Profax 6231N is a high melt flow homopolymer with a narrow molecular weight distribution designed for spundbond and continuous filament applications that require superior spinnability and finer fibers. This product can be used for thin-wall injection molding. Profax 6231N is available in pellet form. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Controlled molecular weight distribution - High melt flow for short injection cycles - Good processing stability - Excellent dimensional stability - Excellent stability for high speed fiber spinning Typical Applications: - Thin-wall injection - Caps - Fiber extrusión - Continuous filament

Pro-fax 6301 polypropylene homopolymer is available in spherical particle form. This resin is typically used for mixing with pigments and other additives to make polymer concentrates or masterbatches. Pro-fax 6301 has very minimal stabilization, which allows wide design latitude for compounders. Additional stabilization is required to protect the resin during melt processing and throughout its useful life. For regulatory compliance information see Pro-fax 6301 Product Stewardship Bulletin (PSB). Please note that any additives compounded into this resin will require a re-assessment of its FDA status.

Pro-fax 6323 general purpose polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 6323. For regulatory compliance information see Pro-fax 6323 Product Stewardship Bulletin (PSB).

Pro-fax 6329 polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications and offers good resistance to aging at elevated temperatures in both wet and dry environments. For regulatory compliance information see Pro-fax 6329 Product Stewardship Bulletin (PSB).

Pro-fax 6331 general purpose polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications. For regulatory compliance information see Pro-fax 6331 Product Stewardship Bulletin (PSB).

Pro-fax 6331NW nucleated, easy molding polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications. For regulatory compliance information see Pro-fax 6331NW Product Stewardship Bulletin (PSB).

Profax 6431 is a general purpose homopolymer designed for extrusion of mono-oriented film (cast film); it does not contain slip and antiblock and exhibits good organoleptic properties, good stiffness and good clarity. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good processing stability - Good Stiffness - Good organoleptic properties - Good clarity Typical Applications: - Cast films - Closures - Injection

Pro-fax 6523 general purpose polypropylene homopolymer resin is available in pellet form. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 6523. For regulatory compliance information see Pro-fax 6523 Product Stewardship Bulletin (PSB).

Pro-fax 6524 polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications and offers very good resistance to aging at elevated temperatures in both wet and dry environments. For regulatory compliance information see Pro-fax 6524 Product Stewardship Bulletin (PSB).

Pro-fax 7523 impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers good cold temperature impact resistance. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 7523 For regulatory compliance information see Pro-fax 7523 Product Stewardship Bulletin (PSB).

Pro-fax 7531 impact polypropylene copolymer is available in pellet form. This resin is typically used injection molding and extrusion applications and offers good cold temperature impact resistance For regulatory compliance information see Pro-fax 7531 Product Stewardship Bulletin (PSB).

Pro-fax 7624 impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers a very good stiffness/impact balance as well as an excelllent resistance to aging at elevated temperatures in both wet and dry environments. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 7624 For regulatory compliance information see Pro-fax 7624 Product Stewardship Bulletin (PSB).

Pro-fax 7823 fractional melt flow polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications and offers high melt strength and excellent impact resistance. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 7823 For regulatory compliance information see Pro-fax 7823 Product Stewardship Bulletin (PSB).

Pro-fax 8523 very high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion or injection molding applications and offers excellent low temperature impact resistance. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 8523. For regulatory compliance information see Pro-fax 8523 Product Stewardship Bulletin (PSB).

Pro-fax 8623 very high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion and injection molding applications and offers excellent cold temperature impact resistance. An ASTM and ISO-based versions of the technical datasheet are available for Pro-fax 8623 For regulatory compliance information see Pro-fax 8623 Product Stewardship Bulletin (PSB).

Pro-fax EP315J low melt flow, electrical grade polypropylene copolymer resin has outstanding toughness, flex-life and abrasion resistance. This resin demonstrates good processing behavior and is tailored for trouble-free production of primary cable insulation, especially filled telephone cable because its unique stabilizer system resists extraction by petroleum-jelly base filling compounds. Because of its ease of processing and resultant low operating pressures, Pro-fax EP315J resin keeps wire draw to a minimum and consequently has been the preferred resin for 24 and 26 AWG wire. Typical applications include telephone singles and general primary insulation. For regulatory compliance information see Pro-fax EP315J Product Stewardship Bulletin (PSB).

Pro-fax EP348T high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good cold temperature impact resistance. For regulatory compliance information see Pro-fax EP348T Product Stewardship Bulletin (PSB).

Pro-fax EP349U high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good low temperature impact resistance. For regulatory compliance information see Pro-fax EP349U Product Stewardship Bulletin (PSB)

Pro-fax EP390P high impact polypropylene copolymer is available in pellet form. This resin has minimal stabilization, which allows wide design latitude for the compounder. Additional stabilization is required to protect the resin during melt processing and throughout its useful life. For regulatory compliance information see Pro-fax EP390P Product Stewardship Bulletin (PSB).

