| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...veja mais UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. veja menos | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...veja mais UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. veja menos | |
| UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for...veja mais UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. veja menos | |
| SHIKOH™ UV-NS001 | Nippon Gohsei | SHIKOH™ UV-NS001 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring medium adhesion and good initial adhesion. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. | |
| SHIKOH™ UV-3630ID80 | Nippon Gohsei | SHIKOH™ UV-3630ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and...veja mais SHIKOH™ UV-3630ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. veja menos | |
| SHIKOH™ UV-3610ID80 | Nippon Gohsei | SHIKOH™ UV-3610ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion and low viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as ...veja mais SHIKOH™ UV-3610ID80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in isodecyl acrylate. Featuring medium adhesion and low viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. veja menos | |
| SHIKOH™ UV-3640PE80 | Nippon Gohsei | SHIKOH™ UV-3640PE80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in phenoxy ethyl acrylate. Featuring medium adhesion and high viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as we...veja mais SHIKOH™ UV-3640PE80 is an adhesive-type, UV-curable urethane acrylate oligomer resin, diluted in phenoxy ethyl acrylate. Featuring medium adhesion and high viscosity, this product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. veja menos | |
| SHIKOH™ UV-NS054 | Nippon Gohsei | SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives,...veja mais SHIKOH™ UV-NS054 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring high adhesion, thick coating potential, low viscosity, and good heat resistance. This product is well suited for use in optical, plastic, and electronic adhesives, as well as adhesive films and labels. veja menos | |
| SHIKOH™ UV-NS034 | Nippon Gohsei | SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesi...veja mais SHIKOH™ UV-NS034 is an adhesive-type, UV-curable urethane acrylate oligomer resin featuring low adhesion, temporary surface protection, and reduced dependency on peeling speed. This product is well suited for use in optical, plastic, and electronic adhesives, masking tapes, and adhesive films and labels. veja menos | |
| UV Cure 60-7105 | Epoxies, Etc. | UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. Thi...veja mais UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for products requiring deep section curing. veja menos | |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...veja mais nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. veja menos | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...veja mais UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. veja menos | |
| UV Cure 60-7108 | Epoxies, Etc. | UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...veja mais UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. veja menos | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...veja mais UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. veja menos | |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...veja mais UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. veja menos | |
| UV Cure 60-7155 | Epoxies, Etc. | UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...veja mais UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. veja menos | |
| SHIKOH™ UV-1700B | Nippon Gohsei | SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tape...veja mais SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-3700B | Nippon Gohsei | SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings a...veja mais SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings and primers for plastics and electronics, and adhesive films and labels. veja menos | |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...veja mais SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. veja menos | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...veja mais SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. veja menos | |
| SHIKOH™ UV-3310B | Nippon Gohsei | SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and pri...veja mais SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. veja menos | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...veja mais SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. veja menos | |
| SHIKOH™ UV-6300B | Nippon Gohsei | SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and ...veja mais SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-7600B | Nippon Gohsei | SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and l...veja mais SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-7650B | Nippon Gohsei | SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...veja mais SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...veja mais SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. veja menos | |
| SHIKOH™ UV-7630B | Nippon Gohsei | SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...veja mais SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-2000B | Nippon Gohsei | SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optic...veja mais SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-3520EA | Nippon Gohsei | SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, ad...veja mais SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, adhesive films and labels, and plastic and electronic coatings. veja menos | |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking...veja mais SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-6640B | Nippon Gohsei | SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optica...veja mais SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optical discs, plastics, and electronics, as well as adhesive films and labels. veja menos | |
