| EFKA® FA 4600 | BASF Formulation Additives | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...もっと表示する EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. 表示を減らす | |
| 1,4-Cyclohexane dimethanol divinyl ether | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether is a reactive diluent for unsaturated oligomers, UV curable coatings and inks. | |
| N-Vinyl-caprolactam (NVC) | BASF Corporation, Chemical Intermediates | N-Vinyl-caprolactam (NVC) is reactive diluent (monomer) for radiation curing. N-Vinyl-caprolactam is highly reactive for radical polymerization and offers excellent wetting and adhesion. | |
| HYDROPALAT® WE 3650 | BASF Formulation Additives | HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilizat...もっと表示する HYDROPALAT® WE 3650 is a clear, colorless to slightly yellow liquid. It is a highly effective wetting agent for water based coating and ink applications. The product shows excellent dynamic surface tension reduction in combination with low foam stabilization. HYDROPALAT® WE 3650 can effectively be used in lacquers or inks that show problems regarding substrate wetting or cratering. Due to its wetting properties the product can also have a positive effect on ink transfer and adhesion. 表示を減らす | |
| DISPEX® Ultra FA 4416 | BASF Formulation Additives | DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-...もっと表示する DISPEX® Ultra FA 4416 is a wetting and dispersing agent for aqueous coatings with high gloss, color strength and excellent rub-out properties. It is designed for aqueous top coats based on various binder types’ e.g. polyester solutions, polyacrylics, PUR-emulsions. With its excellent wetting properties, DISPEX® Ultra FA 4416 when used with inorganic and organic pigments produces a high gloss and good color development in low and co-solvent free systems. DISPEX® Ultra FA 4416 prevents rub-out effects by using critical pigment combinations, e.g. titanium dioxide / phthalo blue. It is suitable for air and oven drying coatings as well as baking coatings. Since DISPEX® Ultra FA 4416 has no effect on pot-life it is also recommended for aqueous 2 pack PUR coatings. It allows the formulation of economical inorganic slurries and pigment concentrates for emulsion paints and consumer coatings. Here it combines the advantages of a low paste-viscosity with anti-settling characteristics and excellent compatibility to all types of aqueous base-paints. 表示を減らす | |
| RHEOVIS® HS 1332 | BASF Formulation Additives | RHEOVIS® HS 1332 is a an excellent rheology-control thickener of water based coatings to increase viscosity in the mid- to high-shear range. It is a hydrophobic modified acrylic swellable copolymer emulsion (HASE) in water. The polymer provides the rheolo...もっと表示する RHEOVIS® HS 1332 is a an excellent rheology-control thickener of water based coatings to increase viscosity in the mid- to high-shear range. It is a hydrophobic modified acrylic swellable copolymer emulsion (HASE) in water. The polymer provides the rheology-control effect through extensive swelling of the high-molecular-weight polymer in combination with a hydrophobic component in alkali, in the presence of water. 表示を減らす | |
| HYDROPALAT® WE 3323 | BASF Formulation Additives | HYDROPALAT® WE 3323 is a non-ionic, 100% active wetting agent effective in water borne inks, OPV’s, and coatings intended for plastic, wood, and metal substrates. This wetting agent is effective in a wide variety of emulsion types including acrylics, styr...もっと表示する HYDROPALAT® WE 3323 is a non-ionic, 100% active wetting agent effective in water borne inks, OPV’s, and coatings intended for plastic, wood, and metal substrates. This wetting agent is effective in a wide variety of emulsion types including acrylics, styrenated acrylics and PUD’s. HYDROPALAT® WE 3323, in addition to its outstanding wetting properties, does not stabilize foam and can act as a defoamer in many coating and graphic art formulations. In addition, increasing levels of HYDROPALAT® WE 3323 wetting agents typically reduces foam content in coatings rather than increases it, as is typical of most competitive wetting agents. 表示を減らす | |
| DISPEX® Ultra PA 4560 | BASF Formulation Additives | DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior...もっと表示する DISPEX® Ultra PA 4560 is a modified polyacrylate that is pH-independent and has a wide-spread compatibility in most commonly used waterborne decorative coatings. It provides improved gloss, color strength, flocculation stability and anti-flooding behavior. DISPEX® Ultra PA 4560 is, in combination with DISPEX® Ultra PA 4503, suitable to formulate VOC-free tinting concentrates for both water- and solvent-based decorative paints. These concentrates have excellent compatibility and can therefore be incorporated by the use of low shear forces (shaking machines). 表示を減らす | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra ...もっと表示する DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. 表示を減らす | |
| EFKA® SL 3299 | BASF Formulation Additives | EFKA® SL 3299 is a very effective additive, which increases slip, surface smoothness and gloss. Due to its excellent compatibility properties, it is very suitable for use in high-gloss clear wood coatings. | |
