ISPLEN® PB 130 G1F is a heterophasic copolymer with medium-low fluidity designed for extrusion applications. It has good processability and high mechanical properties especially high impact strength, even at low temperatures. ISPLEN® PB 130 G1F can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS In extrusion and blow-moulding processes, such as: - Films and sheets with a good surface gloss - Pipes - Blow- moulding Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 130 G1M is a heterophasic copolymer with high molecular weight designed for injection moulding applications where extremely high impact, even at low temperatures, is necessary in addition with good processability. Among other technical advantages, ISPLEN® PB 130 G1M offers: - Production of articles with extra high toughness as a main requirement. - Good stiffness. - Because of its better stackability and stress cracking resistance, it can replace HDPE. TYPICAL APPLICATIONS ISPLEN® PB 130 G1M is particularly intended for articles which primary requirement is very high toughness: industrial handling or packaging, houseware and garden containers, luggage, toolboxes, professional organizers and maintenance systems, pallets, crates and disposal containers. Also is suitable for technical components: toys, sports (bikes or sky equipment), leisure goods, automotive, fittings for pressure/non pressure pipes, parts of domestic appliances, etc. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 140 G2M is a heterophasic copolymer with medium-low fluidity designed for injection moulding applications where very high impact properties, even at low temperatures, is necessary combined with good procesability. Among other technical advantages, ISPLEN® PB 140 G2M offers: - Production of items exposed to heavy loads that needs high toughness. - Good flow properties enable to fill complex moulds. TYPICAL APPLICATIONS Due to its excellent balance of properties some of the major applications of ISPLEN® PB 140 G2M are consumer goods as industrial handling or packaging containers, housewares and indoor furniture, suitcases and boxes with living hinge (i.e. tool boxes). Also is suitable for technical components: toys, sports equipment, leisure goods, automotive, pallets, crates and pails. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Isplen® PB 141 G2M is a low-medium fluidity heterophasic copolymer with specific structural modifications intended for injection moulding applications that combine a very high impact strength, moderate stiffness and good processability. Among other technical advantages Isplen® PB 141 G2M offers: - Highly suitable for manufacturing of articles with high strength at very low temperatures. - Easy flow enables to fill moulds with complex geometry or big articles that is not common in a grade with this melt flow rate. - Low warpage and high dimensional stability. TYPICAL APPLICATIONS Isplen® PB 141 G2M characteristics performs a grade particularly designed for technical components and containers exposed to heavy loads: heavy duty crates, suitcase shells, professional organizers, automotive components, extra high impact battery boxes and industrial components (sports, leisure, packaging...)

ISPLEN® PB 141 N2M is a low-medium fluidity heterophasic copolymer with specific structural modifications intended for injection moulding applications that combines very high impact strength, even at low temperatures, and high stiffness and good processability. Among other technical advantages ISPLEN® PB 141 N2M offers: - Highly suitable for manufacturing of articles with high strength at very low temperatures. - Easy flow enables to fill moulds with complex geometry or big articles that is not common in a grade with this melt flow rate. - Low warpage and high dimensional stability. TYPICAL APPLICATIONS ISPLEN® PB 141 N2M characteristics performs a grade particularly designed for technical components and containers exposed to heavy loads: heavy duty crates, suitcase shells, professional organizers, automotive components, extra high impact battery boxes and industrial components (sports, leisure, packaging...) Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 141 U5M is a low-medium fluidity heterophasic copolymer with specific structural modifications Intended for injection moulding applications that combines very high impact strength, even at low temperatures, and high stiffness and good processability. It is UV stabilized to be used in exterior applications. Among other technical advantages ISPLEN® PB 141 U5M offers: - Highly suitable for manufacturing of articles with high strength at very low temperatures. - Easy flow enables to fill moulds with complex geometry or big articles that is not common in a grade with this melt flow rate. - Low warpage and high dimensional stability. TYPICAL APPLICATIONS ISPLEN® PB 141 U5M characteristics performs a grade particularly designed for technical components and containers exposed to heavy loads: heavy duty crates, suitcase shells, professional organizers, automotive components, extra high impact battery boxes and industrial components (sports, leisure, packaging...) Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 150 G1F is a medium fluidity heterophasic ethylene-propylene copolymer characterised by its good balance of properties: excellent impact strength, even at low temperatures, good stiffness, low gel level, good clarity films and easy processability. The particular characteristics of ISPLEN® PB 150 G1F offer a multi-purpose grade largely used in the consumer, packaging and a wide variety of appliance industries. TYPICAL APPLICATIONS Non oriented film extrusion processes, cast or tubular quench: - Single layer films - Core-layer in co-extruded cast films - Packaging of foodstuffs and non-food stuffs - Stationery packaging Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 150 G2M is a medium fluidity heterophasic copolymer characterised by its good balance of properties: excellent impact strength, even at low temperatures, good stiffness and easy processability. Due to its excellent flow properties is very suitable to fill complex or large moulds with long flow paths. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 150 G2M offers a multi-purpose grade used for packaging and in a wide variety of appliance industries. Typical applications are: - Crates, containers, pails and buckets for domestic and industrial uses. - Tool boxes and organizers with integral hinge. - Battery boxes and other automotive components. - Appliance industries: stadium seats, flooring slats, farm equipments, toys, sports... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

