| AVANSE™ MV-100 | Univar Solutions | AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field ...もっと表示する AVANSE™ MV-100 is an ambient temperature self-crosslinking acrylic emulsion which can be formulated into corrosion-resistant primers, highly durable topcoats, and high gloss, direct-to-metal (DTM) finish coats. Applications include both factory and field applied finishes for metal, concrete and masonry substrates. It has the ability to be formulated into high performance coating at or below 100 g/L of volatile organic content (VOC). 表示を減らす | Request Sample |
| AVANSE™ ST-410 | Univar Solutions | AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy m...もっと表示する AVANSE™ ST-410 is a 100% acrylic water borne emulsion, formulated to meet the toughest VOC standards and still outperform traditional solvent and water borne semitransparent stain technologies. It is easy to apply and doesn't require coalescent or heavy metal driers to enhance the long lasting appearance of new or weathered wood. It's morphology and unique particle stabilization maximize the flow and lapping characteristics during application while building early resistance properties upon drying. 表示を減らす | Request Sample |
| EMULSION E-2353 | Univar Solutions | EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and top...もっと表示する EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications. 表示を減らす | Request Sample |
| JONCRYL® 100 | BASF Dispersions & Resins | Joncryl® 100 is a low VOC acrylic colloidal solution designed as a sole vehicle for black envelope inks. It is also effective at reducing paper curl and enhancing resolubility when used as a letdown in paper ink formulations. | |
| JONCRYL® 142 | BASF Dispersions & Resins | General purpose, acrylic colloidal emulsion designed as a sole vehicle for carbon black inks. It is also recommended as a letdown vehicle for organic colors. | |
| JONCRYL® 1612 | BASF Dispersions & Resins | Joncryl® 1612 is a high gloss, hard film forming, Rheology Controlled (RC) acrylic emulsion for printing ink and overprint varnish applications. | |
| JONCRYL® 1616 | BASF Dispersions & Resins | Joncryl® 1616 is a high gloss, hard film forming acrylic emulsion that, when used as a letdown vehicle in inks for paper and paperboard applications, offers excellent transfer and printability with low foaming in flexo and gravure inks and overprint varni...もっと表示する Joncryl® 1616 is a high gloss, hard film forming acrylic emulsion that, when used as a letdown vehicle in inks for paper and paperboard applications, offers excellent transfer and printability with low foaming in flexo and gravure inks and overprint varnishes. Strong, high gloss inks with very good viscosity stability can be formulated using Joncryl® 1616. 表示を減らす | |
| JONCRYL® 1619 | BASF Dispersions & Resins | Joncryl® 1619 is hard film forming Rheology Controlled (RC) acrylic emulsion for printing ink and overprint varnish applications. | |
| JONCRYL® 1655 | BASF Dispersions & Resins | Sodium neutralized, non film forming acrylic emulsion developed for use in inks and overprint varnishes requiring no ammonia odor and exceptional on press stability. | |
| JONCRYL® 1670 | BASF Dispersions & Resins | Soft film forming acrylic emulsion that provides film formation, excellent rub resistance, water and grease resistance to ink and overprint varnish formulations. | |
| JONCRYL® 1680 | BASF Dispersions & Resins | A controlled particle size RC emulsion designed to give a matte appearance to overprint varnishes and inks. | |
| JONCRYL® 1685-A | BASF Dispersions & Resins | Joncryl® 1685-A is designed for excellent heat resistance in water-based overprint varnishes and inks providing excellent adhesion to a variety of substrates while also providing good block resistance. | |
| JONCRYL® 1695 | BASF Dispersions & Resins | Soft film forming styrene acrylic emulsion with no added zinc or other metallic cross linkers designed for high heat resistance applications. | |
| JONCRYL® 1698 | BASF Dispersions & Resins | Joncryl® 1698 is a Rheology Controlled (RC) acrylic emulsion for paper and paperboard inks. | |
| JONCRYL® 2090 | BASF Dispersions & Resins | Joncryl® 2090 is a Rheology Controlled (RC) acrylic emulsion for paper and paperboard inks. | |