| EFKA® FA 4644 | BASF Formulation Additives | EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigm...もっと表示する EFKA® FA 4644 is a transparent, yellowish liquid additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This means reduced dispersion time, stabilization of the pigment dispersion, decreased pigment sedimentation, and increased gloss and improved flow. EFKA® FA 4644 is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. 表示を減らす | |
| DISPEX® Ultra FA 4431 | BASF Formulation Additives | DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especia...もっと表示する DISPEX® Ultra FA 4431 is a wetting and dispersing agent for inorganic pigments and fillers in solventbased, solvent-free and water-based systems. It can be used in all solvent-based and solvent-free industrial and decorative coating systems. It is especially suitable for wetting, dispersion and stabilization of inorganic pigments and fillers in solvent-free epoxy and polyurethane systems, like flooring or pipe-line coatings. DISPEX® Ultra FA 4431 can also be used to decrease the viscosity of water-based resin-free inorganic pigment concentrates, based on high molecular weight dispersing agents like DISPEX® Ultra PA 4550. In addition DISPEX® Ultra FA 4431 is suitable for dispersion and stabilization of inorganic pigments and fillers in water-based decorative paints based on acrylic emulsions, achieving a better rheology and improved gloss. 表示を減らす | |
| DISPEX® AA 4140 | BASF Formulation Additives | DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of ...もっと表示する DISPEX® AA 4140 is a derivative of a family of highly effective, low viscosity dispersing agents for water-borne coating systems. The product is especially suited for the dispersion of inorganic pigments. DISPEX® AA 4140 is a solution of a sodium salt of an acrylic polymer in water. This straw colored liquid is effective over a pH range 5-12 and up to temperatures in excess of 100°C. Compared with inorganic dispersing agents, e.g. polyphosphate products, the organic polymer based DISPEX® N40 provides improved storage stability of both the pigment dispersion and the formulated paint. There is little or no adverse reaction to high temperatures or pH changes. 表示を減らす | |
| FOAMASTER® MO NXZ NC | BASF Formulation Additives | FOAMASTER® MO NXZ NC is a liquid defoamer for emulsion paints and adhesive systems. It is based on styrene-butadiene, acrylic, polyvinyl chloride and its copolymers, ethylene vinyl acetate, vinylidene chloride and water-soluble alkyds. It has improved dis...もっと表示する FOAMASTER® MO NXZ NC is a liquid defoamer for emulsion paints and adhesive systems. It is based on styrene-butadiene, acrylic, polyvinyl chloride and its copolymers, ethylene vinyl acetate, vinylidene chloride and water-soluble alkyds. It has improved dispersability over Foamaster® MO NDW NC. 表示を減らす | |
| FOAMSTAR® ST 2410 | BASF Formulation Additives | FOAMSTAR® ST 2410 represents a novel series of defoamers based on new defoamer chemistry. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® defoams on a molecular le...もっと表示する FOAMSTAR® ST 2410 represents a novel series of defoamers based on new defoamer chemistry. FOAMSTAR® is a defoaming molecule that defoams by a different mechanism. Unlike conventional defoamers (mineral oil or silicone), FOAMSTAR® defoams on a molecular level. It also has wetting properties not found in other conventional defoamers. 表示を減らす | |
| RHEOVIS® PU 1251 | BASF Formulation Additives | RHEOVIS® PU 1251 is an extremely efficient, solvent-free non-ionic, associative rheology modifier designed to improve dry coating performance and appearance while improving application properties of latex based coatings and adhesives. It features built-in...もっと表示する RHEOVIS® PU 1251 is an extremely efficient, solvent-free non-ionic, associative rheology modifier designed to improve dry coating performance and appearance while improving application properties of latex based coatings and adhesives. It features built-in wetting/coalescing agents that improve compatibility and ease of incorporation into formulations. It is a mid-shear thickener with slight pseudoplasticity. 表示を減らす | |
| FOAMSTAR® ED 2522NC | BASF Formulation Additives | FOAMSTAR® ED 2522 NC is a high performance, ultra-low SVOC silicone emulsion defoamer for premium water-based paints, clear coats and inks. It is an emulsion of organo-modified silicones. This defoamer is specifically designed for the following applicatio...もっと表示する FOAMSTAR® ED 2522 NC is a high performance, ultra-low SVOC silicone emulsion defoamer for premium water-based paints, clear coats and inks. It is an emulsion of organo-modified silicones. This defoamer is specifically designed for the following applications: premium water based architectural paints; industrial coatings; wood coatings; and printing inks and over print varnishes (OPVS). 表示を減らす | |
| JONCRYL® PRO 1522 | BASF Dispersions & Resins | Joncryl® PRO 1522 is an emulsion for direct-to-metal applications. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion offers exterior durability, is compatible ...もっと表示する Joncryl® PRO 1522 is an emulsion for direct-to-metal applications. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion offers exterior durability, is compatible with anti-corrosive pigments, and can be formulated between 100 – 250 g/l VOC. Recommended applications include interior/exterior general metal industrial coatings applications and OEM industrial direct-to-metal applications that require high gloss (> 80 at 60°) and a dry film thickness of 25 – 40 microns (1 – 1.5 mils). 表示を減らす | |
