| ACRIBEN SA 338 | Benasedo | ACRIBEN SA 338 is a self crosslinking acrylic polymer endowed with very good transparency, good chemical resistance, and non-yellowing properties. It is suitable to formulate fast drying clear and pigmented water based top-coats for furniture. | |
| Acronal® 7015 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal ® 7015 is a finely dispersed emulsion polymer that has a medium viscosity. It is a fill with good bond force. It has good flexibility and anti-sticky features on the film. | |
| Acronal® A 684 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural f...veja mais Acronal A 684 is a straight acrylic binder with good wet adhesion on difficult substrates. It is a APEO-free, excellent resistance to dirt pick-up, very good wet adhesion, and a broad formulation latitude. Acronal A 684 has applications in architectural finishes, wood paints, wood stains, latex paints, and textured finishes. veja menos | |
| Acronal® PA 510 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain prod...veja mais Acronal® PA 510 is a very fine, anionic dispersion of medium viscosity. This is a multiphase polymer with a special particle morphology, and this emulsion has extremely fine particles that provide excellent thickening response. Coatings or wood stain produced with Acronal® PA 510 are therefore highly blocking- resistant and at the same time flexible. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate like aged alkyd resin paints. Acronal® PA 510 formulated high gloss coating provides high block resistant. Acronal® PA 510 has excellent wet adhesion on wood and to any critical substrate especially to aged alkyd. veja menos | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...veja mais Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Akuabrid HM 1153 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 1153 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 2124 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 2124 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 4001 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 4001 is a high modulus, solvent-free, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good water resistance and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 6552A | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ide...veja mais Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. veja menos | |
| Akuabrid HM 6560 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...veja mais Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. veja menos | |
| Akuabrid HM 6574 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...veja mais Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. veja menos | |
| Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...veja mais Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Akuapol AL 2200 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2200 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2300 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2300 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 2400 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 2400 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| Akuapol AL 4500 | T&L Co., Ltd. Polymer Technology Centre | Akuapol AL 4500 is a solvent/APEO free, high gloss, milky white, waterborne acrylic polyol featuring fast drying and good water, weather, and chemical resistance. This product is ideal for use in wood, floor, and metal coatings. | |
| B-559S | Add and Poly Resin Industrial Co., Ltd. | B-559S is a medium hard thermoplastic acrylic resin supplied in alcohol-rich form. It provides good adhesion on plastics, good pigment dispersion, scratch resistance, and toughness. This product is well suited for surface coatings on solvent-sensitive pla...veja mais B-559S is a medium hard thermoplastic acrylic resin supplied in alcohol-rich form. It provides good adhesion on plastics, good pigment dispersion, scratch resistance, and toughness. This product is well suited for surface coatings on solvent-sensitive plastics, metals, wood, and vacuum plated parts. veja menos | |
| B-692 | Add and Poly Resin Industrial Co., Ltd. | B-692 is a thermoplastic acrylic resin that provides high solid, high film build, extreme hardness, fast drying, and water and chemical resistance. This product is well suited for use with fast drying nitrocellulose wood coatings, short oil alkyds, and ma...veja mais B-692 is a thermoplastic acrylic resin that provides high solid, high film build, extreme hardness, fast drying, and water and chemical resistance. This product is well suited for use with fast drying nitrocellulose wood coatings, short oil alkyds, and maleic acid resins. veja menos | |
| Crestacryl® 71-5060 | Scott Bader | Crestacryl® 71-5060 is a thermoplastic acrylic with excellent solvent release, elasticity and adhesion onto various metallic substrates. Also used for primers for metal and wood finishing. | |