| JONCRYL® 2121 | BASF Dispersions & Resins | Joncryl® 2121 is a fast drying, high solids, non-film forming acrylic emulsion that provides viscosity stability, rub resistance and printability in flexographic and gravure inks for paper and paperboard applications. | |
| JONCRYL® 2136-A | BASF Dispersions & Resins | Joncryl® 2136-A is a Rheology Controlled (RC) emulsion for use with metallic pigments when formulating viscosity-stable, tarnish-resistant metallic inks. It offers excellent printability and resolubility, good adhesion to film substrates, and viscosity-st...もっと表示する Joncryl® 2136-A is a Rheology Controlled (RC) emulsion for use with metallic pigments when formulating viscosity-stable, tarnish-resistant metallic inks. It offers excellent printability and resolubility, good adhesion to film substrates, and viscosity-stable metallic inks. This product is recommended for printing inks and functional packaging coatings applications. 表示を減らす | |
| JONCRYL® 2153 | BASF Dispersions & Resins | Joncryl® 2153 is a hard non film forming acrylic emulsion designed to provide excellent stability and drying speed in ink formulations for paper and paperboard. | |
| JONCRYL® 2156 | BASF Dispersions & Resins | Joncryl® 2156 is a high solid, fast drying, non-film forming Rheology Controlled (RC) emulsion for printing ink applications. | |
| JONCRYL® 2350 | BASF Dispersions & Resins | Joncryl® 2350 is a Rheology Controlled (RC) acrylic emulsion for printing ink and overprint varnish applications. | |
| JONCRYL® 2640 | BASF Dispersions & Resins | Joncryl® 2640 is a high gloss, Rheology Controlled (RC) acrylic emulsion for printing ink applications. | |
| JONCRYL® 2646 | BASF Dispersions & Resins | Joncryl® 2646 is a high gloss, Rheology Controlled (RC) acrylic emulsion for high density polyethylene (HDPE) film ink applications. | |
| JONCRYL® 2660 | BASF Dispersions & Resins | Joncryl® 2660 is a Rheology Controlled (RC) acrylic emulsion for high gloss, transparent polyethylene film and foil ink applications. | |
| JONCRYL® 2664 | BASF Dispersions & Resins | Joncryl® 2664 is a film forming, Rheology Controlled (RC) acrylic emulsion for printing ink applications. | |
| JONCRYL® 537 | BASF Dispersions & Resins | Non film forming acrylic emulsion that can be coalesced to form an alkali and detergent-resistant film for inks or coatings. | |
| JONCRYL® 538-A | BASF Dispersions & Resins | It is a Rheology Controlled (RC), nonfilm forming, acrylic polymer that can be coalesced to form an alcohol and chemical resistant film for inks and coatings. The hardness of the polymer allows it to resist plasticizer migration on printed vinyl. | |
| JONCRYL® 585 | BASF Dispersions & Resins | Film forming acrylic emulsion that exhibits excellent heat resistance characteristics along with high gloss. | |
| JONCRYL® 617-A | BASF Dispersions & Resins | Medium range, film forming acrylic emulsion for ink and overprint varnish formulations. | |
| JONCRYL® 624 | BASF Dispersions & Resins | Joncryl® 624 is a general purpose, soft film forming Rheology Controlled (RC) acrylic polymer emulsion for use in water-based flexo and gravure inks on flexible films and foil. It is a versatile film forming emulsion that has good adhesion to a broad rang...もっと表示する Joncryl® 624 is a general purpose, soft film forming Rheology Controlled (RC) acrylic polymer emulsion for use in water-based flexo and gravure inks on flexible films and foil. It is a versatile film forming emulsion that has good adhesion to a broad range of polyolefin films. 表示を減らす | |
| JONCRYL® 631 | BASF Dispersions & Resins | Hard non film forming styrene acrylic emulsion designed to hide the brown background of natural kraft substrates. It allows for the reduction of the level of pigment as well as inorganic extenders. | |
| JONCRYL® 646 | BASF Dispersions & Resins | High molecular weight acrylic colloidal emulsion designed to minimize the cost of inks for corrugated board. The balance between the molecular weight and the composition results in the ability to maintain viscosity with a minimal amount of polymer. | |
| JONCRYL® 652-A | BASF Dispersions & Resins | Joncryl® 652-A is an emulsion of a specialty resin developed for water-based inks and overprint varnishes. Benefits include a very hard resin, rapid resolubility, hydrophilic nature of the polymer, and can be used as a main or modifying resin. | |