| SHIKOH™ UV-3210EA | Nippon Gohsei | SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optica...veja mais SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. veja menos | |
| SHIKOH™ UV-7461TE | Nippon Gohsei | SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plasti...veja mais SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. veja menos | |
| SHIKOH™ UV-7640B | Nippon Gohsei | SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, ele...veja mais SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, electronics, and woodworking applications, and adhesive films and labels. veja menos | |
| SHIKOH™ UV-2750B | Nippon Gohsei | SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes...veja mais SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes, screen printing inks, adhesive films and labels, and woodworking applications. veja menos | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...veja mais SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...veja mais SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. veja menos | |
| SHIKOH™ UV-7620EA | Nippon Gohsei | SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs...veja mais SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs, plastics, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. veja menos | |
| SHIKOH™ UV-7000B | Nippon Gohsei | SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and scree...veja mais SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. veja menos | |
| BR-3042 | Bomar, formerly Dymax Oligomers & Coatings | BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-cura...veja mais BR-3042 is an aromatic polyether urethane diacrylate designed for UV adhesive applications. Cured films of BR-3042 and monofunctional monomers result in soft, highly elastic, tacky systems ideal for use in UV pressure-sensitive adhesives (PSA), or UV-curable laminating adhesives. BR-3042 enhances adhesion and improves solvent resistance. veja menos | |
| Uvacril R1 | Ichemco | Uvacril R1 is a UV-curable, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of 99-100%. Uvacril R1 is most commonly used in label production applications. | |
| Uvacril R2 | Ichemco | Uvacril R2 is a UV-curable, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99%. Uvacril R2 is most commonly used in removable and deep freeze label production applications. | |
| TGIC-G | Changzhou Niutang Chemical Plant | TGIC-G is a white granule with low UV absorption. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. | |
| TGIC-D | Changzhou Niutang Chemical Plant | TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB s...veja mais TGIC-D is a white powder with low UV absorption, high heat and low chlorine level. It is used for its adhesive, stabilizing and curing agent properties. It is most commonly used in polyester powder coatings, plastic and rubber adhesive additives and PCB solder resistant ink. veja menos | |
| Uvacril M 25 | Ichemco | Uvacril M 25 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 150°C of 20-30 mPa.s. Uvacril M 25 is most commonly used in label, tape, and graphi...veja mais Uvacril M 25 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 150°C of 20-30 mPa.s. Uvacril M 25 is most commonly used in label, tape, and graphic production applications. veja menos | |
| Uvacril M 26 | Ichemco | Uvacril M 26 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 130°C of 35-70 mPa.s. Uvacril M 26 is most commonly used in label, tape, and graphic ...veja mais Uvacril M 26 is a UV-curing, solvent-free, acrylate copolymer pressure sensitive adhesive. This product has a total solids content of greater than 99% and a viscosity at 130°C of 35-70 mPa.s. Uvacril M 26 is most commonly used in label, tape, and graphic production applications. veja menos | |
| GENOMER* 6043/M22 | Rahn AG | GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesiv...veja mais GENOMER* 6043/M22 is a modified saturated polyester resin. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and pressure sensitive adhesives. It shows excellent adhesive properties. This product t is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. veja menos | Request Sample |
| GENOMER* 3143 | Rahn AG | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| GENOCURE* MBF | Rahn AG | GENOCURE* MBF is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* MBF is especially recommended when UV coatings are required to exhibit minimal yellowing. | Request Sample |
| GENORAD* 23 | Rahn AG | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV c...veja mais GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. veja menos | Request Sample |
| GENOMER* 4256 | Rahn AG | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...veja mais GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. veja menos | Request Sample |
| GENOCURE* CPK | Rahn AG | GENOCURE* CPK is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* CPK is especially recommended when UV-coatings are required to exhibit only minimal yellowing even after prolonged exposure to sunlight. | Request Sample |
| GENOMER* 4297 | Rahn AG | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...veja mais GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. veja menos | Request Sample |
| GENOCURE* CQ | Rahn AG | GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental compos...veja mais GENOCURE* CQ is a camphorquinone with high purity and absorption maximum at approx. 470 nm. It is a photoinitiator for UV-curable inks, coatings and adhesives. The product allows curing with a visible light source. It is typically applied to dental composites, visible light curing adhesives and pigmented systems. veja menos | Request Sample |
