| Accoat 1G | Accoat A/S | Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accoat 2G | Accoat A/S | Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...もっと表示する Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...もっと表示する Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G | Accoat A/S | Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...もっと表示する Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...もっと表示する Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. 表示を減らす | |
| Flexonic™ 4104 A | Lawter | Flexonic™ 4104 A is a water-based PTFE dispersion that promotes high abrasion, mar and high temperature resistance. It is formulated for a particle size of 5.5 microns for use in various paint, ink and coating applications. Flexonic™ 4104 A is considered ...もっと表示する Flexonic™ 4104 A is a water-based PTFE dispersion that promotes high abrasion, mar and high temperature resistance. It is formulated for a particle size of 5.5 microns for use in various paint, ink and coating applications. Flexonic™ 4104 A is considered ideal for use in flexographic and gravure inks and in aqueous paints and coatings. 表示を減らす | |
| Fluoron™ 672 A | Lawter | Fluoron™ 672 A is a PTFE concentrate dispersed in a non-volatile lubricating paste and is designed for abrasion resistance and lubricity in inks. Among the benefits are a narrow particle size distribution, good heat resistance, minimal effect on rheology ...もっと表示する Fluoron™ 672 A is a PTFE concentrate dispersed in a non-volatile lubricating paste and is designed for abrasion resistance and lubricity in inks. Among the benefits are a narrow particle size distribution, good heat resistance, minimal effect on rheology and gloss as well as abrasion and mar resistance properties. Fluoron™ 672 A is suitable for use in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 表示を減らす | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...もっと表示する Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. 表示を減らす | |
| Fluoron™ 960 A | Lawter | Fluoron™ 960 A is an ultra-fine PTFE dispersed in a fast-setting resinated vehicle that is formulated to give the best rub resistance and lubricity in inks. It has good slip and heat, abrasion and mar resistance properties while showing minimal effect on ...もっと表示する Fluoron™ 960 A is an ultra-fine PTFE dispersed in a fast-setting resinated vehicle that is formulated to give the best rub resistance and lubricity in inks. It has good slip and heat, abrasion and mar resistance properties while showing minimal effect on rheology and gloss. Fluoron™ 960 A is ideally suited for use in heatset offset inks, in sheet-fed offset inks and in overprint varnishes. 表示を減らす | |
| LUMIFLON® FE-4400 | Univar Solutions | LUMIFLON® FE-4400 is a water emulsion product that was developed to meet VOC and HAPS regulations on many solvents in the U. S. FE-4400 is hydroxyl functional, and can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, FE-...もっと表示する LUMIFLON® FE-4400 is a water emulsion product that was developed to meet VOC and HAPS regulations on many solvents in the U. S. FE-4400 is hydroxyl functional, and can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, FE-4400 is used to produce coatings with high gloss and excellent weatherability. 表示を減らす | Request Sample |
| LUMIFLON® LF-552 | Univar Solutions | LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment...もっと表示する LUMIFLON® LF-552 is a moderate molecular weight, moderate OH number resin dissolved in a blend of cyclohexanone and Aromatic 150 solvent. It is used in coil coatings where outstanding weatherability is required. This product is modified to improve pigment compatibility, resulting in crisp, clear colors in a broad range of colors. The major market for coil coatings made with LF-552 is in architectural coatings. 表示を減らす | Request Sample |
| LUMIFLON® LF-600X | Univar Solutions | LUMIFLON® LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is...もっと表示する LUMIFLON® LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is also being used in ambient cure applications where high coating flexibility is required, for example, in coatings for plastics. 表示を減らす | Request Sample |
| LUMIFLON® LF-710F | Univar Solutions | LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin ca...もっと表示する LUMIFLON® LF-710F is a fluorinated resin for highly durable coatings. It makes a coating that provides outstanding weathering resistance, as well as chemical resistance. LF-710F can be used to make either high or matte finish powder coatings. The resin can be crosslinked with standard aliphatic blocked isocyanates. Potential applications for coatings made with LF-710F include architectural (window frames and construction panels), heavy equipment coatings, and clear coats for automotive and aerospace applications. 表示を減らす | Request Sample |
| LUMIFLON® LF-810 | Univar Solutions | LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with...もっと表示する LUMIFLON® LF-810 is a high molecular weight, low OH number fluoropolymer resin. It is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with LF-810 include architectural, industrial maintenance, and bridge coatings. 表示を減らす | Request Sample |
| LUMIFLON® LF910LM | Univar Solutions | LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2...もっと表示する LUMIFLON® LF910LM is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2K crosslinkable coatings. Low molecular weight also allows for easy blending with other polyols. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. 表示を減らす | Request Sample |
| LUMIFLON® LF916F | Univar Solutions | LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with...もっと表示する LUMIFLON® LF916F is fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with a high hydroxyl value for formulating highly crosslinked 2K coatings with excellent performance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete. 表示を減らす | Request Sample |
| Ultrafine™ 1W A | Lawter | Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective perfo...もっと表示する Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective performance and cost. Ultrafine™ 1W A is used in heatset and sheet-fed offset inks and in UV, metal deco and overprint varnishes. 表示を減らす | |
| Ultrafine™ 1WLS A | Lawter | Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...もっと表示する Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. 表示を減らす | |
| Ultrafine™ 5W A | Lawter | Ultrafine™ 5W A is a micronized polytetrafluoroethylene powder to help coatings and inks attain their highest rub resistance and lowest C.O.F. The wax can be used with other polymers for the most effective balance of cost versus performance. Ultrafine™ 5W...もっと表示する Ultrafine™ 5W A is a micronized polytetrafluoroethylene powder to help coatings and inks attain their highest rub resistance and lowest C.O.F. The wax can be used with other polymers for the most effective balance of cost versus performance. Ultrafine™ 5W A is used in ink and coating formulations. 表示を減らす |