| JONCRYL® 655 | BASF Dispersions & Resins | Low molecular weight, acrylic colloidal emulsion designed as a sole vehicle in carbon black inks for paper, paperboard and corrugated substrates. It is also recommended as a letdown vehicle for organic colors. | |
| JONCRYL® 659-A | BASF Dispersions & Resins | Joncryl® 659-A is an acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications. It provides good transfer and printability at low polymer solids. | |
| JONCRYL® 660 DPM | BASF Dispersions & Resins | Joncryl® 660 DPM is a hot mar-resistant, Rheology Controlled (RC) acrylic emulsion for pre-print corrugated overprint applications. | |
| JONCRYL® 74-A | BASF Dispersions & Resins | Joncryl® 74-A is a soft film forming, RC acrylic emulsion that provides film formation and excellent rub, water, and grease resistance to ink, overprint varnish, and functional packaging coating formulations. Additionally, this product allows the manufact...もっと表示する Joncryl® 74-A is a soft film forming, RC acrylic emulsion that provides film formation and excellent rub, water, and grease resistance to ink, overprint varnish, and functional packaging coating formulations. Additionally, this product allows the manufacture of high slide angle coatings for folding carton and multi-wall bag applications. 表示を減らす | |
| JONCRYL® 750 | BASF Dispersions & Resins | Joncryl® 750 is a film forming, self thickening, acrylic emulsion for heat seal coatings on paper and paperboard. Neutralization of the emulsion with a fugitive base is required to provide optimal rheological and film forming properties to heat seal coati...もっと表示する Joncryl® 750 is a film forming, self thickening, acrylic emulsion for heat seal coatings on paper and paperboard. Neutralization of the emulsion with a fugitive base is required to provide optimal rheological and film forming properties to heat seal coatings. 表示を減らす | |
| JONCRYL® 77 | BASF Dispersions & Resins | Joncryl® 77 is a hard film forming acrylic emulsion that provides film integrity and printability to ink and overprint varnish formulations. Additionally it provides gloss, transparency, block resistance, rub resistance and water resistance. | |
| JONCRYL® 80 | BASF Dispersions & Resins | Joncryl® 80 is a general purpose, Rheology Controlled (RC) acrylic emulsion for functional packaging coating applications. | |
| JONCRYL® 82 | BASF Dispersions & Resins | Joncryl® 82 is an ultra low VOC, styrene-free acrylic emulsion for functional packaging coating applications. | |
| JONCRYL® 89 | BASF Dispersions & Resins | Joncryl® 89 is a general purpose, non film forming styrenated acrylic emulsion that provides gloss & clarity, block resistance and fast drying properties to overprint varnish formulations. | |
| JONCRYL® DFC 3030 | BASF Dispersions & Resins | Joncryl® DFC 3030 is a soft film forming acrylic emulsion that provides flexibility, film formation, and water resistance to ink and overprint varnish formulations for direct food contact applications. | |
| JONCRYL® DFC 3040 | BASF Dispersions & Resins | Joncryl® DFC 3040 is a hard film forming acrylic emulsion that provides rub and block resistance to overprint varnish and ink formulations for direct food contact applications. | |
| JONCRYL® DFC 3050 | BASF Dispersions & Resins | Joncryl® DFC 3050 is a non-film forming acrylic emulsion that provides fast dry and block resistance to ink and overprint varnish formulations for direct food contact applications. | |
| JONCRYL® ECO 2124 | BASF Dispersions & Resins | Joncryl® ECO 2124 is translucent very soft, glycol ether-free emulsion for film printing inks featuring good adhesion, flexibility, ultra low VOC, HAPS free, and low odor. | |
| JONCRYL® ECO 2177 | BASF Dispersions & Resins | Joncryl® ECO 2177 is a hard film forming acrylic emulsion that is glycol ether free and is ultra low VOC. It provides adhesion, rub resistance, and block resistance to ink and overprint varnish formulations. | |
| JONCRYL® ECO 2189 | BASF Dispersions & Resins | Joncryl® ECO 2189 is a hard non film forming RC styrene acrylic emulsion that is glycol ether free and ultra low VOC. It provides fast drying, gloss and holdout in flexo and gravure formulations for paper and paperboard inks and overprint varnishes. | |
