| PEL-ALC™ 235 | Ele Corporation | PEL-ALC™ 235 is a low foaming, nonionic surfactant that exhibits excellent wetting action. It may be readily formulated into highly alkaline built liquid systems. Solutions of PEL-ALC™ 235 resist foam development even under extreme or prolonged agitation....veja mais PEL-ALC™ 235 is a low foaming, nonionic surfactant that exhibits excellent wetting action. It may be readily formulated into highly alkaline built liquid systems. Solutions of PEL-ALC™ 235 resist foam development even under extreme or prolonged agitation. This product can be used in a variety of applications including mechanical dishwashing, rinse aids, metal cleaning, spray washing and general purpose cleaning. veja menos | |
| PEL-ALC™ 471-A | Ele Corporation | PEL-ALC™ 471-A is a fatty alcohol, ethoxylated and propoxylated. It is a lower-foaming surfactant used in general purpose cleaners. This product has a cloud point of 18˚ C. | |
| PEL-ALC™ 91-6 | Ele Corporation | PEL-ALC™ 91-6 is based on Shell Chemical’s C9-11 Neodol alcohol a linear oxo alcohol. It is ethoxylated with 6 moles of ethylene oxide. It dissolves quickly in water and provides good wetting and detergency. | |
| PEL-ALC™ 926 | Ele Corporation | PEL-ALC™ 926 is an excellent surfactant and wetting agent for metal and other hard surface cleaners. It is quick wetting and generates little foam when used in mechanical washing systems. This product is a naturally-derived, biodegradable, co-emulsifier a...veja mais PEL-ALC™ 926 is an excellent surfactant and wetting agent for metal and other hard surface cleaners. It is quick wetting and generates little foam when used in mechanical washing systems. This product is a naturally-derived, biodegradable, co-emulsifier and lubricant with wetting properties. It is used in boundary lubricants, C&G fluids, hard surface and metal cleaners. PEL-ALC™ 926 has a cloud point of 32-37˚ C. veja menos | |
| PEL-ALC™ 991 | Ele Corporation | PEL-ALC™ 991 is a water-miscible boundary lubricant with W/O emulsification properties. It is used for the formulation of metal working compounds, a good wetting agent and a dispersant. It is useful in lubricating and rolling oils, semi-synthetic cutting ...veja mais PEL-ALC™ 991 is a water-miscible boundary lubricant with W/O emulsification properties. It is used for the formulation of metal working compounds, a good wetting agent and a dispersant. It is useful in lubricating and rolling oils, semi-synthetic cutting fluids, and hydraulic and water-based cutting fluids. This product is biodegradable with a low toxicity profile. veja menos | |
| PEL-ALC™ B-25-5L | Ele Corporation | PEL-ALC™ B-25-5L is lauryl alcohol, ethoxylated and propoxylated. It is a naturally-derived, low-foaming B-25-5-type surfactant with good cleaning, wetting, boundary lubrication and emulsification properties. This product has a cloud point of 61˚ C. | |
| PEL-ALC™ B-26 | Ele Corporation | PEL-ALC™ B-26 is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition to...veja mais PEL-ALC™ B-26 is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition to its cleaning properties including wetting, emulsification, high temperature stability and dispersion, PEL-ALC™ B-26 can be used in combination with standard anionic, nonionic or cationic ingredients to solve foaming problems when high mechanical energy cleaning procedures are used. This surfactant is ideally suited for various textile processes, metal cleaners, industrial and institutional cleansers. veja menos | |
| PEL-ALC™ B-26-L | Ele Corporation | PEL-ALC™ B-26-L is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition ...veja mais PEL-ALC™ B-26-L is a low foam nonionic detergent. It is a monofunctional, linear alcohol alkoxylate that is 100% active and relatively nontoxic. This product is an excellent detergent for household and industrial use in cleaning applications. In addition to its cleaning properties including wetting, emulsification, high temperature stability and dispersion, PEL-ALC™ B-26-L can be used in combination with standard anionic, nonionic or cationic ingredients to solve foaming problems when high mechanical energy cleaning procedures are used. This surfactant is ideally suited for various textile processes, metal cleaners, industrial and institutional cleansers. veja menos | |
