| Agrocer® Blue 153 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning o...veja mais Agrocer® Blue 153 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Blue 153 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. veja menos | Request Sample |
| Agrocer® Green 007 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning ...veja mais Agrocer® Green 007 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Green 007 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. veja menos | Request Sample |
| Agrocer® Red 112 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...veja mais Agrocer® Red 112 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 112 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. In comparison to Pigment Red 48:2, Agrocer® Red 112 disp. exhibits superior compatibility in pesticide formulations and seed coatings. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. veja menos | Request Sample |
| Agrocer® Red 482 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of...veja mais Agrocer® Red 482 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Red 482 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. All Agrocer® dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. veja menos | Request Sample |
| Agrocer® Violet 023 Disp. | Clariant Plastics and Coatings (Dispersions) | Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning...veja mais Agrocer® Violet 023 Disp. is an aqueous pigment dispersion that is recommended for the coloration of seeds. The pigment dispersions from the Agrocer® disp. range are easy to handle, readily pumpable for simple dosing and mixing and facilitate the cleaning of production equipment. Due to its composition, Agrocer® Violet 023 disp. is highly compatible with common seed treatment pesticide formulations as well as seed coating products. Agrocer® Violet 023 disp. gives very attractive color shades and seeds a high-quality appearance. All Agrocer dispersions are manufactured without using alkyl phenol ethoxylate (APEO) and do not require any hazardous labeling. veja menos | Request Sample |
| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...veja mais Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. veja menos | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...veja mais Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. veja menos | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...veja mais Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. veja menos | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 é uma solução de polímero associativo e não iônico destinada para aumentar a consistência Stormer e fornecer fluxo superior e nivelamento em revestimentos e tintas a base de água. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...veja mais Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. veja menos | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...veja mais Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. veja menos | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...veja mais Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. veja menos | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...veja mais Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. veja menos | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...veja mais Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. veja menos | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...veja mais Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). veja menos | |
| Aquanyl Blue AN 500 - Pigment Blue 15:0 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Blue AN 500 is a water-based dispersion of Pigment Blue 15:0. It is binder-free, solvent-free and based on nonionic and / or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Aquanyl® Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Aquanyl® Red D3GD 500 is an aqueous pigment dispersion recommended for water-based coatings and paints. | Request Sample |
| Aquanyl Yellow YT 100 - Pigment Yellow 65 | Clariant Plastics and Coatings (Dispersions) | Aquanyl Yellow YT 100 is an aqueous pigment dispersion recommended for water-based coatings. | Request Sample |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...veja mais BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. veja menos | |
| Colanyl Black N 131 - MX - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the ...veja mais Colanyl Black N 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. veja menos | Request Sample |
| Colanyl Black N 500 - Pigment Black 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main app...veja mais Colanyl Black N 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Black N 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Black N 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Black N 500 has to be checked in the customer paint system itself. veja menos | Request Sample |
| Colanyl Blue A2R 131 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...veja mais Colanyl Blue A2R 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. veja menos | Request Sample |
