| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM é uma SILFIT Z ativado 91, produzido pela modificação da superfície com silano funciona lamino . É usado como um preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. Um efeito ótimo será obtido em e...veja mais AKTIFIT AM é uma SILFIT Z ativado 91, produzido pela modificação da superfície com silano funciona lamino . É usado como um preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. Um efeito ótimo será obtido em elastômeros polares em combinação com enxofre ou contribuintes de enxofre, amina ou sistemas de reticulação bisfenolica. Pode ser usado sempre que elevada resistência à tração e módulo, combinada com uma tração muito baixa e um conjunto de compressão, que são tão importantes quanto suas excelentes propriedades de processamento e de extrusão. veja menos | |
| AKTIFIT PF 111 | Hoffmann Mineral | AKTIFIT PF 111 is a calcined product, treated with alkyl silane. It is recommended for electrophoretic coatings, corrosion protection coatings, plastic primers, and interior dispersion paints. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...veja mais AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). veja menos | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...veja mais AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). veja menos | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM é um SILFIT Z 91 ativado que pode ser usado como um material de preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. O melhor efeito é obtido em sistemas de ligantes que polimerizam ou curam devido...veja mais AKTIFIT VM é um SILFIT Z 91 ativado que pode ser usado como um material de preenchimento funcional, por conta própria ou combinado com extensores ou agentes de fosqueamento. O melhor efeito é obtido em sistemas de ligantes que polimerizam ou curam devido a uma reação iniciada de maneira radical. veja menos | |
| AKTISIL AM | Hoffmann Mineral | Um SILLITIN Z 86 ativado, produzido pela modificação da superfície com amino silano funcional. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL MAM | Hoffmann Mineral | Um SILLITIN V 88 ativado, produzido pela modificação da superfície com 3-metacriloxipropil-trimetoxi-silano. Pode ser utilizado como um enchimento (filler) funcional sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL MAM-R | Hoffmann Mineral | Um SILLITIN ativado V 85, produzido pela modificação da superfície com 3-metacriloxipropil-trimetoxi-silano. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL PF 216 | Hoffmann Mineral | AKTISIL PF 216 is an activated SILLITIN Z 86, produced by modifying the surface with Bis-(3-triethoxy-silylpropyl)-tetrasulfane. Used as a functional filler either on its own or in combination with another non-reinforcing or reinforcing filler. | |
| AKTISIL PF 777 | Hoffmann Mineral | Um SILLITIN Z 86 ativado, produzido pela modificação da superfície com silano alquilo. Utilizado como um enchimento (filler) funcional só, por si mesmo, ou em combinação com aditivos reológicos e/ou agentes de alisamento. | |
| AKTISIL Q | Hoffmann Mineral | AKTISIL Q is SILLITIN V 90* coated with methacryl silane. | |
| AKTISIL VM 56 | Hoffmann Mineral | Um SILLITIN Z 86 ativado, produzido pela modificação da superfície com vinil-trietoxi-silano. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| AKTISIL VM 56/89 | Hoffmann Mineral | AKTISIL VM 56/89 é um SILLITIN Z 89 ativado produzido pela modificação da superfície com silano 3-Vinyltriethoxy . Usado como carga funcional por conta própria ou combinado com extensores ou agentes de alisamento. | |
| DEUREX® E 08 | DEUREX AG | DEUREX® E 08 takes the form of fine white granules in a non-polar polyethylene wax that functions as a lubricant for non-polar pigment concentrates. A dispersing agent, it also has good matting and abrasion properties and has broad application in various ...veja mais DEUREX® E 08 takes the form of fine white granules in a non-polar polyethylene wax that functions as a lubricant for non-polar pigment concentrates. A dispersing agent, it also has good matting and abrasion properties and has broad application in various industries including uses in printing inks, paints and coatings and the modification of hotmelt adhesives and coating hotmelts. veja menos | |
