- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene

- Elastoflo TPEs (SEBS Based Thermoplastic Elastomers) are a family of soft and rubbery products designed for applications requiring soft touch feel, high abrasion and slip resistance. These products have outstanding tear and tensile properties compared to thermoset EPDM. - Elastoflo products are available in a wide range of hardness and are naturally "white" in color; making these products highly suitable for bright colored parts. - Elastoflo products can be molded or extruded using standard thermoplastic equipment. - Elastoflo products are non-­-hygroscopic (do not absorb moisture); hence there is no need for drying before use; thereby eliminating the need for expensive and energy hungry dryers. - Elastoflo products are fully recyclable; up to 40% regrind can be added to virgin material with no effect on processing or physical properties. - Elastoflo products are an ideal choice for single component molded parts as well as over-­-molding applications. It is fully bondable to polypropylene. - Elastoflo products are a drop in when SEBS or SBS compounds are used. In brief -- Excellent abrasion and tear resistance -- Soft touch feel -- Slip resistance -- Fully weatherable -- Does not need to be dried before use -- Easily colorable -- Fully recyclable -- Easily van be molded or extruded using conventional thermoplastic equipments ideal for over molding and two shot molding bondable to Polypropylene