UL Prospector

成功しました

検索の保存に成功しました
119 結果
Activated Carbons - Air Treatment JACOBI GROUP Activated carbon is a proven, simple solution to the control emissions of volatile organic compounds to the atmosphere. It can remove a wide range of organic compounds and is widely used in cost-effective filtration systems. The EcoSorb™ range can effecti...もっと表示する Activated carbon is a proven, simple solution to the control emissions of volatile organic compounds to the atmosphere. It can remove a wide range of organic compounds and is widely used in cost-effective filtration systems. The EcoSorb™ range can effectively eliminate BTEX, aliphatic, aromatic, halogenated and ketone pollutants. Jacobi offers granular, extruded and powdered activated carbon versions, for use dependent on the individual process conditions. 表示を減らす
Activated Carbons - Flue Gas Mercury Treatment JACOBI GROUP Unwanted, and potentially damaging, impurities and contaminants must be prevented from entering the environment following incineration. Jacobi can provide an effective solution with our activated carbon products, designed to adsorb unwelcome airborne comp...もっと表示する Unwanted, and potentially damaging, impurities and contaminants must be prevented from entering the environment following incineration. Jacobi can provide an effective solution with our activated carbon products, designed to adsorb unwelcome airborne compounds from flue gases. Products from Jacobi’s Addsorb™ series are ideal for removing mercury. Different grades of products are available for gas and liquid phase applications. 表示を減らす
Activated Carbons - Food Sweeteners / Oleochemicals / Chemicals JACOBI GROUP Jacobi’s activated carbon products can remove unwanted byproducts, odours, flavours and colours from various food products and chemicals, including: edible oils, fruit juice, wine and vinegar, cane sugar, glucose, fructose syrups, citric acid, gelatic, MS...もっと表示する Jacobi’s activated carbon products can remove unwanted byproducts, odours, flavours and colours from various food products and chemicals, including: edible oils, fruit juice, wine and vinegar, cane sugar, glucose, fructose syrups, citric acid, gelatic, MSG, glycerine, and during the brewing and bottling of soft drinks. 表示を減らす
Activated Carbons - Home Water Filters JACOBI GROUP Jacobi supplies high quality activated carbon to manufacturers of both point of use and point of entry water filter systems. Activated carbon and Actitex can remove a variety of pollutants (including pesticides, industrial chemicals and pharmaceutical byp...もっと表示する Jacobi supplies high quality activated carbon to manufacturers of both point of use and point of entry water filter systems. Activated carbon and Actitex can remove a variety of pollutants (including pesticides, industrial chemicals and pharmaceutical byproducts following disinfection) that may be present in potable water supplied from the waterworks. AquaSorb™ grade is among one of only a few materials compliant with CA Proposition 65 requirements for heavy metal leaching. 表示を減らす
Activated Carbons - Industrial Water Treatment JACOBI GROUP Using lab testing and deploying pilot equipment, Jacobi can recommend the correct activated carbon grade from our AquaSorb™ range to treat industrial wastewater, reducing toxicity and allowing safe discharge. These products can remove organics, BTEX, phen...もっと表示する Using lab testing and deploying pilot equipment, Jacobi can recommend the correct activated carbon grade from our AquaSorb™ range to treat industrial wastewater, reducing toxicity and allowing safe discharge. These products can remove organics, BTEX, phenols, colours, pesticides, AOX, surfactants and other chemicals, and can also be used for demineralisation or extensive purification in production of process or ultra-pure water. 表示を減らす
Activated Carbons - Municipal Water Treatment JACOBI GROUP Jacobi Carbons provides solutions for municipalities needing to treat water to make it safe for the public to drink and use, ensuring full compliance with regulations and certifications. Products from the AquaSorb™ range can purify drinking water by remov...もっと表示する Jacobi Carbons provides solutions for municipalities needing to treat water to make it safe for the public to drink and use, ensuring full compliance with regulations and certifications. Products from the AquaSorb™ range can purify drinking water by removing contaminants including pesticides, organic matter, taste and odour components, VOCs, man made chemicals and more. AquaSorb™ products can also treat municipal wastewater to allow safe release back into the environment. 表示を減らす
Activated Carbons - Oil & Gas Power JACOBI GROUP Oil and gas by-products are widely used in modern life, both in industry and in our day-to-day lives. Using activated carbon is a proven and effective way of removing contaminants and producing a pure product. Jacobi's carbon products can also be used to ...もっと表示する Oil and gas by-products are widely used in modern life, both in industry and in our day-to-day lives. Using activated carbon is a proven and effective way of removing contaminants and producing a pure product. Jacobi's carbon products can also be used to prevent damage to industrial equipment and recycle resources that can be reused later down the line. 表示を減らす
Activated Carbons - Pharma and Medical JACOBI GROUP Activated carbon is an effective way to tackle problems during pharmaceutical manufacturing and meet the industry’s strict regulations. With extensive knowledge of the challenges faced by pharmaceutical companies, Jacobi not only supplies carbon, but can ...もっと表示する Activated carbon is an effective way to tackle problems during pharmaceutical manufacturing and meet the industry’s strict regulations. With extensive knowledge of the challenges faced by pharmaceutical companies, Jacobi not only supplies carbon, but can also advise on the most suitable products for your needs. As well as providing carbon for use in manufacturing, Jacobi also provides carbon to be used as an ingredient in human and veterinary medicines. 表示を減らす
