Tecnoflon® PFR 06HC is a new chemical resistant perfluoroelastomer (FFKM). Tecnoflon® PFR 06HC offers the widest range of aggressive media sealing capabilities along with excellent compression set values. It is suitable for most applications in temperature ranging from -10°C to 230°C, offering outstanding resistance to aggressive media such as hot organic and inorganic acids, caustics, amines (especially hot amines, i.e. at temperature higher than 70°C), ketones, aldehydes, esters, ethers, alcohols, fuels, solvents, sour gases, hydrocarbons, steam, hot water, ethylene and propylene oxide and mixed process streams. Moreover it can cope with a wide range of potent active pharmaceutical ingredients (APIs) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures. Moreover its structure was specifically designed to deliver enhanced extrusion resistance and rapid gas decompression (RGD or explosive decompression ED) resistance requested for many high pressure gas applications in the oil & gas industry. Its extreme cleanliness along with its broad chemical resistance make PFR 06HC the suitable sealing material for most wet semiconductor processes (wafer cleaning, polymer removal, wet etching, polishing), for photolithography developing and stripping and for general purpose fab equipments (pumps, scrubbers, filters, chemicals delivery systems). PFR 06HC can be combined with the cure system and other typical fluoroelastomer compounding ingredients; its mixing can be accomplished with two-roll mills or internal mixers. Finished goods may be produced by a variety of rubber processing methods. The primary use for PFR 06HC is the manufacturing of any kind of elastomeric sealing element such as O-rings, gaskets, valve bodies, butterfly valves, pump housings and stators, metal bonded parts, diaphragms, profiles, etc. These sealing elements can be used in mechanical seals, pumps, compressors, valves, reactors, mixers, sprayers, dispensers, quick connect couplings, controls, instrumentation, etc. in a wide range of industrial sectors. Tecnoflon® PFR 06HC is marketed in the form of raw polymer (1 kg box) in order to give the transformer the freedom and the opportunity to develop and fine-tune compounds and items best suited to the final application.

Tecnoflon® PFR 91 is a very high fluorine content, chemically resistant peroxide curable fluoroelastomer. It can withstand very aggressive conditions, such as almost all chemical species, including organic and inorganic acids, diluted alkalis, ketones, esters, alcohols, fuels and hot water. Tecnoflon® PFR 91 bridges the gap between traditional fluorocarbons and perfluoroelastomers. It offers much improved resistance to polar solvents (aldehydes, ketones, esters, ethers, lactones, etc.) and bases (like aqueous ammonia) than high fluorine content peroxide curable FKMs (like Tecnoflon® P 959). On the other hand, it shows enhanced cold flexibility when compared to FFKMs, as indicated by the TR10 value. Tecnoflon® PFR 91 represents the most cost effective sealing solution for solvent mixtures, as the ones to be found in the chemical and process, paint and lacquers industries as well as in biopharma laboratories and active pharmaceutical ingredient (API) manufacturing plants, for temperatures ranging from -20°C to 230°C. Tecnoflon® PFR 91 can be combined with the cure system and other typical fluoroelastomer compounding ingredients; its mixing can be accomplished with two-roll mills or internal mixers. Finished goods may be produced by a variety of rubber processing methods. The primary use for PFR 91 is the manufacturing of any kind of elastomeric sealing element such as O-rings, gaskets, valve bodies, butterfly valves, pump housings and stators, metal bonded parts, diaphragms, profiles, etc. These sealing elements can be used in mechanical seals, pumps, compressors, valves, reactors, mixers, sprayers, dispensers, quick connect couplings, controls, instrumentation, etc. in chemical and petrochemical industry, hydrocarbon processing, petroleum exploration and extraction, food processing, pharmaceutical and bio-analytical industry, aerospace and semiconductor manufacturing industries. Tecnoflon® PFR 91 is registered in the FDA Inventory of Effective Premarket Notifications for Food Contact Substances. It can be compounded so that the finished gaskets or seals can be used in food processing equipments (see "food processing compounds" section below). Tecnoflon® PFR 91 is marketed in the form of raw polymer (1 kg box) in order to give the transformer the freedom and the opportunity to develop and fine-tune compounds and items best suited to the final application.