| JONCRYL® FLX 5000-A | BASF Dispersions & Resins | Joncryl® FLX 5000-A is a self-crosslinking RC acrylic emulsion that has excellent resistance and resolubility for use in inks for bread bags, frozen food bags, and heavy duty bags. Inks based on Joncryl® FLX 5000-A are a cost-effective alternative to solv...もっと表示する Joncryl® FLX 5000-A is a self-crosslinking RC acrylic emulsion that has excellent resistance and resolubility for use in inks for bread bags, frozen food bags, and heavy duty bags. Inks based on Joncryl® FLX 5000-A are a cost-effective alternative to solvent-based inks. 表示を減らす | |
| JONCRYL® FLX 5026-A | BASF Dispersions & Resins | Joncryl® FLX 5026-A is a self-crosslinking acrylic emulsion with good resolubility for water based inks used for surface printing on polyethylene and polypropylene substrates. It was developed for surface print white inks on OPP substrates. In a formulate...もっと表示する Joncryl® FLX 5026-A is a self-crosslinking acrylic emulsion with good resolubility for water based inks used for surface printing on polyethylene and polypropylene substrates. It was developed for surface print white inks on OPP substrates. In a formulated white ink, Joncryl® FLX 5026-A offers the required physical properties such as high heat resistance, very good scratch and crinkle resistance, high opacity and high gloss. 表示を減らす | |
| JONCRYL® HPB 1702 | BASF Dispersions & Resins | JONCRYL® HPB 1702 is an easy-maintenance modified acrylic emulsion designed to provide grease resistance when applied to paper and board packaging. JONCRYL HPB 1702 provides excellent grease resistance at room temperature and up to 60 °C both in flat pack...もっと表示する JONCRYL® HPB 1702 is an easy-maintenance modified acrylic emulsion designed to provide grease resistance when applied to paper and board packaging. JONCRYL HPB 1702 provides excellent grease resistance at room temperature and up to 60 °C both in flat packaging and after folding/creasing. 表示を減らす | |
| JONCRYL® HPB 4010 | BASF Dispersions & Resins | Joncryl® HPB 4010 is a primer designed for use with Joncryl® HPB 4030 topcoat binder, to achieve a highly water resistant, heat sealable coating for replacing extruded wax or polyethylene coatings on paper substrates for cups, boxes, and other types of fo...もっと表示する Joncryl® HPB 4010 is a primer designed for use with Joncryl® HPB 4030 topcoat binder, to achieve a highly water resistant, heat sealable coating for replacing extruded wax or polyethylene coatings on paper substrates for cups, boxes, and other types of food packaging. 表示を減らす | |
| JONCRYL® HPB 4020 | BASF Dispersions & Resins | Joncryl® HPB 4020 is a water resistant, heat sealable binder for replacing extruded wax or polyethylene coatings on paper substrates for cups, boxes, and other types of food packaging. | |
| JONCRYL® HPB 4030 | BASF Dispersions & Resins | Joncryl® HPB 4030 is a water resistant, heat sealable binder for replacing extruded wax or polyethylene coatings on paper substrates for cups, boxes, and other types of food packaging. | |
| JONCRYL® HR 1620 | BASF Dispersions & Resins | Joncryl® HR 1620 is a film forming acrylic emulsion that imparts maximum heat release and water resistance to ink and overprint varnish formulations. | |
| JONCRYL® HRC 1661 | BASF Dispersions & Resins | Joncryl® HRC 1661 is a hybrid, film forming, Rheology Controlled (RC) acrylic emulsion for overprint varnish and functional packaging coating applications. | |
| JONCRYL® HSL 9010 | BASF Dispersions & Resins | Joncryl® HSL 9010 is an acrylic copolymer emulsion for use in waterbased heat seal lacquers for cardboard blister packs and flexible packaging. It offers good bond strength at low sealing temperatures. Due to the low activation temperature, it allows shor...もっと表示する Joncryl® HSL 9010 is an acrylic copolymer emulsion for use in waterbased heat seal lacquers for cardboard blister packs and flexible packaging. It offers good bond strength at low sealing temperatures. Due to the low activation temperature, it allows shorter dwell times on the sealing equipment, which can result in improving the throughput of blister packaging lines of 20-50%. 表示を減らす | |
| JONCRYL® HSL 9011 | BASF Dispersions & Resins | Joncryl® HSL 9011 is the latest resin innovation for functional packaging coatings specifically developed for the reduction of heat-seal activation temperature. Joncryl® HSL 9011 allows the formulation of heat-seal lacquers for carton board blisters for h...もっと表示する Joncryl® HSL 9011 is the latest resin innovation for functional packaging coatings specifically developed for the reduction of heat-seal activation temperature. Joncryl® HSL 9011 allows the formulation of heat-seal lacquers for carton board blisters for high-speed packaging machines. Also, it can be used on cardboard blisters for sensitive applications, such as baby pacifiers and toothbrushes. 表示を減らす | |
