unfilled; lubricated and toughened PBT grade; especially for applications with film hinge Celanex 2004-2T is an unfilled impact modified polyester that has an excellent combination of flowability and toughness. A typical application for Celanex 2004-2T is electrical connectors containing latches and / or film hinges. Celanex 2004-2T contains an internal lubricant.

ultra high melt flow PBT polymer grade for nonwovens Celanex 2008A is a general purpose, very high flow, unreinforced polybutylene terephthalate with a good balance of mechanical properties and processability for use in melt blown applications.

unreinforced; flame retardant (UL94 V-0); non-exuding PBT grade Celanex 2016 is a non-exuding flame retarded (UL and CSA approved V-0 at 1/32 inch and 5V at 1/8 inch), unreinforced polybutylene terephthalate which has an excellent balance of mechanical properties and processability. It is well suited for electrical connector applications where UL approved 50% regrind use capability makes maximum use of purchased product.

Unreinforced, impact modified, UV stabilized PBT Celanex 2104UV is an unreinforced, impact modified, UV stabilized PBT designed for outdoor agricultural, industrial and automotive applications. Celanex 2104UV is suitable for injection molding applications.

general purpose, 10% glass-fiber reinforced grade, lubricated and stabilized

general purpose, 20% glass-fiber reinforced grade, lubricated and stabilized Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT, MGHR, 08-070N, GF20 Polybutylene terephthalate, 20 % glass fibre reinforced. Flammability UL 94 HB minimum thickness 1.2 mm. Recognition by Underwriters Laboratories, USA (UL)

General purpose, 20% glass fiber reinforced PBT grade, black color, lubricated and stabilized. Good mechanical strength and toughness.

general purpose, 30% glass-fiber reinforced grade, lubricated and stabilized Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT, MGHR, 08-100N, GF30 Polybutylene terephthalate, 30 % glass fibre reinforced. Flammability UL 94 HB minimum thickness 1.2 mm. Recognition by Underwriters Laboratories, USA (UL)

general purpose, 30% glass-fiber reinforced grade, lubricated and stabilized, with viscosity number specification Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT, MGHR, 09-100N, GF30 Polybutylene terephthalate, 30 % glass fibre reinforced. Flammability UL 94 HB minimum thickness 1.2 mm. Recognition by Underwriters Laboratories, USA (UL)

general purpose, 50% glass-fiber reinforced grade, lubricated and stabilized Chemical abbreviation according to ISO 1043: PBT GF50. Moulding compound ISO 7792-1 PBT, MGAR, 08-160, GF50. Polybutylene terephthalate, 50 % glass fiber reinforced. Flammability UL 94 HB minimum thickness 0.82 mm. Recognition by Underwriters Laboratories, USA (UL)

20% glass bead reinforced, lubricated and stabilized lower warpage grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT, MGHR, 08-040N, GB20 Polybutylene terephthalate, low warpage, 20 % glass beads. Flammability UL 94 HB minimum thickness 0.82 mm. Recognition by Underwriters Laboratories, USA (UL)

30% glass bead reinforced, lubricated and stabilized lower warpage grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT, MGHR, 08-040N, GB30 Polybutylene terephthalate, low warpage, 30 % glass beads. Flammability UL 94 HB minimum thickness 0.82 mm. Recognition by Underwriters Laboratories, USA (UL)

30% glass-fiber reinforced grade, BPA-free, for use in food contact applications Celanex® PBT 2300B GV1/30FC is a 30% glass fiber reinforced polybutylene terephthalate with a good balance of mechanical properties and processability for use in food contact applications. Celanex® PBT 2300B GV1/30FC is suitable for injection molding applications, it is BPA-free and also free from additives derived from BPA. Chemical abbreviation according to ISO 1043-1: PBT GF30, Polybutylene terephthalate, 30% glass fiber reinforced. Moulding Compound ISO 7792-1: PBT, MGMN, 09-100, GF30.

PBT + PET blend, 15% glass-fiber reinforced, lubricated and stabilized, high gloss grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT+PET, MGHR, 08-060N, GF15; Polybutylene terephthalate polymer blend with PET, 15 % glass fibre reinforced, injection molded parts with superior gloss. Flammability UL 94 HB minimum thickness 0.85 mm. Recognition by Underwriters Laboratories, USA (UL)

PBT + PET blend, 20% glass-fiber reinforced, lubricated and stabilized, high gloss grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT+PET, MGHR, 08-080N, GF20; Polybutylene terephthalate polymer blend with PET, 20 % glass fibre reinforced, injection molded parts with superior gloss. Flammability UL 94 HB minimum thickness 0.8 mm. Recognition by Underwriters Laboratories, USA (UL)

PBT + PET blend with 25% PCR-PET (post consumer recycled), 30% glass fiber reinforced, high gloss grade Chemical abbreviation according ISO 1043-1: PBT+PET Moulding compound ISO 7792- PBT/PET, MGHR, 08-110N, GF30. Polybutylene terephthalate (PBT) / recycled Polyethylene terephthalate (r-PET) polymer blend, 30% glass fiber reinforced, for injection molded parts with superior gloss and with min. 25% recycled PET content.