| JONCRYL® 550 | BASF Dispersions & Resins | Joncryl® 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially ...もっと表示する Joncryl® 550 is a solvent variation of a hydroxyl-functional acrylic oligomer designed for conventional solids isocyanate crosslinked systems. This product is a drop-in replacement with minimum levels of reformulation and testing for several commercially available competitive acrylic polymers. It is a typical “workhorse”, conventional solid acrylic resin that is supplied in a 65/35 blend of PM-acetate/toluene. Joncryl® 550 differs from Joncryl® 587 in that it is slightly faster curing, slower drying, and does not have quite the outstanding UV durability properties of Joncryl® 587. 表示を減らす | |
| EFKA® PX 4340 | BASF Formulation Additives | EFKA® PX 4340 is a high molecular weight dispersing agent for deflocculation of organic pigments in solvent based systems. It is specially designed for use in solvent-based high-end performance coatings systems, such as automotive OEM and refinish. It als...もっと表示する EFKA® PX 4340 is a high molecular weight dispersing agent for deflocculation of organic pigments in solvent based systems. It is specially designed for use in solvent-based high-end performance coatings systems, such as automotive OEM and refinish. It also is highly suitable for CAB base-coats and all topcoats. EFKA® PX 4340, due to the very wide compatibility in most current systems used in solvent-based coatings, is especially suitable for the production of Resin Minimal Pigment Concentrates (RMPC) in combination with a multi compatible dispersing resin. 表示を減らす | |
| EFKA® SI 2722 | BASF Formulation Additives | EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in ...もっと表示する EFKA® SI 2722 produces rapid de-aeration of solvent-free epoxy and polyurethane compounds so that foam and blister-free self-leveling coatings can be produced. It acts as a leveling agent, giving a smooth surface to the coating. EFKA® 2722 can be used in pigmented or non-pigmented resin systems such as solvent-free epoxy systems and solvent-free polyurethane systems. 表示を減らす | |
| EFKA® PU 4010 | BASF Formulation Additives | EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, impr...もっと表示する EFKA® PU 4010 is a high-molecular-weight dispersing agent. It is a polymeric dispersant for stabilizing inorganic pigments including carbon blacks. It also has an excellent performance in many organic pigments. This results in: reduced grinding time, improved gloss, prevention of flooding and floating problems and higher color strength. Due to its particularly good combination of price and performance, EFKA® PU 4010 is a very attractive substitute for conventional wetting and dispersing agents. It is possible to mix combinations of inorganic pigments stabilized with EFKA® PU 4010 and organic pigments stabilized with other EFKA® highmolecular-weight polymeric dispersants. 表示を減らす | |
| EFKA® PU 4046 | BASF Formulation Additives | EFKA® PU 4046 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. EFKA® PU 4046 is ...もっと表示する EFKA® PU 4046 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. EFKA® PU 4046 is used for all kinds of solvent-based coatings as well as pigment concentrates. 表示を減らす | |
| EFKA® PU 4047 | BASF Formulation Additives | EFKA® PU 4047 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. The higher molecu...もっと表示する EFKA® PU 4047 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for all kinds of solvent borne coatings as well as pigment concentrates. The higher molecular weight of EFKA® PU 4047 compared to EFKA® PU 4046 gives stronger deflocculation results with some organic pigments and carbon blacks. In spite of its higher molecular weight, EFKA® PU 4047 has a wide compatibility with all kinds of resins. Pigment concentrates based on EFKA® PU 4047 show lower viscosity than concentrates made with any other EFKA® polymeric dispersants and can even be used in pure let downs based on white spirit. 表示を減らす | |
| EFKA® PU 4050 | BASF Formulation Additives | EFKA® PU 4050 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...もっと表示する EFKA® PU 4050 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. 表示を減らす | |
| EFKA® PU 4080 | BASF Formulation Additives | EFKA® PU 4080 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for automotive OEM and refinish topcoats, coil coatings and other high quality industrial ...もっと表示する EFKA® PU 4080 is a modified polyurethane that improves gloss and reduces flooding problems. It gives higher color strength and lower viscosity. This product is used for automotive OEM and refinish topcoats, coil coatings and other high quality industrial solvent born coatings. It is also suitable for use in pigment concentrates. 表示を減らす | |
| EFKA® PX 4300 | BASF Formulation Additives | EFKA® PX 4300 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX...もっと表示する EFKA® PX 4300 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4300 is suitable for stabilizing pigments in solvent-based coatings. This results in: high color strength, good stability against flooding, floating and flocculation, and strong viscosity-depressing effects. 表示を減らす | |