| DEUREX® E 10 K | DEUREX AG | DEUREX® E 10 K are fine white granules in a soft and flexible polyethylene wax which can be emulsified. Beneficial properties include the product acting as a dispersing agent, a release agent and a lubricant that is ideal for use as a coating additive and...veja mais DEUREX® E 10 K are fine white granules in a soft and flexible polyethylene wax which can be emulsified. Beneficial properties include the product acting as a dispersing agent, a release agent and a lubricant that is ideal for use as a coating additive and filler in rubber and cables. veja menos | |
| DEUREX® E 11 G | DEUREX AG | DEUREX® E 11 G are white granules in the form of a non-polar polyethylene wax that functions as a release agent, lubricant and dispersing agent. It can be used in the modification of adhesives and coating hotmelts and as rubber and cable fillers. | |
| DEUREX® E 11 K | DEUREX AG | DEUREX® E 11 K are fine white granules in a non-polar polyethylene wax with properties that see it serve as a release agent, lubricant and dispersing agent. It can be used in rubber and cable fillers and in the modification of adhesives and coating hotmel...veja mais DEUREX® E 11 K are fine white granules in a non-polar polyethylene wax with properties that see it serve as a release agent, lubricant and dispersing agent. It can be used in rubber and cable fillers and in the modification of adhesives and coating hotmelts. veja menos | |
| DEUREX® E 12 | DEUREX AG | DEUREX® E 12 is in the form of fine white granules that make up a non-polar, low-molecular polyethylene wax. A low drop point ensures the wax is suitable for fine-particle precipitation. A dispersion agent, it also has good matting and abrasion properties...veja mais DEUREX® E 12 is in the form of fine white granules that make up a non-polar, low-molecular polyethylene wax. A low drop point ensures the wax is suitable for fine-particle precipitation. A dispersion agent, it also has good matting and abrasion properties and can be applied as a carrier for pigment concentrates. It is useful in the modification of hotmelt adhesives and coating hotmelts and has uses in printing inks and paints and coatings industries. veja menos | |
| DEUREX® E 13 | DEUREX AG | DEUREX® E 13 is composed of fine white granules in a hard, stable, high-molecular polyethylene wax which has the benefit of being a dispersing agent with good matting and abrasion-resistance properties. It can be used in the modification of hotmelt adhes...veja mais DEUREX® E 13 is composed of fine white granules in a hard, stable, high-molecular polyethylene wax which has the benefit of being a dispersing agent with good matting and abrasion-resistance properties. It can be used in the modification of hotmelt adhesives, coating hotmelts and has applications in printing inks and paints and coatings industries. veja menos | |
| DEUREX® E 18 K | DEUREX AG | DEUREX® E 18 K is a non-polar polyethylene wax that comes in the form of fine white granules. A dispersing agent, the product has other benefits in terms of having good abrasion resistance and is useful as a matting and slip agent. It is used in the modif...veja mais DEUREX® E 18 K is a non-polar polyethylene wax that comes in the form of fine white granules. A dispersing agent, the product has other benefits in terms of having good abrasion resistance and is useful as a matting and slip agent. It is used in the modification of hotmelt adhesives and coating hotmelts as well as in the printing inks and paints and coatings industries. veja menos | |
| DEUREX® E 25 | DEUREX AG | DEUREX® E 25 comes in the form of white flakes that make up a high-viscous, non-polar polyethylene wax. The benefits of this wax is its high viscosity and average hardness. The viscosity allows for reduced levels of wax addition. It is also useful as a di...veja mais DEUREX® E 25 comes in the form of white flakes that make up a high-viscous, non-polar polyethylene wax. The benefits of this wax is its high viscosity and average hardness. The viscosity allows for reduced levels of wax addition. It is also useful as a dispersing and release agent and has the added benefit of being a lubricant. The product has uses as a filler in rubber and cable and applications in the paints and coating industries. veja menos | |
