Presented by Envalior (a combination of DSM Engineering Materials and LANXESS High Performance Materials)
June 20, 2023 at 10:00 a.m. EDT / 4:00 p.m. CEST
In the world of battery-powered vehicles, today lithium-ion batteries (LiBs) are the preferred solution due to their higher output and energy density.
LiB cells are the basic building blocks of a battery. The cells contain the electrodes, separator and electrolyte and are stacked together inside a housing. Since the electrolyte is highly flammable, LiBs and the materials used in battery modules and packs, must meet very high safety standards. This to prevent short circuits, or leakages that could potentially lead to fires or explosions.
One way to improve the safety of LiBs is to add SuccinoNitrile(SN), an electrolyte additive, delivering a reduction of harmful gas generation, protecting the cathode and hence reducing the risk of thermal runaway as well as increasing capacity retention of batteries.
Join our webinar and learn from our experts how to meet the high safety standards and improve the overall EV battery performance.
Having trouble registering?
If you are having trouble with the registration form, please try opening it in a different internet browser.
Have a scheduling conflict?
If you are unable to attend the live event and are still interested in viewing this webinar, register now and a notification will be emailed to you when the on-demand webinar recording is available.
Presenters
Dr. Rob Janssen
Principal Scientist
Envalior (a combination of DSM Engineering Materials and LANXESS High Performance Materials)
After a master in physical chemistry and a PhD in polymer science. Since 2012 Rob is a principal scientist in the area of functional materials properties with a focus on materials for E&E applications such as (power) electronics, battery and fuel cells.
Dr. Tamim Sidiki
Global Marketing Director Mobility
Envalior (a combination of DSM Engineering Materials and LANXESS High Performance Materials)
Tamim holds a master’s degree in physics and a PhD in Electrical Engineering obtained at universities in Germany, Sweden and Scotland. Tamim has more than 20 years of experience in the consumer and automotive electronics industry.
The views, opinions and technical analyses presented here are those of the author or advertiser, and are not necessarily those of ULProspector.com or UL. The appearance of this content in the UL Prospector Knowledge Center does not constitute an endorsement by UL or its affiliates.
All content is subject to copyright and may not be reproduced without prior authorization from UL or the content author.
The content has been made available for informational and educational purposes only. While the editors of this site may verify the accuracy of its content from time to time, we assume no responsibility for errors made by the author, editorial staff or any other contributor.
UL does not make any representations or warranties with respect to the accuracy, applicability, fitness or completeness of the content. UL does not warrant the performance, effectiveness or applicability of sites listed or linked to in any content.