| ALKOPON® NS | Indorama Ventures | ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the ...もっと表示する ALKOPON® NS consists of anionic surfactants derived from the reaction of fatty alcohols or ethoxylated fatty alcohols with SO3, followed by neutralization with alkali. It is a completely biodegradable sodium lauryl ether sulfate (30%). ALKOPON® NS is the main surfactant used as a detergent and foaming agent in toothpaste formulas. Due to its higher Krafft point compared to ether sulfates, it is an excellent choice for pearled formulations and cream cleansers. This product can be used in shampoos, liquid soaps, bubble baths, toothpastes, hand dishwashing detergents, fine fabric wash, liquid laundry detergents and household hard surface cleaners such as glass cleaners and bathroom cleaners. ALKOPON® NS is also used in polymerization of PVC, acrylic resin, vinyl acetates, acrylates, methacrylates, styrene, butadiene, etc. 表示を減らす | |
| DIETHYLENE GLYCOL | Indorama Ventures | DIETHYLENE GLYCOL is produced when reacting MEG with an additional mole of ethylene oxide. This product is ideally used for coolant additives, cement additives, synthesis agents, wetting and plasticizing agents, agrochemical, resins and other applications...もっと表示する DIETHYLENE GLYCOL is produced when reacting MEG with an additional mole of ethylene oxide. This product is ideally used for coolant additives, cement additives, synthesis agents, wetting and plasticizing agents, agrochemical, resins and other applications. This product has a chemical description of Diglycol Dihydroxy-diethyl Ether 2.2-Oxidietanole. 表示を減らす | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| Hydrorene AW 1 | S.A.P.I.C.I. SpA | Hydrorene AW 1 is a water-dispersible isocyanate. This product can be used in 2k waterborne varnishes with good chemical or abrasion resistance. It can also be used in adhesives. | |
| MONOETHYLENE GLYCOL GC | Indorama Ventures | MONOETHYLENE GLYCOL GC is the simplest of the ethylene glycols (EGs), and is obtained from the reaction of one mole of water with one mole of ethylene oxide. This product can be used as a coolant additive, synthesis agent, and as a wetting and plasticizin...もっと表示する MONOETHYLENE GLYCOL GC is the simplest of the ethylene glycols (EGs), and is obtained from the reaction of one mole of water with one mole of ethylene oxide. This product can be used as a coolant additive, synthesis agent, and as a wetting and plasticizing agent in agrochemical, polyester, and resin applications. 表示を減らす | |
| MONOETHYLENE GLYCOL GF | Indorama Ventures | MONOETHYLENE GLYCOL GF results from the reaction of water with ethylene oxide. This product can be used as a coolant additive, synthesis agent, and as a wetting and plasticizing agent in agrochemical, polyester, and resin applications. | |
| MONOETHYLENE GLYCOL GI | Indorama Ventures | MONOETHYLENE GLYCOL GI is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing a...もっと表示する MONOETHYLENE GLYCOL GI is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing agents in agrochemical applications; as a cement additive, and as a wetting and plasticizing agent in polyesters and resins. 表示を減らす | |
| MONOETHYLENE GLYCOL H | Indorama Ventures | MONOETHYLENE GLYCOL H is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing ag...もっと表示する MONOETHYLENE GLYCOL H is the simplest of the ethylene glycols (EGs), is obtained from the reaction of one mole of water with one mole of ethylene oxide. Applications for this product include coolant additives, synthesis agents, wetting and plasticizing agents in agrochemical applications; as a cement additive, and as a wetting and plasticizing agent in polyesters and resins. 表示を減らす | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...もっと表示する Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. 表示を減らす | |
| Polurene LP 1810 | S.A.P.I.C.I. SpA | Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...もっと表示する Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. 表示を減らす | |
| Polurene MD 60 AB | S.A.P.I.C.I. SpA | Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating t...もっと表示する Polurene MD 60 AB is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. It can be used in coatings. When used in combination with isocyanurates, it can improve scratch resistance and overcoating tendencies, resulting in a smooth surface with good brightness. It also improves adhesion on difficult substrates. 表示を減らす | |
| Polurene MD 70 AE | S.A.P.I.C.I. SpA | Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good b...もっと表示する Polurene MD 70 AE is a polyfunctional polyisocyanate prepolymer based on MDI. This product dries quickly with good flexibility. When used in combination with isocyanates, it improves scratch resistance and overcoatings giving a smooth surface and good brightness. It can be used in 1K barrier coatings for wood with high oil content. 表示を減らす | |
| Polurgreen M 570 | S.A.P.I.C.I. SpA | Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems ...もっと表示する Polurgreen M 570 is a prepolymer. This product cures quickly with good abrasion resistance and elasticity. It can be used in matt or high gloss parquet coatings. Polurgreen M 570 is particularly recommended for the formulation of low-viscosity systems with high solids content. It contains less than .5% TDI isocyanates. 表示を減らす | |