| EFKA® PA 4400 | BASF Formulation Additives | EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all...もっと表示する EFKA® PA 4400 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems, higher color strength and lower viscosity. This product is used in all kinds of solvent borne coatings. EFKA® PA 4400 is an acrylic polymer with significant higher molecular weight compared with the EFKA® polyurethane-based polymeric dispersants. This gives better deflocculation of organic pigments. 表示を減らす | |
| EFKA® PA 4401 | BASF Formulation Additives | EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from lo...もっと表示する EFKA® PA 4401 is a modified polyurethane for stabilizing inorganic and organic pigments with strong viscosity depressing properties. It improves gloss, reductions of flooding problems and higher color strength. This product is broadly compatible – from low- to high-polarity systems, including nitrocellulose. Care should be taken with EFKA® PA 4401 because of its tendency to yellowing and gelling when combined with chlorinated polymers. It also has a tendency to yellowing when combined with solvent-free epoxies. EFKA® PA 4401 is used for all kinds of high-quality solvent-based industrial coatings including automotive topcoats as well as pigment concentrates. 表示を減らす | |
| EFKA® PX 4320 | BASF Formulation Additives | EFKA® PX 4320 is a high-molecular-weight dispersing agent. It is is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA®...もっと表示する EFKA® PX 4320 is a high-molecular-weight dispersing agent. It is is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4320 is suitable for solvent-based industrial and automotive coatings. It also offers high efficiency in stabilizing pigments and demonstrates a wide compatibility with many resin systems. This makes EFKA® PX 4320 ideally suited for use of the concept of Resin-Free Pigment Concentrates (RFPC). 表示を減らす | |
| DISPEX® CX 4320 | BASF Formulation Additives | DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersi...もっと表示する DISPEX® CX 4320 is a particularly effective dispersing agent for dispersing inorganic fillers and pigments. It improves wet scrub and blocking resistance. It is a sodium salt of a carboxylic acid polymer in water and is particularly effective for dispersing inorganic fillers and pigments in high gloss, semi-gloss and highly filled interior paints. It also improves wet-scrub resistance, blocking resistance and has excellent ZnO-compatibility. 表示を減らす | |
| RHEOVIS® AS 1125 NA | BASF Formulation Additives | RHEOVIS® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic (low-shear) flow behavior. It is recommended for many aqueous paint and coating systems. It offers performance highlights such as excellent thickening efficiency, in...もっと表示する RHEOVIS® AS 1125 NA is an efficient acrylic thickener (ASE) with pronounced pseudoplastic (low-shear) flow behavior. It is recommended for many aqueous paint and coating systems. It offers performance highlights such as excellent thickening efficiency, increased KU-viscosity, prolonged open time, reduced sagging, high yield point, lower water uptake, and excellent viscosity stability after tinting. 表示を減らす | |
| EFKA® PX 4330 | BASF Formulation Additives | EFKA® PX 4330 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX...もっと表示する EFKA® PX 4330 is a high-molecular-weight dispersing agent. It is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. EFKA® PX 4330 is suitable for stabilizing pigments in solvent-based coatings. This product, due to the very wide compatibility in most current systems used in solvent-based coatings, is especially suitable for the production of Resin Minimal Pigment Concentrates (RMPC) in combination with a multi compatible dispersing resin. 表示を減らす | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...もっと表示する DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). 表示を減らす | |
| EFKA® PX 4310 | BASF Formulation Additives | EFKA® PX 4310 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. This product is suitable for industrial and automotive c...もっと表示する EFKA® PX 4310 is made by the Controlled Free Radical Polymerization (CFRP) technology, which allows producing polymeric dispersants with defined polymer architecture and a low poly-dispersity index. This product is suitable for industrial and automotive coatings. It offers high efficiency in stabilizing pigments and demonstrates a wide compatibility with many solvent-based resin systems. 表示を減らす | |
| EFKA® PU 4061 | BASF Formulation Additives | EFKA® PU 4061 a polymeric dispersant for stabilizing inorganic and organic pigments. This results in improved gloss and DOI, reduced flooding problems, higher color strength and lower viscosity. EFKA® PU 4061 is used in all types of solvent-based coatings...もっと表示する EFKA® PU 4061 a polymeric dispersant for stabilizing inorganic and organic pigments. This results in improved gloss and DOI, reduced flooding problems, higher color strength and lower viscosity. EFKA® PU 4061 is used in all types of solvent-based coatings, particularly high-quality industrial coatings such as automotive topcoats (OEM and refinish), coil coatings and 2-pack polyurethane coating systems. It is also suitable for use in pigment concentrates. 表示を減らす | |