| BR-941 | Bomar, formerly Dymax Oligomers & Coatings | BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its exc...veja mais BR-941, a hexafunctional aliphatic urethane acrylate, is used in applications that require a hard, chemically resistant, non-yellowing coating or adhesive with a very fast cure response. BR-941’s high functionality and low molecular weight deliver its excellent properties to systems with a final viscosity much lower than is typical of urethane acrylates. BR-941 is compatible with a broad range of monomers and oligomers. veja menos | |
| EPOXY METHACRYLATE 97-053 | Rahn AG | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...veja mais EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. veja menos | Request Sample |
| GENOCURE* BMS | Rahn AG | GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented ...veja mais GENOCURE* BMS is 4-Tolylthiobenzophenone. Norrish Type II Photoinitiator for UV-curable inks, coatings and adhesives. It has high reactivity, low odor, and is insoluble in water. Recommended for use with GENOCURE* ITX and e.g. GENOCURE* ABD for pigmented systems. veja menos | Request Sample |
| GENOCURE* DEAP | Rahn AG | GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coa...veja mais GENOCURE* DEAP is an aromatic ketone used as a photoinitiator for UV-curable inks, coatings, and adhesives. It is non-yellowing, has good stability, and through cure. This product is recommended for a variety of applications, including water dilutable coatings, laminating adhesives, printing inks and varnishes for plastic foils, and wood, plastic, and paper coatings. veja menos | Request Sample |
| PChem® BM82 | Pioneer Chemicals Co., Ltd. | PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive...veja mais PChem® BM82, in the form of a pellet, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers high flexibility, adhesion, low shrinkage rate, and durability. It is compatible with numerous nitrocellulose and solvents, can be used as a base resin for UV curing of BOPP and OPP systems, and is generally used in applications of aluminum sealer, paper printing, leather finish, metal coating, and stamping ink (adhesive layer). PChem® BM82 has a molecular weight of 90,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.37. veja menos | |
| GENOMER* 1125 | Rahn AG | GENOMER* 1125 is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings, and adhesives. This product is a monofunctional acrylate that imparts good adhesion, hardness and toughness to UV/EB-cured formulations. | Request Sample |
| GENOCURE* EHA | Rahn AG | GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This pr...veja mais GENOCURE* EHA is an aminobenzoate that is used as a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product can be applied in offset inks and varnishes letterpress inks, screen inks and varnishes, flexo inks and varnishes and industrial coatings and adhesives. veja menos | Request Sample |
| GENOCURE* EPD | Rahn AG | GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is ...veja mais GENOCURE* EPD is an aminobenzoate. It is a synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxantones and other photoinitiators. This product is typically used in offset inks, letterpress inks, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives and photo polymers and printing plates. veja menos | Request Sample |
| GENOCURE* PBZ | Rahn AG | GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing...veja mais GENOCURE* PBZ is a 4-Phenylbenzophenone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. GENOCURE* PBZ shows a faster cure speed than Benzophenone as well as longer wavelength UV absorption. It is typically applied in printing inks, wood coatings, printed circuit board and photo polymers and printing plates. veja menos | Request Sample |
| GENOCURE* MDEA | Rahn AG | GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress...veja mais GENOCURE* MDEA is an aliphatic amine synergist for UV-curable inks, coatings and adhesives. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone and thioxantones. This product is typically used in letterpress inks, screen inks and varnishes, paper and board varnishes and wood coatings. veja menos | Request Sample |
| GENOMER* 3486 | Rahn AG | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and...veja mais GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. veja menos | Request Sample |
| GENOCURE* DETX | Rahn AG | GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress ink...veja mais GENOCURE* DETX is a thioxanthone that is used as a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 384nm, GENOCURE* DETX is highly effective in pigmented systems. It is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. veja menos | Request Sample |
| GENOCURE* EMK | Rahn AG | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...veja mais GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. veja menos | Request Sample |
| ADDAPT® PolySurF™ HP | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing in...veja mais ADDAPT® PolySurF™ HP is a proprietary mixture of methacrylated mono-phosphate and bi-phosphate esters. It is used as a solvent-free UV-curable additive, adhesion promoter, and flame retardant. This product has applications in paints, lacquers, printing inks, and adhesives. veja menos | |
| GENOCURE* LTM | Rahn AG | GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yel...veja mais GENOCURE* LTM is a liquid photoinitiator blend for UV-curable inks, coatings and adhesives. It has good absorption between 350 and 400 nm; therefore it provides good through cure in highly pigmented white systems. This product is typically used in non yellowing wood coatings, non yellowing coatings for plastics, non yellowing screen and decor varnishes, laminating adhesives and pressure sensitive adhesives. veja menos | Request Sample |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...veja mais Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. veja menos | |
| GENOCURE* MBB | Rahn AG | GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnis...veja mais GENOCURE* MBB is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in paper varnishes, plastic varnishes, wood coatings, printing inks, industrial coatings and board varnishes. veja menos | Request Sample |