| TRIETHYLENE GLYCOL | Indorama Ventures | TRIETHYLENE GLYCOL results from the reaction of water with ethylene oxide. By adding a third mole of ethylene oxide, TRIETHYLENE GLYCOL (TEG) is obtained. Applications for this product include synthesis agents, coolant additives, cement additives, wetting...もっと表示する TRIETHYLENE GLYCOL results from the reaction of water with ethylene oxide. By adding a third mole of ethylene oxide, TRIETHYLENE GLYCOL (TEG) is obtained. Applications for this product include synthesis agents, coolant additives, cement additives, wetting and plasticizing agents, agrochemical, polyester, and resin. 表示を減らす | |
| Ucopol M 2851 | S.A.P.I.C.I. SpA | Ucopol M 2851 is a moisture-curing prepolymer. This product is abrasion-resistant with good flexibility. It can be used as a coating for non-skid flooring applications, parquets, or gymnasium floors. In particular, it can be used as an impregnating age...もっと表示する Ucopol M 2851 is a moisture-curing prepolymer. This product is abrasion-resistant with good flexibility. It can be used as a coating for non-skid flooring applications, parquets, or gymnasium floors. In particular, it can be used as an impregnating agent in order to protect products from humidity. This product contains less than .5% TDI isocyanates. 表示を減らす | |
| Ucopol M 33 60 Mpax | S.A.P.I.C.I. SpA | Ucopol M 33 60 Mpax is a moisture curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring applications. This product is an abrasion- and dust-resistant polyurethan...もっと表示する Ucopol M 33 60 Mpax is a moisture curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring applications. This product is an abrasion- and dust-resistant polyurethane coating. It contains less than .5% TDI isocyanates. 表示を減らす | |
| Ucopol M 33 60 Mpax LV | S.A.P.I.C.I. SpA | Ucopol M 33 60 Mpax LV is a moisture-curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring. This product is an abrasion- and dust-resistant polyurethane coating....もっと表示する Ucopol M 33 60 Mpax LV is a moisture-curing prepolymer. This product dries quickly with good hardness and flexibility. It can be used as a coating for parquet or industrial flooring. This product is an abrasion- and dust-resistant polyurethane coating. This product contains less than .3% TDI isocyanates. 表示を減らす | |
| Ucopol M 4054 | S.A.P.I.C.I. SpA | Ucopol M 4054 is a moisture-curing prepolymer. This product dries quickly with good surface hardness, abrasion resistance and good brightness. It can be used in parquet or plastic coatings. This product contains less than .5% TDI isocyanates. | |
| Ucopol M 505 | S.A.P.I.C.I. SpA | Ucopol M 505 is a moisture-curing prepolymer. This product has good flexibility and weather resistance. It can be used in coatings for wood, plastics, concrete, rubber, textile fabrics, and leather. This product contains less than .5% TDI isocyanates. | |
| Ucopol M 541 | S.A.P.I.C.I. SpA | Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5%...もっと表示する Ucopol M 541 is a moisture-curing prepolymer. This product can be used to formulate 1K and 2K sealants and adhesives. It can be mixed with Ucopol M 551 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. 表示を減らす | |
| Ucopol M 551 | S.A.P.I.C.I. SpA | Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% ...もっと表示する Ucopol M 551 is a moisture-curing prepolymer. This product can be used to formulate 1K or 2K sealants and adhesives. It can be mixed with Ucopol M 541 in order to adjust the end product's flexibility or drying time. This product contains less than .5% TDI isocyanates. 表示を減らす | |
| Ucopol M 603 | S.A.P.I.C.I. SpA | Ucopol M 603 is a moisture-curing prepolymer. This product is solvent-free and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability. This product has a shorter cross-linking time than Ucopol M 60...もっと表示する Ucopol M 603 is a moisture-curing prepolymer. This product is solvent-free and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability. This product has a shorter cross-linking time than Ucopol M 602. 表示を減らす | |
| Ucopol W 708 | S.A.P.I.C.I. SpA | Ucopol W 708 is a moisture-curing prepolymer. This product has good chemical, weather, and yellowing resistance. It can be used in wood, plastic and concrete coatings. This product has less than .5% HDI isocyanates. | |
| ULTRATINT® BP | Indorama Ventures | ULTRATINT® BP is an ethoxylated bisphenol obtained from the reaction of bisphenol A with ethylene oxide. It is a clear, slightly yellow liquid that is ideal for paints and varnishes applications. This product is used in the synthesis of resins and in the ...もっと表示する ULTRATINT® BP is an ethoxylated bisphenol obtained from the reaction of bisphenol A with ethylene oxide. It is a clear, slightly yellow liquid that is ideal for paints and varnishes applications. This product is used in the synthesis of resins and in the formulas of industrial paints, promoting excellent finishing properties. Its surfactant function provides industrial paints with better leveling and adhesion. . 表示を減らす |
