| BYK®-370 | BYK | Aditivo reativo de superfície de silicone. Solução de um polidimetilsiloxano hidroxi-funcional modificado com poliéster. | |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...veja mais CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). veja menos | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...veja mais CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. veja menos | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...veja mais CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). veja menos | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...veja mais CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). veja menos | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...veja mais CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. veja menos | |
| Michem® Prime 2960 | Michelman | Michem® Prime 2960 is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the corrosion, water, grease, oil and solvent resistance of coatings and adhesives. | |
| SST®-5D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and ...veja mais SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating systems. veja menos |
