2-(2-Aminoethoxy) ethanol | Univar Solutions | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | Request Sample |
ARCOT® 4004R | Univar Solutions | ARCOT® 4004R is a calcium-based rust-preventative package. It is designed for solvent and oil-based formulations. ARCOT® 4004R features include easy to handle, free of barium and other heavy metals, and water displacing. | Request Sample |
ARCOT® 645 F | Univar Solutions | ARCOT® 645 F is a mineral oil-based anti-corrosion additive, used in various film-forming anti-corrosion products. ARCOT® 645 F is an over-based calcium sulfonate. ARCOT® 645 features medium-term protection, optimum solvent-based formulation performances,...もっと表示する ARCOT® 645 F is a mineral oil-based anti-corrosion additive, used in various film-forming anti-corrosion products. ARCOT® 645 F is an over-based calcium sulfonate. ARCOT® 645 features medium-term protection, optimum solvent-based formulation performances, and compatibility with most solvents and oils. 表示を減らす | Request Sample |
Climax Ammonium Dimolybdate (ADM) | Univar Solutions | Climax Ammonium Dimolybdate (ADM) is a high purity molybdate. It is one of several compounds described as ammonium molybdate. Other product names used to describe ADM are molydbic acid 85%, molydbic acid, and ammonium polymolybdate. Ammonium Dimolybdate i...もっと表示する Climax Ammonium Dimolybdate (ADM) is a high purity molybdate. It is one of several compounds described as ammonium molybdate. Other product names used to describe ADM are molydbic acid 85%, molydbic acid, and ammonium polymolybdate. Ammonium Dimolybdate is distinguished by low trace element concentration and water solubility at 25ºC (77ºF) and 43g/100cm3. 表示を減らす | Request Sample |
Climax Ferromolybdenum 65/75 | Univar Solutions | Ferromolybdenum 65/75 can be used in any melting process to add Molybdenum to all types of iron and steel, and is supplied in a range of sizes for furnace or ladle addition. The recovery should be substantially 100 % if used correctly. For optimum recover...もっと表示する Ferromolybdenum 65/75 can be used in any melting process to add Molybdenum to all types of iron and steel, and is supplied in a range of sizes for furnace or ladle addition. The recovery should be substantially 100 % if used correctly. For optimum recoveries with ladle additions, Ferromolybdenum should be added after the molten metal has covered the bottom of the ladle and before it is three quarters full. Climax also offers Roasted Molybdenite Concentrates in powder as well as in briquetted form. 表示を減らす | Request Sample |
Climax Microfine® AO3 | Univar Solutions | Climax Microfine® AO3 is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size but...もっと表示する Climax Microfine® AO3 is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size but also a narrow particle size distribution with the absolute minimum of coarser particles above one micron. The product is predominantly senarmontite (cubic crystal form), with a high tinting strength and a bright white powder color. This product is available in both standard and high purity grades designated Climax Microfine AO3 and Climax Microfine AO3–HP respectively. 表示を減らす | Request Sample |
Climax Microfine® AO3-HP | Univar Solutions | Climax Microfine® AO3-HP is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size ...もっと表示する Climax Microfine® AO3-HP is a sub-micron particle size antimony trioxide with an average particle size of 0.3 microns. This product is produced under very carefully controlled conditions to ensure not only a very fine and consistent average particle size but also a narrow particle size distribution with the absolute minimum of coarser particles above one micron. The product is predominantly senarmontite (cubic crystal form), with a high tinting strength and a bright white powder color. This product is available in both standard and high purity grades designated Climax Microfine AO3 and Climax Microfine AO3–HP respectively. 表示を減らす | Request Sample |
Climax Molysulfide® Super Fine | Univar Solutions | Climax Molysulfide® Super Fine is a lubricant grade of molybdenum disulfide (M0S2). | Request Sample |
Climax Molysulfide® Technical | Univar Solutions | Climax Molysulfide® Technical is a lubricant grade of molybdenum disulfide (M0S2). | Request Sample |
Climax Molysulfide® Technical Fine | Univar Solutions | Climax Molysulfide® Technical Fine is a lubricant grade of molybdenum disulfide (M0S2). | Request Sample |
Climax Pure Molybdic Oxide (POC) | Univar Solutions | Climax Pure Molybdic Oxide (POC) is produced by a wet chemical process which provides a purity level of 99.99% MoOc. POC is characterized by low trace element concentrations, silicone, sulfur, and tin levels are particularly low. | Request Sample |
Climax Roasted Molybdenite Concentrate | Univar Solutions | Climax Roasted Molybdenite Concentrate is used to add molybdenum to steel produced in the electric arc furnace. The material may be added to the charge or to the molten bath. For the adjustment of the final analysis the use of Roasted Molybdenite Concentr...もっと表示する Climax Roasted Molybdenite Concentrate is used to add molybdenum to steel produced in the electric arc furnace. The material may be added to the charge or to the molten bath. For the adjustment of the final analysis the use of Roasted Molybdenite Concentrate is not recommended. For optimum recovery the following should be observed: If added with the charge the Roasted Molybdenite Concentrate containing packages should always be covered with scrap or liquid metal. If added to the bath, the product should be introduced under the slag level. If used in the electric arc furnace direct contact with the electrodes should be avoided. 表示を減らす | Request Sample |