ASC Automatic Sample Changer Anton Paar Viscosity & Rheology ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...もっと表示する ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. 表示を減らす
Attrition Mill Munson Machinery Co., Inc. Attrition Mill produces particles within a relatively narrow particle size spectrum, from granular (10 to 200 mesh). It is employed primarily for reduction of fibrous materials, but is also suitable for friable products. It is available in three sizes wit...もっと表示する Attrition Mill produces particles within a relatively narrow particle size spectrum, from granular (10 to 200 mesh). It is employed primarily for reduction of fibrous materials, but is also suitable for friable products. It is available in three sizes with single- or dual (counter-rotating) powered discs, and extensive selection of plate designs for optimum performance. In addition to general process applications, Munson Attrition Mills are utilized for conditioning of materials prior to packaging. 表示を減らす
Automated Discharge Systems Charles Ross & Son Company A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...もっと表示する A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. 表示を減らす
CAMSIZER® - Dynamic Image Analysis System Particle Size HORIBA Instruments, Inc. CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source ...もっと表示する CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source with 20 times higher intensity. It provides extreme depth of sharpness and improved shape and size analysis across the entire measuring range. CAMSIZER® has an optimized, process oriented software, excellent compatibility to sieve analysis it is easy to reproduce and there are several language versions.Typical examples of applications for CAMSIZER® are: Salt/sugar, Sand, Polystyrene, Plastics, Carbon black/coal, Glass/ceramics, Catalysts, Coffee, Fertilisers, Abrasives, Refractory products, Drugs, Carbon products, Foodstuffs and Metal powder. 表示を減らす
CAMSIZER XT - Dynamic Image Analysis System Particle Size HORIBA Instruments, Inc. CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions...もっと表示する CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions, excellent dynamic measurement range for broad distributions or multi-modal samples and reliable detection of smallest amounts (< 0.1 %) of “oversize” particles. It also performs particle shape analysis (e. g. aspect ratio, symmetry or roundness for detection of agglomerates, broken particles or contaminations). CAMSIZER XT is ideal for granules and fine pellets, pulverized and granulated food, detergent powder and raw materials, plastic powders (also with electrostatic charge) metal and ore powders, abrasives (medium-sized and small grit), fine sands and cement, fine wood fibers and fine plastic fibers 表示を減らす
Cenomic™ 1 Bühler AG Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...もっと表示する Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 表示を減らす
Cenomic™ 15 Bühler AG Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...もっと表示する Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 表示を減らす
Cenomic™ 3 Bühler AG Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...もっと表示する Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 表示を減らす
Cenomic™ 6 Bühler AG Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...もっと表示する Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. 表示を減らす
Centrifugal Impact Mills Munson Machinery Co., Inc. Centrifugal Impact Mill ("CIM" or "Pin Mill") provides a simple, inexpensive means of grinding, sizing, de-agglomerating and homogenizing material, and can be employed as an effective infestation destroyer. It yields particle sizes down to 325 mesh and pr...もっと表示する Centrifugal Impact Mill ("CIM" or "Pin Mill") provides a simple, inexpensive means of grinding, sizing, de-agglomerating and homogenizing material, and can be employed as an effective infestation destroyer. It yields particle sizes down to 325 mesh and primarily used for friable materials. Available in #304 stainless steel, sanitary, abrasive resistant and standard carbon steel design, Centrifugal Impact Mill operates without screens, hammers, knives or rolls. 表示を減らす
CX Heavy Duty Cutter Munson Machinery Co., Inc. CX Heavy Duty Cutter is a single-rotor high torque cutter/hog with a positive, high profile raking action (unlike a shredder) for primary size reduction of large, bulky materials that typically would not fit into an SCC screen classifying cutter and/or re...もっと表示する CX Heavy Duty Cutter is a single-rotor high torque cutter/hog with a positive, high profile raking action (unlike a shredder) for primary size reduction of large, bulky materials that typically would not fit into an SCC screen classifying cutter and/or require greater torque than other cutters provide. The CX Heavy Duty Cutter delivers high horsepower at low speeds to produce tremendous torque for seemingly effortless reduction of high density, high tensile bulk materials up to 36" in size. 表示を減らす
Cylindrical Plow Blenders Munson Machinery Co., Inc. Munson Cylindrical Plow Blenders consist of a cylindrical vessel and a mixing shaft that rotates about 4-times faster. The vessel is typically filled to 60 percent of capacity that, together with fast rotation of the mixing shaft, serves to fluidize the m...もっと表示する Munson Cylindrical Plow Blenders consist of a cylindrical vessel and a mixing shaft that rotates about 4-times faster. The vessel is typically filled to 60 percent of capacity that, together with fast rotation of the mixing shaft, serves to fluidize the material and fill the entire mixing vessel with airborne material, maximizing material transfer rates while minimizing impact and degradation. 表示を減らす
Double Planetary Mixer Charles Ross & Son Company Ross pioneered the Double Planetary Mixer design more than 60 years ago. Design updates make this mixer suitable for use in applications up to 7,000,000 centipoise. A high speed design variation is also available.