Tecnoflon® PFR 94 is a chemical resistant perfluoroelastomer (FFKM). Tecnoflon® PFR 94 offers the widest range of aggressive media sealing capabilities along with excellent compression set values. Tecnoflon® PFR 94 is suitable for most applications in temperature ranging from -10 °C to 230 °C, offering outstanding resistance to aggressive media such as hot organic and inorganic acids, caustics, ketones, aldehydes, esters, ethers, alcohols, fuels, solvents, sour gases, hydrocarbons, steam, hot water, ethylene and propylene oxide and mixed process streams. Moreover it can cope with a wide range of potent active pharmaceutical ingredients (APIs) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures. PFR 94 can be combined with the cure system and other typical fluoroelastomer compounding ingredients; its mixing can be accomplished with two-roll mills or internal mixers. Finished goods may be produced by a variety of rubber processing methods. The primary use for PFR 94 is the manufacturing of any kind of elastomeric sealing element such as O-rings, gaskets, valve bodies, butterfly valves, pump housings and stators, metal bonded parts, diaphragms, profiles, etc. These sealing elements can be used in mechanical seals, pumps, compressors, valves, reactors, mixers, sprayers, dispensers, quick connect couplings, controls, instrumentation, etc. in a wide range of industrial sectors, such as semiconductor manufacturing, chemical process industry, oil & gas, paint spray. Tecnoflon® PFR 94 is marketed in the form of raw polymer (1 kg and 5 kg boxes) in order to give the transformer the freedom and the opportunity to develop and fine-tune compounds and items best suited to the final application.

Tecnoflon® PFR 95 is a perfluoroelastomer (FFKM) offering wide operational range and superior compression set resistance, thanks to its unique peroxide curing system that does not need any coagent (TAIC or equivalent) for curing to be carried out. Thanks to its curing system, it can offer a very broad chemical resistance in a wide variety of media including acids, caustics, ketones, aldehydes, esters, ethers, methanol, solvents, sour gases, hydrocarbons, steam, hot water and mixed process streams along with excellent thermal resistance. Tecnoflon® PFR 95 is suitable for most applications in temperature ranging from -10 °C to 280 °C. Tecnoflon® PFR 95 can be combined with other typical fluoroelastomer compounding ingredients; its mixing can be accomplished with two-roll mills or internal mixers. Finished goods may be produced by a variety of rubber processing methods. The primary use for Tecnoflon® PFR 95 is the manufacturing of any kind of elastomeric sealing element such as O-rings, gaskets, valve bodies, butterfly valves, pump housings and stators, metal bonded parts, diaphragms, profiles, etc. These sealing elements can be used in mechanical seals, pumps, compressors, valves, reactors, mixers, sprayers, dispensers, quick connect couplings, controls, instrumentation, etc. in chemical and petrochemical industry, hydrocarbon processing, petroleum exploration and extraction, bio-analytical industry, aerospace and semiconductor manufacturing industries. Tecnoflon® PFR 95 is marketed in the form of raw polymer (1 kg and 5 kg boxes) in order to give the transformer the freedom and the opportunity to develop and fine-tune compounds and items best suited to produce high performance rubber articles such as O-rings, seals, diaphragms and other parts used in process industries.

Tecnoflon® PFR 95HT is a perfluoroelastomer (FFKM) offering a significantly wider operational range and superior compression set resistance than any other perfluoroelastomer, thanks to its unique peroxide curing system that does not need any coagent (TAIC or equivalent) for curing to be carried out. It can offer a very broad chemical resistance in a wide variety of media including acids, caustics, ketones, aldehydes, esters, ethers, methanol, solvents, sour gases, hydrocarbons, steam, hot water and mixed process streams along with excellent thermal resistance. Tecnoflon® PFR 95HT is suitable for most applications in temperature ranging from -10°C to 300°C. Tecnoflon® PFR 95HT can be combined with other typical fluoroelastomer compounding ingredients; its mixing can be accomplished with two-roll mills or internal mixers. Finished goods may be produced by a variety of rubber processing methods. The primary use for Tecnoflon® PFR 95HT is the manufacturing of any kind of elastomeric sealing element such as O-rings, gaskets, valve bodies, butterfly valves, pump housings and stators, metal bonded parts, diaphragms, profiles, etc. These sealing elements can be used in mechanical seals, pumps, compressors, valves, reactors, mixers, sprayers, dispensers, quick connectcouplings, controls, instrumentation, etc. in chemical and petrochemical industry, hydrocarbon processing, petroleum exploration and extraction, bio-analytical industry, aerospace and semiconductor manufacturing industries. Tecnoflon® PFR 95HT is marketed in the form of raw polymer (1 kg and 5 kg boxes) in order to give the transformer the freedom and the opportunity to develop and fine-tune compounds and items best suited to produce high performance rubber articles such as O-rings, seals, diaphragms and other parts used in process industries.