Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
Acetylated Distarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 | Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...veja mais Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. veja menos | |
ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
ADDITOL® VXW 4934 | Allnex | Additol® VXW 4934 é um aditivo para tintas hidrossolúveis usado para a prevenção de sedimentação do pigmento, para o melhoramento do enfraquecimento nas bordas durante a aplicação a imersão e para melhorar o limite de “sagging” durante a aplicação com spr...veja mais Additol® VXW 4934 é um aditivo para tintas hidrossolúveis usado para a prevenção de sedimentação do pigmento, para o melhoramento do enfraquecimento nas bordas durante a aplicação a imersão e para melhorar o limite de “sagging” durante a aplicação com spray. veja menos | Request Sample |
ADDITOL® VXW 6360 | Allnex | Additol® VXW 6360 é um espessante poliuretano para tintas base água com secagem ao ar. Possui excelentes propriedades reológicas que melhoram o fluxo, o nivelamento, a formação do film e melhora a aplicação com pincel. | Request Sample |
ADDITOL® VXW 6388 | Allnex | Engrossante de poliuretano para sistemas de revestimentos aquosos, de secagem à ar. | Request Sample |
ADDITOL® XL 280 | Allnex | Pasta líquida anti-sedimentação com propriedades umectantes para pigmentos, com base em uma argila de montmorillonita especialmente modificada. | Request Sample |
ADDITOL® XL 6557 | Allnex | O Additol® XL 6557 é um meio de moagem polimérico reticulável. Proporciona umedecimento de pigmentos, baixa viscosidade nas massas e boa estabilização dos pigmentos nas massas. Os revestimentos acabados tingidos com este produto têm uma alta dureza, uma r...veja mais O Additol® XL 6557 é um meio de moagem polimérico reticulável. Proporciona umedecimento de pigmentos, baixa viscosidade nas massas e boa estabilização dos pigmentos nas massas. Os revestimentos acabados tingidos com este produto têm uma alta dureza, uma resistência ao amarelecimento, alto brilho, boas propriedades de secagem e boa resistência à água/ intempéries. É recomendado para aplicações industriais a base de solventes, tais como revestimento de bobinas, tintas anti-corrosivas marítimas e de trabalho pesado, agricultura, madeira industrial e demais revestimentos metálicos. veja menos | Request Sample |
AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 é uma dispersão de AEROSIL® hidrofóbico, especial, estruturada, altamente preenchida. Torna possível, facilmente e eficazmente, melhorar o engrossamento e a tixotropia e as propriedades anti-sedimentação, estabilização do pigmento bem co...veja mais AERODISP® WR 8520 é uma dispersão de AEROSIL® hidrofóbico, especial, estruturada, altamente preenchida. Torna possível, facilmente e eficazmente, melhorar o engrossamento e a tixotropia e as propriedades anti-sedimentação, estabilização do pigmento bem como propriedades mecânicas, em revestimentos pigmentados aquosos e revestimentos transparentes à base de água. veja menos | Request Sample |
AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica hidrofílica com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, alimentos e cosméticos, compostos para cabo e géis, borracha de silicone e na proteção d...veja mais Uma sílica pirogênica hidrofílica com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, alimentos e cosméticos, compostos para cabo e géis, borracha de silicone e na proteção de planta. veja menos | Request Sample |
AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica hidrofílica com uma área de superfície específica de 300 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, compostos para cabos e em borracha de silicone. | Request Sample |
AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica hidrofílica com uma área de superfície específica de 380 m²/g. É utilizada em tintas e revestimentos, adesivos e seladores, tintas de impressão, compostos para cabos e borracha de silicone. | Request Sample |
AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...veja mais AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. veja menos | Request Sample |
AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | Um sílica pirogênica pós-tratada com um polidimetilsiloxano. | Request Sample |
AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...veja mais AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. veja menos | Request Sample |
AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica pós-tratada com um octil silano baseado em AEROSIL® 200. É utilizada em tintas e revestimentos, adesivos e seladores e sistemas multi-camadas de epóxi. | Request Sample |
AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | Um sílica pirogênica pós-tratada com HMDS baseado em AEROSIL® 300. É utilizada em tintas e revestimentos, borracha de silicone e adesivos e seladores. | Request Sample |
AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | Uma sílica pirogênica pós-tratada com um hexadecil silano baseado em AEROSIL® 200. É utilizado em sistemas de revestimentos à base de água. | Request Sample |
AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 é um sílica pirogênica pós-tratada com DDS (dimetildiclorossilano). É utilizada em borracha e seladores de silicone, tintas e revestimentos, tintas de impressão, tôners, adesivos, compostos para cabos e géis, proteção de planta. | Request Sample |
AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 é um sílica pirogênica hidrofóbica pós-tratada com o DDS (dimetildiclorossilano), baseada em uma sílica pirogênica hidrofílica, com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, borracha e seladores d...veja mais AEROSIL® R 974 é um sílica pirogênica hidrofóbica pós-tratada com o DDS (dimetildiclorossilano), baseada em uma sílica pirogênica hidrofílica, com uma área de superfície específica de 200 m²/g. É utilizada em tintas e revestimentos, borracha e seladores de silicone, tôner negativo, adesivos, polímeros de revestimento. veja menos | Request Sample |
AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...veja mais AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. veja menos | Request Sample |
AT-152 | Antex Chemicals (Zhongshan) Limited | AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...veja mais AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. veja menos | |
AT-166 | Antex Chemicals (Zhongshan) Limited | AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...veja mais AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. veja menos | |
AT-288 | Antex Chemicals (Zhongshan) Limited | AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...veja mais AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. veja menos | |
BENATHIX® | Elementis 海名斯特殊化学 | BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...veja mais BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. veja menos | |
BENGEL® 434 | Elementis 海名斯特殊化学 | BENGEL® 434 rheological additive is a general purpose solvent organoclay (tetra-alkyl ammonium bentonite) designed for low to medium polarity aliphatic and aromatic coating systems. It also works fine in selective high polarity systems. | |
BENGEL® 818 | Elementis 海名斯特殊化学 | BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufac...veja mais BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufacturing process. veja menos | |
BENGEL® 828 | Elementis 海名斯特殊化学 | BENGEL® 828 is a rheological additive greatly simplifies the formulation and manufacture of paint systems contain moderate to high polarity solvents such as ketones, esters, glycol ethers, ether esters, alcohol. | |
BENGEL® 958 | Elementis 海名斯特殊化学 | BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...veja mais BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. veja menos | |
BENGEL® 988 | Elementis 海名斯特殊化学 | BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate ...veja mais BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate and can be added dry to the pigment grinding process without chemical activator or the preparation of a pregel. veja menos | |
BENTONE® 27 | Elementis 海名斯特殊化学 | BENTONE® 27 rheological additive is an organic solvent derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders. | |
BENTONE® 34 | Elementis 海名斯特殊化学 | BENTONE® 34 is an organic solvent derivative of a bentonite clay. This rheological additive is designed for low to intermediate polarity organic systems. | |
BENTONE SD® -1 | Elementis 海名斯特殊化学 | BENTONE SD®-1 rheological additive is an organic derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium-polarity solvents. | |
BENTONE SD® -2 | Elementis 海名斯特殊化学 | BENTONE SD®-2 rheological additive is an organic derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols. | |
BK-127 | LUKEM D.O.O. | BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...veja mais BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. veja menos | |
BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...veja mais BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. veja menos | |
BK–884A | LUKEM D.O.O. | BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...veja mais BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. veja menos | |
BK-923 | LUKEM D.O.O. | BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...veja mais BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. veja menos | |
BP®-183 | Zhejiang Huate New Material Co., Ltd. | BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also comm...veja mais BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also commonly used in mixed paints, paint fillers, sealants, and printing inks. veja menos | |
BP®-183B | Zhejiang Huate New Material Co., Ltd. | BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is al...veja mais BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is also commonly used in mixed paints, bitumen paints, chlorinated rubber paints, anticorrosion paints, epoxy paints, sealants, and printing inks. veja menos | |