NEW ISPLEN® PB154M1F is a medium melt flow rate heterophasic polypropylene, especially developped for films with a high impact strenght even at low temperatures. Its special structural characteristics provide it high impact strength, good processability, high tear strength and better optical properties than convencional heterophasic copolymers. Additionally, this grade includes both antiblock and slip agents. APPLICATIONS. Non oriented film extrusion where high impact and tear strength are essential: - Single layer films / Core-layer in co-extruded cast films - Packaging of foodstuffs and non-food stuffs Its recommended melt temperature range goes from 190 to 250°C. Processing conditions may be optimised for each production line.

ISPLEN® PB 170 G1F is a medium-high fluidity heterophasic copolymer characterised by its good balance of properties. It is characterised by good balance of properties: High stifness, good impact strength even at low temperatures, low gel level, good clarity films and easy processability. Also its particular characteristics offer a multi-purpose grade largely used in the consumer, packaging and a wide variety of appliance industries. TYPICAL APPLICATIONS Non oriented film extrusion processes, cast or tubular quench: - Single layer films - Core-layer in co-extruded cast films - Packaging of foodstuffs and non-food stuffs - Stationery packaging Recommended melt temperature range from 190 to 230°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 170 G2M is a medium-high fluidity heterophasic copolymer characterised by its good balance of properties. Its molecular structure determines low viscosity and very good flow that permits to fill complex or large moulds with long flow paths obtaining short cycle times and an excellent balance of impact strength and high stiffness to allow the manufacturing of thin-walled articles with good mechanical resistance. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 170 G2M offer a multi-purpose grade intended for use in applications in which high mechanical properties are appreciated in addition with good processability: - Domestic and leisure furniture. - Square boxes and round storage containers for consumer appliances. - Lids, caps and closures. - Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN PB171H is a copolymer with high melt flow rate, high stiffness, even at low temperatures and good processability. This product is available in black color. APPLICATIONS - Automotive: under bonnet parts and colour savers. - Technical pieces, in general. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 171 H1M is a medium-high fluidity heterophasic copolymer with specific molecular structure intended for injection moulding applications that combines very high impact strength, even at low temperatures and excellent processability. Other technical advantages of ISPLEN® PB171H1M are: - Highly suitable for manufacturing of articles with very high impact strength at low temperatures. - Low viscosity that enables to fill moulds with complex geometry, big articles or long flow paths. - Low warpage and high dimensional stability. TYPICAL APPLICATIONS Particular characteristics of ISPLEN® PB171H1M performs a grade widely used for technical components, transport systems and storage equipment: crates, suitcase shells, professional storage solutions, automotive components, battery boxes, buckets, waste and disposal management systems, industrial components (sports, leisure, electrical...) Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 176 N4M is a nucleated heterophasic copolymer that combines the impact strength of a conventional copolymer with the high stiffness level of a homopolymer as well as an excellent processability. At the same time, it exhibits a higher crystallisation temperature and a low shrinkage tendency. ISPLEN® PB 176 N4M clearly outperforms standard products and allows the same application performance with a potential cost reduction for finished articles due to: - Potential reduction of wall thickness. - Shorter cooling time: higher mould opening temperatures. - Can replace mineral filled or blends among polypropylenes. TYPICAL APPLICATIONS ISPLEN® PB 176 N4M performance profile expands the final application to broad and diverse goods: packaging (cylindrical containers for paints, leisure chemicals, pool maintenance products), food rounded containers, baskets, garden furniture, flowerpots, toys, trays and technical items for domestic appliances or automotive industries. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 180 A4M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and by its good balance of mechanical properties: impact strength and stiffness. It is particularly suitable for injection moulding applications of thin walled articles. The material also shows very low tendency to warp and it is used in goods where dimensional stability is important. ISPLEN® PB 180 A4M is formulated with a specific additive package to permit the dispersion of static charges accumulated on the article surface avoiding anti-aesthetic dust deposits during storage or exhibition. Additive package also facilitates material processing, reduces internal stresses and makes it easier to extract the pieces from the mould. TYPICAL APPLICATIONS The specific characteristics of ISPLEN® PB 180 A4M are particularly suitable for applications requiring excellent processability and good aesthetic appearance: - Domestic and leisure furniture. - Thin-walled boxes and round storage containers for exhibiting food products or consumer goods. - Industrial components: toys, sports, household appliances, storage organizers... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 180 G2M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and by its good balance of mechanical properties: impact strength and stiffness. It is particularly suitable for injection moulding applications of thin walled articles. The material also shows very low tendency to warp and it is used in goods where dimensional stability is important. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 180 G2M permit a grade intended for use in applications where good proccesability is appreciated in addition with good mechanical properties: - Domestic and leisure furniture. - Square boxes and round storage containers for consumer appliances. - Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed... - Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 181 N2M is a high fluidity heterophasic copolymer characterised by its good balance of stiffness and impact properties. Due to the nucleating agents it contains, PB181N2M has high stiffness. In addition, the grade shows good impact properties and good processability. ISPLEN® PB181N2M is formulated with a specific additivation to facilitate the dispersion of static charges accumulated on the article surface and avoid anaesthetic dust patterns during storage or exhibition. Among other technical advantages ISPLEN® PB 181 N2M offer: - Highly suitable for manufacturing of articles with good impact properties and a high melt flow rate. - Easy flow enables to fill moulds with complex geometry or big articles. - Low warpage and high dimensional stability. TYPICAL APPLICATIONS ISPLEN® PB 181 N2M characteristics perform a grade particularly designed for applications which main requirement is a good balance between mechanical properties and where good impact properties are needed in a grade of high melt flow rate. Some examples of these applications could be: pails and lids, technical components and containers as heavy duty crates, suitcase shells, professional organizers and automotive components. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 182 G2M is a high fluidity heterophasic copolymer characterised by its excellent flow properties and good balance of mechanical properties, very high impact strength, even at low temperatures and high stiffness. It is particularly intended for injection moulding applications used in the manufacture of thin wall articles. Also, the material has a very low tendency to warp and it is used in goods where dimensional stability is important. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 182 G2M make it suitable for applications in which very high impact strength at high fluidity is required as well as good proccesability: - Domestic and leisure furniture. - Square boxes and round storage containers for consumer appliances. - Trays and containers for cold storage of foodstuffs: ice creams, fresh vegetables, fruit processed... - Industrial components: toys, sports, leisure, automotive, storage organizers, packaging... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Isplen® PB 186 N4M is a heterophasic polypropylene copolymer with a superior molecular architecture that combines the impact strength of a conventional block copolymer with the stiffness level of a homopolymer and excellent processability. At the same time, exhibits a higher crystallisation temperature due to controlled chain packaging. Isplen® PB 186 N4M provides excellent flow properties, very high stiffness and good impact strength. Outperforms traditional block copolymers with a potential source of cost reduction for finished articles: - It does a potential reduction of wall thickness. - Reduce cooling times: higher mould opening temperatures and shorter cycles. - Can replace mineral filled or blends among polypropylenes. TYPICAL APPLICATIONS Isplen® PB 186 N4M is highly suitable to fill moulds with long flow lengths or thin walled articles that demands good dimensional stability together with good impact requirements: packaging, food containers, baskets, garden furniture, leisure goods, flowerpots, toys, storage boxes, trays for fast food, technical items for domestic appliances, automotive, electronic and hardware industries...

