| 107 Red Chrome Molybdenum | Hangzhou Tiankai (China) Enterprise Co., Ltd. | 107 Red Chrome Molybdenum is an inorganic chromium red pigment. This product appears as a red powder and has an oil absorption of 22 g/100g, and it functions as a colorant in paints and inks. | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...veja mais 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. veja menos | |
| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 207 Red Chrome Molybdenum | Hangzhou Tiankai (China) Enterprise Co., Ltd. | 207 Red Chrome Molybdenum is an inorganic chromium red pigment. This product appears as a red powder and has an oil absorption of 22 g/100g, and it functions as a colorant in paints and inks. | |
| 307 Red Chrome Molybdenum | Hangzhou Tiankai (China) Enterprise Co., Ltd. | 307 Red Chrome Molybdenum is an inorganic chromium red pigment. This product appears as a red powder and has an oil absorption of 30 g/100g, and it functions as a colorant in paints and inks. | |
| 4-PHENYL-BENZOPHENON | DKSH | 4-PHENYL-BENZOPHENON is an aromatic ketone compound, which is a type Ⅱ photoinitiator. It can be used as photoinitiator in UV curable coatings and inks. 4-PHENYL-BENZOPHENON can be used in UV curable coatings and inks. | Request Sample |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...veja mais 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. veja menos | |
| 4489-M-60 Long Oil Silicone Modified Alkyd Resin | Gabriel Performance Products | 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include ...veja mais 4489-M-60 is a silicone modified, long oil alkyd intended for use in durable exterior coatings. Air drying enamels made with this resin are weather resistant, retain their color and gloss, and have good flexibility. Examples of items to be coated include machinery, freight cars, metal drums, signs, railings, metal doors and siding and metal structures. 4489-M-60 may also be used to make TT-E-490E enamels. veja menos | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...veja mais 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. veja menos | |
| 4HBA | Kowa Europe GmbH | 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coat...veja mais 4HBA is a rheology modifier with high cross-linking ability and good adhesion. It provides scratch resistance with good weatherability. 4HBA can be co-polymerized with various vinyl monomers. It is suitable for paint and coating, automotive top clear coatings, water borne coatings, powder coatings, adhesives, urethane finishes, and UV inkjet ink. veja menos | Request Sample |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...veja mais 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. veja menos | |
| A 135 | BIP (Oldbury) Ltd | A 135 is a non ionic polyethylene emulsion, in a low viscosity liquid. It is used primarily to improve tear strength and can be used on any fabric. | |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...veja mais Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. veja menos | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...veja mais Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. veja menos | |
| Accofal 1G54 | Accoat A/S | Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...veja mais Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. veja menos | |
| Accofal 2G54 | Accoat A/S | Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...veja mais Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. veja menos | |
| Accofal 3G54 | Accoat A/S | Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...veja mais Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. veja menos | |
| Accoflon 1C | Accoat A/S | Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adh...veja mais Accoflon 1C is a tough, dark grey, heat-resistant fluoroplastic coating with a semi-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in mixers, dough vats, on conveyer belts and freeze-drying trays. veja menos | |
| Accoflon 2C | Accoat A/S | Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesi...veja mais Accoflon 2C is a durable, dark grey fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. veja menos | |
| Accoflon H | Accoat A/S | Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the...veja mais Accoflon H is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. Its layer thickness can range from 35 to 60µm .The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and transport equipment and plastic moulding equipment due to its durability and non-stick properties. veja menos | |
| Accoflon P348 | Accoat A/S | Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...veja mais Accoflon P348 is a durable, black fluorocarbon coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry, particularly in transport equipment, foodstuff production and fast food equipment. veja menos | |
| Accolan Silver | Accoat A/S | Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...veja mais Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. veja menos | |
| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| ACRYL PC 950 | CTP Egypt S.A.E. CTP Original | ACRYL PC 950 is a low viscosity cold hardening methyl methacrylate based resin that is used for the production of high strength polymer concretes. This product can be highly filled depending on maximum grain size of well graded dry mix. | |
| Acrylated Amine Oligomer SZ 225 | Soltech Ltd | Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehi...veja mais Acrylated Amine Oligomer SZ 225 is an acrylate functional oligomeric amine resin designed to provide low viscosity, pigment wetting, adhesion, and high gloss. Common applications of this product include plastic coatings, plastic adhesives, screen ink vehicles, clear paper coatings, wood coatings, and wood fillers. Acrylated Amine Oligomer SZ 225 is 100% polymer solid by weight with a viscosity of 500-1,100 at 25℃. veja menos | |
| AD-595 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AD-595, in the form of a whitish liquid,is a resin free silica based duller for use in leather base coats to reduce gloss, increase coverage, and improve processing properties like embossing, milling , staking. Add from 5-18% in base coats only this produ...veja mais AD-595, in the form of a whitish liquid,is a resin free silica based duller for use in leather base coats to reduce gloss, increase coverage, and improve processing properties like embossing, milling , staking. Add from 5-18% in base coats only this product is not recommend for leather topcoat usage. veja menos | |
| Additive ST 2 | Ichemco | Additive ST 2 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an additive in Color Ink PP PAMC and Color Ink PP PAM+Add applications to improve protection of the printed area in case of ink transfer. | |
| Additive ST 2X | Ichemco | Additive ST 2X is a polycondensed urethane solution in xylene. This product has a total solids content of 11.5-12.5%. Additive ST 2X is most commonly used as an ink additive added before printing onto PP acrylic and solventborne PSA tapes. | |
| Additive ST2/14 | Ichemco | Additive ST2/14 is a polycondensed urethane solution in toluene/xylene. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| Additive ST2/14 ECO | Ichemco | Additive ST2/14 ECO is a polycondensed urethane solution in aliphatic solvents. This product is most commonly used as an ink additive to increase printability in PP acrylic and solvent-based pressure sensitive adhesive tape applications. | |
| AFCONA - 1101 | AFCONA Additives Sdn Bhd | AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. ...veja mais AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. AFCONA - 1101 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. veja menos | |
| AFCONA - 1102 | AFCONA Additives Sdn Bhd | AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as ...veja mais AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. veja menos | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...veja mais Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Akuabrid HM 1153 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 1153 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 2124 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 2124 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good hydrolysis resistance and mechanical properties and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 4001 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 4001 is a high modulus, solvent-free, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good water resistance and is ideal for use in plastic, metal, and wood coating applications. | |
| Akuabrid HM 6552A | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ide...veja mais Akuabrid HM 6552A is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. veja menos | |
| Akuabrid HM 6560 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...veja mais Akuabrid HM 6560 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. veja menos | |
| Akuabrid HM 6574 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is idea...veja mais Akuabrid HM 6574 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. It displays excellent hydrolysis and rub resistances, good solvent resistance and mechanical properties, and high surface hardness. This product is ideal for use in plastic, metal, and wood coating applications. veja menos | |
| Akuabrid HS 019 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 019 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid HS 070 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid HS 070 is a milky, semi-clear, liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product is ideal for use in non-toxic coatings for toys, household supplies, textiles, and plastics. | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...veja mais Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Akuarane DTP 1322 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1322 is a milky white, liquid, waterborne polyurethane dispersion that displays good adhesion and rubbery feel. This product is ideal for use in textile coatings and adhesives. | |