DT-1201 - Acoustic & Electroacoustic Spectrometer For Particle Size Analysis And Zeta Potential HORIBA Instruments, Inc. DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provid...もっと表示する DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provide a wealth of information beyond particle size and zeta potential. For well developed applications, acoustic parameters can be correlated to other product variables. It's advantages over light based techniques include: no dilution needed the sample is measured in native state, it is much less sensitive to contamination, there is no calibration needed, higher precision and wide size range from 5nm to 100 microns. DT-1201 measures sound attenuation and velocity of any fluid like material, gels and milk, for example. 表示を減らす
FRS1600 Furnace Rheometer System Anton Paar Viscosity & Rheology FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...もっと表示する FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. 表示を減らす
Hammer Mills Munson Machinery Co., Inc. Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mil...もっと表示する Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh (versus 50 mesh [250 micron] for some competitive machines). Also designed for top efficiency, Munson Hammer Mills have an extra quarter screen located in the hinged section of the top case, increasing screen area by approximately 50% over that of conventional designs, for a total of 270°. 表示を減らす
Hauschild SpeedMixer® Brochure Hauschild GmbH & Co. KG Since 1974 Hauschild GmbH & Co. KG has been providing innovative mixing solutions worldwide for a wide range of applications. Hauschild SpeedMixer® is the most widely used equipment in laboratories when mixing is a critical part of the R&D process.
Hauschild SpeedMixer® DAC 150.1 / DAC 250.1 Hauschild GmbH & Co. KG The DAC 150.1 and DAC 250.1 are the first generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)]
Hauschild SpeedMixer® DAC 150.3 / DAC 250.3 Hauschild GmbH & Co. KG The DAC 150.3 and DAC 250.3 are the last generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)]
Hauschild SpeedMixer® DAC 150SP / DAC 250SP Hauschild GmbH & Co. KG DAC 150 SP and DAC 250 SP are small machine which allow for programming different speeds within the mixing time window.
Hauschild SpeedMixer® DAC 3000 / 5000 / 10000 HP Hauschild GmbH & Co. KG Large machines offer the possibility to mix larger batches (up to 10 kg = 22 lb) and are suitable to run small production lots.
Hauschild SpeedMixer® DAC 3000 / 5000 VAC-P Hauschild GmbH & Co. KG Large machines can be provided with a vacuum feature to achieve a very homogeneous and completely air bubble-free mixture.
Hauschild SpeedMixer® DAC 400.1 / 1100.1 Hauschild GmbH & Co. KG Machines in the medium range are capable of mixing materials compounds with nominal gross weight between 400g (.88lb) and 1.1Kg (2.42 lb).
Hauschild SpeedMixer® DAC 400.1 / 800.1 LR Hauschild GmbH & Co. KG Machines in the medium range are available in a LR (long radius) configuration, generally better for mixing materials with low specific weight .
Hauschild SpeedMixer® DAC 400.2 / 1100.2 VAC-P Hauschild GmbH & Co. KG Medium range machines can be provided with a vacuum feature, which allows to achieve a very homogeneous and completely air bubble-free mixture [nominal gross weight between 400g (.88lb) and 1.1Kg (2.42 lb)]
Hauschild SpeedMixer® DAC 400.2 / 800.2 VAC-P LR Hauschild GmbH & Co. KG 8. Medium range machines with vacuum can be provided with LR (long radius) configuration.
