INNOPOL ® CS 1-1000 TRS is a nucleated polypropylene homo polymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-1000 TRS is developed for producing injection moulded components, where the required properties are excellent stiffness besides transparency.

INNOPOL® CS 1-1120 EP is a 20 % talc-filled polypropylene homopolymer compound /PP-H TD20 (ISO 1043)/. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-1120 EP is developed for producing injection moulded components for automotive industry.

INNOPOL® CS 1-1240 is a 42 % chalk -filled polypropylene homopolymer compound /PP-H KD42 (ISO 1043)/. INNOPOL® CS 1-1240 is developed for producing injection moulded components for household equipments.

INNOPOL CS 1-2110 AB is a 10 % talc filled compound based on polypropylene homo-polymer.This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-2110 AB is developed to produce injection moulded components for sanitary wares, where one of the requirements is the antibacterial effect.

INNOPOL CS 1-2120 AP is a 20 % talc filled compound based on polypropylene homopolymer.This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-2120 AP is recommended especially for producing products, where high strength, low warpage, long term heat stability and excellent processability are required.

INNOPOL® CS 1-2130 is a 30 % talc-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-2130 is recommended especially for producing parts, where high stiffness, low shrinkage, good heat-stability and excellent processability are required.

INNOPOL® CS 1-2140 BLH is a 40 % talc-filled polypropylene homopolymer compound /PP-H TD40 (ISO 1043)/. This grade is available in nature and custom coloured form. INNOPOL® CS 1-2140 BLH is recommended especially for producing products, where high stiffness, low shrinkage, long term heat stability and excellent processability are required.

INNOPOL® CS 1-2820 MA is a 20 % glass fiber filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-2820 MA is recommended for producing injection molded products, where the required properties are high stiffness, long term heat stability besides good processability.

INNOPOL® CS 1-3000 DEL is a polypropylene homopolymer based compound. This grade is available in nature and custom coloured form as well. Recommended application INNOPOL® CS 1-3000 DEL is developed for producing injection moulded automotive products.

INNOPOL CS 1-3120 DEL is a 20 % talcum filled compound based on polypropylene homopolymer. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-3120 DEL is developed for producing injection moulded automotive components.

INNOPOL CS 1-3120 MA is a 20 % talcum filled compound based on polypropylene homopolymer.This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-3120 MA is developed to produce injection moulded automotive components for under-the-hood application.

INNOPOL ® CS 1-3140 MA is a 40 % talc-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-3140 MA is recommended especially for producing products, where high stiffness, long term heat stability and excellent processability are required.

Product description INNOPOL CS 1-3140 OL is a 40% talc-filled compound based on polypropylene homo-polymer. This grade is available in natural and custom coloured form. Recommended application INNOPOL ® CS 1-3140 OL is developed to produce injection moulded automotive components for air conditioning units.

INNOPOL® CS 1-3250 is a 42 % chalk-filled polypropylene homopolymer compound /PP-H KD42 (ISO 1043)/. INNOPOL® CS 1-3250 is developed for producing injection moulded components for household equipments.

INNOPOL® CS 1-3260 is a 55 % chalk-filled polypropylene homopolymer compound /PP-H KD55 (ISO 1043)/. INNOPOL® CS 1-3260 is developed for producing injection moulded components for household equipments.

INNOPOL® CS 1-3610 UW is a white coloured, flame retarded and UV-stabilized polypropylene homopolymer compound. INNOPOL® CS 1-3610 UW is recommended for producing electric articles by injection moulding.

INNOPOL® CS 1-3810 is a 10 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. INNOPOL® CS 1-3810 is recommended for producing injection moulded products, where the required properties are high strength and stiffness.

INNOPOL® CS 1-3820 MA is a 20 % glass fibre filled polypropylene homopolymer compound. This grade is available in natural and custom coloured form. INNOPOL® CS 1-3820 MA is recommended for producing injection molded products, where the required properties are high strength and stiffness besides long term heat stability and excellent processability.

INNOPOL® CS 1-3820 is a 20 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. INNOPOL® CS 1-3820 is recommended for producing injection moulded products, where the required properties are high strength and stiffness.

INNOPOL ® CS 1-3830 HS is a 30 % glass fiber filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-3830 HS is recommended for producing injection molded products, where the required properties are excellent strength and stiffness. INNOPOL ® CS 1-3830 HS is a long term thermal stabilised product.

