including linear, branched and two cyclic molecules. | Request Sample |
| Triphenylphosphine | Univar Solutions | Triphenylphosphine is a catalyst for epoxy reactions. Triphenylphosphine is used in resin production, e.g. for epoxy modification used in CED-coatings. | Request Sample |
| ULTRATINT® BP | Indorama Ventures | ULTRATINT® BP is an ethoxylated bisphenol obtained from the reaction of bisphenol A with ethylene oxide. It is a clear, slightly yellow liquid that is ideal for paints and varnishes applications. This product is used in the synthesis of resins and in the ...もっと表示する ULTRATINT® BP is an ethoxylated bisphenol obtained from the reaction of bisphenol A with ethylene oxide. It is a clear, slightly yellow liquid that is ideal for paints and varnishes applications. This product is used in the synthesis of resins and in the formulas of industrial paints, promoting excellent finishing properties. Its surfactant function provides industrial paints with better leveling and adhesion. . 表示を減らす |