| EFKA® SL 3031 | BASF Formulation Additives | EFKA® SL 3031 is a slip, leveling and antiblocking additive that is compatible with all medium to high-polarity solvent based systems. It improves mar-resistance, slip and smoothness, decreases the tendency to floating of pigments and the sensitivity to a...もっと表示する EFKA® SL 3031 is a slip, leveling and antiblocking additive that is compatible with all medium to high-polarity solvent based systems. It improves mar-resistance, slip and smoothness, decreases the tendency to floating of pigments and the sensitivity to air-draughts. EFKA® SL 3031 is compatible with all medium- to high-polarity solventbased systems. In unsaturated polyesters, e.g., UV-curable, EFKA® SL 3031 improves slip and smoothness of the surface with no influence on curtain stability when applied by curtain coating. The sensitivity to air drafts when sprayed or poured will be reduced by EFKA® SL 3031. This product also improves leveling and mar resistance and acts as an antiblocking agent. This is particularly advantageous in PUR systems based on hydroxyl acrylics. Due to its high surface activity, EFKA® SL 3031 can interfere with intercoat adhesion when recoated without sanding. If air is introduced by the application equipment, small amounts of defoamers such as EFKA® PB 2020 and EFKA® SI 2022 should be added. 表示を減らす | |
| EFKA® SL 3033 | BASF Formulation Additives | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...もっと表示する EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. 表示を減らす | |
| EFKA® FL 3778 | BASF Formulation Additives | EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and ai...もっと表示する EFKA® FL 3778 is an acrylic copolymer that improves leveling, prevents cratering, helps substrate wetting and does not interfere with intercoat adhesion. It is used for coil coatings, polyurethane coatings, stoving enamels, two-pack epoxy compounds and air-drying alkyd systems. 表示を減らす | |
| DISPEX® AA 4135 NA | BASF Formulation Additives | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| EFKA® SL 3288 | BASF Formulation Additives | EFKA® SL 3288 is an additive designed to improve slip, levelling, surface smoothness and ‘soft-touch’ effect in high gloss coatings. It has a minimal effect on foam stabilisation and intercoat adhesion. Due to its excellent compatibility properties, it is...もっと表示する EFKA® SL 3288 is an additive designed to improve slip, levelling, surface smoothness and ‘soft-touch’ effect in high gloss coatings. It has a minimal effect on foam stabilisation and intercoat adhesion. Due to its excellent compatibility properties, it is very suitable for use in high-gloss clear coatings without causing haze. EFKA® SL 3288 is recommended for all kinds of solvent-based high-gloss coatings, especially wood finishes. It is also suitable for water-based industrial coatings. 表示を減らす | |
| BASONAT® HW 1000 | BASF Dispersions & Resins | Basonat® HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. Basonat® HW 1000 is recommended for a...もっと表示する Basonat® HW 1000 is a solvent free water-emulsifiable polyfunctional isocyanate based on HDI for crosslinking polymeric dispersions. It is used as a crosslinker for polymeric dispersions containing reactive OH groups. Basonat® HW 1000 is recommended for applications such as: interior/exterior general industrial metal coating applications, interior/exterior plastic component coating applications, interior/exterior wood coatings for floor, furniture, or millwork applications, and interior/exterior Automotive OEM or refinish applications. 表示を減らす | |
| JONCRYL® 587 | BASF Dispersions & Resins | Joncryl® 587 is a solid flake acrylic polyol for conventional liquid polyurethane and powder coating applications. This product is recommended for industrial maintenance and automotive refinish 2K polyurethane applications and interior/exterior general me...もっと表示する Joncryl® 587 is a solid flake acrylic polyol for conventional liquid polyurethane and powder coating applications. This product is recommended for industrial maintenance and automotive refinish 2K polyurethane applications and interior/exterior general metal powder coating applications. It exhibits wide solvent selection latitude, exceptional appearance, excellent exterior durability and chemical resistance and excellent gloss and gloss retention. 表示を減らす | |
| JONCRYL® 804 | BASF Dispersions & Resins | Joncryl® 804 is a high equivalent weight, hydroxyl functional solid flake acrylic polyol for liquid polyurethane and industrial powder coating applications. This product is recommended for interior/exterior general metal powder coating applications, inter...もっと表示する Joncryl® 804 is a high equivalent weight, hydroxyl functional solid flake acrylic polyol for liquid polyurethane and industrial powder coating applications. This product is recommended for interior/exterior general metal powder coating applications, interior/exterior plastic component coating applications, exterior wood coatings for furniture applications, and automotive refinish applications. 表示を減らす | |
| ACRONAL® 4400 | BASF Dispersions & Resins | Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates, improved asphalt-bleed resistance, retention of film elasticity after weathering, and higher solar reflectivity due to enhanced dirt pick-up resistance. Further, Acronal® 4400 - when combined with BASF...もっと表示する Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates, improved asphalt-bleed resistance, retention of film elasticity after weathering, and higher solar reflectivity due to enhanced dirt pick-up resistance. Further, Acronal® 4400 - when combined with BASF’s Quick-Trigger 4333 additive - delivers early rain resistance under even the most challenging weather conditions. Acronal® 4400 was value engineered to provide environmental benefits in zinc-free roof coating formulations and comply with the performance parameters of ASTM D 6083 & California Title 24 protocols. 表示を減らす | |