| JONCRYL® HSL 9012 | BASF Dispersions & Resins | Joncryl® HSL 9012 is an acrylic copolymer emulsion for use in waterbased heat seal lacquers for pharmaceutical blister lidding foil sealed against PVC, PVDC-coated PVC and PET. | |
| JONCRYL® LMV 7014 | BASF Dispersions & Resins | Joncryl® LMV 7014 is a low maintenance vehicle, pH-stable acrylic colloidal emulsion for pigment dispersions in printing ink applications. | |
| JONCRYL® LMV 7031 | BASF Dispersions & Resins | Joncryl® LMV 7031 is a film forming, low maintenance, pH stable acrylic emulsion for use in inks for film and foil applications. It has very good water resistance and adhesion to polyethylene, polypropylene and other non-porous substrates. | |
| JONCRYL® LMV 7034 | BASF Dispersions & Resins | Joncryl® LMV 7034 is a low maintenance vehicle, pH-stable, Rheology Controlled (RC) acrylic emulsion for printing ink applications. | |
| JONCRYL® LMV 7040 | BASF Dispersions & Resins | Joncryl® LMV 7040 is a hard film forming, low maintenance, pH stable acrylic emulsion that provides film integrity, adhesion and rub resistance to ink formulations for paper, paperboard, and primed foil substrates. | |
| JONCRYL® LMV 7050 | BASF Dispersions & Resins | Joncryl® LMV 7050 is a low maintenance, pH stable, non film forming acrylic emulsion that provides fast dry and excellent resolubility in ink formulations for paper and paperboard substrates. | |
| JONCRYL® LMV 7051 | BASF Dispersions & Resins | Joncryl® LMV 7051 is a non film forming, low maintenance, pH stable acrylic emulsion that provides gloss and holdout in ink formulations for paper and paperboard substrates. | |
| MAINCOTE™ 4950 | Univar Solutions | MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosi...もっと表示する MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosion resistance, and ease of formulation with excellent paint stability. It also offers good architectural gloss and trim paint properties. 表示を減らす | Request Sample |
| MAINCOTE™ AE-58 | Univar Solutions | MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for g...もっと表示する MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for general-purpose acrylic/epoxy paints which can be used on a variety of substrates such as exterior and interior metal and concrete. Property benefits include a long pot-life, low-temperature property response, and improved durability. 表示を減らす | Request Sample |
| MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...もっと表示する MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. 表示を減らす | Request Sample |
| MAINCOTE™ HG-56 | Univar Solutions | MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with imp...もっと表示する MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with improved stability. 表示を減らす | Request Sample |
| MAINCOTE™ PR-15 | Univar Solutions | MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be ...もっと表示する MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be formulated into high-quality OEM and general industrial topcoat finishes for steel substrates treated with zinc or iron phosphate. 表示を減らす | Request Sample |
| MAINCOTE™ PR-71 | Univar Solutions | MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. T...もっと表示する MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer. 表示を減らす | Request Sample |
| Ottopol 1320 | Gellner Industrial, LLC | Ottopol 1320 is a medium hard, tough, all anionic acrylic emulsion with outstanding chemical, abrasion and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. | |
| Ottopol 1450 | Gellner Industrial, LLC | Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blen...もっと表示する Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blends. 表示を減らす | |
| Ottopol 151 | Gellner Industrial, LLC | Ottopol 151 is an anionic acrylic emulsion. | |
| Ottopol 1960 | Gellner Industrial, LLC | Ottopol 1960 anionic acrylic emulsion is a high solids binder suitable for high performance sealants, patching compounds and contact adhesives as well as coating formulations. | |
| Ottopol 25-50E | Gellner Industrial, LLC | Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic ink...もっと表示する Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. 表示を減らす | |
