UL Prospector

成功しました

検索の保存に成功しました
34 結果
STAMFORD N Aluminum Paste Silberline Manufacturing Co., Inc. STAMFORD N is a non-leafing aluminum paste. Polar solvents, i.e. alcohols, esters, ketones having low surface tension are preferred to provide ideal wetting properties of the flakes.
STAMFORD N Aluminum Paste Univar Solutions STAMFORD N is a non-leafing aluminum paste. Polar solvents, i.e. alcohols, esters, ketones having low surface tension are preferred to provide ideal wetting properties of the flakes. Request Sample
TUFFLAKE™ L-1424 Aluminum Paste Silberline Manufacturing Co., Inc. TUFFLAKE™ L-1424 is a non-leafing aluminum paste. Polar solvents, i.e. alcohols, esters, ketones having low surface tension are preferred to provide ideal wetting properties of the flakes.
TUFFLAKE™ L-1424 Aluminum Paste Univar Solutions TUFFLAKE™ L-1424 is a non-leafing aluminum paste. Polar solvents, i.e. alcohols, esters, ketones having low surface tension are preferred to provide ideal wetting properties of the flakes. Request Sample
D.E.R.™ 353 Univar Solutions D.E.R.™ 353 is a low viscosity bisphenol A / bisphenol F epoxy resin blend with very low crystallization tendency. Offers low surface tension to wet the surface better, giving better adhesion. The diluent increases pot life, flexibility (impact resistance...もっと表示する D.E.R.™ 353 is a low viscosity bisphenol A / bisphenol F epoxy resin blend with very low crystallization tendency. Offers low surface tension to wet the surface better, giving better adhesion. The diluent increases pot life, flexibility (impact resistance) and acid resistance. 表示を減らす Request Sample
DPM (Dipropylene Glycol Methyl Ether) Jiangsu Sanmu Group Corporation DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks...もっと表示する DPM is a top grade solvent used in water-based coatings. It has low toxicity, low viscosity, low surface tension, good evaporation rate, good dissolving ability, and good coupling ability. This product is widely used in paints, coatings, and printing inks. 表示を減らす
D.E.R.™ 324 Univar Solutions D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but l...もっと表示する D.E.R.™ 324 offers low viscosity and low surface tension to wet the surface better, giving better adhesion and slightly lower viscosity at any given filler loading. The diluent increases pot life, flexibility (impact resistance) and acid resistance, but limits the solvent resistance. Prone to crystallization. 表示を減らす Request Sample
GENOMER* 1120 Rahn USA Corp. GENOMER* 1120 is a cyclic mono-functional acrylate with excellent adhesion characteristics. It offers low viscosity, low shrinkage, good adhesion, high flexibility, good plastic wetting, and low surface tension. This product is recommended for several app...もっと表示する GENOMER* 1120 is a cyclic mono-functional acrylate with excellent adhesion characteristics. It offers low viscosity, low shrinkage, good adhesion, high flexibility, good plastic wetting, and low surface tension. This product is recommended for several applications, including coatings on metals and metallized substrates, coatings on plastics, inkjet, and photopolymers. 表示を減らす Request Sample
MIRAMER M130 Rahn USA Corp. MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen ...もっと表示する MIRAMER M130 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: pressure sensitive adhesives; PVC flooring; paper varnishes; and screen inks. It is an excellent adhesion promoter due to its very low surface tension表示を減らす Request Sample
Polyether Modified Siloxane FD-408 Zhejiang Feidian Chemical Co., Ltd. FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wett...もっと表示する FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wetting agent and leveling agent for water-based polyurethanes. 表示を減らす
PAT-ADD LE 1075 Patcham USA PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrat...もっと表示する PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrate wetting, optimized wetting and adhesion, easy incorporation, add and mix, low surface tension in water (0,5%): approximately 33mNm, free of silicones: no adverse effect on intercoat adhesion. 表示を減らす
Polysperse™ A Lawter Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...もっと表示する Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. 表示を減らす
EBECRYL® 145 Allnex EBECRYL® 145 is an Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated (2) neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in UV/EB curable formulations, and is an effective monomer for de...もっと表示する EBECRYL® 145 is an Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated (2) neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in UV/EB curable formulations, and is an effective monomer for developing low viscosity and low volatility coatings and inks. It is recommended for use in clear & pigmented coatings, over print varnishes, liquid inks, and pressure sensitive adhesives. 表示を減らす Request Sample