| PEL-ALC™ BL-225 | Ele Corporation | PEL-ALC™ BL-225 is a nonionic surfactant with excellent hard surface detergency, a low propensity to foam and with good wetting. It is stable in acids and bases and soluble in both water and many organic solvents. This product may be used as a rinse aid i...veja mais PEL-ALC™ BL-225 is a nonionic surfactant with excellent hard surface detergency, a low propensity to foam and with good wetting. It is stable in acids and bases and soluble in both water and many organic solvents. This product may be used as a rinse aid in commercial dishwashing, as a textile scour and in metal cleaning applications. veja menos | |
| PEL-ALC™ BL-240 | Ele Corporation | PEL-ALC™ BL-240 is a linear alcohol EO/PO copolymer. It produces a rather low amount of foam, making it particularly suited to high temperature cleaning and auto dish rinse aids. | |
| PEL-ALC™ CSA-20 | Ele Corporation | PEL-ALC™ CSA-20 is an excellent emulsifier and is used in personal care products as a wetting agent, solubilizer, conditioner and coupling agent. It is used in various cosmetic and toiletries such as cream rinses, conditioners, bath oils, creams, lotions,...veja mais PEL-ALC™ CSA-20 is an excellent emulsifier and is used in personal care products as a wetting agent, solubilizer, conditioner and coupling agent. It is used in various cosmetic and toiletries such as cream rinses, conditioners, bath oils, creams, lotions, deodorants, antiperspirants and shaving products. It is a mild, almost odorless, nonionic surfactant. PEL-ALC CSA-20, Ceteareth-20, is a synergistic primary O/W emulsifier that is stable at pH extremes. It is typically used at 0.5-5%. It is a waxy solid with an HLB of 15.7. veja menos | |
| PEL-ALC™ D-25-L | Ele Corporation | PEL-ALC™ D-25-L is a low foaming, linear alcohol alkoxylate based on natural lauryl alcohol. It is a nonionic surfactant that is 100% active, biodegradable, and relatively nontoxic. It is an excellent detergent for household and industrial use in cleaning...veja mais PEL-ALC™ D-25-L is a low foaming, linear alcohol alkoxylate based on natural lauryl alcohol. It is a nonionic surfactant that is 100% active, biodegradable, and relatively nontoxic. It is an excellent detergent for household and industrial use in cleaning applications. In addition to its cleaning properties, it can be used in combination with standard anionic, nonionic or cationic ingredients to solve foaming problems when high mechanical energy cleaning procedures are used. veja menos | |
| PEL-ALC™ DF-16 | Ele Corporation | PEL-ALC™ DF-16 is a low foaming nonionic surfactant and wetting agent. It provides good hard surface detergency while offering excellent acid and base stability. In addition, it is readily biodegradable. | |
| PEL-ALC™ MTP-070 | Ele Corporation | PEL-ALC™ MTP-070 is a low-foaming, good dispersing co-emulsifier and boundary lubricant with excellent mineral solubility. It is based on a fatty alcohol of vegetable origin. It is often used as a replacement for PEG-5 Oleyl Ether. This raw material is re...veja mais PEL-ALC™ MTP-070 is a low-foaming, good dispersing co-emulsifier and boundary lubricant with excellent mineral solubility. It is based on a fatty alcohol of vegetable origin. It is often used as a replacement for PEG-5 Oleyl Ether. This raw material is readily available from a variety of sources globally and therefore not exposed to supply volatility. It is a liquid product that is easily poured and pumped. veja menos | |
| PEL-ALC™ OA-2 | Ele Corporation | PEL-ALC™ OA-2, a brand of PEG-2 oleyl ether, is 100% active and supplied as a liquid. It is derived from a vegetable-sourced alcohol and is commonly used in pomades and hair coloring products. PEL-ALC OA-2 is an excellent low-foaming water in oil emulsifi...veja mais PEL-ALC™ OA-2, a brand of PEG-2 oleyl ether, is 100% active and supplied as a liquid. It is derived from a vegetable-sourced alcohol and is commonly used in pomades and hair coloring products. PEL-ALC OA-2 is an excellent low-foaming water in oil emulsifier for personal care, metal working applications, and C&G fluids. It is also an intermediate for use in making phosphate esters and sulfosuccinates. veja menos | |