ISPLEN® PB 190 K2M is a very high fluidity heterophasic copolymer characterised by its excellent flow properties and a good balance of mechanical properties: good impact strength and high stiffness. It is suitable for injection moulding applications in the manufacture of very thin wall articles ISPLEN® PB 190 K2M provides a tailored molecular structure allowing to the articles exhibit a low tendency to warp, excellent flow, high dimensional stability and easy demoulding, reaching faster cycle times. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 190 K2M permit the manufacture of articles that combine good toughness, excellent processability and good dimensional stability. It is widely used in: - Domestic and leisure furniture. - Square boxes and round storage containers for consumer appliances. - Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products... - Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 195 K3M is a very high fluidity heterophasic copolymer intended for injection moulding applications. It is characterised by its very high stiffness and excellent impact properties in a grade with a high melt flow index value. It is a nucleated grade and, in addition, its special antistatic formulation provides good long-term aesthetic appearance and easy demoulding, allowing to achieve faster cycle times. TYPICAL APPLICATIONS The particular characteristics of ISPLEN® PB 195 K3M provide a grade with excellent balance of mechanical properties with very high stiffness and excellent impact properties, as well as a good dimensional stability. It is widely used in: - Pails - Domestic and leisure furniture. - Square boxes and round storage containers for consumer appliances. - Thin-walled containers for exhibiting food products: ice creams, fast food, dairy products... - Flowerpots, buckets, storage organizers, waste containers, trays... Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 199 A3M is a very high fluidity heterophasic copolymer characterised by its excellent flow properties and good balance of mechanical properties, impact strength and high stiffness. It is particularly suitable for injection moulding applications used in the manufacture of very thin walled articles. ISPLEN® PB 199 A3M provides a specific molecular structure that allows the articles made with PB 199 A3M exhibit a low tendency to warp, ultra light flow and high dimensional stability. Antistatic additive package also facilitates material processing, reduces internal stresses and makes the articles extraction from the mould easier reaching high cadence of production. TYPICAL APPLICATIONS The specific characteristics of ISPLEN® PB 199 A3M are particularly suitable for applications requiring good toughness, excellent processability and dimensional stability. It is widely used in very thin-walled articles as: - Containers for exhibiting food products: ice creams, dairy products... - Trays, boxes, cups and rounded containers for processed food. - Flowerpots, buckets, waste containers, lids, caps, cosmetic flasks... - Video boxes. Cases for DVD, CD-R, CD-RW and optical storage systems. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 300 A3M is a very high fluidity and nucleated heterophasic copolymer characterised by its excellent flow properties and good balance of mechanical properties, impact resistance and high stiffness. It is particularly suitable for injection moulding applications used in the manufacture of very thin walled articles. Articles made with ISPLEN® PB 300 A3M exhibit a low tendency to warp, ultra light flow and high dimensional stability. Antistatic additive package also facilitates material processing and makes the articles extraction from the mould easier reaching shorter cycle times. TYPICAL APPLICATIONS The specific characteristics of ISPLEN® PB 300 A3M are particularly suitable for applications with very thin-walled articles as: - Containers for exhibiting food products: ice creams, dairy products... - Trays, boxes, cups and rounded containers for processed food. - Flowerpots, buckets, waste containers, lids, caps, cosmetic flasks... - Video boxes. Cases for DVD, CD-R, CD-RW and optical storage systems. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB110H2E is a high melt viscosity propylene heterophasic copolymer with a reinforced formulation designed for extrusion process. Due to their good flow and outstanding mechanical properties it is suitable to be processed into pipes and its good flexural modulus is specially intended for extrusion of doubled corrugated drainage and sewage pipes The ISPLEN® PB110H2E characterized by high impact strength at low temperatures and stress cracking resistance assure the good performance of this material under critical conditions. It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS - Structured doubled wall pipes for underground drainage and sewage without pressure. - Corrugated pipes in general. Recommended melt temperature range from 205-225 °C. Processing conditions should be optimised for each production line. ISPLEN® PB 110 H2E is a very low melt flow propylene heterophasic copolymer with a reinforced formulation for extrusion processes, and a high thermal stabilisation. His crystalline structure gives a high rigidity and very high tensile strength resistance. Its flow characteristics and mechanical properties make it specially adapted for high thickness and good superficial shine extrusion products It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS In extrusion process that may require high melt viscosity and particularly high tensile properties, such as: - Boards and Profiles - Blow-molding - Sheet extrusion with high superficial shine. - Pipes. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PB 131 N5E is a heterophasic copolymer with medium-low fluidity designed for extrusion applications. It has good processability and high mechanical properties especially high impact strength, even at low temperatures. ISPLEN® PB 131 N5E can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. It has a very high impact resistance. TYPICAL APPLICATIONS In extrusion and blow-moulding processes, such as: - Films and sheets with a good surface gloss and high impact resistance - Pipes Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line. ISPLEN® PB131N5E is a propylene heterophasic copolymer with high melt viscosity. The good flow and outstanding mechanical properties make this material suitable to be processed into monolayer corrugated pipes. Due to its high impact strength at low temperatures is specially intended for protecting cable conduits It can be easily coloured during the extrusion process using the right pigments, preferably in the form of concentrates with a higher melt flow rate than the base polymer. TYPICAL APPLICATIONS - Monolayer corrugated pipes for protecting cable conduits Recommended melt temperature range from 205 to 225 °C. Processing conditions should be optimised for each production line.