| Colanyl Blue A2R 500 - Pigment Blue 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main ap...veja mais Colanyl Blue A2R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* The main application fields of Colanyl Blue A2R 500 are new generation of dispersion paints and renderings/plaster based on aqueous polymer dispersions. Colanyl Blue A2R 500 is also compatible with some other binder systems, e.g. water-based industrial paints, but the maximum dosage level and compatibility of Colanyl Blue A2R 500 has to be checked in the customer paint system itself. By using Colanyl Blue A2R 500 in automatic and manual dispensers, excellent accuracy and reliability when poured or pumped have been observed. Furthermore, Colanyl Blue A2R 500 is miscible in all proportions with other Colanyl 500 preparations. By adding Colanyl Extender MS 530, the color strength of Colanyl Blue A2R 500 can be adjusted. veja menos | Request Sample |
| Colanyl Blue A4R 130-MX - Pigment 15:1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue A4R 130-MX is a pigment dispersion based on phthalocyanine blue for water-based coatings. | Request Sample |
| Colanyl Blue B2G 131 - Pigment Blue 15:3 | Clariant Plastics and Coatings (Dispersions) | Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its...veja mais Colanyl Blue B2G 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of its good durability, it can be used for interior and exterior use after adequate weathering tests. veja menos | Request Sample |
| Colanyl Carmine FBB 133-MX - Pigment Red 146 | Clariant Plastics and Coatings (Dispersions) | Colanyl Carmine FBB 133-MX is an aqueous pigment dispersion based on PR 146 for water-based coatings. | Request Sample |
| Colanyl Extender MS 530 - Filler | Clariant Plastics and Coatings (Dispersions) | Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC...veja mais Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* veja menos | Request Sample |
| Colanyl Green GG 500 - Pigment Green 7 | Clariant Plastics and Coatings (Dispersions) | Colanyl Green GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Oxide Black B 530 - Pigment Black 11 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.*...veja mais Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* Colanyl Oxide Black B 530 VP3206 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* veja menos | Request Sample |
| Colanyl Oxide Black IR 500 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...veja mais Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings.* Colanyl Oxide Black IR 500 VP 5148 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water based, VOC-free and VOC-low decorative coatings. veja menos | Request Sample |
| Colanyl Oxide Blue COR 530 - Pigment Blue 28 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Blue COR 530 VP3210 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Green G 530 - Pigment Green 17 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings....veja mais Colanyl Oxide Green G 530 VP 3834 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* veja menos | Request Sample |
| Colanyl Oxide Red B 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red B 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Red G 530 - Pigment Red 101 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Red G 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings. | Request Sample |
| Colanyl Oxide Yellow BV 530 - Pigment Yellow 184 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow BV 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coating.* | Request Sample |
| Colanyl Oxide Yellow CR 530 - Pigment Brown 24 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings...veja mais Colanyl Oxide Yellow CR 530 VP3198 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* veja menos | Request Sample |
| Colanyl Oxide Yellow R 132 - MX - Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because ...veja mais Colanyl Oxide Yellow R 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the excellent weathering fastness, it is suitable for interior and exterior use. veja menos | Request Sample |
| Colanyl Oxide Yellow R 531- Pigment Yellow 42 | Clariant Plastics and Coatings (Dispersions) | Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative co...veja mais Colanyl Oxide Yellow R 531 VP 3888 is a aqueous, binder-free pigment preparation and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation are compatible with water-based, VOC-free and VOC-low decorative coatings. veja menos | Request Sample |
| Colanyl Pink E-WD 530 VP 5275 - Pigment Red 122 | Clariant Plastics and Coatings (Dispersions) | Colanyl Pink E-WD 530 VP 5275 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red D3GD 500 - Pigment Red 254 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red D3GD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500 - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red E3B 500-MX - Pigment Violet 19 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red E3B 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red F5RK 130 - MX - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 130 is an aqueous pigment dispersion based on PR 170 for water-based coatings. | Request Sample |
| Colanyl Red F5RK 500 - Pigment Red 170 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red F5RK 500 is a binder- and solvent-free, aqueous pigment preparation of Pigment Red 170 and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based coatings. | Request Sample |
| Colanyl Red FGR 530 - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGR 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red FGRG 130 - MX - Pigment Red 112 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...veja mais Colanyl Red FGRG 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. veja menos | Request Sample |
