Polypropylene Aceso® PPM R020 S01 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developped for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. Polypropylene Aceso® PPM R020 S01 is the version of the Polypropylene Aceso® PPM R020 based on a phthalate-free catalyst.

Polypropylene Aceso® PPM R020 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developped for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants.

Polypropylene Aceso® PPM R021 S01 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developed for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. This grade can also be injection moulded. Polypropylene Aceso® PPM R021 S01 is the version of the Polypropylene Aceso® PPM R021 based on a phthalate-free catalyst.

Polypropylene Aceso® PPM R021 is random copolymer polypropylene with a Melt Flow Index of 1.8 g/10 min specially developed for the extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. This grade can also be injection moulded.

Advance™ 150 PLUS Polypropylene Resin is a clarified random copolymer designed for the blow moulding of high gloss bottles and film & sheet extrusion. Containers produced from Advance 150 PLUS exhibit good surface finish and excellent contact clarity. Typical Applications - Personal care containers - High clarity bottles - Thermoforming - Film for retort applications

Advance™ 400 Polypropylene Resin is a random co-polymer developed for thin wall injection moulding applications. It is a controlled rheology grade characterized by excellent optical properties, improved yellowness index and a good balance of stiffness and impact strength at ambient temperatures. Advance™ 400 Polypropylene Resin contains an antistatic additive. Typical Applications - Thin wall packaging - Food containers - Cosmetic containers - Aerosol dust covers

Base Polymer Polypropylene Random Copolymer Filler/Additive System barium sulphate Special Features high density, high acoustic damping, increased X-Ray contrast Market Segment Furniture, packaging, Personal care Typical Applications fixing elements, housings

Base Polymer Polypropylene Random Copolymer Filler/Additive System special filler Special Features high density Market Segment Furniture, building and construction, sport and leisure Application Area injection moulded parts Typical Applications fixing elements

Analene Q-570 melt is a nucleated random copolymer for injection molding applications. This grade is designed to be processed in conventional injection molding equipment and offers high transparency, good stiffness/impact strength balance, high gloss, good flow and low smell. Q-570 is a ‘Phthalate-Free' product. Analene Q-570 complies with FDA regulation in 21 CFR 177.1520 and 21 CFR 178.2010. Application: Food containers, stationery, disposable syringe, CD/DVD case. High transparency TWIM parts.

QTM Analene® Q-571 is a Polypropylene Random Copolymer. High fluidity, High Clarity, Anti-static, Good resistance to chemical. This product meets US FDA 21 CFR 177.1520(c) 3.1a. Bio-compatible ISO 10993-5 grade for medical devices and pharmaceutical applications.

Analene® Q-590 is a random copolymer polypropylene for injection molding applications and is suitable for ETO sterilization. It has high impact strength, excellent transparency and flow properties suitable for large thin wall products. Analene® Q-590 complies with FDA regulation in 21 CFR 177.1520 and 21 CFR 178.2010. Biocompatible ISO 10993-5 grade for medical devices and pharmaceutical applications. Application Injection molding with thin wall geometry, home appliances, transparent totes Characteristics Excellent transparency, good impact strength, high flow and excellent organoleptic properties.

EP2X83CE is a clear polypropylene random copolymer particularly suited for blow moulding technology & single or multi-layer sheet extrusion .The product imparts excellent clarity & gloss and these characteristics may be further enhanced through orientation process (i.e. injection stretch blow moulding).Due to these properties EP2X83CE is an interesting alternative to P.V.C. for use in blow moulding ,sheet extrusion & thermoforming applications. Blow moulding applications for EP2X83CE include bottle for detergents & toiletries, flat mineral water, fresh fruit juice & concentrates, jars for condiments & preserves. Extruded sheets made of EP2X83CE are widely used in stationary folders & thermoforming articles such as trays for fresh pasta, sweets or biscuits, fruit & vegetable containers & pots for dairy products. * EP2X83CE is suitable for food contact.

