3950 is a low gloss, high impact nucleated polypropylene copolymer. It is best suited for automotive interior trim applications and other injection molding applications where high melt fluidity is important.

H00G-00 is a fractional melt flow rate homopolymer that meets the FDA requirements of 21 CFR 177.1520; please see the H00G-00 Regulatory Position Statement for additional details.

H01H-00 is a low flow rate homopolymer polypropylene containing a Long Term Heat Aging package. Typical applications include injection molded parts and sheet and profile extrusion; this product is not recommended for taste or odor sensitive applications. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H02C-00 is a low flow rate, high clarity, nucleated homopolymer designed for extrusion, thermoforming, blow molding, and rigid packaging applications that require good see-through clarity combined with good heat resistance. Typical applications include thermoformed cups, containers and lidding; extrusion blow molded containers and bottles, injection stretch blow molded containers and bottles, extruded sheet and profiles. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H02C-01 is a low flow rate, clarified homopolymer designed for extrusion, thermoforming, blow molding, and rigid packaging applications that require good see-through clarity combined with good heat resistance. Typical applications include thermoformed cups, containers and lidding; extrusion blow molded containers and bottles, injection stretch blow molded containers and bottles, extruded sheet and profiles. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H02C-04 is a low flow rate, high clarity, nucleated homopolymer designed for extrusion, thermoforming, blow molding and rigid packaging applications that require good see-through clarity combined with good heat resistance. H02C-04 utilizes new nucleator technology that gives the finished part a slight bluish hue resulting in a clearer and crisper-looking final product. Typical applications include thermoformed cups, containers and lidding; extrusion blow molded containers and bottles, injection stretch blow molded containers and bottles and extruded sheets and profiles. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H02G-02 is a homopolymer polypropylene designed for film and extrusion applications. Typical applications include BOPP film, thermoformed sheet, tape, twine and woven bags. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H03G-06 is a polypropylene homopolymer designed for BOPP applications. Applications include food packaging films, overwrap, and metallized films. Benefits include consistent high speed processing and good optical properties. This resin meets the requirements of the U.S. Food and Drug administration as specified in 12 CFR 177.1520.

H03W-00 is a low water carryover homopolymer polypropylene designed for extrusion processing. Typical products include carpet backing, woven bags, and twine. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H03W-01 is a homopolymer polypropylene specifically designed for fiber applications which require low-water-carryover characteristics coupled with good melt and thermal stability in the finished product. Typical applications for H03W-01 include cordage, carpet backing, industrial fabrics, and geotextiles. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H03W-02 is a general purpose polypropylene homopolymer with a low water carryover additive package. It is designed for extrusion applications including carpet backing, fiber and tape, rope and cordage, fiber bags, and twine. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520

Grade H05A-01 is an antistatic polypropylene homopolymer designed for use in injection molding and extrusion applications. Typical applications are consumer products, housewares, medical packaging, and rigid packaging. This grade has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration specified in 21 CFR 177.1520.

Grade H05H-01 is a homopolymer polypropylene designed for use in injection molding applications requiring high temperature resistance. H05H-01 has excellent long-term heat aging stability and superior extraction resistance in hot aqueous solutions, making it an excellent candidate for use in washing machines, dishwashers, coffee makers, other appliances, and automotive applications. This grade has been recognized by UL for sustained use at 130 C, meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520 and is Drug Master File listed. This product is not recommended for taste or odor sensitive applications.

Grade H07G-00 is a barefoot polypropylene homopolymer designed for cast film applications and flexible packaging. This grade has good optical properties and consistent processing. This grade meets the requirements of the U.S. Food and Drug Administration specified in 21 CFR 177.1520.

H07N-00 is a nucleated homopolymer polypropylene designed for extrusion processing. Typical applications include cast film with higher stiffness requirements; cast film for hot-pack cheese applications, and flexible packaging. Performance of this resin can be customized by the addition of technical additives such as slip or anti-block by the film manufacturer. This resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H08U-00 is a polypropylene homopolymer designed for fiber spinning applications that need UV protection. This resin meets the requirements of the U.S. Food and Drug administration as specified in 21 CFR 177.1520.

H12E-00 is an antistated homopolymer polypropylene designed for use in general purpose injection molding and extrusion applications. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H12G-00 is a homopolymer polypropylene designed for use in general purpose injection molding applications. Typical applications include consumer products, housewares and rigid packaging. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H12G-01 is a homopolymer polypropylene designed for use in general purpose injection molding and extrusion applications. Typical applications include housewares, rigid packaging, caps and closures and film and sheet. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H12Z-00 is a nucleated and antistatic polypropylene homopolymer designed for injection molding applications such as caps and closures, consumer products, furniture, housewares, and rigid packaging. The grade benefits from fast cycle times, high stiffness, and low static charge. This material has been recognized by UL as flame class HB and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H12Z-02 is a nucleated and antistatic polypropylene homopolymer designed for general purpose injection molding applications that require superior mold release properties. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H12Z-03 is a nucleated homopolymer polypropylene that also contains an antistat and a lubricant to provide optimal balance between processing and surface appearance. It is designed for general purpose injection molding. Typical applications include consumer products and rigid packaging. It meets the requirements of the U.S. Food and Drug Administration as specified in 21CFR 177.1520.