LAROMER® PO 9102 BASF Dispersions & Resins Laromer® PO 9102 is a hydrophobic difunctional monomer with a well balanced performance profile that makes it a versatile reactive diluent for adhesive, graphic arts, wood coatings and industrial coatings applications covering a wide range of substrates from paper and board over plastic films to metal. Main properties are its low surface tension that promotes flow and levelling and together with its propoxylation greatly facilitates pigment wetting. The low shrinkage also supports adhesion on plastics and imparts flexibility. Laromer® PO 9102 is a key monomer for the formulation of UV inkjet inks with its low...もっと表示する Laromer® PO 9102 is a hydrophobic difunctional monomer with a well balanced performance profile that makes it a versatile reactive diluent for adhesive, graphic arts, wood coatings and industrial coatings applications covering a wide range of substrates from paper and board over plastic films to metal. Main properties are its low surface tension that promotes flow and levelling and together with its propoxylation greatly facilitates pigment wetting. The low shrinkage also supports adhesion on plastics and imparts flexibility. Laromer® PO 9102 is a key monomer for the formulation of UV inkjet inks with its low viscosity, good flexibility and outstanding substrate and pigment wetting properties. 表示を減らす Request Sample
Surfadol® 420 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol ethoxylate) ACME Surfadol® 420 is a 100% active liquid low-foam wetting agent (HLB: 4). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This p...もっと表示する Surfadol® 420 is a 100% active liquid low-foam wetting agent (HLB: 4). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. 表示を減らす
Surfadol® 465 Surfactant ACME Surfadol® 465 is a 100% active liquid low-foam wetting agent (HLB: 13). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This ...もっと表示する Surfadol® 465 is a 100% active liquid low-foam wetting agent (HLB: 13). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. 表示を減らす
Surfadol® 440 Surfactant ACME Surfadol® 440 is a 100% active liquid low-foam wetting agent (HLB: 8). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This p...もっと表示する Surfadol® 440 is a 100% active liquid low-foam wetting agent (HLB: 8). It provides low foam dynamic and equilibrium surface tension reduction with improved dispersability and ease of incorporation in waterborne coatings, inks and adhesives systems. This product is solvent, silicone, and APE-free. 表示を減らす
D.E.R.™ 325 Univar Solutions D.E.R.™ 325 is a low viscosity liquid epoxy resin with reduced surface tension. Offers excellent wetting and flow. The low diluent content results in the improved mechanical properties over D.E.R.™ 323 and D.E.R.™ 324 epoxy resin. Request Sample
DYNOL™ 604 Evonik Operations GmbH, BL Coating Additives A low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. A 100% active liquid. Request Sample
PAT-ADD LE 1477 Patcham USA PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: o...もっと表示する PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: optimal film appearance, highly effective surface tension reducer, prevents cratering, pin-holing, orange peel; optimal flow and leveling on low surface energy substrates, air release without impact on recoat. 表示を減らす
METOLAT® 366 Munzing Chemie METOLAT® 366 is a low foaming non-ionic yellowish liquid wetting agent for water-based printing inks, adhesives and clear as well as pigmented coatings. It improves substrate wetting and levelling by reduction of surface tension. METOLAT® 366 shows defoam...もっと表示する METOLAT® 366 is a low foaming non-ionic yellowish liquid wetting agent for water-based printing inks, adhesives and clear as well as pigmented coatings. It improves substrate wetting and levelling by reduction of surface tension. METOLAT® 366 shows defoaming properties in many systems. 表示を減らす
PEL-SIL CW300 Ele Corporation PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other...もっと表示する PEL-SIL CW300 is a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic sirfactants and nonionic surfactants. 表示を減らす
PAT-ADD LE 1433 Patcham USA PAT-ADD LE 1433 is a flow and leveling additive for waterborne and polar solvent clears as well as pigmented formulations. It contributes to appealing film performances, even in coatings applied to low surface energy substrates; optimizing substrate wetti...もっと表示する PAT-ADD LE 1433 is a flow and leveling additive for waterborne and polar solvent clears as well as pigmented formulations. It contributes to appealing film performances, even in coatings applied to low surface energy substrates; optimizing substrate wetting, dearation, and crater resistance. Main benefits are: contributes to optimal film appearance and DOI, highly effective surface tension control, reduces risk for cratering, pin-holing, orange peel, provides optimal flow and leveling on low surface energy substrates, and promotes air release while retaining recoat properties. 表示を減らす
PEL-SIL CL350 Ele Corporation PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a r...もっと表示する PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a resin and surface modifier. Other uses for PEL-SIL CL350 include surface tension reduction in silicone emulsions and improvement of drainage in pulp brownstock washing. 表示を減らす
PAT-ADD SU 440 Patcham USA PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhe...もっと表示する PAT-ADD SU 440 is a nonionic surface active agent for excellent wetting and dispersing in aqueous systems with minimum foam. Due to its multifunctional properties, this product provides performance benefits in many applications, such as paints, inks, adhesives and other chemical formulations. Its main applications are in WB industrial paints, inks and adhesives. Main benefits are: excellent pigment wetting properties, does not contribute to foam formation, strong reduction of surface tension in aqueous systems, lower water solubility,low use levels, and improved flow and leveling. 表示を減らす