| Colanyl Red GG 131 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the m...veja mais Colanyl Red GG 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. veja menos | Request Sample |
| Colanyl Red GG 500 - Pigment Orange 5 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red GG 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Red HF3S 500 - Pigment Red 188 | Clariant Plastics and Coatings (Dispersions) | Colanyl Red HF3S 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Scarlet GO 530 - Pigment Red 168 | Clariant Plastics and Coatings (Dispersions) | Colanyl Scarlet GO 530 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Violet RL 131 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of th...veja mais Colanyl Violet RL 131 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. veja menos | Request Sample |
| Colanyl Violet RL 530 - Pigment Violet 23 | Clariant Plastics and Coatings (Dispersions) | Colanyl Violet RL 530 VP 5335 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White R 500 - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White R 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl White RN 500 - MX - Pigment White 6 | Clariant Plastics and Coatings (Dispersions) | Colanyl White RN 500-MX is a very low VOC, water-based pigment preparation of Pigment White 6. It is binder-free, solvent-free and based on nonionic and/or anionic wetting and dispersing agents. Recommended for water-based paints and coatings. | Request Sample |
| Colanyl Yellow 2GXD 130 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of ...veja mais Colanyl Yellow 2GXD 130 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. veja menos | Request Sample |
| Colanyl Yellow 2GXD 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 2GXD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow 5GX 500 - Pigment Yellow 74 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow 5GX 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow FGL 500 - Pigment Yellow 97 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow FGL 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow G 132 - Pigment Yellow 1 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the...veja mais Colanyl Yellow G 132 is a binder-free, aqueous pigment preparation based on nonionic and/or anionic wetting and dispersing agents and propylene glycol. The product has a pourable and pumpable consistency and is suitable for dosing machines. Because of the moderate durability, it is suitable for interior use only. veja menos | Request Sample |
| Colanyl Yellow H3G 500 - Pigment Yellow 154 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow H3G 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Colanyl Yellow HRD 500 - Pigment Yellow 83 | Clariant Plastics and Coatings (Dispersions) | Colanyl Yellow HRD 500 is an aqueous binder-free pigment preparation manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* | Request Sample |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...veja mais Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. veja menos | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...veja mais CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. veja menos | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 é a forma neutralizada (sais de potássio) de um etoxilado alifático álcool fosfato éster. É destinado para proporcionar aceitação de cor e brilho aperfeiçoada em tintas látex a base de água. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ CO-180HS surfactante é a forma neutralizada (sal de sódio) de um éster de fosfato de álcoois alifáticos etoxilados. Ele é projetado para dar brilho melhorado e aceitação da cor em tintas látex à base de água. Dependendo das especificações de form...veja mais Dextrol™ CO-180HS surfactante é a forma neutralizada (sal de sódio) de um éster de fosfato de álcoois alifáticos etoxilados. Ele é projetado para dar brilho melhorado e aceitação da cor em tintas látex à base de água. Dependendo das especificações de formulação, este produto pode também funcionar como um agente dispersante suplementar para ajudar na redução da floculação do pigmento. Além da utilização em tintas de látex, Dextrol™ CO-180HS surfactante proporciona benefícios em corantes universais, para ajudar a dispersar e estabilizar os pigmentos, aumentando assim a aceitação da cor das tintas à base de água. veja menos | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 é a forma sem ácido de um tridecil álcool etoxilado fosfato éster. É um emulsionante efetivo na polimerização de emulsão e fornece o látex acabado com baixo coágulo e tratamento aperfeiçoado e estabilidade de armazenamento. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 é um sal de hidróxido de amônio neutralizado, promotor de aceitação de cor e brilho sem APE, emulsionante para polimerização de emulsão com sensibilidade de água reduzida em películas secas, e dispersante auxiliar com propriedades anticor...veja mais Dextrol™ OC-6025 é um sal de hidróxido de amônio neutralizado, promotor de aceitação de cor e brilho sem APE, emulsionante para polimerização de emulsão com sensibilidade de água reduzida em películas secas, e dispersante auxiliar com propriedades anticorrosivas. veja menos | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...veja mais Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. veja menos | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 é a forma sem ácido de um tridecil álcool etoxilado fosfato éster. É um emulsionante efetivo na polimerização de emulsão e fornece o látex acabado com baixo coágulo e tratamento aperfeiçoado e estabilidade de armazenamento. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...veja mais Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. veja menos | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 é um sal de hidróxido de amônio neutralizado, promotor de aceitação de cor e brilho sem APE, emulsionante para polimerização de emulsão com sensibilidade de água reduzida em películas secas, e dispersante auxiliar com propriedades anticor...veja mais Dextrol™ OC-7525 é um sal de hidróxido de amônio neutralizado, promotor de aceitação de cor e brilho sem APE, emulsionante para polimerização de emulsão com sensibilidade de água reduzida em películas secas, e dispersante auxiliar com propriedades anticorrosivas. veja menos | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...veja mais Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. veja menos | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...veja mais Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. veja menos | |
| Drew™ 210-886 | Ashland | Drew® 210-886 é um agente de controle de espuma, especialmente concebido para utilização em revestimentos de superfície, vernizes de impressão e a síntese de emulsões de polímeros. Devido a sua alta facilidade de incorporação, tem-se revelado particularme...veja mais Drew® 210-886 é um agente de controle de espuma, especialmente concebido para utilização em revestimentos de superfície, vernizes de impressão e a síntese de emulsões de polímeros. Devido a sua alta facilidade de incorporação, tem-se revelado particularmente adequado para sistemas de revestimento de baixa viscosidade, como seladores e acabamentos aplicados por revestimento por flowcoat, mergulho, cortina ou rolo e pincel. Em níveis elevados de dosagem, Drew® 210-886 apresenta excelente desempenho em pulverização ou pulverização sem ar aplicados em acabamentos de elevada espessura. veja menos | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...veja mais Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. veja menos | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...veja mais Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. veja menos | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...veja mais Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. veja menos | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...veja mais Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. veja menos | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...veja mais Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. veja menos | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...veja mais Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. veja menos | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...veja mais Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. veja menos | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | O agente de controle de espuma Drewplus® S-4273 é projetado para uso em revestimentos de superfície e tintas de impressão. Este produto é recomendado para controle de espuma em revestimentos industriais de madeira, semi-brilho, tintas arquitetônicas de a...veja mais O agente de controle de espuma Drewplus® S-4273 é projetado para uso em revestimentos de superfície e tintas de impressão. Este produto é recomendado para controle de espuma em revestimentos industriais de madeira, semi-brilho, tintas arquitetônicas de alto brilho e adesivos. Excelentes resultados também foram alcançados em tintas de impressão flexográfica e vernizes de impressão. veja menos | |
| Drewplus™ S-4287 | Ashland | Drewplus® S-4287 (anteriormente conhecido como DREW 210-793) é um agente de controle de espuma para utilização em revestimentos à base de água. É especialmente recomendado para tintas decorativas de alto brilho. Excelentes resultados foram também obtidos ...veja mais Drewplus® S-4287 (anteriormente conhecido como DREW 210-793) é um agente de controle de espuma para utilização em revestimentos à base de água. É especialmente recomendado para tintas decorativas de alto brilho. Excelentes resultados foram também obtidos em vernizes de parquet. Ele também fornece propriedades de desaeração excelentes em sistemas em spray baixa viscosidade (sem ar). Drewplus® S-4287 exibe um excelente equilíbrio entre a atividade e a compatibilidade e é altamente eficiente. É um produto com zero V.O.C. veja menos | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | O agente de controle de espuma Drewplus™ S-4288 é uma formulação proprietária não iônica de agentes tensoativos, silicones. Ele é projetado para uso em revestimentos à base de água. O agente de controle de espuma Drewplus™ S-4288 é recomendado para tintas...veja mais O agente de controle de espuma Drewplus™ S-4288 é uma formulação proprietária não iônica de agentes tensoativos, silicones. Ele é projetado para uso em revestimentos à base de água. O agente de controle de espuma Drewplus™ S-4288 é recomendado para tintas decorativas de alto brilho. Excelentes resultados foram também obtidos em