BP®-184 | Zhejiang Huate New Material Co., Ltd. | BP®-184 is a solvent based organoclay additive with rheological properties that appears as a white, free flowing powder in appearance. This product is easy to disperse, and is commonly used in sealants, high-grade paints, and printing inks. | |
BP®-186 | Zhejiang Huate New Material Co., Ltd. | BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and print...veja mais BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. veja menos | |
BP®-186B | Zhejiang Huate New Material Co., Ltd. | BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and prin...veja mais BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. veja menos | |
BP®-186C | Zhejiang Huate New Material Co., Ltd. | BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, an...veja mais BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, and printing inks. veja menos | |
BP®-186D | Zhejiang Huate New Material Co., Ltd. | BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing in...veja mais BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing inks. veja menos | |
BP®-188L | Zhejiang Huate New Material Co., Ltd. | BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white,...veja mais BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white, free-flowing powder. It is commonly used in water-based ink, water-based coatings, and emulsion paints. veja menos | |
BP®-283 | Zhejiang Huate New Material Co., Ltd. | BP®-283 is a tetraallkyl ammonium bentonite based organoclay used in solvent-based systems of low to medium polarity. This product is also used as an anti-sagging agent in inks and adhesives. | |
BP®-286 | Zhejiang Huate New Material Co., Ltd. | BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks...veja mais BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks. veja menos | |
BP®-500 | Zhejiang Huate New Material Co., Ltd. | BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is co...veja mais BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is commonly applied in paints, coatings, inks, and adhesives. veja menos | |
BP®-923 | Zhejiang Huate New Material Co., Ltd. | BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, a...veja mais BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, anti-corrosion paints, and inks. veja menos | |
CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...veja mais CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. veja menos | |
CAB-O-SIL® TS610 | Cabot Corporation - Additives | CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...veja mais CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. veja menos | |
CAB-O-SPERSE® PG001 | Cabot Corporation - Additives | CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...veja mais CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. veja menos | |
CLAYTONE 34 | BYK 毕克 | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...veja mais CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. veja menos | |
CLAYTONE® 40 | BYK 毕克 | O Claytone® 40 é um derivado da bentonita organofílica, que é utilizada como agente espessante tixotrópico e agente anti-decantação em sistemas de revestimentos baseados em solventes de baixa a média polaridade. É uma argila organofílica tradicional que e...veja mais O Claytone® 40 é um derivado da bentonita organofílica, que é utilizada como agente espessante tixotrópico e agente anti-decantação em sistemas de revestimentos baseados em solventes de baixa a média polaridade. É uma argila organofílica tradicional que exige a adição de um ativador para alcançar a eficiência completa. Como produto esmectita organofílico, ele pode inchar em meios orgânicos e construir uma estrutura de gel (estrutura da de casa cartão). As ligações de hidrogênio fracas entre as plaquetas individuais de esmectite são a razão para esta estrutura de gel tixotrópico. Para uma ótima eficiência é necessária a separação completa das plaquetas (dispersão completa dos aglomerados em partículas primárias). veja menos | |
CLAYTONE® AF | BYK 毕克 | O Claytone® AF é uma montmorilonita modificada projetada para uso em sistemas contendo solventes alifáticos e misturas de solventes alifático-aromáticos que exibem baixa a média polaridade. O Claytone® AF produz viscosidade reprodutível e desenvolvimento ...veja mais O Claytone® AF é uma montmorilonita modificada projetada para uso em sistemas contendo solventes alifáticos e misturas de solventes alifático-aromáticos que exibem baixa a média polaridade. O Claytone® AF produz viscosidade reprodutível e desenvolvimento tixotrópico, um alto grau de controle de decaimento e impede a decantação do pigmento. O Claytone® AF é auto-dispersante e não requer um ativador polar. O Claytone® AF elimina a necessidade de cisalhamento elevado ou pré-géis. veja menos | |
