Product Description: TREXPRENE ® A35BU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Black compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A40CW is a UV, heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This pre-colored compound is intended primarily for applications needing good compression set properties, excellent aesthetics and UV characteristics. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A40NI HF is a heat & UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is primarily intended for interior applications and can be processed using extrusion, injection, blow molding or other melt processing techniques.

Product Description: TREXPRENE ® A40NU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A45BU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Black compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A45NI is a heat & UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is primarily intended for interior applications and can be processed using extrusion, injection, blow molding or other melt processing techniques.

Product Description: TREXPRENE ® A55NI-HF is a natural PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). The material has been formulated specifically for the sheet market and can be used as a master batch in TPO formulations or in its virgin state. The material contains no UV stabilizers as the intention is that this will be added by the processor with the desired color concentrate. The material is intended for applications where excellent gas-fade resistance or non-pinking is required. This material can be processed using Extrusion or Calendaring processes.

Product Description: TREXPRENE ® A55BU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Black compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A55BW is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) and is primarily intended for Exterior applications. This material can be processed using Extrusion, Injection, or Blow Molding equipment.

Product Description: TREXPRENE ® A55CI is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This material is available as a custom pre-colored compound and is intended primarily for interior trim applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A55NI is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is primarily intended for interior applications can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A55NI-HF is a natural heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This material can be processed using Extrusion, Injection, Blow Molding equipment, or other melt processing.

TREXPRENE ® A55NU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A55SCI is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This grade also contains a "Slip Additive" for improved scratch/mar resistance and anti-wear properties. This material is available as a custom pre-colored compound and is intended primarily for interior trim applications. This compound can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A64BI is a black; heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This compound is primarily intended for under-hood and interior applications and can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A64BU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Black compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A64BW HF is a UV & heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This compound is intended primarily for exterior and interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A64CI is a pre-colored, heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This compound is primarily intended for interior automotive applications and can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A64NU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A65SCI is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) which contains a lubricant/slip package for lower co-efficient of friction and anti-wear properties versus normal TPV's. This compound is formulated in pre-color form primarily for under-hood or interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A67BW is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) and is primarily intended for Exterior applications. This Black material can be processed using Extrusion, Injection, or Blow Molding equipment.

Product Description: TREXPRENE ® A67CW is a pre-colored, heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). It is primarily intended for Exterior applications where a pre-colored compound with good compressions set and UV properties are needed. This pre-colored material can be processed using Extrusion, Injection, or Blow Molding equipment.

Product Description: TREXPRENE ® A70BI-HF is a heat stabilized and UV Stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This high flow, black compound is intended primarily for injection molding applications where longer flow distances and good surface appearance is needed. The material is primarily for under the hood and interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A70BWEB-HF is a heat stabilized, weatherable thermoplastic vulcanizate containing EPDM particles dispersed in a continuous PP matrix. This high flow, black compound is formulated to bond to vulcanized EPDM rubber and is intended for injection molding applications where longer flow distances and good surface appearance is needed. Typical applications include weatherstrip corner molds and end caps.

Product Description: TREXPRENE ® A70CI is a heat stabilized and UV Stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This pre-colored compound is for interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A70CI-HF is a heat stabilized and UV Stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This high flow, pre-colored compound is intended primarily for injection molding applications where longer flow distances and good surface appearance is needed. The material is primarily for interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A70NI-HF is a heat stabilized and UV Stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This high flow, natural compound is intended primarily for injection molding applications where longer flow distances and good surface appearance is needed. The material is primarily for interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A70SCI is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) which contains a lubricant/slip package for lower co-efficient of friction and anti-wear properties versus normal TPV's. This compound is formulated in pre-color form primarily for under-hood or interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A74BU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Black compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A74BW is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) and is primarily intended for Exterior applications. This material can be processed using Extrusion, Injection, or Blow Molding equipment.

Product Description: TREXPRENE ® A74CI is a pre-colored, heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This compound is primarily intended for interior automotive applications and can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A74NU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A75SCI-HF is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) which contains a lubricant/slip package for lower co-efficient of friction and anti-wear properties versus normal TPV's. This compound is formulated in pre-color form primarily for underhood or interior applications. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A80BI is a black; heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This compound is primarily intended for under-hood and interior applications and can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A80BU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Black compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A80BW is a heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV) and is primarily intended for Exterior applications. This material can be processed using Extrusion, Injection, or Blow Molding equipment.

Product Description: TREXPRENE ® A80BWEB-HF is a heat stabilized, weatherable thermoplastic vulcanizate containing EPDM particles dispersed in a continuous PP matrix. This high flow, black compound is formulated to bond to vulcanized EPDM rubber and is intended for injection molding applications where longer flow distances and good surface appearance is needed. Typical applications include weatherstrip corner molds and end caps.

Product Description: TREXPRENE ® A80CI is a pre-colored, heat and UV stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This compound is primarily intended for interior automotive applications and can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A80NU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Natural compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.

Product Description: TREXPRENE ® A88BU is a heat stabilized PP/EPDM based Thermoplastic Vulcanized Elastomer (TPV). This Black compound is intended primarily for underhood applications such as mats, seals, gaskets, air ducts, CVJ boots, covers, grommets or other parts where softness and conformity are needed. This material can be processed using Injection Molding, Extrusion, Blow Molding or other melt processing techniques.