High Intensity Continuous Blenders Munson Machinery Co., Inc. The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of li...もっと表示する The Munson High Intensity Continuous Blender provides the added shear needed for high speed blending, homogenizing and/or de-agglomerating of dry ingredients, slurries and pastes. The blender can also be equipped with spray ports for large additions of liquids, which can also serve to dedust and/or agglomerate dry materials. 表示を減らす
High Shear Mixer Charles Ross & Son Company All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...もっと表示する All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. 表示を減らす
High Speed Disperser Charles Ross & Son Company Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic ...もっと表示する Ross High Speed Dispersers are the industry standard for durability, faster dispersion and low maintenance costs. Standard models include: explosion-proof, inverter duty motors; heavy duty V-belt drives and bearings; safety switches; an air/oil hydraulic lift system with hand/foot controls; and stainless steel wetted parts and shaft guard. Sizes range from 1/2 HP to 200 HP to handle batches from 1 to 2000 gallons. Custom designs are also available. 表示を減らす
High-Throughput Rheometer HTR 301 Anton Paar Viscosity & Rheology High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...もっと表示する High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. 表示を減らす
Ion Exchange Resins - Cabin Air Treatment JACOBI GROUP Jacobi supplies activated carbon and ion exchange resins to manufacturers of cabin air filters, used to clean air making its way inside cars from outside. Their high quality activated carbons help to purify the air by removing unwanted odours and various ...もっと表示する Jacobi supplies activated carbon and ion exchange resins to manufacturers of cabin air filters, used to clean air making its way inside cars from outside. Their high quality activated carbons help to purify the air by removing unwanted odours and various other unpleasant/harmful substances that can cause strain on the lungs. Jacobi's products can help manufacturers comply with the strict cabin air quality requirements, and they can advise on the best carbon for your needs. 表示を減らす
Ion Exchange Resins - Food Sweeteners / Oleochemicals / Chemicals JACOBI GROUP Resinex has a dedicated food grade product line to support breweries, producers of juice, wine and spirits, and any other bottled consumable liquids. Ion exchange resins from Resinex are highly effective in the areas of water filtration, decolourisation, ...もっと表示する Resinex has a dedicated food grade product line to support breweries, producers of juice, wine and spirits, and any other bottled consumable liquids. Ion exchange resins from Resinex are highly effective in the areas of water filtration, decolourisation, deashing/demineralisation, fractionation, as well as taste and odour removal. Resinex products are designed for this use in the following areas: beet sugar, corn sugar, cane sugar, purification, chromatography, raw water and demineralisation. 表示を減らす
Ion Exchange Resins - Gold Recovery / Metal Processing JACOBI GROUP Ion exchange resins are important components in a variety of mining applications. In addition to wastewater treatment, they are also useful for extraction of various metals such as gold, uranium and copper. Resinex is ready with a full assortment of resin...もっと表示する Ion exchange resins are important components in a variety of mining applications. In addition to wastewater treatment, they are also useful for extraction of various metals such as gold, uranium and copper. Resinex is ready with a full assortment of resins for mining applications. Resinex products are designed for use in recovery and surface waters treatment. 表示を減らす
Ion Exchange Resins - Home Water Filters JACOBI GROUP Ion exchange resins are used to effectively remove hazardous contaminants from drinking water and are especially effective when used in consumer POE/POU water treatment systems. Resinex products are designed for use for both purification and demineralisat...もっと表示する Ion exchange resins are used to effectively remove hazardous contaminants from drinking water and are especially effective when used in consumer POE/POU water treatment systems. Resinex products are designed for use for both purification and demineralisation. 表示を減らす
Ion Exchange Resins - Industrial Water Treatment JACOBI GROUP Resinex offers a cost-effective solution with a complete portfolio of ion exchange resins to handle water treatment on an industrial scale. Resinex products are designed for use in process water, demineralisation, condensate treatment, wastewater and puri...もっと表示する Resinex offers a cost-effective solution with a complete portfolio of ion exchange resins to handle water treatment on an industrial scale. Resinex products are designed for use in process water, demineralisation, condensate treatment, wastewater and purification. 表示を減らす
Ion Exchange Resins - Municipal Water Treatment JACOBI GROUP Resinex offers a cost-effective solution and a complete portfolio of ion exchange resins to handle municipal water treatment applications. Resinex products are designed for use in drinking water and wastewater for nitrate, heavy metals removal and softnen...もっと表示する Resinex offers a cost-effective solution and a complete portfolio of ion exchange resins to handle municipal water treatment applications. Resinex products are designed for use in drinking water and wastewater for nitrate, heavy metals removal and softnening. 表示を減らす
Ion Exchange Resins - Oil & Gas Power JACOBI GROUP Resinex products are highly efficient and are used to achieve excellent results and ensure the highest profitability in oil and gas processes. For example, in purification, demineralisation and condensate treatment.