vernizes de parquet. O agente de controle de espuma Drewplus™ S-4288 fornece propriedades de desaeração excelentes em sistemas em spray baixa viscosidade (sem ar). O O agente de controle de espuma Drewplus™ S-4288 exibe um excelente equilíbrio entre a atividade e a compatibilidade e é altamente eficiente. veja menos | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | O O agente de controle de espuma Drewplus™ S-4374 é projetado especialmente para uso em revestimentos de superfície, vernizes de impressão e tintas pigmentadas. O produto provou ser particularmente adequado para utilização em revestimentos de madeira indu...veja mais O O agente de controle de espuma Drewplus™ S-4374 é projetado especialmente para uso em revestimentos de superfície, vernizes de impressão e tintas pigmentadas. O produto provou ser particularmente adequado para utilização em revestimentos de madeira industrial, aplicado por revestimento de fluxo, imersão, revestimento por cortina ou por pulverização; e também exibe um excelente desempenho em sistemas de revestimento aplicados de madeira por pincel ou rolo. O agente de controle de espuma Drewplus™ S-4374 é uma emulsão de 40 por cento ativa de agentes ativos de superfície e hidrófobos em água. veja menos | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | O agentes de controle de espuma Drewplus® S-4386 é uma emulsão aquosa não-iônica de derivados de sílica, silicones, e surfactantes. É formulado para uso em revestimentos à base de água, tintas de impressão, artes gráficas, revestimentos de madeira e tinta...veja mais O agentes de controle de espuma Drewplus® S-4386 é uma emulsão aquosa não-iônica de derivados de sílica, silicones, e surfactantes. É formulado para uso em revestimentos à base de água, tintas de impressão, artes gráficas, revestimentos de madeira e tintas decorativas de alto brilho. É um agente de controle de espuma altamente eficiente, com um desempenho rápido, excelente persistência e compatibilidade. veja menos | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | O agente de controle de espuma Drewplus® S-4480 é uma mistura não iônica de silicones e óleo parafínico. É formulado para uso em revestimentos à base de água, especialmente em sistemas claros. É um agente de controle de espuma altamente eficiente, com um ...veja mais O agente de controle de espuma Drewplus® S-4480 é uma mistura não iônica de silicones e óleo parafínico. É formulado para uso em revestimentos à base de água, especialmente em sistemas claros. É um agente de controle de espuma altamente eficiente, com um desempenho rápido, excelente persistência e compatibilidade. Como funciona como um agente de liberação de ar, é particularmente eficaz em microespuma em revestimentos aplicados por pulverização. veja menos | |
| Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...veja mais Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. veja menos | |
| Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...veja mais Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. veja menos | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...veja mais Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. veja menos | |
| Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...veja mais Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. veja menos | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...veja mais Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. veja menos | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...veja mais Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. veja menos | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus® T-4303 é um agente de controle de espuma 100% ativo para utilização em revestimento e processos de polimerização em emulsão. Excelentes resultados foram obtidos em sistemas à base de acetato de polivinila, adesivos sensíveis à pressão, e tintas ...veja mais Drewplus® T-4303 é um agente de controle de espuma 100% ativo para utilização em revestimento e processos de polimerização em emulsão. Excelentes resultados foram obtidos em sistemas à base de acetato de polivinila, adesivos sensíveis à pressão, e tintas de impressão flexográficas. Drewplus® T-4303 é uma formulação proprietária não iônica de derivados de sílica, óleo mineral e ésteres. veja menos | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...veja mais Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. veja menos | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | O agente de controle de espuma Drewplus™ TS-4384 é uma formulação não iônica proprietária de derivados de sílica, silicones e agentes ativos de superfície para utilização em revestimentos e tintas de impressão. Este produto é especialmente recomendado par...veja mais O agente de controle de espuma Drewplus™ TS-4384 é uma formulação não iônica proprietária de derivados de sílica, silicones e agentes ativos de superfície para utilização em revestimentos e tintas de impressão. Este produto é especialmente recomendado para revestimentos de madeira, tintas acrílicas arquitetônicas semi-brilho, de alto brilho e vernizes de parquet à base de água. Excelentes resultados foram também obtidos em primers anti-corrosivos acrílicos, tintas de impressão flexográfica e sistemas baseados em alquidas redutível em água. O agente de controle de espuma Drewplus™ TS-4384 é altamente eficiente e apresenta excelente persistência. veja menos |
