Prospector

Polyimide (PI) by Mitsubishi Chemical Advanced Materials

Product Availability Product Description
Duratron® D7000 PI Afrique & Moyen-Orient
Duratron® D7000 PI Polyimide shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron® D7000 PI offers great chemical resistance, high strength and toughness, and outstanding dimensional stability. For these reasons, Duratron® D7000 PI is often seen as an ideal solution for designs that reduce weight, extend length of service before maintenance or replacement, and reduce overall costs by increasing process uptime.
Duratron® D7015G PI Afrique & Moyen-Orient
Duratron® D7015G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does Duratron® D7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide long wear and friction, it is a great choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factor.
Duratron® DF7000 PI Afrique & Moyen-Orient
Duratron DF7000 PI Polyimide shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron DF7000 PI offers great chemical resistance, high strength and toughness, and outstanding dimensional stability. For these reasons, Duratron DF7000 PI is often seen as an ideal solution for designs that reduce weight, extend length of service before maintenance or replacement, and reduce overall costs by increasing process uptime.
Duratron® DF7015G PI Afrique & Moyen-Orient
Duratron DF7015G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does Duratron DF7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide low wear and friction, it is a great choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factor.
Duratron® DF7040G PI Afrique & Moyen-Orient
Duratron DF7040G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does Duratron DF7040G PI maintain its performance abilities with or without lubrication, but with 40% graphite added its providing even lower wear and friction compared to Duratron DF7015G PI which maked this grade to be the best choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factor.
Duratron® DFU7000 PI Afrique & Moyen-Orient
Duratron DFU7000 PI Polyimide shapes possess superior electrical and thermal insulation properties, and outstanding mechanical performance qualities for applications that demand higher temperature resistance. In addition to these characteristics, Duratron DFU7000 PI offers great chemical resistance, high strength and toughness, and outstanding dimensional stability. For these reasons, Duratron DFU7000 PI is often seen as an ideal solution for designs that reduce weight, extend length of service before maintenance or replacement, and reduce overall costs by increasing process uptime. In comparison to Duratron DF7000 PI it has an improved thermal oxidative stability and a better dimensional stability.
Duratron® DFU7015G PI Afrique & Moyen-Orient
Duratron DFU7015G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does Duratron DFU7015G PI maintain its performance abilities with or without lubrication, but with 15% graphite added to provide low wear and friction, it is a great choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factor. In comparison to Duratron DF7015G PI it has an improved thermal oxidative stability and a better dimensional stability.
Duratron® DFU7040G PI Afrique & Moyen-Orient
Duratron DFU7040G PI Polyimide is a bearing grade PI that exhibits superior temperature and wear resistance qualities, while offering a low coefficient of friction. Not only does Duratron DFU7040G PI maintain its performance abilities with or without lubrication, but with 40% graphite added its providing even lower wear and friction compared to Duratron DFU7015G PI which maked this grade to be the best choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factor. In comparison to Duratron DF7040G PI it has an improved thermal oxidative stability and a better dimensional stability.
Duratron® T4203 PAI AE Afrique & Moyen-Orient
Duratron T4203 PAI Polyamide-imide AE offers the most superior impact strength of all Duratron T PAI grades, while also possessing the highest elongation of all Duratron grades. Due to its intrinsic high temperature resistance, dimensional stability, and exceptional machinability, DuratronT4203 PAI AE is often used for precision parts in high-tech equipment. Its ability to carry high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, and an excellent choice for wear applications involving impact loading and abrasive wear.
Duratron® T4203 PAI Afrique & Moyen-Orient
Duratron® T4203 PAI Polyamide-imide offers the most superior impact strength of all Duratron® T PAI grades, while also possessing the highest elongation of all Duratron® grades. Due to its intrinsic high temperature resistance, dimensional stability, and exceptional machinability, Duratron® T4203 PAI is often used for precision parts in high-tech equipment. Its ability to carry high loads over a broad temperature range also makes it ideal for structural components such as linkages and seal rings, and an excellent choice for wear applications involving impact loading and abrasive wear.