Ion Exchange Resins - Pharma and Medical JACOBI GROUP A wide range of ion exchange resins from Resinex are highly effective at removing impurities created by the various processing stages (water, chemicals, pharmaceuticals, proteins and much more) and can control purity levels in processing streams. Our Resi...もっと表示する A wide range of ion exchange resins from Resinex are highly effective at removing impurities created by the various processing stages (water, chemicals, pharmaceuticals, proteins and much more) and can control purity levels in processing streams. Our Resinex products are designed for this purpose in chloralkaline, process water and purification. 表示を減らす
LA-300 - Portable Routine Laser Diffraction Analyzer HORIBA Instruments, Inc. The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-30...もっと表示する The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-300's revolutionary size makes it a welcome change to the other large and cumbersome designs. It's real-time displays of particle size distribution and sample concentration let the user check sample at all times. Using a diode laser, the LA-300 measures particles ranging anywhere between 0.1 and 600 μm in diameter with unprecedented precision, and processes high-resolution data for display within 20 seconds. The wide measurable range makes it ideal for application in fundamental studies and quality control of production lines in such diverse fields as pharmaceuticals, fine ceramics, metal powders, polymers, pigments, paints/coatings, adhesives, catalysts, minerals and clays, just to name a few. 表示を減らす
LA-950 - High Performance Laser Diffraction Analyzer HORIBA Instruments, Inc. LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different in...もっと表示する LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different industries. From ultra-fine nano-order particles to individually visible particles, all can be measured with this single instrument. Designed to handle the entire range of applications extending from the complex needs of research to routine quality control procedures, the LA-950 offers practicality as a"standard instrument" that is easy to use and enables precise measurement. LA-950 has a wide range of applications including: nano-level research and development, ceramics, pigments, battery materials, catalysts, cosmetics, pharmaceuticals and food products. 表示を減らす
Lab Analysis Services Univar Solutions Lab Services Take advantage today of our product performance and analytical testing capabilities from our application and formulation experts. A newly built and custom designed Analytical Laboratory in Houston, Texas enhances Univar Solutions (formerly Nexeo Lab Servi...もっと表示する Take advantage today of our product performance and analytical testing capabilities from our application and formulation experts. A newly built and custom designed Analytical Laboratory in Houston, Texas enhances Univar Solutions (formerly Nexeo Lab Services) offering for product testing services. Univar Solutions has designed a state-of-the-art chemical analysis and product testing lab that is now able to service a variety of industries and applications. 表示を減らす
Laboratory Mini-Cutters Munson Machinery Co., Inc. Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same ma...もっと表示する Munson Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. They are miniature versions of Munson's production-scale SCC Screen Classifying Cutters and as such, handle the same materials and offer similar size reduction characteristics but at lower capacities. Laboratory Mini Cutters are offered in four sizes (2", 3", 6" and 12"), all having 4" diameter rotors with three or four flutes. 表示を減らす
Large Block Shredders Munson Machinery Co., Inc. The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad ...もっと表示する The "Maxum 30" shredder from Munson reduces large blocks and bails of material into particles of narrow size ranges with minimum fines. Each of two rotors is configured with a staggered array of specially treated, solid carbide tips able to shred a broad variety of materials, including the most difficult-to-shred products. The conical tips have an interference fit into receiver slots for rapid replacement. 表示を減らす
Lovis 2000 M/ME Rolling-Ball Viscometer Anton Paar Viscosity & Rheology Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...もっと表示する Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. 表示を減らす
Lubricants & Metalworking Lab Services Univar Solutions Lab Services At Univar Solutions, our experts in lubricants and metalworking fluids understand the tolerances and requirements necessary to help ensure your products are optimized. We aim to enhance your custom formulations to grow your business. Services include form...もっと表示する At Univar Solutions, our experts in lubricants and metalworking fluids understand the tolerances and requirements necessary to help ensure your products are optimized. We aim to enhance your custom formulations to grow your business. Services include formulation development and comparative performance testing. 表示を減らす
LUBRICATION SYSTEMS MC781 PULSED Nordson EFD The MC781 system is designed for applications where pulsed lubrication or thicker lubricants are required.
LUBRICATION SYSTEMS MC800 CONTINUOUS Nordson EFD The MC800 Series system operates up to eight valves. Precision flow controls permit the amount of lubricant applied by each valve to be adjusted independently. Valves can be mounted above or below the stock
MacroMedia™ Bühler AG MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform prop...もっと表示する MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform properties achieved for the pre-ground intermediate products. This produces optimum results in fine grinding and consequently increases the quality of the end product. At the same time, the system reduces production costs due to an improved material yield and optimized energy efficiency compared with other pre-grinding solutions. 表示を減らす
MCR Rheometer Series Anton Paar Viscosity & Rheology MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...もっと表示する MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. 表示を減らす
MicroMedia™ L Bühler AG MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...もっと表示する MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
MicroMedia™ L-C Bühler AG MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...もっと表示する MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
MicroMedia™ P1-C Bühler AG MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...もっと表示する MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
MicroMedia™ P2-C Bühler AG MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...もっと表示する MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
MicroMedia™ X1 Bühler AG MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...もっと表示する MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
MicroMedia™ X2 Bühler AG MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...もっと表示する MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
MicroMedia™ X3 Bühler AG MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...もっと表示する MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
MicroMedia™ X4 Bühler AG MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...もっと表示する MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. 表示を減らす
Mini-Mixers Munson Machinery Co., Inc. Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant a...もっと表示する Mini-Mixers offer the same features as the full-scale Rotary Batch Mixer. Six models with maximum capacities of 0.25 to 15 cu-ft.This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant and small production applications, including pre-blends. for laboratories, pilot plants and small production runs including pre-blends. 表示を減らす
Multi-Shaft Mixer Charles Ross & Son Company We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion an...もっと表示する We offer Dual and Triple Shaft designs to meet your specific process requirements. Our economical Dual Shaft design includes a conventional high speed disperser and a two wing anchor agitator. This configuration is ideal for straight forward dispersion and mixing applications. 表示を減らす
Nested - Open Head Pail Cleveland Steel Container Corporation Nested - Open Head Pail has a tapered body design that allows pails to be nested to maximize storage space and freight costs. It it the most versatile and durable design for a wide range of products.