| Ottopol 300 | Gellner Industrial, LLC | Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acry...もっと表示する Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acrylic polymers. 表示を減らす | |
| Ottopol 503 | Gellner Industrial, LLC | Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coat...もっと表示する Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coating. 表示を減らす | |
| Ottopol K-23 | Gellner Industrial, LLC | Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion character...もっと表示する Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion characteristics provide higher solids and better gloss. Positive charge allows inks and coatings made with Ottopol K-23 to have exceptionally good adhesion to plastic films such as polyethylene, PVC, polyester, and polystyrene. 表示を減らす | |
| Ottopol K-65 | Gellner Industrial, LLC | Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...もっと表示する Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-65 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. 表示を減らす | |
| Ottopol K-66 | Gellner Industrial, LLC | Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...もっと表示する Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-66 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. 表示を減らす | |
| Ottopol M-49 | Gellner Industrial, LLC | Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA doe...もっと表示する Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA does not promote the tarnishing of metallic pigments. The product has been proven to provide good aging stability and compatibility with additives and other resin systems. 表示を減らす | |
| Ottopol S-100 | Gellner Industrial, LLC | Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and ...もっと表示する Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin provides non-curling properties on paper. 表示を減らす | |
| Ottopol S-30 | Gellner Industrial, LLC | Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gr...もっと表示する Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. 表示を減らす | |
| Ottopol S-50 | Gellner Industrial, LLC | Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gr...もっと表示する Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. 表示を減らす | |
| Ottopol S-75 | Gellner Industrial, LLC | Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gr...もっと表示する Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. 表示を減らす | |
| Ottopol SF 49 | Gellner Industrial, LLC | Ottopol SF 49 is a self crosslinking acrylic emulsion that has outstanding water resistance and will not blush even after prolonged exposure to water. It can be formulated into a corrosion resistant primer or semi-gloss paint. | |
| Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
| Ottopol SX-100 | Gellner Industrial, LLC | Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using...もっと表示する Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require a hard film. Due to the internally cross-linking mechanism, Ottopol SX-100's block and scuff resistance is improved over conventional vehicles. It also provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of this product provides a high gloss finish and non-curling properties on paper. 表示を減らす | |
| Ottopol SX-30 | Gellner Industrial, LLC | Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...もっと表示する Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-30 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. The resin provides non-curling properties on paper. 表示を減らす | |
| Ottopol SX-50 | Gellner Industrial, LLC | Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...もっと表示する Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-50 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-50's block and scuff resistance is improved over conventional vehicles. 表示を減らす | |
| Ottopol SX-75 | Gellner Industrial, LLC | Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...もっと表示する Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-75 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-75's block and scuff resistance is improved over conventional vehicles. 表示を減らす | |