| JONCRYL® 819 | BASF Dispersions & Resins | Joncryl® 819 is a carboxyl functional solid grade acrylic resin designed for powder coating applications. When reacted with a bis-phenol A epoxy to formulate a hybrid coating, the resultant film displays all of the flexibility characteristics associated w...もっと表示する Joncryl® 819 is a carboxyl functional solid grade acrylic resin designed for powder coating applications. When reacted with a bis-phenol A epoxy to formulate a hybrid coating, the resultant film displays all of the flexibility characteristics associated with more traditional polyester/epoxy hybrids with the additional advantages of superior QUV stability, excellent chemical resistance, and excellent hardness. Joncryl® 819 should be considered as a polyester replacement in hybrid systems where improvements in hardness, chemical resistance and UV resistance are desired. In addition, Joncryl® 819 epoxy hybrids produce excellent low gloss coatings (in combination with Joncryl® 848) that are frequently more economical than polyester or epoxy bases low gloss systems 表示を減らす | |
| JONCRYL® 1534 | BASF Dispersions & Resins | Joncryl® 1534 is an acrylic emulsion for maintenance and industrial coating applications. Offers excellent adhesion to a variety of substrates, humidity resistance and corrosion resistance. | |
| Baxxodur™ EC 110 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 110 is an aliphatic amine based fast curing agent with low viscosity. Applications include, epoxy grout in construction, epoxy coating in marine and maintenance, casting and encapsulation, composite lamination, intermediate for polyamide. | |
| Baxxodur™ EC 130 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 130 is a polyether amine based curing agent with low viscosity and high reactivity. Applications include, structural adhesive and composite lamination. | |
| Baxxodur™ EC 201 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty ...もっと表示する Baxxodur™ EC 201 is a cycloaliphatic amine based curing agent with low viscosity and moderate reactivity. Applications include, structural adhesive, flooring, grout, coating in construction, composite lamination, casting and encapsulation, and heavy duty protective coating. 表示を減らす | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | Baxxodur™ EC 252 is a cycloaliphatic amine based curing agent with very low viscosity and moderate reactivity. Applications include structural adhesive, heavy duty epoxy coating, composite lamination, casting and encapsulation, epoxy prepreg. | |
| Baxxodur™ EC 301 | BASF Corporation, Chemical Intermediates | Baxxodur™ 301 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, structural adhesive, construction, composite lamination casting and encapsulation, decorative and protective coating. | |
| Baxxodur™ EC 302 | BASF Corporation, Chemical Intermediates | Baxxodur™ 302 is a polyether amine based curing agent with low viscosity and long pot life. Applications include, composite, structural adhesive and epoxy toughener. | |
| Capromer™ PD1–10 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...もっと表示する Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. 表示を減らす | |
| Capromer™ PD1–20 | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...もっと表示する Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate 表示を減らす | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF Corporation, Chemical Intermediates | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...もっと表示する Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. 表示を減らす | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF Corporation, Chemical Intermediates | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...もっと表示する Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates 表示を減らす | |
| Capromer™ PD1–10 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...もっと表示する Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. 表示を減らす | |
| Capromer™ PD1–20 A | BASF Corporation, Chemical Intermediates | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...もっと表示する Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. 表示を減らす | |
| 1,4-Butanediol, BDO | BASF Corporation, Chemical Intermediates | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...もっと表示する 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. 表示を減らす | |
| 1,5-Pentanediol, PDO | BASF Corporation, Chemical Intermediates | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...もっと表示する 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. 表示を減らす | |
| NPG, Neol® Neopentylglycol | BASF Corporation, Chemical Intermediates | NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for p...もっと表示する NPG, Neol® Neopentylglycol is a versatile building block for polyesters for solvent-borne paints. It is used in stoving enamels for automotive coatings, can and coil-coatings and for general industry applications. It is used for two-component paints for plastic coatings and for repair coatings. Neopentyl-glycol is used for water borne polyesters for automotive coatings, repair coatings and coatings for general industry. It is also used for polyesters for powder coatings. Neopentylglycol shows high reactivity for esterification and trans-esterification. Neopentylglycol introduces solubility and compatibility into polyester molecules, avoiding crystallinity. NNeopentylglycol offers high chemical, thermal and UV resistance. Polyesters show good hardness and excellent weather resistance. 表示を減らす | |