| Disvacryl-1000 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1000 is a thermoplastic acrylic resin. This product includes xylene as volatile byproducts. It can be used in high-quality air-drying finishes for metal, wood, concrete, and masonry. | |
| Disvacryl-1002 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1002 is a thermoplastic acrylic resin. This product includes methanol olefins and xylene as volatile byproducts. It can be used in acrylic coatings for plastic, metal and wood substrates. | |
| Disvacryl-1012 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1012 is an acrylic polyol resin. This product includes xylene as a volatile byproduct. It can be used in acrylic isocyanate systems for wood finishes, industrial coatings, and vehicle refinishes. It can also be used in high performance and ch...veja mais Disvacryl-1012 is an acrylic polyol resin. This product includes xylene as a volatile byproduct. It can be used in acrylic isocyanate systems for wood finishes, industrial coatings, and vehicle refinishes. It can also be used in high performance and chemically-resistant polyurethane coatings. veja menos | |
| Disvacryl-1014 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1014 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in automotive refinishes, wood coatings, industrial coatings, and chemically resistant high-performance polyurethane co...veja mais Disvacryl-1014 is an acrylic polyol resin. This product includes xylene and cellosolve acetate as volatile byproducts. It can be used in automotive refinishes, wood coatings, industrial coatings, and chemically resistant high-performance polyurethane coatings. veja menos | |
| Disvacryl-1019 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1019 is an acrylic polyol resin. This product includes xylene as a volatile byproduct. It can be used in fast-drying polyurethane coatings with good UV resistance. It can also be used in wood coatings. | |
| Disvalkyd-542 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-542 is an alkyd resin made with short-length oils. This product derives from soybean oils and a mixture of glycerine and penta polyols. It can be used in stoving enamels and acid or cold-cured wood finishes. | |
| Domacryl 0769 45 Wa/BG/SA | HELIOS RESINS | Domacryl 0769 45 Wa/BG/SA is a secondary acrylic dispersion with a medium OH number. This resin was developed as a polyol component for cost-efficient 2K PUR aqueous clear and top coats for wood, plastic, and metal surfaces. Excellent applicability, resis...veja mais Domacryl 0769 45 Wa/BG/SA is a secondary acrylic dispersion with a medium OH number. This resin was developed as a polyol component for cost-efficient 2K PUR aqueous clear and top coats for wood, plastic, and metal surfaces. Excellent applicability, resistance, and appearance are achieved in combination with water-emulsifiable polyisocyanates (e.g. hydrophilically modified HDI-based polyisocyanates). veja menos | |
| Domacryl 5451 50 BAc | HELIOS RESINS | Domacryl 5451 50 BAc is a premium multi-purpose hydroxy acrylic resin with a very long pot-life and a super-fast hardness development. This resin is designed for TOP PERFORMANCE 2K PUR air or forced drying system wood primers, industrial furniture finishi...veja mais Domacryl 5451 50 BAc is a premium multi-purpose hydroxy acrylic resin with a very long pot-life and a super-fast hardness development. This resin is designed for TOP PERFORMANCE 2K PUR air or forced drying system wood primers, industrial furniture finishing, and car refinish fillers. veja menos | |
| Domalkyd 0545 40 Wa | HELIOS RESINS | Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-base...veja mais Domalkyd 0545 40 Wa is a PU-modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and one coat paints for industrial application on wood, steel, and aluminum with excellent gloss retention and elasticity. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance approach as certified by the ISCC PLUS). veja menos | |
| Domemul AA 9672 | HELIOS RESINS | Domemul AA 9672 is a core-shell APEO-free acrylic emulsion designed for industrial and decorative waterborne wood coatings, interior and exterior. This resin is especially recommended for DIY and joinery non-yellowing enamels with good water and blocking ...veja mais Domemul AA 9672 is a core-shell APEO-free acrylic emulsion designed for industrial and decorative waterborne wood coatings, interior and exterior. This resin is especially recommended for DIY and joinery non-yellowing enamels with good water and blocking resistance. veja menos | |
| Domemul AA 9673 | HELIOS RESINS | Domemul AA 9673 is a self-crosslinking APEO-free acrylic emulsion designed for industrial and decorative waterborne wood coatings, interior and exterior. This resin is recommended for furniture, joinery, and decorative application, with no yellowing, good...veja mais Domemul AA 9673 is a self-crosslinking APEO-free acrylic emulsion designed for industrial and decorative waterborne wood coatings, interior and exterior. This resin is recommended for furniture, joinery, and decorative application, with no yellowing, good alkaline resistance, good wetting, low foaming, fast drying, and very good blocking resistance. veja menos | |