EP2X83CI is a polypropylene random copolymer with excellent flow properties .The product features very high transparency & gloss. EP2X83CI is mainly designed for transparent house wares & quality packaging applications. EP2X83CI is an outstanding grade for injection moulded containers & thin-walled packaging where clarity is of utmost importance. Typical injection moulding applications include food storage containers, household articles, food packaging, cosmetics & pharmaceutical products, lids, caps & closures .In many of these applications, EP2X83CI can replace PS since it can match optical properties whilst adding low weight, low odour transfer, chemical resistance & impact strength. Another major application of EP2X83CI is the co-extrusion with other polypropylene resins to produce multilayer sheet for thermoforming trays for fresh pasta & bakery products. * EP2X83CI is suitable for food contact.

High Flow Random Copolymer for thin wall parts Formerly known as DualPoly PP10001

AXLENE12RM is a clarified random copolymer that is designed for screw-injection moolding. The base resin in this product meets the requirements of the US Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good clarity - Good process stability - Good dimensional stability Typical Applications: - General injection - Housewares - Containers

AXLENE20RM is a clarified random copolymer that is designed for screw-injection molding. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good clarity - Good processing stability - Good dimensional stability Typical Applications: - Containers - Houseware

AXLENE2RM is a clarified random copolymer that is designed for injection and extrusion blow molding. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good clarity - Good processing stability - Good dimensional stability Typical Applications: - Injection and extrusión blow molding - Thermoformed containers - Multylayer sheets

AXLENE35RM is a clarified random copolymer that is designed for screw-injection molding. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good clarity - Good processing stability - Good dimensional stability Typical Applications: - Containers - Houseware - Thin-wall injection molding

This resin is a clarified random copolymer polypropylene for applications requiring impact strength. It is clarified and complies with US FDA 21 CFR 177.1520.

This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits excellent clarity and low temperature impact properties. This product meets US FDA 21 CFR 177.1520.

This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits excellent clarity and low temperature impact properties. This product meets US FDA 21 CFR 177.1520.

This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits good processing and impact properties. This product meets US FDA 21 CFR 177.1520.

This resin is a clarified PP Random Copolymer for injection molding. This resin exhibits fact-cycle injection and impact properties and contains antistat. This product meets US FDA 21 CFR 177.1520.

Beta-PPR™ RA7050 is a PP-RCT(1), a Polypropylene-Random-Copolymer with an enhanced Crystalline structure brought about by a special ß-nucleation and with an improved Temperature resistance. Proof of the excellent performance characteristics of Beta-PPR™ RA7050 is, for example, a categorised required strength (CRS) of 5 MPa at 70°C and 50 years in comparison to a value of 3.21 MPa for standard PP-R. The colour of Beta-PPR™ RA7050 is steel grey similar to RAL 7042. In general Beta-PPR™ RA7050 is intended to be used in applications for plumbing and heating, such as in-house hot and cold water pipes and fitiings, floor and wall heating systems and radiator connections.

Borclear RC737MO is a random copolymer . It is designed for blow moulding products with outstanding transparency, clarity and high gloss. This grade also provides high heat distortion temperature, very good impact and good organoleptic properties at improved processability. CAS-No. 9010-79-1 Applications - Cosmetics - Food packaging - Household applications - Containers for fine chemicals Special features - Excellent transparency - Improved gloss - Excellent clarity - Good impact behaviour

RA130E is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is natural coloured. Applications RA130E is recommended for the production of PP-R pipes and fittings used in - Heating - Plumbing - Domestic water - Relining - Industrial applications The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. Specifications RA130E is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 8078 - DIN 8077 - EN ISO 15874 Special features RA130E is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure: - Enhanced processability - Economical pipe production - Excellent product consistency - High temperature resistance - Low influence on taste & odour - Good impact strength The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.

RA130E-6017 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is green coloured. Applications RA130E-6017 is recommended for the production of PP-R pipes and fittings used in - Domestic water - Heating - Relining - Plumbing - Industrial applications The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. Specifications RA130E-6017 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 8078 - DIN 8077 - EN ISO 15874 Special features RA130E-6017 is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure: - Enhanced processability - Economical pipe production - Excellent product consistency - High temperature resistance - Low influence on taste & odour - Good impact strength The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.

RA130E-8427 (industrial) is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is grey coloured.