| DEUREX® H 91 K | DEUREX AG | DEUREX® H 91 K is made of fine white granules in a hybrid wax composed of Fischer Tropsch and polyethylene waxes. It displays average hardness, consists of properties with both Fischer Tropsch and polyethylene waxes and can substitute pure FT waxes. It ca...veja mais DEUREX® H 91 K is made of fine white granules in a hybrid wax composed of Fischer Tropsch and polyethylene waxes. It displays average hardness, consists of properties with both Fischer Tropsch and polyethylene waxes and can substitute pure FT waxes. It can be used in hot melt adhesives and coating hotmelts and in paints and coatings. veja menos | |
| GLOXIL iM16k A | Hoffmann Mineral | GLOXIL iM16k A is based on hollow glass microspheres from 3M, this product brings further improvements in plastics where weight reduction is an important issue thanks to its surface modification. | |
| GLOXIL iM16k MAM | Hoffmann Mineral | GLOXIL iM16k MAM is a micro hollow glass sphere whose surface has been modified with a special methacrylic functional group. The process parameters are selected in such a way that, on one hand, anchoring to the surface takes place and, on the other hand, ...veja mais GLOXIL iM16k MAM is a micro hollow glass sphere whose surface has been modified with a special methacrylic functional group. The process parameters are selected in such a way that, on one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable by-products, such as occur during in-situ mixing, are therefore practically completely prevented. veja menos | |
| GLOXIL SF 91 A | Hoffmann Mineral | GLOXIL SF 91 A is a hybrid filler made of fiber and Neuburg Siliceous Earth with subsequent modification produces very good properties in plastics where a good mix of rigidity and flexibility is required. | |
| GLOXIL WW SL | Hoffmann Mineral | GLOXIL WW SL is an aqueous dispersion based on modified silica for use in matt water-based coatings improves incorporation, transparency and resistance. | |
| SILFITZ 91 | Hoffmann Mineral | SILFIT Z 91 is a natural combination of corpuscular silica and lamellar kaolinite, which has been subjected to a heat treatment. The components and the thermal process lead to a product that offers special performance benefits as a functional filler. | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com outros extensores ou agentes de alisamento. | |
| SILLIKOLLOID P 87 PURISS | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com outros extensores ou agentes de alisamento. | |
| SILLITIN N 85 | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| SILLITIN N 85 PURISS | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| SILLITIN N 87 | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| SILLITIN V 85 | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| SILLITIN V 88 | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizada como um enchimento (filler) funcional, sózinha ou combinada com extensores ou agentes de alisamento. | |
| SILLITIN Z 86 | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral | Um aglomerado natural do quartzo corpuscular e de caulinita lamelar com resíduo de peneiramento muito baixo. Utilizado como um enchimento (filler) funcional, sózinho ou combinado com extensores ou agentes de alisamento. | |
| SILLITIN Z 89 | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizada como um enchimento (filler) funcional sózinha ou combinada com extensores ou agentes de alisamento. | |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | Uma combinação natural de sílica corpuscular, cripto-cristalina e amorfa e de caulinita lamelar. Utilizada como um enchimento (filler) funcional sózinho ou combinada com extensores ou agentes de alisamento. | |
| Struktosil 45 AM | Hoffmann Mineral | Struktosil 45 AM is a modified fine talc grade for use in elastomers and coatings. It improves in particular the barrier effect. | |
| STRUKTOSIL 45 MAM | Hoffmann Mineral | STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, rel...veja mais STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable byproducts, such as occur during in situ mixings (i.e. during the direct addition of the additives), are therefore practically completely prevented and the material improves its hydrophobic properties. veja menos | |
| 1K STP-U Adhesive (Formulation #BBB 7006 [01/16]) | Hoffmann Mineral | This adhesive features SILLITIN Z 86. | |
| 1K STP-U Adhesive (Formulation #BBB 7372 [01/16]) | Hoffmann Mineral | This adhesive features SILLITIN Z 86. | |
| 1K STP-U Adhesive, High Strength (Formulation #V44426.1) | Hoffmann Mineral | This high strength adhesive features SILFIT Z 91, AKTIFIT PF 115, or AKTIFIT PF 111. | |