Duratron® T4301 PAI AE Afrique & Moyen-Orient
Duratron T4301 PAI AE Polyamide-imide offers a very low expansion rate and coefficient of friction, and also exhibits little to no slip-stick in use. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron T4203 PAI grade, and also gives DuratronT4301 PAI AE excellent dimensional stability capabilities over a wide temperature range. Duratron T4301 PAI’s AE flexural modulus is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications such as non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.
Duratron® T4301 PAI Afrique & Moyen-Orient
Duratron® T4301 PAI Polyamide-imide offers a very low expansion rate and coefficient of friction, and also exhibits little to no slip-stick in use. The addition of PTFE and graphite provides higher wear resistance compared to the unfilled Duratron® T4203 PAI grade, and also gives Duratron® T4301 PAI excellent dimensional stability capabilities over a wide temperature range. Duratron® T4301 PAI's flexural modulus of 1,000,000 psi is higher than most other advanced engineering plastics, which allows it to excel in severe service wear applications such as non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.
Duratron® T4503 PAI Afrique & Moyen-Orient
Compression molded Duratron® T4503 PAI Polyamide-imide shapes posses outstanding electrical insulation properties, and excellent dimensional stability qualities. This grade is similar in composition to Duratron® T4203 PAI, and is often selected for extreme applications where large geometries are required such as dies, or as thermal insulators.
Duratron® T4540 PAI Afrique & Moyen-Orient
Compression molded Duratron® T4540 PAI Polyamide-imide shapes were developed specifically for the Oil and Gas industry, for use in rotating equipment applications. As a sealing and bearing grade that offers a very low coefficient of friction, and superior wear properties, typical applications for Duratron® T4540 PAI include labyrinth seals, wear rings, bushings, and bearings.
Duratron® T5030 PAI Afrique & Moyen-Orient
Duratron® T5030 PAI Polyamide-imide offers high rigidity, retention of stiffness, a low expansion rate, and outstanding load carrying capabilities. As a 30% glass reinforced material, this grade is ideal for structural applications within the semiconductor and electronics, and aerospace industries.
Duratron® T5530 PAI Afrique & Moyen-Orient
Duratron® T5530 PAI Polyamide-imide is a compression molded, 30% glass reinforced grade that offers high stiffness, strength, and creep resistance. Although similar in composition to Duratron® T5030 PAI, Duratron® T5530 PAI is ideal for structural applications that support static loads for extended periods of time, at high temperatures. Additionally, Duratron® T5530 PAI exhibits superior dimensional stability up to 482° F / 250° C , making it a favored solution for precision parts in the semiconductor and electronics industry.
Duratron® T7130 PAI Afrique & Moyen-Orient
Duratron® T7130 PAI Polyamide-imide is a 30% carbon fiber-reinforced grade that offers exceptional stiffness, nonabrasive wear performance, and the lowest coefficient of thermal expansion of all PAI materials. These characteristics give Duratron® T7130 PAI the ability to withstand high pressure environments in off-shore equipment applications, making this grade a reliable choice for long term performance requirements.
Duratron® T7530 PAI Afrique & Moyen-Orient
Duratron® T7530 PAI Polyamide-imide is a compression molded, 30% carbon fiber-reinforced grade that exhibits outstanding strength and stiffness in nonabrasive wear applications.
Semitron® CMP XL20 Afrique & Moyen-Orient
Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.
Semitron® ESd 520HR PAI Afrique & Moyen-Orient
Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes possess the unique ability to resist dielectric breakdown at high voltages. As a result, Semitron® ESd 520HR PAI is the only Semitron® grade that maintains its performance throughout the 100V to 1000V voltage range, while offering the mechanical performance needed to excel in demanding applications. This characteristic, combined with its high strength and heat resistance, make Semitron® ESd 520HR PAI an ideal solution for test equipment and device handling applications within the semiconductor and electronics industry.
Semitron® MPR 1000 Afrique & Moyen-Orient
Semitron® MPR 1000 shapes possess excellent heat resistance and low rates of erosion in plasma chambers. Due to these characteristics, it is often chosen for vacuum chamber applications within etch, CVD, and ion implant sub segmentations in the semiconductor and electronics industry.
1
1