ISPLEN® PC172AV is a copolymer compound with 15% calcium carbonate and high melt flow rate.It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilised and antistatic formulated. APPLICATIONS Aesthetic applications which require good gloss surface. - Garden furniture. - Toys. - Household. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PC262AV is a copolymer compound with 20% calcium carbonate and medium melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilised an antistatic formulated. APPLICATIONS Aesthetic applications which require good gloss surface. - Garden furniture. - Toys. - Household. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PC270AV is a homopolymer compound with 25% calcium carbonate, high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilised an antistatic formulated. APPLICATIONS Aesthetic applications which require good gloss surface. - Garden furniture. - Toys. - Household. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PC270BS is a homopolymer compound charged with 20% mineral fillers and medium melt flow rate. It shows high stiffness, low warpage and shrinkage behaviour, good aesthetic properties and high gloss surface. APPLICATIONS Aesthetic applications which require good gloss surface. - Hygienic product. - Adhesive backed hook and loop fasteners. - Electrodomestical appliances. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PC272AV is a copolymer compound with 20% calcium carbonate and high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilised and antistatic formulated. APPLICATIONS Aesthetic applications which require good gloss surface. - Garden furniture. - Toys. - Household. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PC372AV is a copolymer compound with 30% mineral filler and high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. This product is UV stabilised and antistatic formulated. APPLICATIONS Aesthetic applications which require good gloss surface. - Garden furniture. - Toys. - Household. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

ISPLEN® PC474AV is a copolymer compound charged with 40% calcium carbonate and high melt flow rate. It shows good impact strength, medium rigidity, high stiffness, low warpage and low shrinkage behaviour. It is UV stabilised and antistatic formulated. APPLICATIONS Aesthetic applications which require good gloss surface. - Gardens furniture. - Toys - Household - Components in washing machines. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Polypropylene homopolymer, 30% chemically coupled fibber glass reinforced compound. ISPLEN® PG340 AT shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. The product is high heat stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to severe mechanical stresses (light housings, heat and ventilation housings, filters). - Electrical housings, power tools. - Washing machines cylinders. - Technical pieces.

Polypropylene homopolymer, 30% chemically coupled fiber glass reinforced compound. ISPLEN® PG370 AS shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. APPLICATIONS - Automotive: Under the bonnet parts subjected to severe mechanical stresses. - Electrical housings, power tools. - Technical pieces, in general.

Polypropylene homopolymer, 30% chemically coupled fibber glass reinforced compound. ISPLEN® PG370 AT shows a very high stiffness, keeping good impact strength at every range of temperatures. It also shows a low warpage and shrinkage behaviour. The product is high heat stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to severe mechanical stresses (Light housings, heat and ventilation housings, filters) - Technical pieces, in general. - Electrical housings, power tools. - Washing machines cylinders.

Polypropylene homopolymer, 20% mineral fillers reinforced and low melt flow rate. ISPLEN PM240 AT gives a high stiffness, and a low warpage and shrinkage behaviour. The product is high heat stabilised. TYPICAL APPLICATIONS Automotive: - Under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts). - Air conditioning elements inside the car

Polypropylene homopolymer, 20% mineral fillers reinforced and medium melt flow rate. ISPLEN PM250 AX shows a high stiffness, as well as a low warpage and shrinkage behaviour. The product is high heat stabilised specially designed for being in contact with detergents. APPLICATIONS - Electrical appliances in contact with detergents. - Technical pieces, in general.

Polypropylene homopolymer, 20% mineral fillers reinforced and medium melt flow rate. ISPLEN PM250 BX shows an improved high stiffness, as well as a low warpage and shrinkage behaviour. The product is high heat stabilised specially designed for being in contact with detergents. APPLICATIONS - Washing machines cylinders and others electrical appliances in contact with detergents. - Technical pieces, in general.

Polypropylene copolymer, 20% mineral fillers reinforced and good melt flow rate. ISPLEN® PM252 AS gives a high impact resistance even at low temperatures showing a good stiffness, and a low warpage and shrinkage behaviour. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts). - Electrical appliances. - Technical pieces, in general.

Polypropylene homopolymer, 20% mineral fillers reinforced and high melt flow rate. ISPLEN® PM270 AT gives a high stiffness, and a low warpage and shrinkage behaviour. This product is high heat stabilised. APPLICATIONS - Automotive: Under the bonnet parts subjected to high thermal stress (Light housings, heat and ventilation ducts). - Heaters and air conditioning units. - Technical pieces, in general.