| 2K Epoxy Industrial Flooring (Formulation #RRS 2172) | Hoffmann Mineral | This self-leveling, water-borne industrial flooring features SILLITIN Z 89. | |
| 2K Polysulfide Coating (Formulation #V 44417.0 [1]) | Hoffmann Mineral | This coating formulation features SILLITIN V 85. | |
| 2K-Epoxy Industrial Flooring (Formulation #V 44422.2 [13]) | Hoffmann Mineral | This epoxy industrial flooring is self-leveling, with good pigment stability. It features SILLITIN Z 86. | |
| 2K-Polyaspartic Floor Coat (Formulation #WKHB 512/1) | Hoffmann Mineral | This tough floor coating is self-leveling and solvent-free. It features SILLITIN Z 86. | |
| 2K-Polyaspartic Floor Coat (Formulation #WKHB 512/2) | Hoffmann Mineral | This flooring flex coat is self-leveling and solvent-free. It features SILLITIN Z 86. | |
| 2K-PU Coating, Elastic (Formulation #V 44414.0 [1]) | Hoffmann Mineral | This 2K-PU Coating features SILLITIN Z 86. | |
| 2K-PU Coating with Polybutadiene Polyol Elastic, with High Resilience (Formulation #2119) | Hoffmann Mineral | This high resilience 2K-PU coating with polybutadiene polyol elastic features SILLITIN Z 86. | |
| 2K-PU Coating with Polybutadiene Polyol Elastic, with High Resilience (Formulation #2151) | Hoffmann Mineral | This high resilience 2K-PU coating with polybutadiene polyol elastic features SILLITIN Z 86. | |
| 2K-PU Coating with Polybutadiene Polyol Elastic, with High Resilience (Formulation #2161) | Hoffmann Mineral | This high resilience 2K-PU coating with polybutadiene polyol elastic features SILLITIN Z 86. | |
| 2K-PU Flooring (Formulation #V 44409.0) | Hoffmann Mineral | This 2K-PU Flooring is flexible, self-leveling, and solvent-free. It features SILLITIN Z 86. | |
| 2K-PU Joint Sealant for Floor Joints, Pourable (Formulation #V 44403.0 [1]) | Hoffmann Mineral | This joint sealer for floors features SILLITIN Z 86. | |
| 2K-PU Joint Sealant for Floor Joints, Pourable (Formulation #V 44403.0 [2]) | Hoffmann Mineral | This joint sealer for floors features SILLITIN Z 86. | |
| 2K-PU Joint Sealant, Pourable Good Chemical Resistance (Formulation #RRS 2067) | Hoffmann Mineral | This joint sealant features SILLITIN Z 86. | |
| 2K-PU Joint Sealant with Polybutadiene Polyol (Formulation #V 44416.0) | Hoffmann Mineral | This joint sealant features SILLITIN Z 86. | |
| 2K-PU Membrane and Joint Sealant Compound (Formulation #V 24403.0 [1]) | Hoffmann Mineral | This membrane and joint sealant compound features SILLITIN Z 86. | |
| 2K-PU-Beschichtung mit Polybutadienpolyol, gießfähig (Formulation #V 44415.0 [1]) | Hoffmann Mineral | This pourable coating features SILLITIN Z 86. | |
| Adhesive based on MS Polymer™, High Strength | Hoffmann Mineral | This adhesive can feature SILFIT Z 91, AKTIFIT VM, AKTIFIT AM, or AKTIFIT PF 115. | |
| Adhesive Based on Silane-Terminated Polyether, High Strength (Formulation #V44303.2A) | Hoffmann Mineral | This adhesive based on silane-terminated polyether features SILLITIN V 85, SILFIT Z 91, or AKTIFIT VM. | |
| Adhesive Based on Silane-Terminated Polyether, High Strength (Formulation #V44303.2C) | Hoffmann Mineral | This adhesive is based on silane-terminated polyether and provides maximum strength. It features SILLITIN V 85, SILFIT Z 91 or AKTIFIT VM. | |
| Economic Parquet Adhesive (Formulation #V44303.2B) | Hoffmann Mineral | This economic parquet adhesive meets the requirements of DIN EN 14293 for “soft” adhesives. It features SILLITIN V 85, SILLITIN Z 86 or PURISS SILFIT Z 91. | |
| Elastic Adhesive Based on MS Polymer™ (Formulation #V 44423.1B) | Hoffmann Mineral | This elastic adhesive features SILLITIN Z 86. | |
| Epoxy Hot Melt Adhesive (Formulation #RRS 2110) | Hoffmann Mineral | This epoxy hot melt adhesive features SILLITIN V 85. | |
| Klebstoff auf Basis MS Polymer™, hohe Festigkeit (Formulation #V 44428.1) | Hoffmann Mineral | This high strength adhesive features AKTIFIT VM, AKTIFIT AM and AKTIFIT PF 115. | |
| Mounting Adhesive, Polyester-acrylic Based (Formulation #RRS 2203) | Hoffmann Mineral | This mounting adhesive features AKTISIL VM 56. | |
| Non-Sagging Parquet Adhesive Based on MS Polymer™ (Formulation #V 44424.2) | Hoffmann Mineral | This parquet adhesive is non-sagging and features SILLITIN Z 86 or SILLITIN V 85. | |
| Polychloroprene Adhesive (Formulation #RRS 2202) | Hoffmann Mineral | This polychloroprene adhesive SILLITIN Z 86 PURISS or AKTISIL PF 777. | |
| Sealant based on MS Polymer™ (Formulation #V 44423.1A) | Hoffmann Mineral | This sealant features SILLITIN Z 86. |