H13M-00 is a medium-term heat aging polypropylene homopolymer designed for injection molding applications such as automotive parts, appliances and medical and rigid packaging. This grade benefits from a good retention of physical properties when exposed to higher in-service temperatures over an extended period of time, even following hot-water extraction. This material has been recognized by UL for sustained use at 100°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H14A-00 is an antistatic polypropylene homopolymer designed for injection molding applications such as consumer products, housewares, medical packaging, and rigid packaging. The grade benefits from fast cycle times, high flow rate, and a low static charge. This material has been recognized by UL for sustained use at 65 C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H17U-00 is a polypropylene homopolymer designed for carpet fiber applications. Other typical applications include BCF, POY, and staple fibers that require UV stability. This resin meets the requirements of the U.S. Food and Drug Administration specified in 21 CFR 177.1520.

H19G-01 is a homopolymer polypropylene designed for the extrusion of continuous filament yarn, continuous bulked filament yarn and staple fiber. Its benefits include consistent processing, color stability, and excellent spinning characteristics. H19G-01 meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H20A-00 is a controlled rheology homopolymer designed for injection molding applications requiring a moderate level of antistatic agent. Typical applications include consumer products, housewares and rigid packaging. It meets the requirements of the U.S. Food and Drug Administration as specified in 21CFR 177.1520.

H20E-00 is a controlled rheology homopolymer polypropylene containing a high level of antistat designed for injection molding applications that require improved processability and enhanced mold release. Typical applications include caps and closures and thin wall containers. It meets the requirements of the U.S. Food and Drug Administration as specified in 21CFR 177.1520.

H20H-00 is a homopolymer polypropylene designed for use in injection molding applications requiring high temperature resistance. H20H-00 has excellent long-term heat aging stability and superior extraction resistance in hot aqueous solutions making it an excellent candidate for use in washing machines, dishwashers, coffee makers, other appliances, automotive and compounding applications. This grade has been recognized by UL for sustained use at 130 C, meets the requirements of the U.S. Food and Drug Administration as speci?ed in 21 CFR 177.1520. This product is not recommended for taste or odor sensitive applications.

H20Z-00 is a nucleated and antistatic polypropylene homopolymer for applications in injection molding, consumer products, housewares, and rigid packaging. This grade has easy moldability, fast cycle times, improved stiffness, and low static charge. This grade has been recognized by UL and meets the requirements of the U.S. Food and Drug Administration specified in 21 CFR 177.1520.

H28E-00 is an antistated, controlled rheology polypropylene homopolymer designed for injection molding applications that require improved impact characteristics. It meets the requirements of the U.S. Food and Drug Administration as specified in 21CFR 177.1520.

H35G-02 is a general purpose homopolymer designed for injection molding applications. Typical applications include consumer products, housewares, and rigid packaging. Benefits include easy moldability and fast cycles at low processing temperatures. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H35Z-00 is a high flow rate, nucleated and antistated homopolymer designed for injection molding applications. Typical applications include consumer products, housewares, medical components and thin-walled rigid packaging. Benefits include high flow rate, fast cycle times, good molding performance in thin-wall parts, low static charge and improved toughness. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H38G-02 is a homopolymer polypropylene designed for general purpose injection molding, compounding, and high speed spinning applications. In addition to general purpose injection molding applications, it is used for the production of spun bonded nonwovens and partially oriented yarn (POY). H38G-02 exhibits excellent gas fade resistance and its narrow molecular weight distribution results in excellent processability and high line speeds. This grade meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

H44N-00 is a high flow rate, nucleated polypropylene homopolymer designed for compounding and injection molding applications. The grade benefits from a high stiffness and isotropic shrinkage to help reduce warping in flat, thin parts.

H53N-00 is a high flow rate nucleated and lightly lubricated homopolymer polypropylene designed for high-speed injection molding of thin-walled parts requiring good stiffness and fast cycle times. Typical applications are: media packaging, consumer products, housewares, and thin-wall rigid packaging and food service items. This grade meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

L10G-00 is a medium melt flow rate, barefoot impact copolymer polypropylene designed for injection molding, compounding applications, and consumer products. Characteristics of this grade include high impact resistance and high flexural modulus. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

L12N-00 is a medium melt flow rate, nucleated impact copolymer polypropylene for injection molding and compounding applications. It is especially formulated for high impact resistance, high flexural modulus, and excellent gloss. Applications include automotive, consumer products, housewares, and compounding. This material meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

L12Z-00 is a nucleated, antistated impact copolymer with an excellent balance of high stiffness, good impact and fast injection cycles intended for use in the production of consumer products, appliances, office furniture, toys and juvenile products. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.

L12Z-01 is a nucleated, antistated polypropylene impact copolymer with an excellent balance of stiffness and impact and fast injection cycles. It is specially formulated to help provide superior gloss in applications such as consumer products, housewares, and toys. This material has been recognized by UL for sustained use at 65°C and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520.