| ADDAPT® PolySurF™ HPH | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal an...veja mais ADDAPT® PolySurF™ HPH is a proprietary mixture of methacrylated mono-phosphate and di-phosphate esters. It is used as a solvent-free UV-curable additive in paints, lacquers, printing inks, and adhesives. This product also improves the adhesion to metal and has flame retardant properties. veja menos | |
| GENOCURE* DMHA | Rahn AG | GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, pl...veja mais GENOCURE* DMHA is an aromatic Ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. This photoinitiator is ideally suited for surface cure even without amine synergists. GENOCURE* DMHA is particularly suitable for paper varnishes, plastic coatings, water dilutable coatings, clear coatings and pigmented coatings . veja menos | Request Sample |
| Novester 8511-73ST | Novaresine S.r.l | Novester 8511-73ST is an elastic unsaturated polyester resin designed primarily for use in wood primers and putties. This product is also recommended for UV-curable and powder coating applications. | |
| GENOCURE* LBP | Rahn AG | GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and boa...veja mais GENOCURE* LBP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.) This product is typically used in paper and board varnishes, wood and industrial coatings, printing inks and varnishes and plastic varnishes. veja menos | Request Sample |
| GENOCURE* ITX | Rahn AG | GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks...veja mais GENOCURE* ITX is a thioxanthone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Due to the absorption at 380nm, GENOCURE* ITX is highly effective in pigmented systems. This product is typically applied in offset inks, letterpress inks, screen inks, flexo inks and wood applications. veja menos | Request Sample |
| ADDAPT® PolySurF™ HPL | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This p...veja mais ADDAPT® PolySurF™ HPL is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent-free UV-curable additive, adds leveling and wetting properties, acts as a flame retardant, and improves adhesion to metal. This product is used in paints, lacquers, printing inks, and adhesives. veja menos | |
| GENOMER* 5142 | Rahn AG | GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in th...veja mais GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. veja menos | Request Sample |
| GENOCURE* LBC | Rahn AG | GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied i...veja mais GENOCURE* LBC is a liquid photoinitiator blend. it is a photoinitiator for UV curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically applied in paper varnishes, metal varnishes, plastic coatings and water dilutable coatings. veja menos | Request Sample |
| ADDAPT® PolySurF™ HPm | ADDAPT Chemicals BV | ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.Thi...veja mais ADDAPT® PolySurF™ HPm is a proprietary mixture of methacrylated monophosphate and diphosphate esters. It is used as a solvent free UV-curable additive and acts as an effective flame retardant while also promoting adhesion to metal, glass, and concrete.This product is used in paints, lacquers, printing inks, and adhesives. veja menos | |
| GENOPOL* AB-2 | Rahn AG | GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improve...veja mais GENOPOL* AP-2 is a multifunctional aminobenzoate derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for standard aminobenzoates. The hydrogen donor improves the reactivity of UV-systems initiated with derivatives of benzophenone, thioxanthone and other photoinitiators. This product is recommended for use in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. veja menos | Request Sample |
| GENOMER* 5161 | Rahn AG | GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...veja mais GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. veja menos | Request Sample |
| SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...veja mais SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. veja menos | |
| SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...veja mais SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. veja menos | |
| BR-3741AJ | Bomar, formerly Dymax Oligomers & Coatings | BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adh...veja mais BR-3741AJ is an aliphatic 1.3 acrylate functional polyether urethane. The extremely elongating nature of BR-3741AJ makes it an excellent candidate for consideration in UV light-curable PSAs as a reactive tackifier. It is also used as a co-oligomer for adhesion promotion in coatings. Films formulated with BR-3741AJ are highly flexible, elastomeric, and tacky. This oligomer is an excellent adhesion promoter, and compared to other reactive tackifiers it results in relatively tougher films. It is a perfect choice for optically clear UV pressure-sensitive adhesives (PSAs). veja menos | |
| GENOCURE* TPO | Rahn AG | GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo in...veja mais GENOCURE* TPO is a phosphine oxid, photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 380 nm GENOCURE* TPO is highly effective for high film thickness. It is typically applied in offset inks and varnishes, flexo inks and varnishes, screen inks and varnishes, overprint varnishes and letterpress inks. veja menos | Request Sample |
| GENOCURE* BDK | Rahn AG | GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset in...veja mais GENOCURE* BDK is a benzildimethylketal. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). This product is typically used in offset inks and varnishes, printed circuit boards, glassfiber coating, wood and industrial coating and photo polymers and printing plates. veja menos | Request Sample |
| Voxtar™ M100 | Perstorp | Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...veja mais Voxtar™ M100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 263 °C. Voxtar™ M100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. veja menos | |
