CLEAR COTE™Admiral's Club Resin is a high quality, orthophthalic, unsaturated polyester resin designed for room temperature curing by the addition of an MEK Peroxide catalyst. This system features an extended shelf life and excellent glass wet out, without draining. It has a moderate gel time, fast cure, with a good trim time and cures to a rigid solid with excellent toughness, strength, water resistance, and fatigue resistance. This resin is suitable for high end marine/boat building applications, parts production, and other general purpose uses.

CLEAR COTE™ Captain's Club resin is a low profile, low shrinkage, unsaturated polyester resin designed for room temperature curing, with the addition of an MEK Peroxide catalyst. This system features excellent glass wet out without draining. This system has a Moderate gel time and fast cure with a good trim time that allows for cures to a rigid solid, maintaining excellent toughness and strength. This resin is suitable for marine/boat-building applications, parts production, and other general purpose uses.

CLEAR COTE™ Clear Casting resin is a pre-promoted polyester resin for ambient temperature cure applications with MEK Peroxide. It has been designed with a low exo-therm to eliminate the need for multiple pours in making castings. CLEAR COTE™ Clear Casting Resin cures up with a smooth surface and exceptional clarity in small to moderate size castings. Advantages: - Self Leveling & High Gloss - A U.V. Resistant Formula - Excellent Air Release qualities - Excellent Clarity - Excellent Color Stability

Amorphous copolyester with excellent appearance, clarity and improved chemical resistance

Durastar™ DS1010 polymer contains a mold release. It has excellent appearance and clarity. Its most outstanding features are chemical resistance and excellent processing characteristics. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but DS1010 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily, fills intricate molds, and is well suited for thick-wall applications. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS1010 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product is certified to ANSI/NSF Standard 51. Key Attributes - Excellent clarity - Excellent flow - Fast drying times - Good chemical resistance - Outstanding impact resistance - Quick cycle times Applications - Appliances (food contact) - Commercial housewares - Consumer housewares-NFC - Large appliances non-food contact - Pens/stationary - Small appliances non-food contact - Sporting equipment - Visual merchandising

Durastar™ DS1110UVI polymer, contains an ultraviolet light stabilization package. It is recommended for indoor applications requiring enhanced color stability upon extended exposure to fluorescent light. It has excellent appearance and is nearly water-clear. Its other most outstanding features are chemical resistance and excellent processing characteristics. Easy to process, it flows readily, fills intricate molds, contains a mold release, and is well suited for thick-wall applications. This product is certified to ANSI/NSF Standard 51. Key Attributes - Excellent clarity - Excellent flow - Fast drying times - Good chemical resistance - Outstanding impact resistance - Quick cycle times Applications - Consumer housewares-NFC - Lighting - Sporting equipment - Wood furniture

Durastar™ DS1900HF polymer is a high flow grade of Durastar™. Durastar™ DS1900HF flow lengths are increased 20-40% relative to Durastar™ DS1000 as shown by spiral flow testing. Other outstanding features of Durastar™ are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS1900HF may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. Key Attributes - Excellent clarity - Excellent flow - Fast drying times - Good chemical resistance - Outstanding impact resistance - Quick cycle times Applications - Consumer housewares-NFC - Deodorant containers - Large appliances non-food contact - Sporting equipment

Durastar™ DS1910HF polymer is a high flow grade of Durastar™ that contains a mold release. Durastar™ DS1910HF flow lengths are increased 20-40% relative to Durastar™ DS1010 as shown by spiral flow testing. Other outstanding features of Durastar™ are easily maintained such as excellent appearance and clarity, good physical properties, chemical resistance, and easy processing. This high flow product is especially suited for those applications utilizing thin-walled intricate tools. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS1910HF may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product is certified to ANSI/NSF Standard 51. Key Attributes - Excellent clarity - Excellent flow - Fast drying times - Good chemical resistance - Outstanding impact resistance - Quick cycle times Applications - Appliances (food contact) - Chocolate molds - Commercial housewares - Consumer electronics - Consumer housewares-NFC - Displays/in-store fixtures - Fragrance packaging - Large appliances non-food contact - Lighting - Pens/stationary - Personal care packaging - Point-of-purchase - Small appliances non-food contact - Speciality containers-color cosmetics pk - Sporting equipment - Tools - Toys

Durastar™ DS2000 polymer has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. DS2000 has very good toughness as shown by Izod impact resistance. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but DS2000 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS2000 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. Key Attributes - Excellent clarity - Excellent flow - Fast drying times - Good chemical resistance - Outstanding impact resistance - Quick cycle times Applications - Building materials - Consumer housewares-NFC - Large appliances non-food contact - Sporting equipment

Durastar™ DS2010 polymer contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. DS2010 has very good toughness as shown by Izod impact resistance. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but DS2010 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Under existing United States Food and Drug Administration (FDA) regulations, Durastar™ DS2010 may be used in food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240. This product is certified to ANSI/NSF Standard 51. Key Attributes - Excellent clarity - Excellent flow - Fast drying times - Good chemical resistance - Outstanding impact resistance - Quick cycle times Applications - Consumer housewares-NFC - Eyewear - Large appliances non-food contact - Packaging components non food contact - Pens/stationary - Point-of-purchase - Small appliances non-food contact - Sporting equipment