RA130E-8427 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is grey coloured. Applications RA130E-8427 is recommended for the production of PP-R pipes and fittings used in - Heating - Plumbing - Domestic water - Relining - Industrial applications The product is used for single as well as for multilayer pipes, where you then differentiate between plastic multilayer and aluminium multilayer pipes. Specifications RA130E-8427 is intended to fulfill following standards and regulations, in case of appropriate industrial manufacturing standard procedures applied and a continuous quality system is implemented. - DIN 8078 - DIN 8077 - EN ISO 15874 Special features RA130E-8427 is a ready made compound in pellet form for the production of pipes and fittings and included is a specially selected additive package to ensure: - Enhanced processability - Economical pipe production - Excellent product consistency - High temperature resistance - Low influence on taste & odour - Good impact strength The pipe system will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustrations and fast and easy installation.

PP-RCT (PolyPropylene-Random Crystallinity Temperature) is a material classification defined in ISO 1043-1:2001 to describe the second-generation class of PP-R materials. This pipe class, PP-RCT, has recently been included in EN ISO 15874, the global standard for plastics piping systems for Hot and Cold Water pipe installations and enable increased performance and competitiveness for pipe producers. RA7050-GN is a PP-RCT polypropylene-random-copolymer with a special crystallinity brought about by a special beta-nucleation which exhibits an improved pressure resistance, especially at elevated temperatures. PP-RCT materials such as RA7050-GN are designed to fulfil the PP-RCT pipe class as described in the EN ISO 15874 standard, e.g. 50 years service life at 70°C at 5 MPa, compared to 3.2 MPa for standard PP-R materials when tested according to the ISO 9080 pipe pressure tests. RA7050-GN is ready compounded for maximum quality control. The colour of RA7050-GN is green similar to RAL 6024. Applications In general RA7050-GN is intended to be used in applications for plumbing and heating, such as in-house hot and cold water pipes and fittings, floor and wall heating systems and radiator connections.

RB206MO is a random copolymer with good transparency and contact clarity, very good gloss and surface finish The high stiffness of this grade allows for a reduction in cycle time. This grade also features high heat distortion temperature. Applications - Monolayer and multilayer bottles in the food or cosmetic - industry (hot filling) - Cosmetics Special features - High stiffness - Improved gloss and excellent transparency - Good contact clarity - Optimal surface

RB307MO is a random copolymer with good transparency and contact clarity, very good gloss and surface finish This grade also features high heat distortion temperature. Applications - Household and chemical containers such as detergents, cleaners, motor oils - Industrial chemicals - Cosmetics Special features - Improved gloss and excellent transparency - Good contact clarity - Optimal surface

RB707CF is a random copolymer Applications RB707CF is recommended for: - Transparant packaging film - Sealing layer in coextrusion - Textile packaging film - Food packaging - Lamination films - Label film - Technical and protection film Additives RB707CF does not contain slip or antiblock additives. Special features RB707CF is optimised to deliver: - High gloss - Low haze - Heat sterilisable - High stiffness - Good sealing performance

RD204CF is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No.: 9010-79-1 Applications RD204CF is recommended for: - Food packaging - Stationary films - Lamination films - Flower packaging Textile packaging film

RD208CF is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. Applications RD208CF is recommended for: - Food packaging - Lamination films - Textile packaging film - Stationary films - Flower packaging

RD234CF is a random copolymer. This grade is suitable for the manufacturing of unoriented films on chill roll processes. RD234CF contains antiblock and slip agents.

RD364CF - is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No.: 9010-79-1 Applications RD364CF is recommended for: - Food packaging - Textile packaging film - High quality stationery film - Flower packaging - Lamination films Additives RD364CF is a slip, antiblock and antistatic formulated resin. Additives Content Antiblock (SiO2) 1800 ppm Borealis Method Slip 1500 ppm Borealis Method Calcium stearate Yes Antistatic agent Yes Borealis Method

RD366CF - is a random copolymer This grade is suitable for the manufacturing of unoriented films on chill roll processes. CAS-No.: 9010-79-1 Applications RD366CF is recommended for: - Food packaging - Textile packaging film - Stationary films - Flower packaging - Lamination films Additives RD366CF is a slip, antiblock and antistatic formulated resin. Additives Content Antiblock (SiO2) 1800 ppm Borealis Method Slip 1500 ppm Borealis Method Antistatic agent Yes Borealis Method Calcium stearate Yes Borealis Method

RD461CF is a random copolymer. This grade is suitable for the manufacturing of unoriented films on chill roll processes. RD461CF contains antistatic additives contains antiblock and slip agents.