Climax Roasted Molybdenite Concentrate Carbon Free Briquettes (CFB) | Univar Solutions | Climax Roasted Molybdenite Concentrate Carbon Free Briquettes (CFB) are used to add Molybdenum to steel and iron. They are especially designed for use in automatic handling equipment such as conveyer belts, hoppers and bins. The briquetted product is used...もっと表示する Climax Roasted Molybdenite Concentrate Carbon Free Briquettes (CFB) are used to add Molybdenum to steel and iron. They are especially designed for use in automatic handling equipment such as conveyer belts, hoppers and bins. The briquetted product is used to greatest advantage in overcoming furnace conditions under which excessive mechanical losses might be encountered. Additions of carbon free briquettes are typically made to the molten bath of electric arc furnaces or AOD vessels. If used in the electric furnace direct contact with the electrodes should be avoided. For optimum recovery it should be observed that the product gets immediate direct contact with the molten metal. For adjustment of final analysis the use of Molybdenum Oxide Carbon Free Briquettes is only recommended if subsequent metallurgical work follows the addition of the alloy. 表示を減らす | Request Sample |
Climax Sodium Molybdate Dihydrate (SMC) | Univar Solutions | Climax Sodium Molybdate Dihydrate (SMC) as represented by the formula Na2MoO4 · 2H2O. Water loss and decomposition starts at approximately 100ºC (212ºF) and subsequent anhydrous form melts at 686ºC (1267ºF). It is a white free flowing crystalline solid wi...もっと表示する Climax Sodium Molybdate Dihydrate (SMC) as represented by the formula Na2MoO4 · 2H2O. Water loss and decomposition starts at approximately 100ºC (212ºF) and subsequent anhydrous form melts at 686ºC (1267ºF). It is a white free flowing crystalline solid with a bulk density (Scott) of approximately 17g/in3. 表示を減らす | Request Sample |
Climax Sublimed Pure Molybdic Oxide (POS) | Univar Solutions | Climax Sublimed Pure Molybdic Oxide (POS) is produced by sublimation process which provides a purity level of 99.90% or higher. It is characterized by a very low trace element concentration of alkali metals. | Request Sample |
d-Limonene | Univar Solutions | d-Limonene is a hydrocarbon used as a solvent. It is commonly used in cosmetic products, and is also suitable for coatings, adhesives, inks, cleaners, and lubricants. | Request Sample |
Diethylene triamine | Univar Solutions | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...もっと表示する Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). 表示を減らす | Request Sample |
Diisopropanolamine | Univar Solutions | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...もっと表示する Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. 表示を減らす | Request Sample |
Ethylene diamine | Univar Solutions | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...もっと表示する Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. 表示を減らす | Request Sample |
Glyoxal 40% | Univar Solutions | Glyoxal 40% is a colorless to yellow liquid, with a faint odor. It is also miscible with water. It is an intermediate used in the production of adhesives, cross linkers, paper resins, pharmaceuticals, sulfur scavengers, and textile resins. | Request Sample |
Hostacor® 1435-A | Univar Solutions | Hostacor® 1435-A is a DEA free fatty acid alkanolamide that can be used as a corrosion inhibitor, lubricant, and secondary emulsifier for aqueous metalworking fluids. | Request Sample |
Hostacor® AL | Univar Solutions | Hostacor® AL is a phosphorous-free, water-dispersible corrosion inhibitor based on 100% renewable feedstocks recommended for steel-and aluminum cutting & grinding emulsions. The product has a low foaming tendency and contributes significantly to lubricati...もっと表示する Hostacor® AL is a phosphorous-free, water-dispersible corrosion inhibitor based on 100% renewable feedstocks recommended for steel-and aluminum cutting & grinding emulsions. The product has a low foaming tendency and contributes significantly to lubrication while at the same time reduces cobalt leaching. Hostacor® AL can also be added to existing metal working fluids for steel to upgrade them for machining aluminum. 表示を減らす | Request Sample |
Hostacor® IT | Univar Solutions | Hostacor® IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor® IT is an excellent corrosion inhibitors for steel and show very go...もっと表示する Hostacor® IT is a pre-neutralized, low foaming corrosion inhibitor mainly used in cutting & grinding fluids, in rolling emulsions and water-based hydraulic fluids (HFA-E, HFA-S). Hostacor® IT is an excellent corrosion inhibitors for steel and show very good hard water stability. It can be used alsone or in combination with other water-soluble corrosion inhibitors or lubricants. 表示を減らす | Request Sample |
