Polyethylene Terephthalate (PET) Applications: - Fiber - Packaging Features: - Solid-stated copolymer - FDA 21 CFR 177.1630

Polyethylene Terephthalate (PET) Applications: - Packaging Features: - TPA-based - Solid-stated copolymer resin - FDA 21 CFR 177.1630

Polyethylene Terephthalate (PET) Applications: - Packaging Features: - TPA-based - Uncrystallized amorphous copolymer - FDA 21 CFR 177.1630

Polyethylene Terephthalate (PET) Applications: - Packaging - Fibers Features: - Glass-like clarity - FDA 21 CFR 177.1630

Our Prime PET-G 14471 is the product of choice for most designers because the of its superior impact resistance and easy fabrication. Prime PET-G is an environmentally friendly alternative to PVC and is a mid-range priced product environmentally friendly acrylic and polycarbonate. Sustainability: Sustainability includes considering the product’s circularity or end of life during the design of the finished product. Prime PET-G is a polyester (recycle code 1) that can be recycled as a post-industrial or post-consumer product. Contact your Primex Territory Business Manager or check with local recycling facilities to determine where it is collected and recycled. Applications: Prime PET-G is designed for point of purchase, displays, store fixtures, indoor and outdoor signs, vending machine parts, and industrial building construction, and architectural components.

RAMAPET A1 is a food grade PET copolymer amorphous resin.

RAMAPET FA is a food grade PET homopolymer resin that is specially designed for Film Grade packaging market.

RAMAPET H1 is a food grade PET resin specially designed for the hot fill bottle/sheet application.

RAMAPET N1 is a general purpose food grade PET copolymer resin that is suitable for a wide variety of containers. The resin offers good strength characteristics like dimensional stability and mechanical properties. Suitable for carbonated water, alcoholic beverages, pharmaceuticals, oils, agrochemicals, wide mouth containers and for APET sheet/film extrusion application. It is also suitable for heat set blow molding that are used for warm fill applications.

RAMAPET N180 is a general purpose, non-reheat PET resin for bottles, film, thermoformed containers and other transparent applications. It has good optical properties, the mechanical properties are representative for a PET resin with IV of 0.80. RAMAPET thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.

RAMAPET N1S is a General purpose food grade PET copolymer resin that is suitable for wide variety of containers including CSD container market. The resin offers good strength characteristics and good barrier properties on gas permeability. Suitable for Water, Alcoholic beverages, Pharmaceuticals, Oils, Agrochemicals, CSD containers and for APET sheet application. It is also suitable for heat set blow molding that are used for warm fill applications.

RAMAPET N2 is a food grade PET copolymer resin that is designed especially for water applications. The resin can be processed at low temperatures and allow faster cycle times on injection molding. The resin offers excellent clarity, color, good strength characteristics and a low acetaldehyde content to help minimize impact on aroma and flavor. Suitable for still water, edible oil and miscellaneous container applications.

RAMAPET N3 is a food grade PET copolymer resin that is specially designed for the water container market. The resin can be processed at lower RPM in the extruder and shorter cycle times to minimize the AA regeneration in injection molding. It offers a very low residual acetaldehyde content to help minimize impact on aroma and flavor. Suitable for still/flat water.

RAMAPET P184 is a slow crystallizing and non-reheat PET resin for thick walled applications that require optimal transparency, like refillable bottles, cosmetic bottles and jars and preforms for big containers like 5 Gallon. RAMAPET P184 has an IV of 0.84, has good optical properties and the mechanical properties are representative for a PET resin with IV of 0.84. RAMAPET thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.

RAMAPET R1 is a high intrinsic visosity food grade PET copolymer specially designed for the CSD container market. It offers enhanced reheat ability that improves machine efficiency during blow molding.

RAMAPET R180 is a general purpose polymer with "clear reheat" for the European market. Typical applications include carbonated soft drinks (CSD), carbonated and still water, household products, pharmaceutical, and general purpose containers. The product is also suitable for film & sheet applications. RAMAPET R180 contains a moderate level of a "clear" reheat additive which does not compromise the bottle appearance. The formulation gives a better reheat consistency than PET without reheat, allowing the blowing of more complicated shapes and an efficient blowing of the latest, light-weighted preform/bottle designs. The use of reheat additive provides significant energy saving up to 30% when reheating preforms.

RAMAPET S1 is a high intrinsic viscosity food grade PET coplymer resin that is designed for CSD container market. The resin offers enhanced barrier properties on gas permeability through the bottle surfaces. Suitable for CSD/Aerated water for tropical conditions. APET sheet, beer and agrochemical application. It is also suitable for heat set blow molding that is used for warm fill applications.

RAMAPET S2 is a specialty product. The resin is a high intrinsic viscosity PET copolymer. Suitable for Strapping, thick walled Preforms and for high impact strength containers.

RAMAPET S3 is a specialty product. The resin is a very high intrinsic viscosity PET copolymer. Suitable for strapping and also suggested for extrusion blow molding.

RAMAPET S4 is a specialty product. The resin is a very high intrinsic viscosity PET copolymer. Suitable for strapping.

RAMSTER PE321G6BK10 is Black, 30% Glass Fiber Reinforced, Flame Retardant P.E.T, Injection Molding,E&E Applications

RAMSTER PE502G3BK10 is Black, 15% Glass Fiber , Flame Retardant P.E.T, Injection Molding,E&E Applications

Relpet® G5761 is bottle grade PET resin manufactured using DuPont's technology. Relpet® G5761 is typically used for still water and APET sheet application. Relpet® G5761 is engineered to provide: - Good process ability - Low preform AA and - Excellent clarity / gloss in bottles

Relpet® G5801 is bottle grade PET resin manufactured using DuPont's technology. It is typically used for: - Various foods, beverages, water etc. - Containers for FMCG such as cosmetics, hair-oil, disinfectants - Pharmaceuticals - APET sheet and PET strapping Relpet® G5801 is engineered to provide - Good processability - Excellent clarity/gloss - Properties balanced for wide range of general purpose usages.

Relpet® G5841 is bottle grade PET resin manufactured using Du Pont's technology. It is typically used for: - Aerated drinks. - Agro chemicals - APET sheet and PET strapping Relpet® G5841 is engineered to provide: - Good process ability - Excellent clarity/gloss - Very Good mechanicals

Relpet® H7761 is bottle grade PET resin manufactured using Du Pont's technology. Relpet® H7761 is used for hot filling applications for fruit juices, Ice Tea, Isotonic drinks etc. Relpet® H7761 is engineered to provide: - Good process ability - Higher neck and body crystallinity - Excellent clarity and gloss

Relpet® QH5821 is a fast reheat type bottle grade PET resin manufactured using DuPont's technology. It is widely used for aerated drinks. This grade is engineered for enhanced energy absorption which can result in increased output or reduced heating load and better process flexibility during blowing.