Dynoadd® F-404 Dynoadd by Dynea Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...もっと表示する Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. 表示を減らす
Dynoadd® F-409 Dynoadd by Dynea Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive si...もっと表示する Dynoadd® F-409 is a polyester-based, siloxane modified additive that effectively controls surface tension in UV coating systems. Dynoadd® F-409 gives excellent flow, level lingand over-spray cratering resistance to spray applied coatings. The additive significantly reduces orange peel and improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-409 has applications in general industry and wood coatings. The additive is compatible with most solvent-borne and solvent-free radiation curing systems independent of oligomer chemistry. 表示を減らす
Dynol™ 980 Surfactant Evonik Operations GmbH, BL Coating Additives Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offe...もっと表示する Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with low foam and excellent compatibility. The characteristics of Dynol™ 980 surfactant enable exceptional performance in waterborne wood coatings and overprint varnishes. This product can also provide good flow and leveling under diverse application conditions. 表示を減らす Request Sample
Dynol™ 960 Surfactant Evonik Operations GmbH, BL Coating Additives Dynol™ 960 superwetting surfactant is an optimized siloxane-based surfactant providing excellent equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it...もっと表示する Dynol™ 960 superwetting surfactant is an optimized siloxane-based surfactant providing excellent equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with extremely low foam. The characteristics of Dynol™ 960 surfactant enable exceptional performance in waterborne plastic coatings and printing inks. This product can also provide good flow and leveling under diverse application conditions. 表示を減らす Request Sample
TEGO® Wet 510 Evonik Operations GmbH, BL Coating Additives TEGO® Wet 510 is a substrate wetting additive with excellent flow promotion. It is a highly dynamic, clear liquid non-ionic organic surfactant with low foam and and is silicone-free. TEGO® Wet 510 is universally applicable and has good reduction of dynami...もっと表示する TEGO® Wet 510 is a substrate wetting additive with excellent flow promotion. It is a highly dynamic, clear liquid non-ionic organic surfactant with low foam and and is silicone-free. TEGO® Wet 510 is universally applicable and has good reduction of dynamic surface tension. It is suitable for waterborne, clear coat, and pigmented systems. It is used in both the primer/basecoat and the topcoat of lacquer coats. Addition of this product is recommended as supplied and is suitable for addition during the let-down stage. 表示を減らす Request Sample
TEGO® Wet 505 Evonik Operations GmbH, BL Coating Additives TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO...もっと表示する TEGO® Wet 505 is a substrate wetting additive with defoaming properties. It is a highly dynamic, silicone-free, non-ionic, clear liquid organic surfactant. It is universally applicable, has low foam, and has good reduction of dynamic surface tension. TEGO® Wet 505 is suitable for clear coat, pigmented, and waterborne systems. Addition of this product to the coating can be as supplied or as a predilution during the let-down stage. However, it is recommended the addition of TEGO® Wet 505 in pigmented formulations, be during the grind stage. 表示を減らす Request Sample
Siltech® C-20 Siltech Corp. Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low...もっと表示する Siltech® C-20 is a carbinol functional silicone glycol copolymer surfactant. It is a solvent free, 100% active product. It imparts mar resistance and better slip to coatings. Siltech® C-20 additive can be used in solvent, water-based or solvent=less systems. It effectively reduces surface tension and provides mar resistance or slip finishes. It also provides other benefits such as leveling, wetting, flow-out and aids pigment dispersion. It is effective at low concentrations. The recommended concentration used is between-% weight percent based on total solids. It should be added during the final thinning step. Preliminary tests in laboratory or a small-scale production unit necessary to obtain optimum results. 表示を減らす
DOWSIL™ 67 Additive Univar Solutions Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effec...もっと表示する Dow Corning® 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 表示を減らす Request Sample
DOWSIL™ 500W Additive Univar Solutions Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...もっと表示する Dow Corning® 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 表示を減らす Request Sample
DOWSIL™ 501W Additive Univar Solutions Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...もっと表示する Dow Corning® 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 表示を減らす Request Sample
DOWSIL™ 502W Additive Univar Solutions Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and eff...もっと表示する Dow Corning® 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. 表示を減らす Request Sample