CLAYTONE® APA | BYK 毕克 | O Claytone® APA é uma montmorilonita modificada projetada para uso em sistemas contendo solvente aromático ou misturas de solventes aromático-oxigenados que apresentam média a alta polaridade. O Claytone® APA demonstra alta eficiência de gelificação, visc...veja mais O Claytone® APA é uma montmorilonita modificada projetada para uso em sistemas contendo solvente aromático ou misturas de solventes aromático-oxigenados que apresentam média a alta polaridade. O Claytone® APA demonstra alta eficiência de gelificação, viscosidade reprodutível e desenvolvimento tixotrópico, um elevado grau de controle de descaimento e evita a decantação rígida de pigmentos e enchimentos. veja menos | |
CLAYTONE® HT | BYK 毕克 | O Claytone® HT é uma montmorilonita modificada projetada para uso em sistemas que contenham solventes aromáticos e alifáticos que apresentam baixa a média polaridade. O Claytone® HT demonstra alta eficiência de gelificação, viscosidade reprodutível e dese...veja mais O Claytone® HT é uma montmorilonita modificada projetada para uso em sistemas que contenham solventes aromáticos e alifáticos que apresentam baixa a média polaridade. O Claytone® HT demonstra alta eficiência de gelificação, viscosidade reprodutível e desenvolvimento tixotrópico, um elevado grau de controle de descaimento e evita a decantação rígida de pigmentos e enchimentos. Este produto é um aditivo reológico de alto desempenho para uso em tintas à base de óleo de alto desempenho e é especialmente adequado para revestimentos industriais, marinhos e de manutenção. veja menos | |
CLAYTONE® HY | BYK 毕克 | O Claytone® HY é uma montmorilonita modificada projetada para uso em tintas de impressão de polaridade baixa a média. O Claytone® HY demonstra alta eficiência de gelificação, aumenta a viscosidade e o valor de rendimento, evita a aglomeração e decantação ...veja mais O Claytone® HY é uma montmorilonita modificada projetada para uso em tintas de impressão de polaridade baixa a média. O Claytone® HY demonstra alta eficiência de gelificação, aumenta a viscosidade e o valor de rendimento, evita a aglomeração e decantação do pigmento, reduz a formação de névoa e permite que o fabricante de tinta controle a viscosidade da aderência. veja menos | |
CLAYTONE-40 | BYK 毕克 | O TIXOGEL® VP é um agente tixotrópico e anti-decantação para sistemas de baixa a média polaridade. Para alcançar a máxima eficiência, o TIXOGEL VP® deve ser disperso usando altas forças de cisalhamento. | |
CLAYTONE-EM | BYK 毕克 | CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE-ER | BYK 毕克 | CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE-IMG 400 | BYK 毕克 | CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities. | |
CLAYTONE-MPZ | BYK 毕克 | O TIXOGEL® MPZ é um produto da série organofílica Maximum Performance. É um espessante tixotrópico altamente eficiente e agente anti-decantação, que é usado em sistemas de média a alta polaridade. Via de regra, a adição de um ativador não é necessária em ...veja mais O TIXOGEL® MPZ é um produto da série organofílica Maximum Performance. É um espessante tixotrópico altamente eficiente e agente anti-decantação, que é usado em sistemas de média a alta polaridade. Via de regra, a adição de um ativador não é necessária em sistemas altamente polares, mas é benéfico em sistemas com polaridade média. veja menos | |
CLAYTONE-SF | BYK 毕克 | CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries. | |
CLAYTONE®-VZ | BYK 毕克 | O TIXOGEL® VZ é um agente tixotrópico e anti-decantação para sistemas polares. Para a máxima eficiência, o TIXOGEL® VZ deve ser incorporado sob cisalhamento alto. De preferência, o TIXOGEL® VZ deve ser adicionado à base da pulverização. Ele não tem grau p...veja mais O TIXOGEL® VZ é um agente tixotrópico e anti-decantação para sistemas polares. Para a máxima eficiência, o TIXOGEL® VZ deve ser incorporado sob cisalhamento alto. De preferência, o TIXOGEL® VZ deve ser adicionado à base da pulverização. Ele não tem grau pré-ativado e devem ser usados ativadores para proporcionar um desempenho ótimo. veja menos | |
DA-40A | Antex Chemicals (Zhongshan) Limited | DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
DA-40N | Antex Chemicals (Zhongshan) Limited | DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste. | |
Decoflux DP R 12 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...veja mais Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. veja menos | |
Decoflux DP R 24 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...veja mais Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. veja menos | |
DeuRheo 201P | Elementis 海名斯特殊化学 | DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks...veja mais DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks and aluminum paint. veja menos | |
DeuRheo 229 | Elementis 海名斯特殊化学 | DeuRheo 229 is pre-dispersed in a solvent of polyethylene amine wax, and has anti-settling of pigments and fillers in the coating system with a anti-sagging effect. | |
DeuRheo WT-102 | Elementis 海名斯特殊化学 | DeuRheo WT-102 is an aqueous associative thickener based on polyurethane. It provides higher viscosity at low shear rate. | |
DeuRheo WT-105A | Elementis 海名斯特殊化学 | DeuRheo WT-105A is an aqueous associative thickener based on polyurethane. Provide thickening and flowing. | |
DeuRheo WT-108 | Elementis 海名斯特殊化学 | DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents. | |