| Akuarane DTP 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives...veja mais Akuarane DTP 1330 is a milky white, liquid, waterborne polyurethane dispersion that displays high clearness and good emulsion and pH stability. It is an advanced version of Akuarane DTP 1322. This product is ideal for use in textile coatings and adhesives. veja menos | |
| ALBAQUA 8L | Alba Aluminiu | ALBAQUA 8L is a water-dilutable leafing standard aluminum paste with super finesse. It is recommended for paper coatings, spray cans and printing inks. | |
| Aldirez A | Incorez Ltd. | Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...veja mais Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. veja menos | Request Sample |
| Aliphatic C5 Hydrocarbon Resin E1102 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 2...veja mais Aliphatic C5 Hydrocarbon Resin E1102 is an amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1102 has an initial colour (YI) value of 28. It can also be used as a modifier in polymer & rubber compounding and film applications. veja menos | |
| Aliphatic C5 Hydrocarbon Resin E1202 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23...veja mais Aliphatic C5 Hydrocarbon Resin E1202 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1202 has an initial colour (YI) value of 23. It can also be used as a modifier in polymer & rubber compounding and film applications. veja menos | |
| Aliphatic C5 Hydrocarbon Resin E1204 LS | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value...veja mais Aliphatic C5 Hydrocarbon Resin E1204 LS is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1204 LS has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. veja menos | |
| Aliphatic C5 Hydrocarbon Resin E1304 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29...veja mais Aliphatic C5 Hydrocarbon Resin E1304 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1304 has an initial colour (YI) value of 29. It can also be used as a modifier in polymer & rubber compounding and film applications. veja menos | |
| Aliphatic C5 Hydrocarbon Resin E1310 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25...veja mais Aliphatic C5 Hydrocarbon Resin E1310 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1310 has an initial colour (YI) value of 25. It can also be used as a modifier in polymer & rubber compounding and film applications. veja menos | |
| Aliphatic C5 Hydrocarbon Resin E1401 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31...veja mais Aliphatic C5 Hydrocarbon Resin E1401 is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin E1401 has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. veja menos | |
| Aliphatic C5 Hydrocarbon Resin E2203 LC | Aquent Impex | Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer co...veja mais Aliphatic C5 Hydrocarbon Resin E2203 LC is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin E2203 LC has an initial colour (YI) value of 23. veja menos | |
| Aliphatic C5 Hydrocarbon Resin ECR 213 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...veja mais Aliphatic C5 Hydrocarbon Resin ECR 213 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 213 has an initial colour (YI) value of 87. veja menos | |
| Aliphatic C5 Hydrocarbon Resin ECR 288S | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value...veja mais Aliphatic C5 Hydrocarbon Resin ECR 288S is a amorphous, glassy, low-molecular-weight hydrocarbon polymer that promotes adhesion and tack in hot-melt and pressure-sensitive adhesives. Aliphatic C5 Hydrocarbon Resin ECR 288S has an initial colour (YI) value of 31. It can also be used as a modifier in polymer & rubber compounding and film applications. veja menos | |
| Aliphatic C5 Hydrocarbon Resin ECR 807 | Aquent Impex | Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer com...veja mais Aliphatic C5 Hydrocarbon Resin ECR 807 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aliphatic C5 Hydrocarbon Resin ECR 807 has an initial colour (YI) value of 32. veja menos | |
| Aliphatic Urethane Acrylate SU 500 | Soltech Ltd | Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings,...veja mais Aliphatic Urethane Acrylate SU 500 is a aliphatic urethane diacrylate containing isobornyl acrylate that is designed to provide adhesion, a light color, flexibility, and toughness. Common applications of this product include screen inks, plastic coatings, overprint varnishes, adhesives, and wood flooring. Aliphatic Urethane Acrylate SU 500 is 78% polymer solid by weight with a mPa.s viscosity of 1,200-2,000 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 5039 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include...veja mais Aliphatic Urethane Acrylate SU 5039 is a nona-functional aliphatic urethane acrylate oligomer that is