Planetary Dispersers Charles Ross & Son Company The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials ...もっと表示する The patented Planetary Disperser combines a planetary blade and a high speed dispersion blade. The planetary and the high speed disperser blades rotate on their own axes and also rotate continuously around the vessel. The planetary blade feeds materials directly into the high shear zone of the orbiting high speed disperser. This combination of unique mixing actions eliminate the need for multiple mixers i.e. 2 technologies in one machine. 表示を減らす
PML 2 Bühler AG The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...もっと表示する The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. 表示を減らす
Powder Induction Charles Ross & Son Company All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear...もっと表示する All rotor/stator mixers are comprised of a rotor that turns at high speed within a stationary stator. In a “single-stage” unit, the rotor includes a single set of four blades. As the rotating blades pass each opening in the stator, they mechanically shear particles and droplets, and expel material at high velocity into the surrounding mix, creating intense hydraulic shear. 表示を減らす
PreMax Charles Ross & Son Company This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produ...もっと表示する This single-stage rotor/stator generator is specially contoured to generate both high shear and vigorous flow in a batch mixing environment. Designed especially for pigment dispersions, the Delta rotor/stator generator is used in the Ross PreMax* to produce an intense combination of mechanical, hydraulic and cavitational shear, which results in aggressive deagglomeration. 表示を減らす
PSA300 - Static Image Analysis System Particle Size HORIBA Instruments, Inc. PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an int...もっと表示する PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an intuitive, easy-to-use imaging workstation. Analysis of numerous samples from the same batch guarantees significant statistical measurements. Clemex/Horiba PSA300 is the only image analysis system that offers this advantage. Using the microscopy solution allows to: measure different-sized particles in the same run; measure and isolate particles on the basis of shape, color, size and texture; automatically validate the accuracy and precision of measurements; scan large or small areas of one or many samples; customize reports and meet compliance. PSA300 can measure fine and ultra-fine micronized particles of many types of powdered materials. 表示を減らす
RheoLabQC Quality Control Rheometer Anton Paar Viscosity & Rheology RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...もっと表示する RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. 表示を減らす
Rheolaser™ Crystal Formulaction Inc. A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, cry...もっと表示する A new device from Formulaction, the Rheolaser™ Crystal measures the microstructure evolution of samples by detecting phase transitions and molecular movements under thermal ramping conditions. Diffusing Wave Spectroscopy is utilized to detect melting, crystallization and polymorphic transitions in bulk samples with the click of a button. This thermal analysis technique excels when measuring samples with delicate microstructures or in cases where typical thermal analysis techniques fail. 表示を減らす
Rheolaser™ Master Formulaction Inc. The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as ...もっと表示する The Rheolaser™ Master uses Diffusing Wave Spectroscopy in order to characterize the viscoelastic nature of concentrated samples in a native state. This non-invasive technique can allow for the determination of viscosity and elasticity profiles as well as accurate gel point determination. 表示を減らす
Rheometer Measuring Head Anton Paar Viscosity & Rheology Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...もっと表示する Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. 表示を減らす
RheoPlus Rheometer Software Anton Paar Viscosity & Rheology RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...もっと表示する RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. 表示を減らす
Ribbon Blender Charles Ross & Son Company Ribbon Blenders are ideal for powder blending applications. The dual action ribbon agitator creates an intimate blend in a short cycle time. Ross stocks Ribbon Blenders in many sizes from 1 - 100 cu.ft. working capacity.
