SCGC PP P1085J is high crystalline polypropylene impact copolymer. It is designed for compounding base. This resin is recommended for automotive and applicance compounding products that require high melt flow rate for thin wall parts.

SCC PP P303S is a homopolymer polypropylene resin which is suitable for sheet and thermoforming products that required high stiffness and high clarity. It is particularly designed for solid phase pressure forming.

SCG PP P350F is a polypropylene copolymer without slip and anti-blocking agent designed suitable for cast film process with good seal properties, excellent clarity and good stress whitening resistance.

P400S is a homopolymer polypropylene resin which is specially designed for flat yarn or raffia products and monofilament application as well. P400S offers good features for Flat Yarn application as consistency process ability, high productivity with balance good mechanical properties.

P401S is a homopolymer polypropylene resin which is specially designed for flat yarn or raffia products and monofilament application as well. P401S offers good features for Flat Yarn application as consistency process ability and high mechanical properties.

SCG PP P403J is a homopolymer polypropylene resin suitable for general propose product which required good impact resistance produced from injection molding process.

SCGC PP P405F is crystal clear single structure polypropylene resin for bi-axial oriented polypropylene film. This resin offer unique properties led to good stretchability and high clarity for film in flexible packaging.

SCGC PP P408F is homopolypropylene resin for bi-axial oriented polypropylene film. This resin offers higher stiffness and better heat resistance film than conventional BOPP film.

SCG PP P44OJ is an impact co-polypropylene designed for injection molding process. This resin is recommended for product that requires high impact strength with good stiffness.

SCG PP P441JU is an impact co-polypropylene resin which contains anti-static agent and UV stabilizer. It is designed for injection molding process. This resin is recommended for product that requires good outdoor performance.

SCG PP P443J is an impact copolymer polypropylene resin with good processability and good mechanical properties. It is particularly designed for injection molding and continuous compression molding of caps and closures

SCG PP P483JU is a developmental of high stiffness polypropylene impact copolymer product which contains anti-static agent and UV stabilizer. It is designed for very high stiffness, creep resistance, and high heat resistance while maintain a good impact strength than those of general polypropylene impact copolymer. It is suitable for injection molding process.

P600F is a homopolymer polypropylene resin with slip and antiblock agent. It is recommended for water-quenched blown film for food and clothe pakaging with good optical porperties and high productivity.

SCG PP P601F is homopolypropylene resin for water-quenched blown film resin. This grade is contain high slip and antiblock agent and recommended for application that film thickness is lower than 50µm.

P602F is a Homopolymer polypropylene resin without slip and antiblock agent. It is recommended for water—quenched blown film for thick pakaging with excellent optical porperties and high productivity.

SCG PP P607F is a homopolymer polypropylene resin without slip and antiblock agent, and suitable for cast film application as a core layer of a co—extrusion film or a monolayer film requiring high film stiffness and high clarity

SCG PP P639AT is a very high flow rate impact copolymer polypropylene resin. It is designed for compounding and injection molding process. This resin is suggested for compounds that require low flow mark after injection process. It is suitable for various automotive parts.

SCG PP P640J is an impact copolymer polypropylene resin designed for injection molding process. This resin is recommended for product that requires high impact strength with good stiffness and processibility.

SCG PP P642J is an impact copolymer polypropylene resin which contains anti-static agent and UV stabilizer. It is suitable for Injection molding process This resin is recommended for product that requires high impact strength and stiffness.

SCG PP P655|lVl is the polypropylene random copolymer resin that is well-suited to healthcare and pharmaceutical products with good clarity. P655|lVl is designed for product produced by Injection Stretch Blow Molding (|SBlVl) process. P655|lVl is compliant to FDA, USP, and EP requirements.

SCGC PP P686J is polypropylene impact copolymer resin which contains nucleating agent. It is designed for injection molding process. This resin is recommended for product that that requires high impact strength with high stiffness and good productivity.

SCG PP P7001 is a homopolymer polypropylene resin designed for injection molding process. This resin is recommended for general purpose product.

SCG PP P7011 is a homopolymer polypropylene resin designed for injection molding process. This resin is recommended for general purpose product.

SCG PP P7021 is a homopolymer polypropylene resin designed for injection molding process. This resin is recommended for general purpose product.

SCC PP P704JM is a homopolymer polypropylene resin that is well-suited to healthcare and pharmaceutical products. P704JM has good processability, high clarity and is compliant to FDA and USP requirements.P704JMl can be injection molded and sterilized by ethylene oxide.

SCC PP P705JM is homopolymer polypropylene resin that is well suited to healthcare and pharmaceutical products. P705JM has good processability, high stiffness and is compliant to FDA, USP, and EP requirements.P705JM can be injection molded and sterilized by ethylene oxide.

SCG PP P722JO is an impact copolymer polypropylene resin which contains UV stabilizer. This resin is recommended for producing battery case from injection molding process.

SCG PP P739ET is a high flow rate impact copolymer polypropylene resin. It is designed for compounding and injection molding process. This resin is recommended for compounds that require good surface aesthetics and low flow mark after injection process. It is suitable for various automotive parts.

SCG PP P740J is a medium flow impact copolymer resin. It is designed for injection molding process. This resin is recommended for product that requires good stiffness and impact balance.

SCG PP P744J is an impact copolymer polypropylene resin designed for high speed injection molding process. This resin is recommended for product that requires high stiffness and high processibility.

SCG PP P747WT IS a low gloss and medium flow impact copolymer polypropylene resin. It is designed for compounding and injection molding process. This resin is recommended for product which require good surface aesthetics and stiffness/impact balance It is suitable for various automotive parts.

SCG PP P7501 is a random copolymer polypropylene resins which giving high clarity and contain anti-static agent, suitable for general propose product produced from injection molding process.

P765J is very high impact polypropylene copolymer. It is designed for automotive interior and exterior parts such as door trims, instrumental panel and bumper which it's suitable for injection molding process. This resin is recommended for product that require very high impact strength at room temperature and low temperature.

SCGC PP P809JM is a homopolymer polypropylene resin that is well-suited to healthcare and pharmaceutical products. P809JM exhibits high flow ability, high clarity and is compliant to FDA and USP requirements. P809JM can be injection molded and sterilized by ethylene oxide.

P838C is a polypropylene product which is specially designed for extrusion coating or lamination coating with PP substrate application. P838C can be used in several coating application for example coated woven bag, tarpaulin, laminated with PP substrate which is required stiffness of finish products.

SCG PP P840J is a high flow polypropylene impact copolymer resin. It is designed for injection molding process. This resin is recommended for product that requires good stiffness and impact balance.

SCCi PP P84iJ is an impact copolymer polypropylene resin which contains anti-static agent and UV stabilizer. It is designed for injection molding process. This resin is recommended for product that requires very high processibility and good UV performance.

SCG PP P901J is a homopolymer polypropylene resin with excellent flowability, high stiffness and high clarity. This grade is especially suitable for thin wall injection molding.

SCG PP P902J is a homopolymer polypropylene resin with excellent flow ability, high stiffness and high clarity. This grade is especially suitable for thin wall injection molding for food, beverage and general packaging.

SCGC PP P904J is a homopolymer polypropylene resin for thin wall packaging and products with long path length. The resin was designed for high flowability, good properties balance (toughness and stiffness), good diamension stability and high clarity. This grade is especially suitable for injection molding process in food, beverage and general packaging applications.