designed to provide a fast curing response, abrasion resistance, stain resistance, hardness, and light color. Common applications of this product include plastic coatings, hard coatings, clear coatings, vinyl flooring, and inks, . Aliphatic Urethane Acrylate SU 5039 is 85% polymer solid by weight with a mPa.s viscosity of 5,000-9,000 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 512 | Soltech Ltd | Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings...veja mais Aliphatic Urethane Acrylate SU 512 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion and a light color. Common applications of this product include pigment coatings for wood, metal coatings, plastic coatings, and ink. Aliphatic Urethane Acrylate SU 512 is 85% polymer solid by weight with a mPa.s viscosity of 3,000-5,000 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 514 | Soltech Ltd | Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, p...veja mais Aliphatic Urethane Acrylate SU 514 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, toughness, adhesion, abrasion resistance, and scratch resistance. Common applications of this product include screen inks, plastic coatings, light stable coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 514 is 90% polymer solid by weight with a mPa.s viscosity of 7,000-10,000 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 519 | Soltech Ltd | Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic a...veja mais Aliphatic Urethane Acrylate SU 519 is an acrylated aliphatic urethane oligomer diluted with 30% of hydroxy propyl methacrylate that is designed to provide flexibility and heat resistance, Common applications of this product include marking inks, plastic adhesives, thick film casting, plastic coatings, clear coatings, and overprint varnishes. Aliphatic Urethane Acrylate SU 519 is 70% polymer solid by weight with an mPa.s viscosity of 12,000-18,000 at 25℃. veja menos | |
| Aliphatic Urethane Acrylate SU 520 | Soltech Ltd | Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as pla...veja mais Aliphatic Urethane Acrylate SU 520 is a deca-functional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion resistance, hardness, and a fast curing response. This product is commonly used in applications such as plastic coatings, inks, clear coatings, vinyl flooring, and hard film coatings. Aliphatic Urethane Acrylate SU 520 is 100% polymer solid by weight with an mPa.s viscosity of 2,500-3,500 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 530 | Soltech Ltd | Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment...veja mais Aliphatic Urethane Acrylate SU 530 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 530 is 100% polymer solid by weight with a mPs.s viscosity of 35,000-55,000 at 25℃. veja menos | |
| Aliphatic Urethane Acrylate SU 5347 | Soltech Ltd | Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, gl...veja mais Aliphatic Urethane Acrylate SU 5347 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, low viscosity, and light color. Common applications of this product include laminating adhesives, screen inks, glass pigment coatings, and lithographic inks. Aliphatic Urethane Acrylate SU 5347 is 100% polymer solid by weight with a mPs.s viscosity of 600-1,200 at 25℃. veja menos | |
| Aliphatic Urethane Acrylate SU 542 | Soltech Ltd | Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings,...veja mais Aliphatic Urethane Acrylate SU 542 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, durability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 542 is 100% polymer solid by weight with a mPs.s viscosity of 500-1,000 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 543 | Soltech Ltd | Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, ...veja mais Aliphatic Urethane Acrylate SU 543 is a difunctional aliphatic urethane acrylate oligomer that is designed to provide flexibility, adhesion, duability, and abrasion resistance. Common applications of this product include metal coatings, plastic coatings, screen ink, pigment coatings, and clear coatings for cork. Aliphatic Urethane Acrylate SU 543 is 100% polymer solid by weight with a mPs.s viscosity of 100-300 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 550 | Soltech Ltd | Aromatic Urethane Acrylate SU 550 is a trifunctional aliphatic urethane acrylate oligomer with 5% water that is designed to provide anti-fogging properties, flexibility, water resistance, and chemical resistance. Common applications of this product includ...veja mais Aromatic Urethane Acrylate SU 550 is a trifunctional aliphatic urethane acrylate oligomer with 5% water that is designed to provide anti-fogging properties, flexibility, water resistance, and chemical resistance. Common applications of this product include wood flooring, anti-fog coatings, and water based systems. Aromatic Urethane Acrylate SU 550 is 95% polymer solid by weight with a mPa.s viscosity of 4,500-7,500 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 564 | Soltech Ltd | Aliphatic Urethane Acrylate SU 564 is a a trifunctional aliphatic urethane acrylate oligomer designed to provide flexibility, light color, abrasion, and stain resistance. Common applications of this product include light stable coatings, overprint varnish...veja mais Aliphatic Urethane Acrylate SU 564 is a a trifunctional aliphatic urethane acrylate oligomer designed to provide flexibility, light color, abrasion, and stain resistance. Common applications of this product include light stable coatings, overprint varnishes, screen inks, plastic coatings, and wood flooring. Aliphatic Urethane Acrylate SU 564 is 85% polymer solid by weight with a mPa.s viscosity of 37,500-52,000 at 25℃. veja menos | |