| PEL-ALC™ OA-23 | Ele Corporation | PEL-ALC™ OA-23 is PEG-23 oleyl ether. It is 100% active, and it is supplied as a waxy solid. This product is an exceptional nonionic oil in water emulsifier and is recommended for a wide range of product types and applications. PEL-ALC™ OA-23 is derived f...veja mais PEL-ALC™ OA-23 is PEG-23 oleyl ether. It is 100% active, and it is supplied as a waxy solid. This product is an exceptional nonionic oil in water emulsifier and is recommended for a wide range of product types and applications. PEL-ALC™ OA-23 is derived from a vegetable derived alcohol, and is an easy-to-use solid form. Its nonionic nature makes it an ideal candidate for use in leave-on skin care products. Recommended use levels range from 0.5% to 10.0%, depending on application. veja menos | |
| PEL-ALC™ OA-4 | Ele Corporation | PEL-ALC™ OA-4 is an excellent lower-foaming, good wetting co-emulsifier and boundary lubricant for mineral oils. Stable emulsions of mineral oils can be obtained with about 11% emulsifier based on the weight of the oil to be emulsified. Emulsions are best...veja mais PEL-ALC™ OA-4 is an excellent lower-foaming, good wetting co-emulsifier and boundary lubricant for mineral oils. Stable emulsions of mineral oils can be obtained with about 11% emulsifier based on the weight of the oil to be emulsified. Emulsions are best prepared by stirring the oil and emulsifier mixture into the water phase. This product is used for cleaners and C&G fluids. veja menos | |
| PEL-ALC™ OA-5 | Ele Corporation | PEL-ALC™ OA-5 is an excellent boundary lubricant and low-foaming co-emulsifier for mineral oils. Stable emulsions of mineral oils can be obtained with about 11% emulsifier based on the weight of the oil to be emulsified. Emulsions are best prepared by sti...veja mais PEL-ALC™ OA-5 is an excellent boundary lubricant and low-foaming co-emulsifier for mineral oils. Stable emulsions of mineral oils can be obtained with about 11% emulsifier based on the weight of the oil to be emulsified. Emulsions are best prepared by stirring the oil/emulsifier mixture into the water phase. This product is used in cleaners and C&G fluids. veja menos | |
| PEL-ALC™ RA-40-L | Ele Corporation | PEL-ALC™ RA-40-L is a linear alcohol alkoxylate based on a renewable feedstock. It is a naturally-derived, low foaming nonionic surfactant that is 100% active and biodegradable. PEL-ALC™ RA-40-L is an excellent detergent for cleaning applications. It perf...veja mais PEL-ALC™ RA-40-L is a linear alcohol alkoxylate based on a renewable feedstock. It is a naturally-derived, low foaming nonionic surfactant that is 100% active and biodegradable. PEL-ALC™ RA-40-L is an excellent detergent for cleaning applications. It performs as a wetting agent, defoamer, emulsifier and dispersant. In particular, this grade has exceptional grease dispersing properties while generating minimal foam veja menos | |
| PEL-ALC™ TDA-3 | Ele Corporation | PEL-ALC™ TDA-3 surfactant is a 100% active, ethoxylated isotridecyl alcohol. It has excellent rapid wetting properties, relatively low foaming, and exhibits good detergency. This product is used as an emulsifier, dispersant, solubilizer, and detergent. | |
| PEL-AMID™ EWDP | Ele Corporation | PEL-AMID™ EWDP is a DEA-free fatty amide designed for incorporation into most water dilutable metalworking products. PEL-AMID™ EWDP, in addition to corrosion inhibition, provides enhanced boundary lubricity and metal wetting characteristics to the finishe...veja mais PEL-AMID™ EWDP is a DEA-free fatty amide designed for incorporation into most water dilutable metalworking products. PEL-AMID™ EWDP, in addition to corrosion inhibition, provides enhanced boundary lubricity and metal wetting characteristics to the finished coolant. In addition, it offers enhanced hard water stability compared to the conventional DEA-containing amides. It is recommended at levels of 5 - 10% in semi-synthetics and synthetic fluids. Higher levels, from 10 to 20%, are recommended for water soluble drawing compounds. In these applications, PEL-AMID™ EWDP produces elevated viscosity and high film strength when the finished product is inverted with water. At normal ambient temperatures, PEL-AMID™ EWDP is a liquid. At cooler temperatures, gelling or solidification may occur. Gradual warming of the material will return the product to the typical homogeneous fluid appearance. veja menos | |