PBT + PET blend, 30% glass-fiber reinforced, lubricated and stabilized, high gloss grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT+PET, MGHR, 08-110N, GF30; Polybutylene terephthalate polymer blend with PET, 30 % glass fibre reinforced, injection molded parts with superior gloss. Flammability UL 94 HB minimum thickness 0.82 mm. Recognition by Underwriters Laboratories, USA (UL)

PBT + PET blend; 30% special glass reinforced; high gloss and low warpage grade; in laser transparent black color DEV CX2302 GV1/30LT ED4868 black is 30% glass fiber reinforced, injection molding for industrial parts, low warpage, dimensional stability application.

PBT + PET blend, 45% glass fiber reinforced, lubricated and stabilized, high gloss grade Celanex 2302 GV1/45 is a 45% glass fiber reinforced Polybutylene terephthalate polymer blend with PET, which provides excellent stiffness and good surface appearance.

15% PIR-CF (post-industrial recycled carbon fiber) reinforced, high gloss, electroconductive grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT/PET, MGHR, 08-0120N, CF15. Polybutylene terephthalate (PBT) polymer blend with Polyethylene terephthalate (PET), containing 15%Â Â PIR (post-industrial recycled) carbon fibre, for injection molded parts with superior gloss.

20% PIR-CF (post-industrial recycled carbon fiber) reinforced, high gloss, electroconductive grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT/PET, MGHR, 08-160C, CF20. Polybutylene terephthalate (PBT) polymer blend with Polyethylene terephthalate (PET), containing 20%Â Â PIR (post-industrial recycled) carbon fiber, for injection molded parts with superior gloss. Preliminary Data Sheet

30% PIR-CF (post-industrial recycled carbon fiber) reinforced, high gloss, electroconductive grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT/PET, MGHR, 08-0250N, CF30. Polybutylene terephthalate (PBT) polymer blend with Polyethylene terephthalate (PET), containing 30%Â Â PIR (post-industrial recycled) carbon fibre, for injection molded parts with superior gloss.

PBT + PET blend, 20% glass fiber reinforced, high gloss for friction and wear applications Chemical abbreviation according to ISO 1043-1: PBT+PET GF20, PTFE-modified grade with 20% glass fiber for injection molded parts with superior gloss and improved slip and wear characteristics. Flammability UL 94 HB minimum thickness 0.8 mm.

PBT + PET blend, 30% glass fiber reinforced, high gloss for friction and wear applications Chemical abbreviation according to ISO 1043-1: PBT+PET GF30, PTFE-modified grade with 30% glass fiber for injection molded parts with superior gloss and improved slip and wear characteristics. Flammability UL 94 HB minimum thickness 0.8 mm. Preliminary Data Sheet

unfilled medium flow, lubricated grade, for use in medical applications Celanex 2401MT is an unfilled, medium flow PBT grade for injection molding processing. Celanex 2401MT is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 10047 (US) / 10033 (EU)) and the Device Master File (MAF 443 (US) / 1078 (EU)) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products

unfilled medium flow, lubricated grade, with partially bio-based PBT, for use in medical applications Celanex 2401MT ECO-B is an unfilled, medium flow PBT grade for injection molding processing. Celanex 2401MT ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA), and is listed in the Drug Master File (DMF 10047 (US) / 10033 (EU)) and the Device Master File (MAF 443 (US) / 1078 (EU)) the corresponding EU and national registry regulatory requirements biocompatibility corresponding to USP 23 Class VI/ISO 10993 low residual monomers contains no animal products Celanex ECO-B is a PBT with the same properties and performance as standard grades, but produced with sustainability in mind. Using a mass-balance approach, 40% of biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC+ certification mass balance approach.