Ribbon, Paddle Blenders, & Plow Blenders Munson Machinery Co., Inc. Munson has been manufacturing high performance ribbon blenders, paddle blenders and plow blenders since 1960, and has most likely solved a horizontal blending problem precisely like yours numerous times. SERIES HD Heavy Duty for materials up to 70 lbs/cu ...もっと表示する Munson has been manufacturing high performance ribbon blenders, paddle blenders and plow blenders since 1960, and has most likely solved a horizontal blending problem precisely like yours numerous times. SERIES HD Heavy Duty for materials up to 70 lbs/cu ft. SERIES XHD Extra Heavy Duty For materials heavier than 70 lbs/cu-ft. 表示を減らす
Rotary Batch Dryers/Coolers Munson Machinery Co., Inc. Munson Rotary Batch Equipment is highly effective for drying, cooling or moisturizing of bulk solid materials, independent of or in combination with, blending operations. Rotary machines can be configured for "direct" drying, cooling or moisturizing, or "...もっと表示する Munson Rotary Batch Equipment is highly effective for drying, cooling or moisturizing of bulk solid materials, independent of or in combination with, blending operations. Rotary machines can be configured for "direct" drying, cooling or moisturizing, or "indirect" drying or cooling. 表示を減らす
Rotary Batch Mixers Munson Machinery Co., Inc. The Munson Rotary Batch Mixer offers 100 percent uniform particle distribution, 100 percent uniform liquid coatings, the fastest cycle times, gentle product handling, the lowest energy consumption per pound of blended product per hour, and complete discha...もっと表示する The Munson Rotary Batch Mixer offers 100 percent uniform particle distribution, 100 percent uniform liquid coatings, the fastest cycle times, gentle product handling, the lowest energy consumption per pound of blended product per hour, and complete discharge with no segregation of blended products. 表示を減らす
Rotary Continuous Mixers Munson Machinery Co., Inc. The Munson Rotary Continuous Mixer provides gentle, 100 percent uniform, dust-free blending at rates from 25 to 5000 cubic feet per hour—inexpensively and in minimal floor space. Whether adding 1/100% minor additive to a blend, liquid-spray-coating a mate...もっと表示する The Munson Rotary Continuous Mixer provides gentle, 100 percent uniform, dust-free blending at rates from 25 to 5000 cubic feet per hour—inexpensively and in minimal floor space. Whether adding 1/100% minor additive to a blend, liquid-spray-coating a material or homogenizing, Munson has a solution to your continuous processing needs. 表示を減らす
Rotary Drum Screen Munson Machinery Co., Inc. Munson Rotary Drum Screens utilize a cylindrical drum constructed of wedge wire screen to remove solid materials from waste streams at capacities from 200 to 4,650 gal/min. Models with drums of 24 in. (610 mm) diameter are offered in 36, 48, 50 and 72 in...もっと表示する Munson Rotary Drum Screens utilize a cylindrical drum constructed of wedge wire screen to remove solid materials from waste streams at capacities from 200 to 4,650 gal/min. Models with drums of 24 in. (610 mm) diameter are offered in 36, 48, 50 and 72 in. (914, 1219, 1270 and 1829 mm) lengths. Models with drums of 36 in. (914 mm) diameter are offered in 96 and 120 in. (2438 and 3048 mm) lengths. 表示を減らす
Rotary Glass Batchers Munson Machinery Co., Inc. The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powd...もっと表示する The Munson Glass Batcher is designed for blending of ingredients (including cullet) comprising glass formulations. While designed to meet glass industry requirements, the Munson Batcher is also well suited for mixing of ceramics, refractory products, powdered metal and other highly abrasive materials with extreme reliability and efficiency. 表示を減らす
Rotary Knife Cutters Munson Machinery Co., Inc. Munson's Rotary Knife Cutter is designed primarily as a cutter/cracker for grains, spices, roots and related food products. One of the more popular applications is cutting corn for chicken feed. It delivers controlled end product sizes with minimum fines ...もっと表示する Munson's Rotary Knife Cutter is designed primarily as a cutter/cracker for grains, spices, roots and related food products. One of the more popular applications is cutting corn for chicken feed. It delivers controlled end product sizes with minimum fines at ultra-high rates, achieved by means of five rotating blades cutting against four stationary blades, and propelling on-size particles through a perforated screen with 270° of exposure. 表示を減らす
Rotary Lump Breaker Munson Machinery Co., Inc. The Rotary Lump Breaker is a heavy duty, dual-rotor mill that is inexpensive, simple to maintain, and trouble free. It is designed for cost-effective, rapid, in-line de-agglomerating, or situations where high speed and high horsepower are not required. It...もっと表示する The Rotary Lump Breaker is a heavy duty, dual-rotor mill that is inexpensive, simple to maintain, and trouble free. It is designed for cost-effective, rapid, in-line de-agglomerating, or situations where high speed and high horsepower are not required. It is available in a variety of materials such as carbon steel, #304 and #316 stainless steel, abrasion resistant steel (AR-235), and in sanitary construction. 表示を減らす
SA-9600 Series Surface Area Analyzers HORIBA Instruments, Inc. SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. ...もっと表示する SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. It's use of the flowing-gas method allows routine total surface area measurements to be made as quickly as every six minutes, depending on magnitude of surface area. The three-station SA-9603 analyzer measures three samples simultaneously. Because it is fully automated, the SA-9600 series eliminates variables that are sometimes introduced by operator involvement, such as the measurement of nitrogen or movement of the dewer flasks. The SA-9600 provides quick, user friendly specific surface area analysis for a wide variety of powders ranging from catalysts to active pharmaceutical ingredients (API’s). Low surface area API’s and excipients are particularly well suited for analysis by the SA-9600, which provides a quicker measurement time at a lower cost than competitive options. 表示を減らす
Sample Center Program Chemical Marketing Concepts, Inc. From our state-of-the-art warehouse and distribution sites strategically located in the U.S., Europe and Asia we have processed over 6.5 million sample shipments. We ship over 90% of our orders within 24 hours!