Hostagliss® L4 | Univar Solutions | Hostagliss® L4 is a complex ester and used as lubricity improver and water-dispersable corrosion inhibitor for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions. Hostagliss® L4 is a...もっと表示する Hostagliss® L4 is a complex ester and used as lubricity improver and water-dispersable corrosion inhibitor for milky, semisynthetic and neat oil metalworking fluids. Furthermore it is used as synthetic base fluid for rolling emulsions. Hostagliss® L4 is also listed on the “Lubricant Substance Classification list (LuSC). Thus suitable for lubricants with European Ecolabel certification. 表示を減らす | Request Sample |
Hostaphat® 1322 | Univar Solutions | Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rol...もっと表示する Hostaphat® 1322 is an efficient EP/AW additive with emulsification as well as corrosion inhibiting properties for ferrous metals and aluminium alloys. It is used for metal working fluids (emulsions, semi-synthetic) as well as for rolling emulsions and rolling oils. 表示を減らす | Request Sample |
KELICO® 1460 | Univar Solutions | KELICO® 1460 is a base for grease formulations. KELICO® 1460 is dedicated to low and medium-load operating conditions. It can withstand heavy loads with additional additives. KELICO® 1460 is an over-based calcium sulfonate. KELICO® 1460 has outstanding pe...もっと表示する KELICO® 1460 is a base for grease formulations. KELICO® 1460 is dedicated to low and medium-load operating conditions. It can withstand heavy loads with additional additives. KELICO® 1460 is an over-based calcium sulfonate. KELICO® 1460 has outstanding performances such as high-temperature resistance, mechanical stability, corrosion protection and lubricity. 表示を減らす | Request Sample |
KELICO® 2460 | Univar Solutions | KELICO® 2460 is a base for grease formulations. It provides a high polar adhesion to metals and has a high hydrophobic character. KELICO® 2460 is an over-based calcium sulfonate. KELICO® 2460 has outstanding performances such as high-temperature stability...もっと表示する KELICO® 2460 is a base for grease formulations. It provides a high polar adhesion to metals and has a high hydrophobic character. KELICO® 2460 is an over-based calcium sulfonate. KELICO® 2460 has outstanding performances such as high-temperature stability, mechanical stability, corrosion protection, and lubricity. It is recommended for use as additive or non-additive greases, for gearboxes, wire ropes, paper mills, mining rods, steel mills, bearings, marine decks, etc. 表示を減らす | Request Sample |
KELICO® 2680 | Univar Solutions | KELICO® 2680 is a very soft grease with anticorrosion and high EP performances, good thermal resistance, and water tolerance. KELICO® 2680 is an over-based calcium sulfonate. Semi-fluid at room temperature, KELICO® 2680 is well-designed for bearings and g...もっと表示する KELICO® 2680 is a very soft grease with anticorrosion and high EP performances, good thermal resistance, and water tolerance. KELICO® 2680 is an over-based calcium sulfonate. Semi-fluid at room temperature, KELICO® 2680 is well-designed for bearings and gears to minimize lubricant leakage while providing ready flow to renew grease films. It is perfectly suited for centralized lube systems. KELICO® 2680 performances can be improved with additional additives for very specific applications. 表示を減らす | Request Sample |
KELICO® 3460 | Univar Solutions | KELICO® 3460 is recommended for multipurpose applications. It can withstand heavy loads with additional additives. KELICO® 3460 is an over-based calcium sulfonate. KELICO® 3460 has outstanding performances such as high-temperature resistance, mechanical s...もっと表示する KELICO® 3460 is recommended for multipurpose applications. It can withstand heavy loads with additional additives. KELICO® 3460 is an over-based calcium sulfonate. KELICO® 3460 has outstanding performances such as high-temperature resistance, mechanical stability, corrosion protection, and lubricity. 表示を減らす | Request Sample |
KELICO® V 0046 | Univar Solutions | KELICO® V 0046 is an over-based complex calcium sulfonate biodegradable base for environmentally acceptable greases’ formulations. KELICO® V 0046 has good Extreme Pressure performances, thermal resistance, and water tolerance as well as excellent anti-cor...もっと表示する KELICO® V 0046 is an over-based complex calcium sulfonate biodegradable base for environmentally acceptable greases’ formulations. KELICO® V 0046 has good Extreme Pressure performances, thermal resistance, and water tolerance as well as excellent anti-corrosion properties also in the presence of seawater. 表示を減らす | Request Sample |
KELICO® V 2150 | Univar Solutions | KELICO® V 2150 is an over-based complex calcium sulfonate biodegradable base for environmentally acceptable greases’ formulations. KELICO® V 2150 has good Extreme Pressure performances, thermal resistance, and water tolerance as well as excellent anti-cor...もっと表示する KELICO® V 2150 is an over-based complex calcium sulfonate biodegradable base for environmentally acceptable greases’ formulations. KELICO® V 2150 has good Extreme Pressure performances, thermal resistance, and water tolerance as well as excellent anti-corrosion properties also in the presence of seawater. 表示を減らす | Request Sample |