DeuRheo WT-108F | Elementis 海名斯特殊化学 | DeuRheo WT-108F is a nonionic synthetic associative thickener (NiSAT) for aqueous applications to increase medium shear viscosity and provide good flowing. It is designed to be free of Tin, APEO and organic solvents. | |
Dimer Acid | Anhui Elite Industrial Co., Ltd | Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...veja mais Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. veja menos | |
DISPERBYK®-2013 | BYK 毕克 | O DISPERBYK®-2013 é um umectante sem solventes e aditivo dispersante para sistemas 100% UV e sistemas UV à base de solventes e à base de água para tintas de impressão e revestimentos. Com base na sua polaridade de produto equilibrada e forma de administra...veja mais O DISPERBYK®-2013 é um umectante sem solventes e aditivo dispersante para sistemas 100% UV e sistemas UV à base de solventes e à base de água para tintas de impressão e revestimentos. Com base na sua polaridade de produto equilibrada e forma de administração 100%, o DISPERBYK-2013 alcança uma excelente estabilização, em particular em sistemas 100% UV e especialmente de pigmentos orgânicos e pigmentos negro de fumo. Ao fazê-lo, o produto tem um efeito de redução da viscosidade impressionante e eficaz, reduzindo simultaneamente o comportamento do fluxo tixotrópico. veja menos | |
FR50 | Sino-American Pigment Systems, Inc. | FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. veja menos | |
FR52 | Sino-American Pigment Systems, Inc. | FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. veja menos | |
FR54 | Sino-American Pigment Systems, Inc. | FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. veja menos | |
FR56 | Sino-American Pigment Systems, Inc. | FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR56, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 56 and 58 degrees Celsius. veja menos | |
FR58 | Sino-American Pigment Systems, Inc. | FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR58, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 58 and 60 degrees Celsius. veja menos | |
FR60 | Sino-American Pigment Systems, Inc. | FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR60, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 60 and 62 degrees Celsius. veja menos | |
FR62 | Sino-American Pigment Systems, Inc. | FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR62, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 62 and 64 degrees Celsius. veja menos | |
FR64 | Sino-American Pigment Systems, Inc. | FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...veja mais FR64, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 64 and 66 degrees Celsius. veja menos | |
Fumed Silica 972 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 972 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
Fumed Silica 974 | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica 974 is a white powdery substance. This product is primarily used as an additive in adhesives, paints, coatings, and printing inks. | |
Fumed Silica (A-150) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This produc...veja mais Fumed Silica (A-150) is a white and colloidal micro-particle that has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, inks, paints and coatings. veja menos | |
Fumed Silica (A-200) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...veja mais Fumed Silica (A-200) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. veja menos | |
Fumed Silica (A-380) | Shanghai Tengmin Industry Co., Ltd. | Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluor...veja mais Fumed Silica (A-380) is a white and colloidal micro-particle with its primary micro-particle from 5-40nm and has properties such as thixotropy, reinforcing, thickening and filling. It is insoluble in all kinds of solvents and liquids except for hydrofluoric acid and concentrated bases. This product is primarily used as an additive in construction sealants, printing inks, paints, and coatings. veja menos | |
Hakuenka® CCR-S10 | Shiraishi-Omya GmbH | Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning ch...veja mais Hakuenka® CCR-S10 is a precipitated calcium carbonate coated with fatty acids in order to improve the dispersion in organic binders. Hakuenka® CCR-S10 is used to modify and control the rheology of sealants and adhesives when a pronounced shear thinning characteristic is the objective. It promotes high yield values and remarkable flowability of the finished product at the same time. Hakuenka® CCR-S10 improves sag and slump resistance and renders reinforcing properties. In printing inks Hakuenka® CCR-S10 is used as a mineral additive. veja menos | |
HB-139 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...veja mais HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. veja menos | |
HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...veja mais HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. veja menos | |
HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...veja mais HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. veja menos |