Sample Express Process Sample Express Samples are shipped in DOT approved packaging. Customer designated documents: such as MSDS, C-of-A and literature are included with each sample. Your shipments are DOT, FAA, IATA, IMO and UN compliant. Sample Express ships over 90% of our orders the day i...もっと表示する Samples are shipped in DOT approved packaging. Customer designated documents: such as MSDS, C-of-A and literature are included with each sample. Your shipments are DOT, FAA, IATA, IMO and UN compliant. Sample Express ships over 90% of our orders the day it is received and 98% within 24 hours. Our services are web based and transparent to your customer. Sample Express is Dept. of Ag. Licensed and FDA registered. 表示を減らす
Sanitary Mixers Charles Ross & Son Company Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipm...もっと表示する Ross serves the requirements of the Food, Cosmetic and Pharmaceutical industries, in virtually every industrialized country around the world. We have the experience and production capacity that no other manufacturer of specialty mixing and blending equipment can match. 表示を減らす
SCC Screen Classifying Cutters Munson Machinery Co., Inc. The Munson "SCC" Screen Classifying Cutter range of products are highly effective at cutting hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates. They feature proprietary helical rotor design with dozens of cut...もっと表示する The Munson "SCC" Screen Classifying Cutter range of products are highly effective at cutting hard, soft and fibrous materials into controlled particle sizes with minimal fines at high rates. They feature proprietary helical rotor design with dozens of cutter blades attached to a helical array of staggered holders called "interconnected parallelograms" to continuously shear oversize materials against twin, stationary bed knives. 表示を減らす
Small Package Sales Program Chemical Marketing Concepts, Inc. CMC offers small order sales of your material through our Small Package Sales Program. We can take orders directly from you or your customer for the purchase of samples, gallons, 5 gallon pails or other small sizes of products that you have designated for...もっと表示する CMC offers small order sales of your material through our Small Package Sales Program. We can take orders directly from you or your customer for the purchase of samples, gallons, 5 gallon pails or other small sizes of products that you have designated for a revenue stream. 表示を減らす
SMARTPAVE / SMARTPAVE PLUS ASPHALT RHEOMETER Anton Paar Viscosity & Rheology The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-b...もっと表示する The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315. The SmartPave rheometer takes asphalt rheology to previously unattained levels of accuracy, comfort, and ease of use. 表示を減らす
Specification & Certification Testing Services Univar Solutions Lab Services We are uniquely positioned to service the needs of the Petroleum, Petrochemical, Refining and Chemical industries. Univar Solutions (formerly Nexeo Lab Services)’ Specification and Certification Testing Lab (formerly ST Labs) has serviced the chemical an...もっと表示する We are uniquely positioned to service the needs of the Petroleum, Petrochemical, Refining and Chemical industries. Univar Solutions (formerly Nexeo Lab Services)’ Specification and Certification Testing Lab (formerly ST Labs) has serviced the chemical and petrochemical industry for more than 30 years, offering a wide range of comprehensive testing services, and continues to set the standard for quality and accuracy. 表示を減らす
SSC Magnum Cutters Munson Machinery Co., Inc. Munson's SCC Magnum Cutter is an ultra heavy-duty version of the SCC Cutter, itself an exceptionally rugged machine. While the SCC Magnum Cutter handles the same types of materials as the SCC cutter, its extremely robust design enables it to accommodate i...もっと表示する Munson's SCC Magnum Cutter is an ultra heavy-duty version of the SCC Cutter, itself an exceptionally rugged machine. While the SCC Magnum Cutter handles the same types of materials as the SCC cutter, its extremely robust design enables it to accommodate infeed of significantly larger sizes, and achieve much higher rates with ease. 表示を減らす
Static/Motionless Mixers Charles Ross & Son Company Ross LPD/LLPD (low pressure drop) and ISG (interfacial surface generator) Motionless Mixers are well known for their wide ranging uses in turbulent and laminar flow mixing applications.
Steel Pail with Full Plastic Liner Cleveland Steel Container Corporation A steel pail with a full plastic liner is an ideal package when you need the compatibility of plastic and the strength of steel.
Steel Pail with Poly Bottle Insert Cleveland Steel Container Corporation The Steel Pail with Poly Bottle Insert can be manufactured in an open head straight-sided or a tighthead style pail. This container is intended for products that need to be packaged in plastic but warrant the protection of a steel pail. It is a great opti...もっと表示する The Steel Pail with Poly Bottle Insert can be manufactured in an open head straight-sided or a tighthead style pail. This container is intended for products that need to be packaged in plastic but warrant the protection of a steel pail. It is a great option for overseas and domestic shipments where durability and overall package integrity is a concern. 表示を減らす
Straight Sided - Open Head Pail Cleveland Steel Container Corporation Straight Sided - Open Head Pail has a straight body design, and is ideal for products that require a follower plate for dispensing products such as adhesives, lubricants and greases.