Durastar™ DS2110UVI polymer, contains an ultraviolet light stabilization package. It is recommended for indoor applications requiring enhanced color stability upon extended exposure to fluorescent light. It has excellent appearance and is nearly water-clear. Its other most outstanding features are toughness, chemical resistance, and excellent processing characteristics. DS2110UVI has very good toughness as shown by Izod impact resistance. Easy to process, it flows readily, fills intricate molds, and contains a mold release. This product is certified to ANSI/NSF Standard 51. Key Attributes - Excellent clarity - Excellent flow - Fast drying times - Good chemical resistance - Outstanding impact resistance - Quick cycle times Applications - Appliances (food contact) - Consumer housewares-NFC - Point-of-purchase - Sporting equipment

DuraStar™ Polymer MN610 Natural polymer has excellent appearance and is nearly water-clear. Benefits include toughness, chemical resistance, and excellent processing characteristics. MN610 has very good toughness as shown by Izod impact resistance. Easy to process, it flows readily and fills intricate molds. This product does not contain a mold release. Applications - Blood contact and dialysis - Fluid administration - Medical devices

Durastar™ Polymer MN611 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. Benefits include toughness, chemical resistance, and excellent processing characteristics. MN611 has very good toughness. Key Attributes - Chemical resistance to most medical solvents including lipids and IPA - Ease of processing - Gamma and E-beam color stability Applications - Blood contact and dialysis - Fluid administration - Medical devices - Medical labware

DuraStar™ Polymer MN621 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release to improve ejection. It has excellent appearance and is nearly water-clear. This resin is the toughest of the Durastar™ family of products. It processes easily and requires minimal drying time. It has superior toughness, high clarity and good chemical resistance. Key Attributes - Chemical resistance to most medical solvents including lipids and IPA - Ease of processing - Gamma and E-beam color stability Applications - Blood contact and dialysis - Fluid administration - Medical devices

DuraStar™ Copolyester MN630 does not contain a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding feature is its high flow characteristic, with the ability to fill intricate tooling. It is easy to process with minimal drying time and has good toughness and chemical resistance. Key Attributes - Chemical resistance to most medical solvents including lipids and IPA - Ease of processing - Gamma and E-beam color stability Applications - Blood contact and dialysis - Fluid administration - Medical devices

DuraStar™ Polymer MN631 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. It contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are toughness, chemical resistance, and excellent processing characteristics. MN631 has very good toughness. Easy to process with minimal drying time, it flows readily and fills the most intricate tools. Key Attributes - Chemical resistance to most medical solvents including lipids and IPA - Ease of processing - Gamma and E-beam color stability Applications - Blood contact and dialysis - Fluid administration - Medical devices

EsterGlas™ 27 is a newly modified Polyester Hybrid resin that combines crystal clarity and rigidity with superior toughness.

This data represents typical values that have been calculated from all products classified as: Generic Polyester, TP - Glass Fiber This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic Polyester, TP - Organic This information is provided for comparative purposes only.

This data represents typical values that have been calculated from all products classified as: Generic Polyester, TP This information is provided for comparative purposes only.

PBAT Compound BT02-203 is a biodegradable polyester for blown film extrusion.

PBAT Compound BT12-203 is a biodegradable polyester for blown film extrusion.

PBAT Compound BT62-203 is a biodegradable polyester for blown film extrusion.

MALAT 04G192 NAT is a glass fibre reinforced modified thermoplastic polyester, intended for injection moulding. The product is available in different colours. It combines high mechanical, thermal properties with excellent processability and dimensional stability. APPLICATIONS MALAT 04G192 NAT is intended for the injection moulding of electrical components, automotive applications and mechanical systems, such as: - Electrical appliance components - Dashboard components - Miscellaneous

A general purpose material that is easily customized. Designed for Powder Coating and Electrostatic painting.

A general purpose material that is easily customized. Designed for Powder Coating and Electrostatic painting.

A general purpose material that is easily customized. Designed for Powder Coating and Electrostatic painting.

A general purpose material that is easily customized. Designed for Powder Coating and Electrostatic painting.

An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.

An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.

An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.

An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.

An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.

An excellent flame and track resistant material with excellent electrical and mechanical properties. Good dielectric strength and low shrink for close dimensional control.

A superior chemical resistant material with excellent flame and track resistance.

A superior chemical resistant material with excellent flame and track resistance.

A superior chemical resistant material with excellent flame and track resistance.

The high track resistant material. A flame retardant polyester molding compound with moderate strength and excellent electrical properties and exceptional arc and track resistance. Suitable for replacing porcelain in insulator and other electrical applications where higher track resistance is critical.

A superior heat resistant material. U.L. RTI rating of 160°C-170°C

High-Impact Graft-Modified Polyester Copolymer High impact and wear characteristics with superior chemical resistance to medical disinfectants, Certified Biocompatible, UV stable.