| RHOPLEX™ 52 | Univar Solutions | RHOPLEX™ 52 is a styrene-acrylic emulsion designed to be employed in stain blocking interior and exterior primers. It provides excellent tannin and marker stain blocking in zinc oxide free and zinc oxide containing formulations. It has excellent sandabili...もっと表示する RHOPLEX™ 52 is a styrene-acrylic emulsion designed to be employed in stain blocking interior and exterior primers. It provides excellent tannin and marker stain blocking in zinc oxide free and zinc oxide containing formulations. It has excellent sandability allowing formulated primers to be quickly topcoated. It has excellent alkaki resistance minimizing efflorescence and good adhesion to a variety of substrates including alkyds, wood, masonry, aluminum and steel. It also has very good enamel holdout properties.RHOPLEX™ 52 can be coalesced with non-volatile plasticisers to formulate primers with <5g/l VOC and is made APEO-free(1). 表示を減らす | Request Sample |
| RHOPLEX™ 585 | Univar Solutions | RHOPLEX™ 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The lo...もっと表示する RHOPLEX™ 585 is a 100% acrylic binder designed for premium exterior performance in flat and satin Architectural Coatings. It is supplied at high solids for formulation flexibility and does not contain any APEO (alkyl phenol ethoxylate) surfactants. The low coalescent demand of RHOPLEX™TM 585 allows the formulator to meet the 50g/VOC regulations while still maintaining some freeze thaw stability. Due to its 100% acrylic composition, RHOPLEX™TM 585 offers good exterior durability. 表示を減らす | Request Sample |
| RHOPLEX™ AC-1034 | Univar Solutions | RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high leve...もっと表示する RHOPLEX™ AC-1034 is a styrenated acrylic copolymer with a distinct composition that imparts excellent water resistance as well as a good degree of flexibility. It is designed for use in edgesealer products and offers very good compatibility with high levels of waxes and fillers, which are often used in such products. RHOPLEX™ AC-1034 can also be used as a clear primer or sealer coat to provide water resistance. 表示を減らす | Request Sample |
| RHOPLEX™ AC-2235M | Univar Solutions | RHOPLEX™ AC-2235M is a 100% acrylic binder provides a high degree of adhesion, durability, film build, flow and leveling. It is designed for use in exterior flat and sheen latex housepaints. | Request Sample |
| RHOPLEX™ AC-2508 | Univar Solutions | RHOPLEX™ AC-2508 is a 100% acrylic binder designed for exterior semigloss house and trim paints. | Request Sample |
| RHOPLEX™ AC-261 LF | Univar Solutions | RHOPLEX™ AC-261 LF is an all-acrylic emulsion polymer for latex floor paints. Its adhesion and abrasion resistance have been designed for this application. It is also suitable for quality exterior semi-gloss trim paints. | Request Sample |
| RHOPLEX™ AC-264 | Univar Solutions | RHOPLEX™ AC-264 is a unique high solids, 100%-acrylic emulsion vehicle for exterior latex paints which provides a high level of adhesion to chalky substrates. It provides the excellent general durability associated with all-acrylic binders designed for ex...もっと表示する RHOPLEX™ AC-264 is a unique high solids, 100%-acrylic emulsion vehicle for exterior latex paints which provides a high level of adhesion to chalky substrates. It provides the excellent general durability associated with all-acrylic binders designed for exterior paints. 表示を減らす | Request Sample |
| RHOPLEX™ AC-337N | Univar Solutions | RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with asso...もっと表示する RHOPLEX™ AC-337N is 100% Acrylic Emulsion is designed for use in semi-transparent stains. This binder provides an extremely hydrophobic film, leading to excellent water resistance and reduced liquid water permeability. It reacts more efficiently with associative thickeners, leading potentially to lower formulation cost. RHOPLEX™ AC-337N also shows improved color acceptance and alkyd compatibility. The 100% acrylic backbone ensures the high standard of tint retention, crack resistance, chalk resistance, and alkali resistance. The outstanding adhesion technology will ensure excellent adhesion to wood. The in-can clarity makes it possible to prepare transparent and semi-transparent stains with more attractive application properties than conventional alkyd emulsion or acrylic emulsion based stains. 表示を減らす | Request Sample |
| RHOPLEX™ AC-347 | Univar Solutions | RHOPLEX™ AC-347 is a 100% acrylic vehicle developed for use in interior and exterior semigloss paints. It has excellent adhesion and abrasion resistance, along with very good flow and leveling, and gloss with both dry and slurry paints. | Request Sample |