| Domemul AA 9674 | HELIOS RESINS | Domemul AA 9674 is a self-crosslinking APEO-free acrylic emulsion with OH-functionality designed for industrial waterborne wood coatings for interior, 1K and 2K wood varnishes. This resin is especially recommended for furniture and joinery, non-yellowing ...veja mais Domemul AA 9674 is a self-crosslinking APEO-free acrylic emulsion with OH-functionality designed for industrial waterborne wood coatings for interior, 1K and 2K wood varnishes. This resin is especially recommended for furniture and joinery, non-yellowing enamels. veja menos | |
| GENOMER* 2235 | Rahn AG | GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product...veja mais GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. veja menos | Request Sample |
| GENOMER* 2252 | Rahn AG | GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpr...veja mais GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings and adhesives. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. veja menos | Request Sample |
| GENOMER* 2252/TM20 | Rahn AG | GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...veja mais GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. veja menos | Request Sample |
| GENOMER* 2252/TP20 | Rahn AG | GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...veja mais GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. veja menos | Request Sample |
| GENOMER* 2252/TP30 | Rahn AG | GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...veja mais GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. veja menos | Request Sample |
| GENOMER* 2252/TP40 | Rahn AG | GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...veja mais GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. veja menos | Request Sample |
| GENOMER* 2259 | Rahn AG | GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the...veja mais GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; coatings for paper, board and plastics; and wood coatings. veja menos | Request Sample |
| GENOMER* 2263 | Rahn AG | GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, scr...veja mais GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, screen inks and varnishes, and wood plastic, and paper coatings. veja menos | Request Sample |
| GENOMER* 2280 | Rahn AG | GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared t...veja mais GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared to standard bisphenol A epoxy acrylates, GENOMER* 2280 offers greater flexibility and toughness while maintaining fast cure response, high resistance properties and high hardness. veja menos | Request Sample |
| GENOMER* 3364 | Rahn AG | GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coat...veja mais GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. veja menos | Request Sample |
| GENOMER* 3414 | Rahn AG | GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; ...veja mais GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. veja menos | Request Sample |
| GENOMER* 3430 | Rahn AG | GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...veja mais GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. veja menos | Request Sample |
| GENOMER* 3457 | Rahn AG | GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and var...veja mais GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and varnishes, industrial coatings and adhesives, and additive manufacturing applications. veja menos | Request Sample |
| GENOMER* 3486 | Rahn AG | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...veja mais GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. veja menos | Request Sample |
| GENOMER* 3497 | Rahn AG | GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coat...veja mais GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coatings, printing inks and varnishes for plastic foils and protective coatings for metals. veja menos | Request Sample |
| GENOMER* 4217 | Rahn AG | GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulati...veja mais GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulations producing strong, but still flexible films. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastic and metal; wood coatings; flexo inks; and screen inks. veja menos | Request Sample |
| GENOMER* 4312 | Rahn AG | GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and pla...veja mais GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and plastics; wood and industrial coatings; and adhesives. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. veja menos | Request Sample |