unfilled easy flowing nucleated grade, for use in medical applications requiring high precision Celanex 2402MT is an unfilled and nucleated, easy flow PBT grade for injection molding processing. Celanex 2402MT is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 10047 (US) / 10033 (EU)) and the Device Master File (MAF 443 (US) / 1078 (EU)) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products

unfilled easy flowing nucleated grade, with partially bio-based PBT, for use in medical applications Celanex 2402MT ECO-B is an unfilled and nucleated, easy flow PBT grade for injection molding processing. Celanex 2402MT ECO-B is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA), and is listed in the Drug Master File (DMF 10047 (US) / 10033 (EU)) and the Device Master File (MAF 443 (US) / 1078 (EU)) the corresponding EU and national registry regulatory requirements biocompatibility corresponding to USP 23 Class VI/ISO 10993 low residual monomers contains no animal products Celanex ECO-B is a PBT with the same properties and performance as standard grades, but produced with sustainability in mind. Using a mass-balance approach, 40% of biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC+ certification mass balance approach.

unfilled medium flow, PTFE filled grade, with improved sliding, low friction and wear, for use in medical applications Celanex 2404MT is an unreinforced, tribologically-modified and nucleated, medium flow PBT grade for injection molding processing. Celanex 2404MT is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 10047 (US) / 10033 (EU)) and the Device Master File (MAF 443 (US) / 1078 (EU)) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products

unfilled medium flow, lubricated, PTFE-free grade, with improved sliding, low friction and wear, for use in medical applications Celanex 2405MT is an unfilled, tribologically-modified, medium flow PBT grade for injection molding processing. Celanex 2405MT is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 10047 (US) / 10033 (EU)) and the Device Master File (MAF 443 (US) / 1078 (EU)) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products

20% glass fiber reinforced, tribological-modified medical grade, for applications with improved slip and wear characteristics Celanex 2406MT GF20 is a 20% glass fiber reinforced, tribologically-modified, medium flow PBT + PET blend grade for injection molding processing. Celanex 2406MT GF20 is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 10047 (US) / 10033 (EU)) and the Device Master File (MAF 443 (US) / 1078 (EU)) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products

20% glass fiber reinforced medical grade, for applications with high gloss and improved overmolding adhesion to TPEs Chemical abbreviation according to ISO 1043-1: PBT+PET GF20. Celanex® 2408MT® GF20 is a special grade developed for medical industry applications and is filled with 20% glass fiber for injection molded parts with superior adhesion to thermoplastic copolyesters in a two-component molding process. Celanex 2408MT GF20 is a special grade developed for medical industry applications and complies with: CFR 21 (177.1660) of the Food and Drug Administration (FDA) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP 23 Class VI/ISO 10993 low residual monomers no animal products

30% glass fiber reinforced grade, for use in medical applications requiring high stiffness Developmental grade. Preliminary datasheet. Chemical abbreviation according to ISO 1043-1: PBT GF30. Celanex® 2409MT® GF30 is a special grade developed for medical industry applications and is filled with 30% glass fiber

unfilled, nucleated & faster cycle time medical grade Preliminary Data Sheet Celanex 2411MT Natural is a developmental unreinforced PBT with improved crystallization speed and demolding behaviour allowing injection molding processing with faster cycle times, especially for Medical applications requiring high precision and consistency. Celanex 2411MT contains no animal derived materials.

unfilled easy flowing nucleated, lubricated and stabilized grade Chemical abbreviation according to ISO 1043-1: PBT Moulding compound ISO 7792- PBT, MGHR, 08-030N Polybutylene terephthalate, easy flow, nucleated grade Flammability UL 94 HB Minimum thickness 1.0 mm. Recognition by Underwriters Laboratories, USA (UL)

unfilled, easy flowing, nucleated and lubricated grade, for use in food contact applications, improved processability Celanex 2500-6FC is a general purpose, unreinforced polybutylene terephthalate with a good balance of mechanical properties and processability for use in food contact applications. Celanex 2500-6FC is a medium to high flow material that contains a lubricant and nucleant additive package, which has been designed to support customers in reaching shorter cycle times and higher productivity targets.

7.5% glass-fiber reinforced; high flow PBT grade Celanex 3100 is a general purpose, 7.5% glass reinforced polybutylene terephthalate with a good balance of mechanical properties and processability. Celanex 3100 is a high flow material.

15% glass filled PBT with good toughness

10% glass-fiber reinforced and flame retardant (UL94 V-0) grade, non-exuding Celanex 3126 is a non-exuding flame retarded, 10% fiberglass reinforced polybutylene terephthalate which has an excellent balance of mechanical properties and processability. It is well suited for electrical connector applications where its UL approved 50% regrind use capability allows maximum use of purchased product.

15% glass-fiber reinforced, general purpose, high flow grade Celanex 3200 is a general purpose, 15% glass reinforced polybutylene terephthalate with a good balance of mechanical properties and processability.