| 1,6-Hexanediol HDO® | BASF Corporation, Chemical Intermediates | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...もっと表示する 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. 表示を減らす | |
| Hydroxypivalic acid neopentylglycolester, HPN | BASF Corporation, Chemical Intermediates | Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, co...もっと表示する Hydroxypivalic acid neopentylglycolester, HPN is a building block for saturated polyesters, unsaturated polyesters and polyurethanes. HPN is suitable for polyesters for solvent-borne paints (stoving enamels for can-& coil-coating, automotive coatings, coatings for industrial applications) and for two-component paints (plastic coatings, repair coatings). HPN polyesters are used preferentially used for waterborne paints, but also suitable for polyesters in powder coatings. HPN shows high reactivity for esterification and trans-esterification. HPN introduces optimal solubility and compatibility in polyester molecules and suppress crystallinity effectively. HPN improves the hydrolytical resistance of polyester molecules, particularly in waterborne coating 表示を減らす | |
| TMP (Hydro)® Trimethylol-propane | BASF Corporation, Chemical Intermediates | TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different typ...もっと表示する TMP (Hydro)® Trimethylol-propane building block for alkyd resins, saturated & unsaturated polyesters, poly-urethanes, additive for waterborne paints and as backbone molecule for alkoxylation. Trimethylolpropane is the most common polyol for different types of alkyds and branched polyesters, it is easily esterified or transest. Alkyds and polyesters based on trimethylol-propane are suitable for solventborne paints (stoving enamels, two-component paints, can- & coil coating) and for waterborne paints. 表示を減らす | |
| Formic acid | BASF Corporation, Chemical Intermediates | Formic acid is an additive for coatings and a neutralization agent (i.e. cationic electro deposition paints). Formic acid is used in resin production for CED-resins. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF Corporation, Chemical Intermediates | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...もっと表示する 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. 表示を減らす | |
| epsilon-Caprolactone, CLO | BASF Corporation, Chemical Intermediates | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...もっと表示する Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. 表示を減らす | |
| Iso-Butyl vinyl ether, IBVE | BASF Corporation, Chemical Intermediates | Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as...もっと表示する Iso-Butyl vinyl ether, IBVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. 表示を減らす | |
| tert.-Butylvinylether, t-BVE | BASF Corporation, Chemical Intermediates | Tert.-Butylvinylether, t-BVE monomer for copolymers with vinyl chlorides. T-Butyl vinyl groups in polymers can be easily transferred in hydroxyl function (protective group). Copolymers with t-Butyl vinyl ether are used for solvent based anti-corrosion co...もっと表示する Tert.-Butylvinylether, t-BVE monomer for copolymers with vinyl chlorides. T-Butyl vinyl groups in polymers can be easily transferred in hydroxyl function (protective group). Copolymers with t-Butyl vinyl ether are used for solvent based anti-corrosion coating. 表示を減らす | |
| Cyclohexyl vinyl ether, CHVE | BASF Corporation, Chemical Intermediates | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...もっと表示する Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. 表示を減らす | |
| 2-Ethylhexylvinylether, EHVE | BASF Corporation, Chemical Intermediates | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...もっと表示する 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. 表示を減らす | |
| N-Dodecyl vinyl ether, DDVE | BASF Corporation, Chemical Intermediates | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy si...もっと表示する N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. 表示を減らす | |
| N-Octadecyl vinyl ether, ODVE | BASF Corporation, Chemical Intermediates | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...もっと表示する N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. 表示を減らす | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF Corporation, Chemical Intermediates | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...もっと表示する 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. 表示を減らす | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...もっと表示する 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. 表示を減らす | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF Corporation, Chemical Intermediates | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...もっと表示する Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . 表示を減らす | |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF Corporation, Chemical Intermediates | Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based se...もっと表示する Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase. Triethylenglycol divinyl ether is used for UV-coatings (wood, printing inks) and UV adhesives. 表示を減らす | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF Corporation, Chemical Intermediates | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1-Vinylimidazole, VIM | BASF Corporation, Chemical Intermediates | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...もっと表示する 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. 表示を減らす | |