| Voxtar™ M50 | Perstorp | Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...veja mais Voxtar™ M50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 260 °C. Voxtar™ M50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. veja menos | |
| Voxtar™ T100 | Perstorp | Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...veja mais Voxtar™ T100 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T100 is based on 100% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. veja menos | |
| Voxtar™ T50 | Perstorp | Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesive...veja mais Voxtar™ T50 is a functional polyol with four primary hydroxyl groups that provides improved drying abilities, durability, water and thermal resistance. This product has a crystalline appearance and a melting point of 248 °C. Voxtar™ T50 is based on 40% renewable content and is used in UV-curable resins and monomers, synthetic lubricants, liquid alkyd and polyester resins, adhesives, sealants, and paints. veja menos | |
| GENOCURE* BP | Rahn AG | GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent fo...veja mais GENOCURE* BP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. Optimum results are obtained in combination with an amine synergist (GENOCURE* MDEA, oligoamines etc.). Melted benzophenone can be used as a solvent for photoinitiator cocktails. This product is typically applied in plastic varnishes, printing inks and varnishes and wood and industrial coatings. veja menos | Request Sample |
| GENOCURE* BAPO | Rahn AG | GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due...veja mais GENOCURE* BAPO is typically used in concentrations from 0.1 to 1.5%. In white pigmented inks and coatings, it is often used in combination with GENOCURE CPK. This product is a phosphine oxide photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 370nm GENOCURE* BAPO shows excellent through cure in pigmented systems. veja menos | Request Sample |
| GENOCURE* PMP | Rahn AG | GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENO...veja mais GENOCURE* PMP is an aromatic ketone. It is a photoinitiator for UV-curable inks, coatings and adhesives. It is typically used in concentrations from 0.5 to 4% in association with benzophenones, thioxantones and amine synergists like GENOCURE* EPD and GENOCURE* EHA or GENOMER* 5275 (up to 15%). This product is applied in offset inks and varnishes, glass fiber coating, screen inks and varnishes, flexo inks and varnishes, industrial coatings and adhesives, wood coatings and printed circuit boards. veja menos | Request Sample |
| GENOMER* 4383/W | Rahn AG | GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, ...veja mais GENOMER* 4383/W is an aliphatic, physically drying polyurethane dispersion. This resin is recommended for radically curable inks, coatings, and adhesives. It is sandable after physical drying, low-odor, and has good abrasion resistance, adhesion on wood, and good solvent resistance. This product may be cross-linked by used of UV-irradiation with a suitable initiator. GENOMER* 4383/W is recommended for wood and industrial coatings. veja menos | Request Sample |
| GENOCURE* BDMM | Rahn AG | GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is...veja mais GENOCURE* BDMM is an aromatic ketone. It is a Norrish Type I photoinitiator for UV-curable inks, coatings and adhesives. Due to the strong absorption at 325 nm, GENOCURE* BDMM shows excellent through cure in dark color pigmented systems. GENOCURE* BDMM is typically used in concentrations from 0.5 to 4%. In printing inks it is often used in combination with thioxantones, aminobenzoates, benzophenones, GENOCURE* PMP, CPK and BDK. veja menos | Request Sample |
| GENOPOL* BP-2 | Rahn AG | GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the product...veja mais GENOPOL* BP-2 is a multifunctional benzophenone derivative designed for use in UV-curable inks, coatings and adhesives, where low migration and low odor are required. It can be used as a replacement for benzophenone and its derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* BP-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* BP-2 will exhibit extremely low tendency to migrate. This product can be used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. veja menos | Request Sample |
| GENOPOL* TX-2 | Rahn AG | GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production ...veja mais GENOPOL* TX-2 is a multifunctional thioxanthone derivative for use in UV-curable inks, coatings and adhesives where low migration and low odor are required. It can be used as a replacement for ITX and other thioxanthone derivatives. During the production process of the polymeric GENOPOL* product range, the low molecular weight substances are removed. Therefore, GENOPOL* TX-2 is very low in odor. Combined with the ability to link into the UV cured acrylate matrix, GENOPOL* TX-2 will exhibit extreme low tendency to migrate. This product is used in the following applications: offset inks and varnishes; flexo inks and varnishes; letterpress inks and varnishes; letterpress inks and varnishes; and screen inks and varnishes. GENOPOL*.TX-2 should always be used in combination with GENOPOL*.AB-2. veja menos | Request Sample |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...veja mais Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. veja menos | |
| Epokukdo KDU-653 | Kukdo Chemical Co., Ltd. | Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is ge...veja mais Epokukdo KDU-653 is a UV curable acrylate epoxy oligomer of bisphenol-A type. UV/EB cured products based on KDU-653 give good adhesion, excellent hardness, chemical resistance, good flexibility, improved water resistance and good cure-speed. KDU-653 is generally used for UV curing top coating for wood, clear coating for paper. Curing-speed and viscosity of KDU-653 depend on diluents, photo initiators, and additives. veja menos |
