Prospector

Thermoplastic Elastomer (TPE): SUPRENE®

Product Availability Product Description
SUPRENE® 501A Asia Pacific
SUPRENE EPDM 501A is a low Mooney Viscosity and ENB type grade. It shows excellent mill processability. It has good flow and is suitable for molding complicated shaped products. It is also suitable for extrusion of cable. Main uses of SUPRENE EPDM 501A are found in gasket, roll, electric parts, wire & cable, various rubber coated fabrics and general industrial parts.
SUPRENE® 503 Asia Pacific
SUPRENE EPDM 503 is ENB type grade, which has high ethylene content and low Mooney Viscosity. It shows excellent mechanical properties even in high hardness compound. It has good flow property and is suitable for weather strip with high hardness and low compression set. Main uses of SUPRENE EPDM 503 are found in weather strip, joint, molded parts, electric parts, wire & cable, various rubber coated materials and general industrial parts.
SUPRENE® 505A Asia Pacific
SUPRENE EPDM 505A has lower Mooney viscosity than SUPRENE EPDM 505, and its mill processability is further improved. It is Possible to mold with SUPRENE EPDM 505A various molded products within a short time because of its fast cure rate. When SUPRENE EPDM 505A blended with diene type rubber, its dispersion is excellent. It can also be used more effectively by taking advantage of good ozone resistances. SUPRENE EPDM 505A is suitable for sponge made by continuous curing. Low density sponge can be obtained through the curing. It can also be used in various applications such as automotive tires, rubber coated fabrics, and automotive parts.
SUPRENE® 512F Asia Pacific
SUPRENE EPDM 512F has high ethylene content for high green strength of uncured rubber. Since SUPRENE EPDM 512F can make a formulation incorporating large quantities of fillers and process oil, the resulting compound is inexpensive. In addition, its 'friable bale' form facilitates its mixing with ingredients by means of a Banbury mixer and at shorter mixing time, which results in energy saving. For examples of application of SUPRENE EPDM 512F making the best use of its above- mentioned characteristics, there are various extrusion products, such as hose, window gasket, various molded products, and low cost compounds.
SUPRENE® 5206F Asia Pacific
SUPRENE EPDM 5206F is a non-oil extended grade with very high Mooney viscosity and high ENB content. SUPRENE EPDM 5206F shows excellent extrusion processability and its moderate ethylene content gives this grade a better flexibility under low temperature, compared with high ethylene grades. Especially, fast curing is possible with this grade because of its high ENB content. SUPRENE EPDM 5206F is suitable for sponge made by continuous curing such as window seal, body seal for automotives and adiabatic sponge.
SUPRENE® 537-2 Asia Pacific
SUPRENE EPDM 537-2 is used by blending with IIR. SUPRENE EPDM 537-2 shows excellent heat aging properties, especially with peroxide cures. It blends easily in all formulation and gives excellent weathering and low temperature impact properties. SUPRENE EPDM 537-2 is mainly used in blends with IIR for inner tubes. It can also be used in various applications such as mechanical goods.
SUPRENE® 537-3 Asia Pacific
SUPRENE EPDM 537-3 is used by blending with IIR. SUPRENE EPDM 537-3 shows excellent heat aging properties, especially with peroxide cures. It blends easily in all formulation and gives excellent weathering and low temperature impact properties. SUPRENE EPDM 537-3 is mainly used in blends with IIR for inner tubes. It can also be used in various applications such as mechanical goods.
SUPRENE® 552 Asia Pacific
SUPRENE EPDM 552 has high Mooney viscosity with fast curing. SUPRENE EPDM 552 shows excellent extrusion processability and physical properties with high loading fillers. Its good green strength can give better shape retention and higher extrudability. SUPRENE EPDM 552 is mainly used in automotive exterior parts such as window seal and used in other various applications.
SUPRENE® 553 Asia Pacific
SUPRENE EPDM 553 is a non-oil extended grade with very high Mooney viscosity. SUPRENE EPDM 553 shows excellent extrusion processability and physical properties with high loading fillers. Its moderate ethylene content gives this grade a better flexibility under low temperature, compared with high ethylene grades. Its good green strength can give better shape retention and higher extrudability. SUPRENE EPDM 553 is mainly used in automotive exterior parts such as window seal and used in other various applications.
SUPRENE® 5890F Asia Pacific
SUPRENE EPDM 5890F is a non-oil extended grade with very high Mooney viscosity and high ethylene content. SUPRENE EPDM 5890F is well balanced in processability and physical properties with high loading fillers. Its good green strength can give better shape retention and higher extrudability. SUPRENE EPDM 5890F is mainly used solid extrudate for automotive parts such as window seal, hose and used in other various applications.
SUPRENE® 600WF Asia Pacific
SUPRENE EPDM 600WF is an oil-extended ‘friable bale' ENB type grade which contains 100phr of non-staining paraffinic oil. SUPRENE EPDM 600WF is possible to load it with high concentration of fillers etc. When blended with a non-oil extended SUPRENE EPDM grade, the SUPRENE EPDM 600WF improves the properties and processability (at mixing and extruding) of the non-oil extended grade. It can be formulated to make products of lower hardness. Its blend with diene-type rubber gives excellent physical properties. SUPRENE EPDM 600WF is mainly used in automotive parts such as window seal, hose, and various industrial parts.
SUPRENE® 7486F Asia Pacific
SUPRENE EPDM 7486F is a non oil extended grade with very high Mooney viscosity and extra high ENB content. SUPRENE EPDM 7486F shows excellent extrusion processability due to its tailored molecular architecture and its moderate ethylene content gives a better flexibility under low temperature condition, compared with high ethylene grades. Especially, controlled cellular structure with dimensional stability can be realized with fast curing performance with this high ENB grade. SUPRENE EPDM 7486F is suitable for sponge application made by continuous vulcanization such as window seal, body seal for automotive and adiabatic sponge.
SUPRENE® S6090WF Asia Pacific
SUPRENE EPDM 6090WF is an oil-extended ‘friable bale' ENB type grade which contains 50phr of non-staining paraffinic oil. SUPRENE EPDM 6090WF is possible to load it with high concentration of fillers etc. When blended with a non-oil extended SUPRENE EPDM grade, the SUPRENE EPDM 6090WF improves the properties and processability (at mixing and extruding) of the non-oil extended grade. It can be formulated to make products of lower hardness. Its blend with diene-type rubber gives excellent physical properties. SUPRENE EPDM 6090WF is mainly used in automotive parts such as window seal, hose, and various industrial parts.
1
1