Lexolube® 2I-214 | Univar Solutions | Lexolube® 2I-214 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring hig...もっと表示する Lexolube® 2I-214 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils. 表示を減らす | Request Sample |
Lexolube® 2X-109 | Univar Solutions | Lexolube® 2X-109 is a clear, diester adipate fluid that is useful as a base oil requiring good low temperature flow properties. As an additive, it provides solvency and detergency. Lexolube® diester is used to improve additive solubility and is also usefu...もっと表示する Lexolube® 2X-109 is a clear, diester adipate fluid that is useful as a base oil requiring good low temperature flow properties. As an additive, it provides solvency and detergency. Lexolube® diester is used to improve additive solubility and is also useful to swell gearbox seals. This product provides oxidation resistance, low temperature fluidity, high quality, high solvency, and low volatility in textile oil, compressor oils, gear oils, 4-stroke oils, and 2-stroke oil applications. 表示を減らす | Request Sample |
Lexolube® 3N-310 | Univar Solutions | Lexolube® 3N-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring hig...もっと表示する Lexolube® 3N-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils. 表示を減らす | Request Sample |
Lexolube® CG-3000 | Univar Solutions | Lexolube® CG-3000 is an environmentally friendly, high viscosity synthetic complex ester especially suited as a thickener and co-base oil with vegetable oils. It allows great flexibility to blend high performance vegetable based lubricants to ISO VG 320 a...もっと表示する Lexolube® CG-3000 is an environmentally friendly, high viscosity synthetic complex ester especially suited as a thickener and co-base oil with vegetable oils. It allows great flexibility to blend high performance vegetable based lubricants to ISO VG 320 and above. Lexolube® CG-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. With greater than 65% renewable content and high biodegradability, Lexolube® CG-3000 is a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP). 表示を減らす | Request Sample |
Lexolube® CP-460LC | Univar Solutions | Lexolube® CP-460LC is a clear complex polyol ester that is 84% carbon bio-based. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a base oil f...もっと表示する Lexolube® CP-460LC is a clear complex polyol ester that is 84% carbon bio-based. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a base oil for most applications requiring high temperature stability. It features oxidation resistance, metal protection, and thermal stability. It also has a high flash point, low deposits, and additive compatibility. 表示を減らす | Request Sample |
Lexolube® CQ-3000 | Univar Solutions | Lexolube® CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester engineered for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, w...もっと表示する Lexolube® CQ-3000 is an environmentally friendly, high viscosity synthetic complex ester engineered for superior thermal and oxidative stability. It is compatible with other synthetic esters, PAO and mineral oils. It can be used as a viscosity modifier, while also improving performance in high temperature lubricant applications that exceed 200°C. Lexolube® CQ-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. Lexolube® CQ-3000 is a USDA Certified Biobased Product. 表示を減らす | Request Sample |
Lexolube® FG-220 HX1 | Univar Solutions | Lexolube® FG HX1 fluids are high performance synthetic polyol ester base oils for the food processing industries. They achieve the NSF International HX-1 ranking for use in and around food processing areas. | Request Sample |
Lexolube® HS-S | Univar Solutions | Lexolube® HS-S is a patented, hydrolytically stable ester fluid that is well suited for use in water-based metalworking fluids. | Request Sample |
LEXOLUBE® IPO | Univar Solutions | Lexolube® IPO is a long chain fatty isopropyl ester. Isopropyl esters are partially blocked by carbons atoms so they are less likely to degrade by reacting with water. | Request Sample |
Lexolube® NBS | Univar Solutions | Lexolube® NBS is a long chain fatty acid ester that provides excellent metal adhesion and a substantially lubricious film. It may be used as an oiliness additive for a broad range of metalworking applications | Request Sample |
LEXOLUBE® POE-220HT | Univar Solutions | Lexolube® POE-HT are polyol esters based upon dipentaerythritol chemistry, and therefore are optimal in terms of oxidation resistance. They are useful as base oils for most applications requiring high temperature stability. | Request Sample |
Lexolube® T-110 | Univar Solutions | Lexolube® T-110 is a long chain fatty acid ester that provides excellent metal adhesion and a substantially lubricious film. It may be used as an oiliness additive for a broad range of metalworking applications | Request Sample |
LOSMA® 347 | Univar Solutions | LOSMA® 347 is a water-soluble anti-corrosion additive for metal working fluids. | Request Sample |
LOSMA® 402 E | Univar Solutions | LOSMA® 402 E is an emulsifier recommended for metalworking fluids. It is soluble in all synthetic and mineral oil groups and offers very good emulsifying properties. | Request Sample |
LOSMA® 501 E | Univar Solutions | LOSMA® 501 E is an emulsifier recommended for metalworking fluids. It is soluble in all synthetic and mineral oil groups and offers very good emulsifying properties. | Request Sample |