| GENOMER* 4312TF | Rahn AG | GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing in...veja mais GENOMER* 4312TF is an aliphatic polyester urethane acrylate. It offers excellent reactivity, especially in pigmented systems. It also imparts good abrasion and solvent resistance, low odor, and good flexibility. This product is recommended for printing inks and varnishes, varnishes for paper, board, and plastics, for wood and industrial coatings, and for adhesives. veja menos | Request Sample |
| GENOMER* 4316 | Rahn AG | GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood an...veja mais GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. veja menos | Request Sample |
| GENOMER* 4425 | Rahn AG | GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are require...veja mais GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are required. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastics and metal; wood coatings; flexo inks; and screen inks. veja menos | Request Sample |
| GENOMER* 4514 | Rahn AG | GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...veja mais GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. veja menos | Request Sample |
| GENOMER* 4590/PP | Rahn AG | GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks ...veja mais GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; and wood and industrial coatings. The low viscosity in combination with the high functionality allows for an easy product handling. veja menos | Request Sample |
| GENOMER* 4622 | Rahn AG | GENOMER* 4622 is an aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: wood coatings; offset inks; and industrial coatings. It is typically used ...veja mais GENOMER* 4622 is an aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: wood coatings; offset inks; and industrial coatings. It is typically used in concentrations from 5 up to 50% in association with urethane, polyester or epoxy acrylates. veja menos | Request Sample |
| GENOMER* 4690 | Rahn AG | GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems whe...veja mais GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. This product is specifically recommended for use in the following applications: hard coats on plastic; top coats on wood; and coatings on paper, board, wood and plastics. veja menos | Request Sample |
| GENOMER* 4691 | Rahn AG | GENOMER* 4691 is an aliphatic urethane hexaacrylate. GENOMER* 4691 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. | Request Sample |
| GENOMER* 7151 | Rahn AG | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use...veja mais GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. veja menos | Request Sample |
| JL-12A | Zhuhai Jelee Chemical Industry Enterprise Co., Ltd. | JL-12A is a milky blue translucent liquid, styrene-acrylic emulsion; that is synthesized by the method design core-shell structure in latex particles. This product is designed to have a wide spread of uses. This product provides water and abrasion resista...veja mais JL-12A is a milky blue translucent liquid, styrene-acrylic emulsion; that is synthesized by the method design core-shell structure in latex particles. This product is designed to have a wide spread of uses. This product provides water and abrasion resistance. JL-12A is primarily used for waterborne wood primer and water paper light veja menos | |
| Joncryl® 1980 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 1980 is a self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1980 emulsion offers excellent clarity, low foaming, and excellent crack resist...veja mais Joncryl® 1980 is a self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1980 emulsion offers excellent clarity, low foaming, and excellent crack resistance. The chemical resistance of Joncryl® 1980 emulsion may allow its use in other applications, such as concrete coatings, specialty hardboard and plastics. veja menos | |
| Joncryl® 1982 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 1982 emulsion is a one package, self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1982 emulsion offers excellent clarity, low foaming, and ...veja mais Joncryl® 1982 emulsion is a one package, self-crosslinking acrylic emulsion that is non- formaldehyde emitting. A key use is for wood coatings that require resistance to various chemicals. Joncryl® 1982 emulsion offers excellent clarity, low foaming, and excellent crack resistance. The chemical resistance of Joncryl® 1982 emulsion may allow its use in other applications, such as concrete coatings, specialty hardboard and plastics. veja menos | |
| Joncryl® 8224 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8224 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. Specifically, it is developed for application in clear primers and topcoats for furniture and flatstock. Due to it...veja mais Joncryl® 8224 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. Specifically, it is developed for application in clear primers and topcoats for furniture and flatstock. Due to its excellent stackability, drying speed and fast hardness development, Joncryl® 8224 can be used in high speed lines. This product has good adhesion to a variety of substrates, including melamine, UV coated substrates and galvanized metal. Joncryl® 8224 has excellent (hot) block resistance, fast stackability, fast hardness development and good chemical resistance. veja menos | |
