Monprene CE-922968 is a general purpose thermoplastic elastomer, available in NAT and colors, developed for a variety of consumer electronic product applications, including communication cable jacketing. Monprene CE-922968 is a medium hardness, low density, UV resistant, ROHS compliant grade suitable for extrusion.

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10130 is a low hardness, low density, unfilled grade that is suitable for injection molding.

Monprene CP-10130H, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-10130H is a low density, low hardness, halogen free grade that is suitable for injection molding.

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10140 is a low hardness, low density, unfilled grade that is suitable for injection molding.

Monprene CP-10140H, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-10140H is a low density, low hardness, halogen free grade that is suitable for injection molding.

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10150 is a medium hardness, low density, unfilled grade that is suitable for injection molding.

Monprene CP-10150H, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-10150H is a low density, medium hardness, halogen free grade that is suitable for injection molding.

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10160 is a medium hardness, low density, unfilled grade that is suitable for injection molding.

Monprene CP-10160H, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-10160H is a low density, medium hardness, halogen free grade that is suitable for injection molding.

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10170 is a medium hardness, low density, unfilled grade that is suitable for injection molding.

Monprene CP-10170H, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-10170H is a low density, medium hardness, halogen free grade that is suitable for injection molding.

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10180 is a high hardness, low density, unfilled grade that is suitable for injection molding.

Monprene CP-10180H, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-10180H is a low density, high hardness, halogen free grade that is suitable for injection molding.

The Monprene CP-10100 Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-10190 is a higher hardness, low density, unfilled grade that is suitable for injection molding.

The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11140 is a low hardness, high density, filled grade that is suitable for injection molding.

The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11150 is a medium hardness, high density, filled grade that is suitable for injection molding.

The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11160 is a medium hardness, high density, filled grade that is suitable for injection molding.

The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11170 is a medium hardness, high density, filled grade that is suitable for injection molding.

The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11180 is a medium hardness, high density, filled grade that is suitable for injection molding.

The Monprene CP-11100 High Density Series of thermoplastic elastomer compounds, available in NAT or colors, from 40 to 90 Shore A, are designed specifically for consumer product applications requiring a soft, rubber-like feel. Monprene CP-11190 is a higher hardness, high density, filled grade that is suitable for injection molding.

Monprene CP-12208, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-12208 is a low density, low hardness, RoHS compliant grade suitable for injection molding.

Monprene CP-13022D is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-13022D is a low density, high hardness grade that exhibits good abrasion resistance and is suitable for both injection molding and extrusion.

Monprene CP-13029 is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-13029 is a low density, low hardness, RoHS compliant grade that is suitable for injection molding.

Monprene CP-13057G CLR is a very soft clear thermoplastic elastomer gel designed for a variety of consumer product applications. This grade exhibits high flow and is suitable for injection molding.

Monprene CP-13130 is a high performance thermoplastic elastomer designed for a variety of consumer product applications. Monprene CP-13130 is a lubricated, low hardness, low density grade that is suitable for injection molding or extrusion.

Monprene CP-13163 is a general purpose thermoplastic elastomer, available in NAT and BLK, designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-13163 is a medium hardness, high density grade that is suitable for injection molding or extrusion.

Monprene CP-13235 is a high performance thermoplastic elastomer that is designed for a variety of consumer applications. Monprene CP-13235 is low hardness, low density, high flow grade that is suitable for injection molding.

Monprene CP-13242 NAT XRD1 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications, including toys, requiring a soft, rubber-like feel. Monprene CP-13242 NAT XRD1 is a low hardness, low density grade that is suitable for injection molding and is available in other colors.

Monprene CP-13258 NAT XRD1 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications, including toys, requiring a soft, rubber-like feel. Monprene CP-13258 NAT XRD1 is a low hardness, low density grade that is suitable for injection molding and is available in other colors.

Monprene CP-13261 is a general purpose thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-13261 is a low density, low hardness, RoHS compliant grade suitable for injection molding and extrusion.

Monprene CP-15118 is a high performance thermoplastic elastomer specifically designed for consumer and Industrial applications. Monprene CP-15118 is a low hardness, low density, RoHS compliant grade suitable for injection molding and extrusion applications.

Monprene CP-15210 NAT XRD1, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-15210 NAT XRD1 is a low density, low hardness, RoHS compliant grade suitable for injection molding.

Monprene CP-15237 NAT XRD1, available in NAT and colors, is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-15237 NAT XRD1 is a low density, RoHS compliant grade suitable for injection molding.

The Monprene® CP-16500 series of thermoplastic elastomers (TPEs) is specifically designed for dog toys, offering a sustainable alternative to thermoset rubber with excellent recyclability. Available from 25 to 65 Shore A, these TPEs are formulated with only FDA listed ingredients and mold thick and thin parts with ease. Monprene CP-16525 is a transparent, medium gloss TPE that offers an excellent balance of economics and toughness.

The Monprene® CP-16500 series of thermoplastic elastomers (TPEs) is specifically designed for dog toys, offering a sustainable alternative to thermoset rubber with excellent recyclability. Available from 25 to 65 Shore A, these TPEs are formulated with only FDA listed ingredients and mold thick and thin parts with ease. Monprene CP-16530 is a transparent, medium gloss TPE that offers an excellent balance of economics and toughness.

The Monprene® CP-16500 series of thermoplastic elastomers (TPEs) is specifically designed for dog toys, offering a sustainable alternative to thermoset rubber with excellent recyclability. Available from 25 to 65 Shore A, these TPEs are formulated with only FDA listed ingredients and mold thick and thin parts with ease. Monprene CP-16532 is a translucent, medium gloss specialty TPE that offers excellent tear strength and superior resistance to puncture and tear propagation.

The Monprene® CP-16500 series of thermoplastic elastomers (TPEs) is specifically designed for dog toys, offering a sustainable alternative to thermoset rubber with excellent recyclability. Available from 25 to 65 Shore A, these TPEs are formulated with only FDA listed ingredients and mold thick and thin parts with ease. Monprene CP-16535 is an opaque, high gloss TPE that offers an excellent balance of economics and toughness.