Lubricit 2-EHL | Univar Solutions | Lubricit 2-EHL is a patented, hydrolytically stable ester fluid that is well suited for use in water-based metalworking fluids. | Request Sample |
Lubricit DIDA | Univar Solutions | Lubricit DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, r...もっと表示する Lubricit DIDA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life. 表示を減らす | Request Sample |
Lubricit TMP C18 | Univar Solutions | Lubricit TMP C18 is an oleic acid based polyol ester. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol backbone provides good hydrolytic and thermal stability, making is the best choice for hydrau...もっと表示する Lubricit TMP C18 is an oleic acid based polyol ester. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol backbone provides good hydrolytic and thermal stability, making is the best choice for hydraulic fluids, gear oils, and metalworking applications. 表示を減らす | Request Sample |
Lubricit TMP C9 | Univar Solutions | Lubricit TMP C9 is a polyol fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. | Request Sample |
N,N-Diethylethanol-amine | Univar Solutions | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...もっと表示する N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. 表示を減らす | Request Sample |
PB10 | Univar Solutions | PB10 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...もっと表示する PB10 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB122 | Univar Solutions | PB122 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...もっと表示する PB122 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB124 | Univar Solutions | PB124 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...もっと表示する PB124 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB128 | Univar Solutions | PB128 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film,...もっと表示する PB128 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB16 | Univar Solutions | PB16 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...もっと表示する PB16 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB18 | Univar Solutions | PB18 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...もっと表示する PB18 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB24 | Univar Solutions | PB24 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...もっと表示する PB24 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB32 | Univar Solutions | PB32 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, ...もっと表示する PB32 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB6 | Univar Solutions | PB6 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, w...もっと表示する PB6 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PB8 | Univar Solutions | PB8 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, w...もっと表示する PB8 is a Soltex Polybutene, which are viscous non-drying liquid butylene polymers. These products are ideal for a wide range of applications such as ashless dispersants, fuel and lubricant additives, caulks, sealants, adhesives, industrial stretch film, wrap film, lubricants, dielectric fluids, cosmetics and personal care. 表示を減らす | Request Sample |
PIBSA 1000HR | Univar Solutions | PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...もっと表示する PIBSA 1000HR is reacted from 1000 molecular weight highly reactive polyisobutylene. PIBSA 1000HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. 表示を減らす | Request Sample |
PIBSA 1300HR | Univar Solutions | PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...もっと表示する PIBSA 1300HR is reacted from 1300 molecular weight highly reactive polyisobutylene. PIBSA 1300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. 表示を減らす | Request Sample |
PIBSA 2300HR | Univar Solutions | PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as ...もっと表示する PIBSA 2300HR is reacted from 2300 molecular weight highly reactive polyisobutylene. PIBSA 2300HR is produced via the thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. 表示を減らす | Request Sample |
PIBSA 450HR | Univar Solutions | PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...もっと表示する PIBSA 450HR is reacted from 450 molecular weight highly reactive polyisobutylene. PIBSA 450HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. 表示を減らす | Request Sample |
PIBSA 750HR | Univar Solutions | PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfact...もっと表示する PIBSA 750HR is reacted from 750 molecular weight highly reactive polyisobutylene. PIBSA 750HR is produced via thermal process and has no residual chlorine. It has applications directly and/or as an intermediate in the synthesis of products used as surfactants in varying industries including mining and blasting, metal working, water treatment, fuel additive detergents, engine oil additive dispersants and oil & gas applications. 表示を減らす | Request Sample |
PIBSI E1 1.0 | Univar Solutions | PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...もっと表示する PIBSI E1 1.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.0%. PIBSI E1 1.0 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.0 have common applications in a broad range of fuel and lubricants. 表示を減らす | Request Sample |
