High impact grade for general purpose mouldings.

High gloss grade for mouldings such as appliances requiring an aesthetic finish. UL Listed.

Easy flow grade for automotive pillar trims. High level of scratch resistance.

Special mixed mineral grade for those applications requiring the highest gloss levels. High heat resistance. UL listed.

High impact, high stiffness compound.

PPK 1060 is a low flow Polypropylene homopolymer. PPK 1060 is suitable for extrusion of pipe, film and tape, as well as the production of blown bottles for fruit juice and pharmaceutical use. Suitability for use in any application should be determined by appropriate performance testing. PPK 1060 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPK 2032 is a low flow, excellent impact and toughness grade of Polypropylene copolymer. PPK 2032 is intended for use where good physical properties are required in areas such as blown containers, thermoformed sheet, produce crates and automotive applications. Suitability for use in any application should be determined by appropriate performance testing. PPK 2032 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPK 4132 is a high heat stabilised, low flow grade of Polypropylene copolymer exhibiting excellent toughness. PPK 4132 is intended for high heat situations in both automotive and domestic white good applications. The heat ageing resistance of PPK 4132 is greater than 1000 hours when tested at 150 o C in an air circulating oven. Suitability for use in any application should be determined by appropriate performance testing. PPK 4132 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPN 1060F is a medium to low flow, high impact grade of Polypropylene homopolymer. PPN 1060F is typically used in applications such as lashing, bottles and thermoformed food containers. Suitability for use in any application should be determined by appropriate performance testing. PPN 1060F is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPN 2033 is a low flow, excellent impact and toughness grade of Polypropylene copolymer. PPN 2033 is intended for use where good physical properties are required in areas such as blown containers, thermoformed sheet, produce crates and automotive applications. Suitability for use in any application should be determined by appropriate performance testing. PPN 2033 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPR 1060F is a medium flow, high tenacity extrusion grade of Polypropylene homopolymer. PPR 1060F is typically used for production of stretched weaving tapes, bailer twine and industrial lashings. Suitability for use in any application should be determined by appropriate performance testing. PPR 1060F is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPT 1070 is a medium flow injection grade of Polypropylene homopolymer. PPT 1070 is normally used for the production of housewares, garden furniture, caps, closures and drinking straws. Suitability for use in any application should be determined by appropriate performance testing. PPT 1070 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPR 2042 is a medium flow grade of Polypropylene copolymer. PPR 2042 is suitable for injection moulding of crates, tote boxes, domestic appliances and automotive applications. Suitability for use in any application should be determined by appropriate performance testing. PPR 2042 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPT 1052 White 24 is a medium flow Polypropylene Copolymer. It contains a slip additive to aid in ejection. PPT 1052 White 24 is suitable for applications requiring good impact strength which may be difficult to eject when moulded from unlubricated grades. Suitability for use in any application should be determined by appropriate performance testing. PPT 1052 White 24 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPT 1070 is a medium flow injection grade of Polypropylene homopolymer. PPT 1070 is normally used for the production of housewares, garden furniture, caps, closures and drinking straws. Suitability for use in any application should be determined by appropriate performance testing. PPT 1070 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPT 2052 is a medium flow impact utility grade of Polypropylene copolymer. PPT 2052 is suitable for a wide range of applications including automotive and housewares. Suitability for use in any application should be determined by appropriate performance testing. PPT 2052 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPU 1080 is a high flow injection moulding grade of Polypropylene homopolymer with high flow and high stiffness. PPU 1080 is intended for use in the manufacture of closures, housewares and food containers. Suitability for use in any application should be determined by appropriate performance testing. PPU 1080 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPV 1762 is a very high flow, low distortion grade of Polypropylene copolymer. PPV 1762 is intended for thin walled food containers and automotive applications. Suitability for use in any application should be determined by appropriate performance testing. PPV 1762 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPV 1780 is a high flow injection moulding grade of Polypropylene homopolymer. PPV 1780 is usually used to produce closures, thin walled mouldings and food containers. Suitability for use in any application should be determined by appropriate performance testing. PPV 1780 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPV 2753 is an improved impact very high flow, low distortion grade of Polypropylene copolymer. PPV 2753 is suitable for thin-walled, automotive and food packaging applications. Suitability for use in any application should be determined by appropriate performance testing. PPV 2753 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPV 2762 is a very high flow, low distortion grade of Polypropylene copolymer with added thermal stabilisation allowing the compound to meet the automotive specifications of 500 hours at 150 o C. PPV 2762 is suitable for automotive and general industrial applications. Suitability for use in any application should be determined by appropriate performance testing. PPV 2762 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPW 1762 is an ultra high flow, Polypropylene copolymer. PPW 1762 enables fast cycling of thin walled food containers and flower pots. Suitability for use in any application should be determined by appropriate performance testing. PPW 1762 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.

PPW 1780 is an ultra high flow, low distortion grade of Polypropylene homopolymer with high flow and high stiffness. PPW 1780 is intended for the production of thin walled food containers yielding high clarity and stiffness. Suitability for use in any application should be determined by appropriate performance testing. PPW 1780 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.