| Joncryl® 8284 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8284 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. It was designed to use as a fast drying industrial primer for the timber industry to coat prefab window frames, do...veja mais Joncryl® 8284 is a rheology controlled acrylic emulsion for use in industrial applied lacquers for furniture and flatstock or metal primers. It was designed to use as a fast drying industrial primer for the timber industry to coat prefab window frames, doors and wooden trim. Joncryl® 8284 is a Rheology Controled emulsion exhibiting the typical properties resulting from this technology, which includes good flow and leveling, low foaming, and good shear and temperature stability. Joncryl® 8284 has good tannin isolating properties when used on tropical hardwoods. veja menos | |
| Joncryl® 8330 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8330 is a self-crosslinking acrylic emulsion. It shows very good appearance (high clarity), excellent block and chemical resistance. This product is recommended for high-quality clear and pigmented water-based wood coatings. | |
| Joncryl® 95 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 95 is an acrylic emulsion polymer for industrial waterborne wood stains. It is an ultra-fine particle size acrylic emulsion designed for use in wood stain applications. Joncryl® 95 provides solution-like appearance and penetration properties alon...veja mais Joncryl® 95 is an acrylic emulsion polymer for industrial waterborne wood stains. It is an ultra-fine particle size acrylic emulsion designed for use in wood stain applications. Joncryl® 95 provides solution-like appearance and penetration properties along with reduced grain raising. veja menos | |
| Joncryl® HYB 6336 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® HYB 6336 is a cost effective, ecological “NMP”-free aliphatic polyurethane acrylic hybrid (HYB) for high-quality water-based clear coats on wood. It is developed for application in clear topcoats for high-quality industrial wood coatings. Due to ...veja mais Joncryl® HYB 6336 is a cost effective, ecological “NMP”-free aliphatic polyurethane acrylic hybrid (HYB) for high-quality water-based clear coats on wood. It is developed for application in clear topcoats for high-quality industrial wood coatings. Due to its excellent appearance, drying speed and resistance properties, Joncryl® HYB 6336 is suitable to replace solvent-based coatings in high-quality finishes. This product has excellent appearance and clarity, good chemical resistance, fast hardness development and scratch resistance. veja menos | |
| L-3711 | Chan Sieh Enterprises Co, Ltd. | L-3711 is an aqueous, highly transparent polyurethane acrylate copolymer that provides good chemical and abrasion resistance. This product can be used in industrial wood coating applications. | |
| L-3722 | Chan Sieh Enterprises Co, Ltd. | L-3722 is an aqueous, hard polyurethane acrylate copolymer that provides good chemical and blocking resistance. This product can be used in industrial wood coating applications. | |
| L-3728 | Chan Sieh Enterprises Co, Ltd. | L-3728 is an aqueous, glossy and transparent polyurethane acrylate copolymer that provides good chemical and abrasion resistance. This product can be used in industrial wood coating applications. | |
| L-3926 | Chan Sieh Enterprises Co, Ltd. | L-3926 is an aqueous polyurethane acrylate copolymer that provides good water, chemical, and imprint resistance, as well as good sandability. This product can be used in industrial wood coating applications. | |
| L-3935 | Chan Sieh Enterprises Co, Ltd. | L-3935 is a tough, flexible, clear aqueous polyurethane acrylate copolymer that provides high water, alcohol, chemical, and abrasion resistances. This product can be used in industrial wood coatings & varnishes, parquet lacquers, concrete floor coatings, ...veja mais L-3935 is a tough, flexible, clear aqueous polyurethane acrylate copolymer that provides high water, alcohol, chemical, and abrasion resistances. This product can be used in industrial wood coatings & varnishes, parquet lacquers, concrete floor coatings, and metal coatings. veja menos | |
| L-3952 | Chan Sieh Enterprises Co, Ltd. | L-3952 is an aqueous polyurethane acrylate copolymer that provides excellent chemical resistance and BHMR. This product can be used in flat parquet lacquers, printing inks, and decorative paints. | |
| L-3958 | Chan Sieh Enterprises Co, Ltd. | L-3958 is an aqueous polyurethane acrylate copolymer that provides excellent chemical resistance and very flexible film properties. This product can be used in applications such as clearcoats for flexible substrate surfaces and cork floor lacquers. | |