PIBSI E1 1.2 | Univar Solutions | PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...もっと表示する PIBSI E1 1.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 1.2%. PIBSI E1 1.2 is derived from 2300 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI E1 1.2 have common applications in a broad range of fuel and lubricants. 表示を減らす | Request Sample |
PIBSI F1 2.0 | Univar Solutions | PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...もっと表示する PIBSI F1 2.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 2.0%. PIBSI F1 2.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 2.0 have common applications in a broad range of fuel and lubricants. 表示を減らす | Request Sample |
PIBSI F1 3.2 | Univar Solutions | PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...もっと表示する PIBSI F1 3.2 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.2%. PIBSI F1 3.2 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.2 have common applications in a broad range of fuel and lubricants. 表示を減らす | Request Sample |
PIBSI F1 3.9 | Univar Solutions | PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...もっと表示する PIBSI F1 3.9 is an ashless dispersant – succinimide containing a typical nitrogen content of 3.9%. PIBSI F1 3.9 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F1 3.9 have common applications in a broad range of fuel and lubricants. 表示を減らす | Request Sample |
PIBSI F2 5.0 | Univar Solutions | PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBS...もっと表示する PIBSI F2 5.0 is an ashless dispersant – succinimide containing a typical nitrogen content of 5.0%. PIBSI F2 5.0 is derived from 1000 molecular weight highly reactive polyisobutylene succinic anhydride and ethyleneamine. Additive packages derived from PIBSI F2 5.0 have common applications in a broad range of fuel and lubricants. 表示を減らす | Request Sample |
RB PAO 2 cSt | Univar Solutions | RB PAO 2 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in low viscosity compressor oils, hydraulic fluid, refrigeration lubricants, transmission fluids, synthetic carrier fluids, synthetic viscosity adjustment, cold cran...もっと表示する RB PAO 2 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in low viscosity compressor oils, hydraulic fluid, refrigeration lubricants, transmission fluids, synthetic carrier fluids, synthetic viscosity adjustment, cold crank reduction, and specialty industrial fluids. 表示を減らす | Request Sample |
RB PAO 4 cSt | Univar Solutions | RB PAO 4 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fl...もっと表示する RB PAO 4 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fluids. 表示を減らす | Request Sample |
RB PAO 6 cSt | Univar Solutions | RB PAO 6 cSt is PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in gear oils, hydraulic fluids, compressor oils, industrial valve lubricants, synthetic greases, crank case engine oils, dust suppressants, transformer oils, cable flu...もっと表示する RB PAO 6 cSt is PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in gear oils, hydraulic fluids, compressor oils, industrial valve lubricants, synthetic greases, crank case engine oils, dust suppressants, transformer oils, cable fluids, among others. 表示を減らす | Request Sample |
RB PAO 8 cSt | Univar Solutions | RB PAO 8 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fl...もっと表示する RB PAO 8 cSt is a PAO, polyalphaolefin, synthetic base oil, Base Oil Group IV. It is used in various industrial and automotive lubricant applications. These include gear oils, compressor oils, hydraulic fluids, greases, engine oils and other functional fluids. 表示を減らす | Request Sample |
ROSCAN® 1111 | Univar Solutions | ROSCAN® 1111 is an extreme pressure additive recommended for metalworking applications, industrial lubricants, and for grease additivation. ROSCAN® 1111 is suited especially for non-ferrous and aluminum alloy metalworking formulations. ROSCAN® 1111 is a l...もっと表示する ROSCAN® 1111 is an extreme pressure additive recommended for metalworking applications, industrial lubricants, and for grease additivation. ROSCAN® 1111 is suited especially for non-ferrous and aluminum alloy metalworking formulations. ROSCAN® 1111 is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural fatty acid esters and hydrocarbons. 表示を減らす | Request Sample |
ROSCAN® 1115 | Univar Solutions | ROSCAN® 1115 is an extreme pressure additive recommended for industrial lubricants, metalworking fluids, and grease additivation. ROSCAN® 1115 is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatty acid ...もっと表示する ROSCAN® 1115 is an extreme pressure additive recommended for industrial lubricants, metalworking fluids, and grease additivation. ROSCAN® 1115 is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatty acid esters, and hydrocarbons. ROSCAN® 1115 suited well for hole drilling, honing, lapping, grinding, and rolling applications for ferrous and non-ferrous metals. 表示を減らす | Request Sample |
ROSCAN® 1117 | Univar Solutions | ROSCAN® 1117 is an extreme pressure additive recommended to formulate metalworking fluids for cutting and deformation operations as well as grease additivation. ROSCAN® 1117 is a light-colored sulfurized, non-copper corrosive mixture of highly refined nat...もっと表示する ROSCAN® 1117 is an extreme pressure additive recommended to formulate metalworking fluids for cutting and deformation operations as well as grease additivation. ROSCAN® 1117 is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatty acid esters and hydrocarbons. Thanks to its high lubricity properties, ROSCAN® 1117 can be ideally used for formulating heavy duty metalworking fluids such as broaching, threading and deep-hole drilling applications. ROSCAN® 1117 can also be used for formulating metalworking fluids dedicated to deformation applications such as stamping and cold heading. 表示を減らす | Request Sample |
