HIPOLEN P EH 7 is very low flow homopolymer with excellent resistance to organic solvents and very low moisture absorption rate. Grade EH 7 is designed for extrusion processes which demand high melt strength and enhanced processing stability. Advantages of end use products are high heat-ageing stability, good extraction stability and high chemical and corrosion resistance. Pipes and fittings made from EH are intended for transfer of hot liquids or gases at normal and medium pressures. Applications - Pipes for long-term usage at normal and higher temperature applications, such as drinking water and drain pipes - Related fittings - Rods, profiles - Mono- and multilayer sheets - Sheets for cladding work surfaces in industry

HIPOLEN P EH 71 is low flow homopolymer with excellent resistance to organic solvents and very low moisture absorption rate. Grade EH 71 is designed for extrusion processes which demand high melt strength and enhanced processing stability. Advantages of end use products are high heat-ageing stability, good extraction stability and high chemical and corrosion resistance. Pipes and fittings made from EH 71 are intended for transfer of hot liquids or gases at normal pressures. Applications - Pipes for long-term usage at normal and higher temperature applications, such as drinking water and drain pipes - Related fittings or pipes installation - Rods, profiles - Mono- and multilayer sheets

HIPOLEN P FB 4T is medium flow, nucleated polypropylene homopolymer with improved optical properties. Grade FB 4T is designed for sheet extrusion processes with enhanced processing stability for multiple-pass recycling. Packages made from FB 4T have high transparency and surface goss. This grade comply with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - High transparency thermoformed packages - Dairy cups and containers - Cups for water and cofee vending machines - Trays for sweet-meats and other foodstuffs

HIPOLEN P FL 6C is medium flow homopolymer designed for production of bi-axially oriented films. The products have good mechanical, optical and barrier properties. FL 6C has enhanced processing stabilization.. HIPOLEN P FL 6C complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Film for food, flower, textile and tobacco products packaging - Film for metallization and lacquering - Adhesive tapers, laminates

HIPOLEN P FY 5 is medium flow homopolymer with a good balance between melt strength and production rate. Grade FY 5 is designed for extrusion of flat and tubular films, intended for conversion into lighter denier stretched tapes, ranging from 1200 to 1300 dtex. End use products have high tensile properties and very consistent shrinkage behavior after processing. Yarn from stretched tapes is used in the place of more classic vegetable fibers, like sisal, hemp and jute. Applications - Film tapes and textile yarn from flat or blown film - Carpet backing, indus rial heavy duty fabrics and mats - Woven bags - Mono filament for brush, broom and different technical application

HIPOLEN P FY 6 is low flow homopolymer with a good balance between melt strength and production rate. Grade FY 6 is designed for extrusion of flat and tubular films, intended for conversion into stretched tapes for high denier yarn (3300-30000_dtex). End use products have high tensile properties and very consistent shrinkage after processing. Yarn from stretched tapes is used instead of more classic vegetable fibers, like sisal, hemp and jute. Applications - Tapes and yarn from flat or blown film - Baler and packaging twines, ropes - Industrial heavy duty fabrics and mats - Woven bags

HIPOLEN P MA 1 is very high flow homopolymer with narrow molecular weight distribution, intended for fast cycle injection molding. Grade MA 1 provides excellent processability in production of thin-wall articles. End products have improved characteristics, such as low consistent shrinkage and high stiffness. HIPOLEN P MA 1 complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Thin-wall products for various applications - Rigid containers, trays and other packages - Caps and closures

HIPOLEN P MA 2 is very high flow homopolymer with narrow molecular weight distribution intended for fast cycle injection molding. Grade MA 2 provides excellent processability and good part densification. End products have improved characteristics, such as low consistent shrinkage and uniform mechanical properties. HIPOLEN P MA 2 complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Parts for various appliances and furniture - Household goods - Rigid containers, trays and other packages - Caps and closures

HIPOLEN P MA 21 is very high flow homopolymer with narrow molecular weight distribution, intended for fast cycle injection molding. Grade MA 21 provides excellent processability in production of thin-wall articles. End products have improved characteristics, such as low consistent shrinkage and high stiffness. HIPOLEN P MA 21 complies with European Commission Regulation (EU) 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Thin-wall products for various applications - Rigid containers, trays and other packages - Caps and closures

HIPOLEN P MA 3 is high flow homopolymer with conventional molecular weight distribution, intended for injection molding. Grade MA 3 provides excellent processability and good part densification. End products have improved characteristics, consistent shrinkage, uniform mechanical properties and excellent resistance to stress-cracking agents. Applications - Parts for various appliances and furniture - Household goods - Toys - Caps and closures

HIPOLEN P MA 31 is general purpose high melt flow homopolymer with narrower molecular weight distribution. This grade is designe for injection molding of consumer articles, providing faster cycles and improved dimensional properties of end products. Grade MA 31 is also intended for production of additive and pigment master batches, for compounding with mineral fillers and wood particles, as well as for production of reinorced composites. Applications - Injection molding of various articles for one-shot using - Polymer component for Production of master batches - Polymer component for illed and reinforced composites

HIPOLEN P MA 4 is medium flow homopolymer with conventional molecular weight distribution, intended for injection molding. Grade MA 4 is designed for medium speed injection processes. This polimer provides excellent balance of end product excellent characteristics, relatively high impact and creep properties, good surface quality and dimensional stabiity. Applications - Parts for various appliances and furniture - Household goods - Toys - Caps and closures

HIPOLEN P MA 41 is medium flow homopolymer with conventional molecular weight distribution, intended for injection molding. Grade MA 41 is designed for medium speed injection processes. This polymer provides excellent balance of end product key characteristics, such as relatively high impact and creep properties, good surface quality and dimensional stability. Applications - Parts for various appliances and furniture - Household goods - Toys - Caps and closures

HIPOLEN P TA 3 is medium molecular weight distribution homopolymer intended for staple fibers manufacture. This polymer can be used also for CF and BCF multifilament production at medium-higher spinning speeds. Grade TA 3 is stabilized with general formulation which provides constant flow and high process stability. HIPOLEN P TA 3 complies with European Commission Regulation (EU) No. 10/2011 relating to plastic materials intended to come into contact with foodstuffs. Applications - Medium denier staple fibers for carpeting and upholstery - CF and BCF multifilament for woven applications - Thermally bonded and needle-woven nonwovens - Insulation material and staple fibers for filters and other technical fabrics - Cast film for packaging

HIPOLEN P TM 2G is high flow homopolymer with narrow molecular weight distribution, intended for continuous multifilament manufacture. The molecular structure provides excellent stability and uniform flow of the polymer melt at high speeds spinning of fibers. End use products have high color stability (antigasfading) and medium UV resistance. Applications - CF and BCF multifilament for carpets - Woven and non-woven multifilament for packages and various articles for automotive industry