| L-3965 | Chan Sieh Enterprises Co, Ltd. | L-3965 is an aqueous, glossy and transparent polyurethane acrylate copolymer that provides good chemical, solvent, and abrasion resistance. This product can be used in applications such as parquet lacquers and industrial wood primers and topcoats. | |
| L-3973 | Chan Sieh Enterprises Co, Ltd. | L-3973 is an aqueous, highly transparent polyurethane acrylate copolymer that provides good chemical and abrasion resistance. This product can be used in industrial wood coating applications. | |
| Liocryl XAM 2827 | Synthopol Chemie Germany | Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is ...veja mais Liocryl XAM 2827 is a self-crosslinking pure acrylic emulsion with a high crosslinking degree. It is particularly suitable for the formulation of 1C wood coatings especially in combination with appropriate Liopur polyurethane dispersions. The emulsion is preserved for storage. It contains no solvents or plasticisers and no formaldehyde or formaldehyde-releasing products. The emulsion contains no alkyl phenol ethoxylates (APEO’s). veja menos | |
| Luhydran® A 848 S | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topco...veja mais Luhydran® A 848 S is a self-crosslinking workhorse acrylic emulsion for interior wood coating applications. This white emulsion is suitable for furniture applications with very good chemical and water resistance. It is primarily used for primers and topcoats for both clear and pigmented systems for wooden furniture board. Luhydran® A 848 S can also be used for plastics and fiber cement board. In blends with polyurethane dispersions, it provides excellent adhesion for wood floor coatings. Luhydran® A 848 S is recommended for applications such as: interior wood coatings for furniture or millwork applications; and general purpose and commercial interior coating applications. veja menos | |
| Luhydran® S938T | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® S938T is an aqueous, self- and externally crosslinking dispersion of a copolymer of acrylates and methacrylates as well as styrene, containing hydroxyl groups. It is used for the formulation of furniture films, heat-curing coatings on metals and...veja mais Luhydran® S938T is an aqueous, self- and externally crosslinking dispersion of a copolymer of acrylates and methacrylates as well as styrene, containing hydroxyl groups. It is used for the formulation of furniture films, heat-curing coatings on metals and non-metals and for two-pack polyurethane finishes. Luhydran® S 938 T self-crosslinks at baking temperatures above 150 °C (302 F). No formaldehyde is released. External crosslinking with urea- and melamine-formaldehyde resins can be brought about by the action of heat alone or – preferably – in combination with an acid catalyst. Curing with a polyisocyanate is possible at room temperature. Coatings made with Luhydran® S 938 T are hard, fast to light, resistant to blocking and hydrolysis and very resistant to household chemicals. veja menos | |
| Luhydran® S945T | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Luhydran® S945T is an APEO-formaldehyde-free OH functional crosslinkable emulsion for interior and exterior coatings on wood, plastic, metal, concrete and glass. This slightly yellow anionic product has a broad compatibility with a wide range of polyisocy...veja mais Luhydran® S945T is an APEO-formaldehyde-free OH functional crosslinkable emulsion for interior and exterior coatings on wood, plastic, metal, concrete and glass. This slightly yellow anionic product has a broad compatibility with a wide range of polyisocynates and melamine resins which gives it flexible crosslinking functionality. veja menos | |
| Mowinyl 7470 | Nippon Gohsei | Mowinyl 7470 is a synthetic acrylic resin emulsion with an added auxiliary filming agent. Featuring improved crosslinking and good pigment mixing stability, this product is well suited for use in paints and coatings for woodworking and exterior applicatio...veja mais Mowinyl 7470 is a synthetic acrylic resin emulsion with an added auxiliary filming agent. Featuring improved crosslinking and good pigment mixing stability, this product is well suited for use in paints and coatings for woodworking and exterior applications. veja menos | |
| Neboplast® HMB 6030 | NECARBO B.V. | Neboplast® HMB 6030 is an acrylic copolymer dispersion in water with free hydroxyl groups. This white liquid is solvent and plasticizer free, chemical resistant, non-yellowing, and is suitable for water borne two-component lacquers. Neboplast® HMB 6030 ca...veja mais Neboplast® HMB 6030 is an acrylic copolymer dispersion in water with free hydroxyl groups. This white liquid is solvent and plasticizer free, chemical resistant, non-yellowing, and is suitable for water borne two-component lacquers. Neboplast® HMB 6030 can be used with water emulsifiable isocyanates, and finds application in two component wood and furniture lacquers. veja menos | |