ROSCAN® 1215 | Univar Solutions | ROSCAN® 1215 is an extreme pressure additive recommended for the formulation of EP greases, metalworking fluids for ferrous and non-ferrous metals, and slideways oils ROSCAN® 1215 is a light-colored sulfurized, non-copper corrosive mixture of highly refin...もっと表示する ROSCAN® 1215 is an extreme pressure additive recommended for the formulation of EP greases, metalworking fluids for ferrous and non-ferrous metals, and slideways oils ROSCAN® 1215 is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatty acid esters and hydrocarbons. 表示を減らす | Request Sample |
ROSCAN® 1226 | Univar Solutions | ROSCAN® 1226 is an extreme pressure additive recommended for metalworking applications and for grease additivation. ROSCAN® 1226 is a light-colored sulfurized, copper-corrosive mixture of highly refined natural triglycerides and hydrocarbons with good lub...もっと表示する ROSCAN® 1226 is an extreme pressure additive recommended for metalworking applications and for grease additivation. ROSCAN® 1226 is a light-colored sulfurized, copper-corrosive mixture of highly refined natural triglycerides and hydrocarbons with good lubricity properties. ROSCAN® 1226 is especially suitable for heavy-duty straight oil formulations dedicated to deep hole drilling, tapping, broaching, and forming applications. ROSCAN® 1226 can also be used for Extreme Pressure emulsion formulations. 表示を減らす | Request Sample |
ROSCAN® 141 | Univar Solutions | ROSCAN® 141 is an extreme pressure additive recommended for metalworking applications, industrial gear oils, and for grease additivation. ROSCAN® 141 is suited especially for non-ferrous and aluminum alloy metalworking formulations. | Request Sample |
ROSCAN® 2215M | Univar Solutions | ROSCAN® 2215 M is an extreme pressure additive recommended for metalworking and deformation applications as well as grease activation. ROSCAN® 2215 M is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatt...もっと表示する ROSCAN® 2215 M is an extreme pressure additive recommended for metalworking and deformation applications as well as grease activation. ROSCAN® 2215 M is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatty acid esters, and hydrocarbons. 表示を減らす | Request Sample |
ROSCAN® 389 | Univar Solutions | ROSCAN® 389 is an extreme pressure additive recommended for metalworking fluids applications and for grease additivation. ROSCAN® 389 is a dark-colored, non-copper, corrosive sulfurized mixture of lard oil. ROSCAN® 389 can be used in straight oil for mach...もっと表示する ROSCAN® 389 is an extreme pressure additive recommended for metalworking fluids applications and for grease additivation. ROSCAN® 389 is a dark-colored, non-copper, corrosive sulfurized mixture of lard oil. ROSCAN® 389 can be used in straight oil for machining, drawing, and stamping, as well as a soluble fluid component. 表示を減らす | Request Sample |
ROSCAN® 400 | Univar Solutions | ROSCAN® 400 is an extreme pressure additive recommended for metalworking applications and for grease additivation. ROSCAN® 400 is a dark-colored sulfurized, copper-corrosive mixture of refined natural fatty acid esters. Thanks to its low viscosity, ROSCAN...もっと表示する ROSCAN® 400 is an extreme pressure additive recommended for metalworking applications and for grease additivation. ROSCAN® 400 is a dark-colored sulfurized, copper-corrosive mixture of refined natural fatty acid esters. Thanks to its low viscosity, ROSCAN® 400 can be ideally used for formulating metalworking fluids such as deep hole drilling, grinding, and honing oils. 表示を減らす | Request Sample |
ROSCAN® 4000 | Univar Solutions | ROSCAN® 4000 is a package combining extreme pressure and anti-wear additives based on calcium, sulfur, and phosphorous chemistry in vegetable oil. ROSCAN® 4000 has been specially designed for metalworking applications. It can be used for the formulation o...もっと表示する ROSCAN® 4000 is a package combining extreme pressure and anti-wear additives based on calcium, sulfur, and phosphorous chemistry in vegetable oil. ROSCAN® 4000 has been specially designed for metalworking applications. It can be used for the formulation of neat cutting oils dedicated to medium to high-severity ferrous metals metalworking operations such as drilling, tapping or, threading as well as stamping operations. ROSCAN® 4000 is an attractive solution to reduce cost and production blending time by simplifying the supply chain process. It can be an alternative to chlorinated paraffin for neat oil formulations. 表示を減らす | Request Sample |
ROSCAN® 417 | Univar Solutions | ROSCAN® 417 is an extreme pressure additive recommended for metalworking applications and grease additivation. ROSCAN®417 is a dark-colored sulfurized, non-copper corrosive mixture of highly refined natural fatty acid esters. Thanks to its low viscosity, ...もっと表示する ROSCAN® 417 is an extreme pressure additive recommended for metalworking applications and grease additivation. ROSCAN®417 is a dark-colored sulfurized, non-copper corrosive mixture of highly refined natural fatty acid esters. Thanks to its low viscosity, ROSCAN® 417 can be ideally used for formulating metalworking fluids such as deep hole drilling, grinding, and honing oils from which a good cooling effect is required. 表示を減らす | Request Sample |