| Aliphatic Urethane Acrylate SU 565 | Soltech Ltd | Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light ...veja mais Aliphatic Urethane Acrylate SU 565 is a trifunctional aliphatic urethane acrylate oligomer that is designed to provide stain resistance, abrasion, fast curing, and light color. This product is commonly used in applications such as plastic coatings, light stable coatings, overprint varnishes, wood flooring and screen inks. Aliphatic Urethane Acrylate SU 565 is 75% polymer solid by weight with an m.PA.s viscosity of 30,000-40,000 at 25℃. veja menos | |
| Aliphatic Urethane Acrylate SU 570 | Soltech Ltd | Aliphatic Urethane Acrylate SU 570 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, toughness, low viscosity, and a light color/odor. This product is commonly used in applications such as plastic coatings, screen in...veja mais Aliphatic Urethane Acrylate SU 570 is a di-functional aliphatic urethane acrylate oligomer designed to provide flexibility, toughness, low viscosity, and a light color/odor. This product is commonly used in applications such as plastic coatings, screen inks, light stable coatings, overprint varnishes, and wood flooring. Aliphatic Urethane Acrylate SU 570 is 100% polymer solid by weight with an mPa.s viscosity of 3,000-4,000 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 574 | Soltech Ltd | Aliphatic Urethane Acrylate SU 574 is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applicati...veja mais Aliphatic Urethane Acrylate SU 574 is a tri-functional aliphatic urethane acrylate oligomer designed to provide abrasion resistance, stain resistance, flexibility, toughness, light color, and good surface curing. This product is commonly used in applications such as wood flooring, light stable coatings, plastic coatings, overprint varnishes, and screen inks. Aliphatic Urethane Acrylate SU 574 is 87% polymer solid by weight with an mPa.s viscosity of 1,500-2,500 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 580 | Soltech Ltd | Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, ...veja mais Aliphatic Urethane Acrylate SU 580 is a di-functional aliphatic urethane acrylate oligomer designed to provide durability, flexibility, toughness, low odor, and light color. This product is commonly used in applications such as pigment coatings for wood, adhesives for glass, metal coatings, plastic coatings, and screen ink binders. Aliphatic Urethane Acrylate SU 580 is 100% polymer solid by weight with an mPa.s viscosity of 13,000-19,000 at 60℃. veja menos | |
| Aliphatic Urethane Acrylate SU 588 | Soltech Ltd | Aliphatic Urethane Acrylate SU 588 is an aliphatic urethane triacrylate oligomer diluted with approximately 10% of ethoxy-ethoxyethyl acrylate that is designed to provide flexibility, toughness, low odor, fast curing, and light color. This product is comm...veja mais Aliphatic Urethane Acrylate SU 588 is an aliphatic urethane triacrylate oligomer diluted with approximately 10% of ethoxy-ethoxyethyl acrylate that is designed to provide flexibility, toughness, low odor, fast curing, and light color. This product is commonly used in applications such as wood top coats, coatings for rigid and flexible plastic, floor tile coatings, and screen print inks. Aliphatic Urethane Acrylate SU 588 is 90% polymer solid by weight with an mPa.s viscosity of 8,000-12,000 at 65℃. veja menos | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...veja mais Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. veja menos | |
| Alpha-Rez™ 3500 E | Lawter | Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigmen...veja mais Alpha-Rez™ 3500 E is a low viscous, modified hydrocarbon resin that has high solubility and displays a good gel response to aluminum gelling agents. It also has a lower water pick-up and functions as a water balance regulator. The product has ideal pigment wetting properties causing inks to display a higher gloss. It is used in offset, grinding varnishes and letterpress applications. veja menos | |