INNOPOL ® CS 1-3830 is a 30 % glass fiber filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-3830 is recommended for producing injection molded products, where the required properties are excellent stiffness and impact strength besides good processability.

INNOPOL CS 1-4130 GF10 is a 20% talc and 10% glass-fibre filled compound based on polypropylene homopolymer. This grade is available in nature and custom coloured form as well. Recommended application INNOPOL ® CS 1-4130 GF10 is developed for producing injection moulded components, where the required properties are excellent stiffness and strength.

INNOPOL® CS 1-4140 AP is a 40 % talc-filled, polypropylene homopolymer compound/PP-H TD40 (ISO 1043)/. This grade is available in nature and custom coloured form as well.

INNOPOL® CS 1-4940 MC is a 40 % mica-filled polypropylene homopolymer compound /PP-H MC40 (ISO 1043)/. This grade is available in nature and custom coloured form as well. Recommended application INNOPOL® CS 1-4940 MC is recommended especially for producing products, where high stiffness, low shrinkage and long term heat stability are required.

INNOPOL® CS 1-5120 BLH is a 20 % talc-filled polypropylene homopolymer compound /PP-H TD20 (ISO 1043)/. INNOPOL® CS 1-5120 BLH is recommended especially for producing products, where high stiffness and long term heat stability are required.

INNOPOL® CS 1-5140 LH is a 40 % talc-filled polypropylene homopolymer compound /PP-H TD40 (ISO 1043)/. This grade is available in nature and custom coloured form as well. INNOPOL® CS 1-5140 BLH is recommended especially for producing products, where high stiffness, low shrinkage and long term heat stability are required.

INNOPOL ® CS 1-5810 T20 is a 10 % glass fiber and 20% talc filled polypropylene homopolymer compound. This grade is available in natural and custom coloured form. Recommended application INNOPOL ® CS 1-5810 T20 is recommended for producing injection molded products, where the required properties are high strength and stiffness.

INNOPOL® CS 1-5820 15GF is a 15 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-5820 15GF is recommended for producing injection moulded products, where the required property is a good stiffness.

INNOPOL® CS 1-5820 SA is a 20 % glass-fibre filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-5820 SA is recommended for producing injection moulded products, where the required properties are high strength and stiffness.

INNOPOL® CS 1-5830 MA is a 30 % glass-fibre filled, chemically coupled polypropylene homopolymer compound. This grade is available in nature and black coloured form.

INNOPOL® CS 1-5830 SA is a 30 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL® CS 1-5830 SA is recommended for producing injection moulded products, where the required properties are high strength and stiffness.

INNOPOL ® CS 1-5830 is a 30 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-5830 is recommended for producing injection moulded products, where the required properties are high strength and stiffness.

INNOPOL ® CS 1-6140 is a 40 % talc-filled polypropylene homopolymer compound/PP-H TD40 (ISO 1043)/. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-6140 is developed for producing injection moulded components for household equipments. INNOPOL ® CS 1-6140 is high heat and wash-liquor stabilised.

INNOPOL ® CS 1-6820 MA is a 20 % glass fibre filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-6820 MA is recommended for producing injection moulded products, where the required properties are high strength and stiffness besides good heat stability.

INNOPOL ® CS 1-6830 HS is a 30 % glass fiber filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-6830 HS is recommended for producing injection molded products, where the required properties are excellent strength and stiffness. INNOPOL ® CS 1-6830 HS is a long term thermal stabilised product.

INNOPOL ® CS 1-7120 is a 20 % talc-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-7120 is recommended for extrusion of sheets and profiles, where one of the required properties is good stiffness.

INNOPOL ® CS 1-7830 HGF is a 30 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-7830 HGF is recommended to be used for applications where the required properties are high strength and stiffness besides long term heat stability.

INNOPOL ® CS 1-7830 HL is a 30 % glass-fibre-filled polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-7830 HL is recommended to be used for applications where the required properties are high strength and stiffness besides long term heat stability.

INNOPOL ® CS 1-8000 is a polypropylene homopolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 1-8000 is highly suitable for manufacturing indoor waste water discharge systems where the required properties are high strength, high stiffness and chemical resistance.

INNOPOL ® CS 2-1000 is a polypropylene block-copolymer compound. This grade is available in nature and custom coloured form. Recommended application INNOPOL ® CS 2-1000 is developed for producing injection moulded automotive components.