ROSCAN® 512 | Univar Solutions | ROSCAN® 512 is an extreme pressure additive recommended for metalworking applications and grease additivation. ROSCAN® 512 is a dark-colored sulfurized, non-copper corrosive olefin. ROSCAN® 512 can be used in formulations of water-miscible and non-water-m...もっと表示する ROSCAN® 512 is an extreme pressure additive recommended for metalworking applications and grease additivation. ROSCAN® 512 is a dark-colored sulfurized, non-copper corrosive olefin. ROSCAN® 512 can be used in formulations of water-miscible and non-water-miscible metal working fluids. ROSCAN® 512 has relatively low anti-wear performance that can be combined effectively with phosphorus-based additives. 表示を減らす | Request Sample |
ROSCAN® 512 V2 | Univar Solutions | ROSCAN® 512 V2 is an extreme pressure additive recommended for metalworking applications and grease additivation. ROSCAN® 512 V2 is a dark-colored sulfurized, non-copper corrosive olefin. ROSCAN® 512 V2 can be used in formulations of water-miscible and no...もっと表示する ROSCAN® 512 V2 is an extreme pressure additive recommended for metalworking applications and grease additivation. ROSCAN® 512 V2 is a dark-colored sulfurized, non-copper corrosive olefin. ROSCAN® 512 V2 can be used in formulations of water-miscible and non-water-miscible metalworking fluids. ROSCAN® 512 V2 has relatively low anti-wear performance that can be combined effectively with phosphorus-based additives. 表示を減らす | Request Sample |
ROSCAN® 537 | Univar Solutions | ROSCAN® 537 is an anti-wear and Extreme Pressure additive for metalworking applications. ROSCAN® 537 is a copper-corrosive sulfurized olefin. It neither contains triglycerides nor natural fatty acid esters. ROSCAN® 537 can be used in formulations of water...もっと表示する ROSCAN® 537 is an anti-wear and Extreme Pressure additive for metalworking applications. ROSCAN® 537 is a copper-corrosive sulfurized olefin. It neither contains triglycerides nor natural fatty acid esters. ROSCAN® 537 can be used in formulations of water-miscible and non-water-miscible metalworking fluids. 表示を減らす | Request Sample |
ROSCAN® 6253 NV | Univar Solutions | ROSCAN® 6253 NV is a light-colored and ashless anti-wear additive recommended for metalworking applications and industrial lubricants. ROSCAN® 6253 NV is a dioleyl hydrogen phosphite, free of chlorine, phenol, and sulfur. It can also be used in PVC applic...もっと表示する ROSCAN® 6253 NV is a light-colored and ashless anti-wear additive recommended for metalworking applications and industrial lubricants. ROSCAN® 6253 NV is a dioleyl hydrogen phosphite, free of chlorine, phenol, and sulfur. It can also be used in PVC applications as a co-stabilizer with metal stabilizers. 表示を減らす | Request Sample |
SULFAD® 1010E | Univar Solutions | SULFAD® 1010E is an extreme pressure additive recommended for metalworking applications and for grease additivation. SULFAD® 1010E is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatty acid esters, and ...もっと表示する SULFAD® 1010E is an extreme pressure additive recommended for metalworking applications and for grease additivation. SULFAD® 1010E is a light-colored sulfurized, non-copper corrosive mixture of highly refined natural triglycerides, fatty acid esters, and hydrocarbons. 表示を減らす | Request Sample |
SULFAD® 1523E | Univar Solutions | SULFAD® 1523E is an extreme pressure additive recommended for medium to heavy-duty metalworking applications and for grease additivation. SULFAD® 1523E is a light-colored, low odor sulfurized non-copper corrosive mixture of natural fatty acid esters. | Request Sample |
SULFAD® 1711E | Univar Solutions | SULFAD® 1711E is an extreme pressure additive recommended for metalworking applications and grease additivation. SULFAD® 1711E is a light-colored, low odor-sulfurized non-copper corrosive mixture of natural fatty acid esters. Thanks to its low viscosity, ...もっと表示する SULFAD® 1711E is an extreme pressure additive recommended for metalworking applications and grease additivation. SULFAD® 1711E is a light-colored, low odor-sulfurized non-copper corrosive mixture of natural fatty acid esters. Thanks to its low viscosity, SULFAD® 1711E can be ideally used for formulating metalworking fluids such as deep hole drilling, grinding, and honing oils from which good cooling effect is required. 表示を減らす | Request Sample |
Toluene | Univar Solutions | Toluene is an aromatic hydrocarbon commonly used as a solvent. It is recommended for paints, paint thinners, sealants, printing inks, adhesives, and disinfectants. | Request Sample |
TPC 1105 | Univar Solutions | TPC 1105 is Polyisobutene. | Request Sample |
TPC 1160 | Univar Solutions | TPC 1160 is Polyisobutene. | Request Sample |
TPC 1285 | Univar Solutions | TPC 1285 is Polyisobutene. | Request Sample |
TPC 1350 | Univar Solutions | TPC 1350 is Polyisobutene. | Request Sample |
TPC 175 | Univar Solutions | TPC 175 is Polyisobutene. | Request Sample |