| Neboplast® HMB 6530 | NECARBO B.V. | Neboplast® HMB 6530 is an acrylic copolymer dispersion in water with free hydroxyl groups. This white liquid is solvent, plasticizer, and alkylphenolethoxylate free, chemical resistant, non-yellowing, and is suitable for water borne two-component lacquers...veja mais Neboplast® HMB 6530 is an acrylic copolymer dispersion in water with free hydroxyl groups. This white liquid is solvent, plasticizer, and alkylphenolethoxylate free, chemical resistant, non-yellowing, and is suitable for water borne two-component lacquers. Neboplast® HMB 6530 can be used with water emulsifiable isocyanates, and finds application in two component wood and furniture lacquers. veja menos | |
| Neboplast® MB 6060 | NECARBO B.V. | Neboplast® MB 6060 is an aqueous copolymer dispersion of acrylic esters. This white liquid has low MFFT, is tack free with a transparent film, is alkali, water, and yellowing resistant, and has a fine particle size. Neboplast® MB 6060 has blocking and res...veja mais Neboplast® MB 6060 is an aqueous copolymer dispersion of acrylic esters. This white liquid has low MFFT, is tack free with a transparent film, is alkali, water, and yellowing resistant, and has a fine particle size. Neboplast® MB 6060 has blocking and resistance and high gloss, and finds application in solvent-free interior and exterior coatings, and in the formulation of decorative wood coatings and stains. veja menos | |
| Neboplast® MB 6537 | NECARBO B.V. | Neboplast® MB 6537 is an aqueous self-crosslinking copolymer dispersion of acrylic esters. This white liquid is chemical and block resistant, non-yellowing, APE free, and has low water absorption. Neboplast® MB 6537 adheres to wood and finds application i...veja mais Neboplast® MB 6537 is an aqueous self-crosslinking copolymer dispersion of acrylic esters. This white liquid is chemical and block resistant, non-yellowing, APE free, and has low water absorption. Neboplast® MB 6537 adheres to wood and finds application in high quality wood stains and varnishes. veja menos | |
| Neboplast® MB 6557 | NECARBO B.V. | Neboplast® MB 6557 is an aqueous copolymer dispersion of acrylic esters. This white liquid is alkylphenolethoxylate free and delivers good blocking resistance, high elasticity & transparency, and low water absorption. Neboplast® MB 6557 finds use in high ...veja mais Neboplast® MB 6557 is an aqueous copolymer dispersion of acrylic esters. This white liquid is alkylphenolethoxylate free and delivers good blocking resistance, high elasticity & transparency, and low water absorption. Neboplast® MB 6557 finds use in high quality coatings for indoor and outdoor applications, as well as in transparent and pigmented coatings and stains for decorative and joinery applications. veja menos | |
| Neboplast® SB 6515 | NECARBO B.V. | Neboplast® SB 6515 is an aqueous styrene-acrylic copolymer dispersion. This white liquid produces a hard, transparent film, is compatible with polyurethane dispersions, is alkylphenolethoxylate free, has abrasion, water, and plasticizer resistant, and is ...veja mais Neboplast® SB 6515 is an aqueous styrene-acrylic copolymer dispersion. This white liquid produces a hard, transparent film, is compatible with polyurethane dispersions, is alkylphenolethoxylate free, has abrasion, water, and plasticizer resistant, and is cosolvent and plasticizer free. Neboplast® SB 6515 is suitable for use in wood and plastic coatings and wood varnishes, and finds application as a binder in wood and parquet floor varnishes. veja menos | |
| Neboplast® SB 6527 | NECARBO B.V. | Neboplast® SB 6527 is an aqueous styrene-acrylic copolymer dispersion. This white liquid is alkylphenolethoxylate, solvent, and plasticizer free, adheres well to metal, and provides good corrosion resistance. Neboplast® SB 6527 finds application as a bind...veja mais Neboplast® SB 6527 is an aqueous styrene-acrylic copolymer dispersion. This white liquid is alkylphenolethoxylate, solvent, and plasticizer free, adheres well to metal, and provides good corrosion resistance. Neboplast® SB 6527 finds application as a binder in anti-corrosive primers, matte to glossy metal and wood coatings, and hybrid paint formulations. veja menos | |
| Neboplast® SB 8538 | NECARBO B.V. | Neboplast® SB 8538 is an aqueous styrene-acrylic copolymer dispersion free from plasticizers and solvents. This white liquid has pigment and binding properties, resistance against alkali and water, is free of alkylphenolethoxylates, and adheres to metal, ...veja mais Neboplast® SB 8538 is an aqueous styrene-acrylic copolymer dispersion free from plasticizers and solvents. This white liquid has pigment and binding properties, resistance against alkali and water, is free of alkylphenolethoxylates, and adheres to metal, wood, and mineral surfaces. Neboplast® SB 8538 develops a tack free transparent film, and finds application as a binder in high quality wall paints, tack-free, anti-corrosive primers and finishes, and in wood and parquet coatings. veja menos | |