| N-Vinylpyrrolidone, NVP | BASF Corporation, Chemical Intermediates | N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a react...もっと表示する N-Vinylpyrrolidone, NVP is a reactive diluent for radiation curing in UV coatings, UV inks and UV adhesives. N-Vinylpyrrolidone, NVP is a monomer for water soluble Polyvinylpyrrolidones (PVP) with uses in oil-field, cosmeticsand adhesives. It is a reactive diluent in UV coatings, UV inks and UV adhesives. 表示を減らす | |
| N-Vinyl-Caprolactam, NVC | BASF Corporation, Chemical Intermediates | N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototypin...もっと表示する N-Vinyl-Ccaprolactam, NVC is a reactive diluent for UV adhesives and UV inks, especially screen & digital printing inks / ink jet printing inks. It is a reactive diluent for industrial UV coatings, especially in optical fiber coatings and rapid prototyping. N-Vinylcaprolactame, is a co-monomer for hydrophobic modified PVP (Polyvinylpyrrolidone) especially used in oilfield, cosmetics and adhesives. 表示を減らす | |
| Liquid NVC | BASF Corporation, Chemical Intermediates | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| 1,3-Diaminopropane | BASF Corporation, Chemical Intermediates | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| Neopentane diamine | BASF Corporation, Chemical Intermediates | Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with ep...もっと表示する Neopentane Diamine is a cross linker for epoxy resins, building block for polyamides. Neopentane diamine is frequently used in epoxy coatings as well as in epoxy composites and adhesives. Neopentane diamine is highly reactive and readily mixable with epoxy resins. Due to its structure, it is less water-sensitive compared to non-branched aliphatic amines. 表示を減らす | |
| Isophorone diamine | BASF Corporation, Chemical Intermediates | Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivit...もっと表示する Isophorone diamine is a cross linker for epoxy resins, building block for polyamides. Isophorone diamine is used in epoxy coatings, epoxy adhesives and epoxy composites. Isophorone diamine improves the hydrophobicity of epoxy resins with less sensitivity against humidity while film formation. 表示を減らす | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF Corporation, Chemical Intermediates | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...もっと表示する 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. 表示を減らす | |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF Corporation, Chemical Intermediates | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...もっと表示する 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. 表示を減らす | |
| 3-(Cyclohexylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...もっと表示する 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. 表示を減らす | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF Corporation, Chemical Intermediates | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...もっと表示する 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. 表示を減らす | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF Corporation, Chemical Intermediates | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...もっと表示する 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. 表示を減らす | |
| N,N-BIS(3-Aminopropyl)-methylamine | BASF Corporation, Chemical Intermediates | N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized...もっと表示する N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized polyurethane dispersions. 表示を減らす | |
| N-Methylethanolamine | BASF Corporation, Chemical Intermediates | N-Methylethanolamine is a building block for the modification of epoxy resins. Methylethanolamine modified epoxy resins are suited for cationic electro deposition coatings. | |
| Diethanolamine, pure | BASF Corporation, Chemical Intermediates | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3-(Dimethylamino) propylamine | BASF Corporation, Chemical Intermediates | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Benzylamine | BASF Corporation, Chemical Intermediates | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| 4,4'-Methylenedianiline, MDA | BASF Corporation, Chemical Intermediates | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...もっと表示する 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. 表示を減らす | |
| N,N-Diisopropanol-P-toluidine | BASF Corporation, Chemical Intermediates | N,N-Diisopropanol-P-toluidine is an accelerator for radical initiated polymerization of unsaturated polyesters, Catalyst for epoxy reactions. Coatings technology for composite production. | |
| N,N-DI-(2-hydroxyethyl) aniline | BASF Corporation, Chemical Intermediates | N,N-DI-(2-hydroxyethyl) aniline is an accelerator for radical initiated polymerization of unsaturated polyesters. Catalyst for epoxy reactions. | |
| Imidazole | BASF Corporation, Chemical Intermediates | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...もっと表示する Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. 表示を減らす |