Pro-fax EP390S high impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers excellent cold temperature impact resistance. For regulatory compliance information see Pro-fax EP390S Product Stewardship Bulletin (PSB).

Pro-fax EP424E fractional melt flow polypropylene copolymer is available in pellet form. This resin is selected by customers for use in extrusion applications such as blown film and offers high melt strength and excellent impact resistance.

Pro-fax EP445P fully formulated impact polypropylene copolymer is available in pellet form. This resin is typically used in injection molding applications and offers excellent cold temperature impact resistance and stiffness/impact balance. For regulatory compliance information see Pro-fax EP445P Product Stewardship Bulletin (PSB).

Pro-fax EP494T polypropylene is available in pellet form. This resin is typically used in injection molding applications.

Pro-fax EP501V high flow, impact polypropylene copolymer is available in pellet form. This resin is typically used in compounding applications. For regulatory compliance information see Pro-fax EP501V Product Stewardship Bulletin (PSB).

Pro-fax EP545U high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good stiffness/impact balance. For regulatory compliance information see Pro-fax EP545U Product Stewardship Bulletin (PSB).

Pro-fax EP549U high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good stiffness/impact balance. For regulatory compliance information see Pro-fax EP549U Product Stewardship Bulletin (PSB).

Pro-fax EP611H high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications and offers very good low temperature impact resistance. For regulatory compliance information see Pro-fax EP611H Product Stewardship Bulletin (PSB).

Pro-fax EP644V very high melt flow impact polypropylene copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers excellent stiffness. For regulatory compliance information see Pro-fax EP644V Product Stewardship Bulletin (PSB).

Pro-fax EP713H nucleated high impact polypropylene copolymer is available in pellet form. This resin is typically used in extrusion applications such as thermoforming, blow molding, and sheet extrusion. For regulatory compliance information see Pro-fax EP713H Product Stewardship Bulletin (PSB).

Pro-fax HP403G is a general purpose homopolymer with good heat resistance. It is available in pellet form, and it is typically used in extrusion applications. For regulatory compliance information see Pro-fax HP403G Product Stewardship Bulletin (PSB).

Pro-fax HP423M controlled rheology polypropylene homopolymer is available in pellet form. This resin is typically used in cast film applications. It is formulated wtih slip additive. For regulatory compliance information see Pro-fax HP423M Product Stewardship Bulletin (PSB).

Pro-fax HP525J is a polypropylene homopolymer typically used in the production of biaxially oriented polypropylene films (BOPP). The product is suitable for metallizable film, both as monolayer and in coextruded structures. It contains a standard processing stabilization but does not contain any slip, antiblocking agents and no Calcium Stearate is intentionally added. Pro-fax HP525J offers good optical, easy processing and very good film profile. Typical applications are BOPP packaging films and Solid Phase Thermoforming sheets. For regulatory compliance information, see Pro-fax HP525J Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS). To obtain copies of these documents, please contact your LyondellBasell product safety representative.

Profax HP530L is a polypropylene homopolymer that contains a slip agent. HP530L presents good processability and is suitable for injection molding. Profax HP530L is used for caps and closures and is available in pellet form. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520. Features: - Good processability - With slip agent Typical Applications: - Injection - Caps and closures - Toiletries - Dispensing systems

Pro-fax HP553J is a low water carryover raffia and tape grade polypropylene homopolymer resin with a nominal MFR target of 3.5 g/10 min and good tensile strength. It is available in pellet form and is typically used in extrusion applications, including raffia, strapping, tapes, rope, twine and cordage. For regulatory compliance information, see Pro-fax HP553J Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS).

Pro-fax HP793R is a polypropylene homopolymer nucleated for faster cycle times. It contains anti-stat and is available in pellet form. This resin is typically used in injection molding applications such as caps and closures, containers and housewares. For regulatory compliance information, see Pro-fax HP793R Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS).

KF6100 is a polypropylene homopolymer. With its broad molecular weight distributiion and standard additive package, it is quite suitable for film extrusion on Stenter and Double Bubble lines. Potential end use applications include monolayer and coextruded BOPP film, foodstuff packaging, flower wrapping, paper lamination and even textiles.

KF6190H is a polypropylene homopolymer. With its specially controlled rheology, excellent optical properties and outstanding thickness profile it is quite suitable for film extrusion on high performance Teneter process lines. Potential end use applications include monolayer, multi-layer, coextruded or laminated BOPP film, foodstuff packaging, flower wrapping, paper lamination and even textiles.

Pro-fax PD702 polypropylene homopolymer is available in pellet form. This resin is typically used in injection molding applications. For regulatory compliance information see Pro-fax PD702 Product Stewardship Bulletin (PSB).

Pro-fax PD702NW nucleated polypropylene homopolymer resin is available in pellet form. This resin is typically used in injection molding applications and offers excellent processability. For regulatory compliance information see Pro-fax PD702NW Product Stewardship Bulletin (PSB). Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical (P & AD) and Business contacts first.