| Alpha-Rez™ 3750 E | Lawter | Alpha-Rez™ 3750 E is a modified hydrocarbon resin with a medium soluble, medium viscous resin that displays a low water pick-up and is ideal for use as a water balance regulator. It shows good pigment wetting properties with a high ink gloss. It is used i...veja mais Alpha-Rez™ 3750 E is a modified hydrocarbon resin with a medium soluble, medium viscous resin that displays a low water pick-up and is ideal for use as a water balance regulator. It shows good pigment wetting properties with a high ink gloss. It is used in offset, sheet-fed offset and grinding varnishes. veja menos | |
| Alpha-Rez™ 9000 E | Lawter | Alpha-Rez™ 9000 E is a hybrid resin with a high viscosity and high solubility that is suitable for use in high speed presses. It displays ideal water balance and has the benefit of having low tack and low misting properties. The product is used in offset,...veja mais Alpha-Rez™ 9000 E is a hybrid resin with a high viscosity and high solubility that is suitable for use in high speed presses. It displays ideal water balance and has the benefit of having low tack and low misting properties. The product is used in offset, sheet-fed and gloss offset as well as letterpress applications. veja menos | |
| Alpha-Rez™ 9250 E | Lawter | Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using ...veja mais Alpha-Rez™ 9250 E is a hybrid resin composed of visco-elastic hydrocarbons and hybrid resins that display a high viscosity and medium solubility. The product has good water balance, low misting and low tack properties. It can be used in offset inks using fast-running printing processes. veja menos | |
| AM-1345XL | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-1345XL, in the form of a clear liquid, is a high solids aliphatic isocyanate crosslinker that is dispersible in water. It is used in leather base coat or topcoat application to improve physical properties and long term durability of the coating. | |
| AM-80 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applicatio...veja mais AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applications at levels from 1-4% to increase viscosity and enhance the rheology properties of roll coated base coats. . veja menos | |
| AM-83 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AM-83, in the form of a translucent liquid, is a rheological additive suitable for topcoat or base coat applications. It maintains viscosity under high shear and provides effective thickening independent of pH. It is used in leather base coat or topcoat a...veja mais AM-83, in the form of a translucent liquid, is a rheological additive suitable for topcoat or base coat applications. It maintains viscosity under high shear and provides effective thickening independent of pH. It is used in leather base coat or topcoat applications at levels from 1-5% to increase viscosity and enhance the rheology properties of the coating. veja menos | |
| Amine Synergist SZ 115 | Soltech Ltd | Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include ove...veja mais Amine Synergist SZ 115 is reactive amine additive used in place of more fugitive amine synergists that is designed to provide increased curing speed, light color, stability, low viscosity and low volatility. Common applications of this product include overprint varnishes, silk screen inks, flexo inks, pigment coatings, and wood sealers. Amine Synergist SZ 115 is 100% polymer solid by weight with a viscosity of 15-25 at 25℃. veja menos | |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...veja mais ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. veja menos | Request Sample |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...veja mais ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. veja menos | Request Sample |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...veja mais ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. veja menos | Request Sample |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antiox 2246 | Ichemco | Antiox 2246 is a phenolic antioxidant. This product has a melting range of greater than 125°C. Antiox 2246 is most commonly used as an antioxidant in solvent-based adhesive applications. | |
| Antiox AHM | Ichemco | Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and c...veja mais Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. veja menos | |
| Antiox AHM-EC Pellets | Ichemco | Antiox AHM-EC Pellets are a blend of four non-staining antioxidants. This product has a total solids content of 98-100%. Antiox AHM-EC Pellets are most commonly used as a UV protector in pressure sensitive adhesive and coating applications. | |
| Antiox LX | Ichemco | Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural r...veja mais Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural rubber, SBR, and resin adhesive applications. veja menos | |
| Antischiuma FL5 | Ichemco | Antischiuma FL5 is a VOC-free, organic defoamer. This product has a Brookfield viscosity at 25°C of 200-500 mPa.s. Antischiuma FL5 is most commonly used as a defoaming agent in water-based adhesive production applications. | |
| AQUACER 571 | BYK | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. |