| Nebores® HEA 19-65 XBA | NECARBO B.V. | Nebores® HEA 19-65 XBA is a hydroxyl functional acrylic resin. This light yellow liquid consists of 65% xylene and butyl acetate and provides quick drying, broad compatibility, high gloss and low viscosity. Nebores® HEA 19-65 XBA finds application in furn...veja mais Nebores® HEA 19-65 XBA is a hydroxyl functional acrylic resin. This light yellow liquid consists of 65% xylene and butyl acetate and provides quick drying, broad compatibility, high gloss and low viscosity. Nebores® HEA 19-65 XBA finds application in furniture and plastic coatings. veja menos | |
| Nebores® HEA 20-50 XBA | NECARBO B.V. | Nebores® HEA 20-50 XBA is a hydroxyl functional acrylic resin. This light yellow liquid consists of 50% xylene and butyl acetate, and is fast drying, has broad compatibility, and early blocking resistance. Nebores® HEA 20-50 XBA finds application in furni...veja mais Nebores® HEA 20-50 XBA is a hydroxyl functional acrylic resin. This light yellow liquid consists of 50% xylene and butyl acetate, and is fast drying, has broad compatibility, and early blocking resistance. Nebores® HEA 20-50 XBA finds application in furniture and plastic coatings. veja menos | |
| Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...veja mais Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. veja menos | |
| POLYESTER ACRYLATE 03-849 | Rahn AG | POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in print...veja mais POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in printing inks and varnishes, overprint varnishes, plastic coatings and wood and industrial coatings. veja menos | Request Sample |
| SETAQUA® 6756 | Allnex | SETAQUA® 6756 is a surfactant free aqueous dispersion of acrylic polymers for highly durable furniture finishes, belonging to our ECOWISE™ CHOICE product range for selected applications. | Request Sample |
| SETAQUA® 6781 | Allnex | SETAQUA® 6781 is an aqueous dispersion of acrylic polymers with gradient particle morphology. Its features include excellent blocking resistance, good application properties and high gloss. This product is suitable for air-drying interior and exterior pig...veja mais SETAQUA® 6781 is an aqueous dispersion of acrylic polymers with gradient particle morphology. Its features include excellent blocking resistance, good application properties and high gloss. This product is suitable for air-drying interior and exterior pigmented wood finishes for the joinery industry. veja menos | Request Sample |
| U-1839R | Add and Poly Resin Industrial Co., Ltd. | U-1839R is an acrylic polyol resin that has good pigment dispersion, adhesion, scratch resistance, fast drying, and anti-sagging properties. This product is well suited for wood, metals, and plastic as the base coat and matte top coat. | |
| U-1933R | Add and Poly Resin Industrial Co., Ltd. | U-1933R is a solvent-based acrylic resin for polyurethanes. It has good scratch resistance, good transparency of dried film, is fast drying, and has a uniform matting effect. This product is well suited for top clear coating on wood, metal, and plastic. | |
| U-2811S | Add and Poly Resin Industrial Co., Ltd. | U-2811S is an acrylic polyol that has high solid and high film build, good gloss and gloss retention, good dispersion effect, and high hardness. It can be used with synthetic fatty acid alkyd or polyester resin for final film properties. This product is w...veja mais U-2811S is an acrylic polyol that has high solid and high film build, good gloss and gloss retention, good dispersion effect, and high hardness. It can be used with synthetic fatty acid alkyd or polyester resin for final film properties. This product is well suited for wood and metal coatings. veja menos | |
| U-2812S | Add and Poly Resin Industrial Co., Ltd. | U-2812S is an acrylic polyol resin compatible with polyesters and alkyds of synthetic fatty acids, coconut oils, and soy bean oils. It can be used to improve drying speed, hardness, polish resistance, solvent resistance, and yellowing resistance for conve...veja mais U-2812S is an acrylic polyol resin compatible with polyesters and alkyds of synthetic fatty acids, coconut oils, and soy bean oils. It can be used to improve drying speed, hardness, polish resistance, solvent resistance, and yellowing resistance for conventional polyurethane coatings and baking enamels. This product is well suited for wood and metal coatings. veja menos | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | O WorléeCryl® 7135 é uma emulsão de copolímero acrílico de estireno. Ele é utilizado para acabamentos superiores em metal, madeira e plásticos (PS, ABS). Este produto se destina também a primers anticorrosivos temporários sobre metal, e pode ser combinado...veja mais O WorléeCryl® 7135 é uma emulsão de copolímero acrílico de estireno. Ele é utilizado para acabamentos superiores em metal, madeira e plásticos (PS, ABS). Este produto se destina também a primers anticorrosivos temporários sobre metal, e pode ser combinado com resinas alquídicas diluíveis em água. Este grau é fornecido sob a forma de 42% em água. veja menos |