| PEL-AMID™ ODG-1.0 | Ele Corporation | PEL-AMID™ ODG-1.0 is a DEA-free, naturally derived 1:1 tall oil alkanolamide, which is designed for use in industrial preparations as a lubricant and emulsifier. PEL-AMID ODG-1.0 is a good viscosity index improver in anionic systems and it is a suitable r...veja mais PEL-AMID™ ODG-1.0 is a DEA-free, naturally derived 1:1 tall oil alkanolamide, which is designed for use in industrial preparations as a lubricant and emulsifier. PEL-AMID ODG-1.0 is a good viscosity index improver in anionic systems and it is a suitable replacement for tall oil diethanolamide in many instances. This product is free of any trace of diethanolamine. veja menos | |
| PEL-AMID™ RDP-1.0 | Ele Corporation | PEL-AMID™ RDP-1.0 is a nonionic surfactant and emulsifier with a low HLB. It is produced by from canola oil and diisopropanolamine. In metal working applications, it serves as a lubricant, corrosion inhibitor and an emulsifier for soluble oils. Metalworki...veja mais PEL-AMID™ RDP-1.0 is a nonionic surfactant and emulsifier with a low HLB. It is produced by from canola oil and diisopropanolamine. In metal working applications, it serves as a lubricant, corrosion inhibitor and an emulsifier for soluble oils. Metalworking fluids may be formulated for tapping, broaching, drilling, drawing, and other general machining operations with this product. PELAMID™ RDP-1.0 is completely DEA-free and has higher reserve alkalinity than does conventional DEA derived amides. It also offers better solubility, stability in hard water and lower foam. veja menos | |
| PEL-AMID™ SD | Ele Corporation | PEL-AMID™ SD is a high molecular weight oil soluble alkanolamide. It can form water in oil emulsions and can be used as a corrosion inhibitor. In personal care applications PEL-AMID™ SD provides good viscosity performance. In most formulations, this produ...veja mais PEL-AMID™ SD is a high molecular weight oil soluble alkanolamide. It can form water in oil emulsions and can be used as a corrosion inhibitor. In personal care applications PEL-AMID™ SD provides good viscosity performance. In most formulations, this product provides a modest amount of conditioning as well as imparting the desirable lubricating feel of soap. PEL-AMID™ SD has a low free diethanolamine content that meets the requirements of the European directive relating to residual diethanolamine in alkanolamides used in personal care products. veja menos | |
| PEL-AMID™ TD-1.7 | Ele Corporation | PEL-AMID™ TD-1.7 is a naturally-derived alkanolamide emulsifier which provides excellent water in oil emulsions. It is also water dispersible and provides good boundary lubrication and rust inhibition in water based cutting and grinding fluids. | |
| PEL-AMID™ TD-1.8 | Ele Corporation | PEL-AMID™ TD-1.8 is a naturally-derived alkanolamide emulsifier, which provides excellent water in oil emulsions. It is also water dispersible and when blended with anionic surfactants, provides excellent viscosity building properties at very low concentr...veja mais PEL-AMID™ TD-1.8 is a naturally-derived alkanolamide emulsifier, which provides excellent water in oil emulsions. It is also water dispersible and when blended with anionic surfactants, provides excellent viscosity building properties at very low concentrations. This product offers excellent lubrication and ferrous corrosion inhibition properties. veja menos | |
| PEL-AMID™ TD-2.0 | Ele Corporation | PEL-AMID™ TD-2.0 is a naturally-derived 2:1 diethanolamide from tall oil. The excess diethanolamine provides rust protection while the main alkanolamide component is an excellent lubricant and co-emulsifier that is non-staining on aluminum, steel and copp...veja mais PEL-AMID™ TD-2.0 is a naturally-derived 2:1 diethanolamide from tall oil. The excess diethanolamine provides rust protection while the main alkanolamide component is an excellent lubricant and co-emulsifier that is non-staining on aluminum, steel and copper. veja menos | |
| PEL-AMID™ TD-2.5 | Ele Corporation | PEL-AMID™ TD-2.5 is a tall oil diethanolamide. It is a naturally-derived alkanolamide emulsifier with lubrication and ferrous corrosion inhibition properties. | |
| PEL-AMID™ TD-2.6 | Ele Corporation | PEL-AMID™ TD-2.6 is soluble in most mineral oils and is dispersible in water. It is used as a corrosion inhibitor for water miscible metal working fluids and also for oil based corrosion prevention oils. The corrosion protection afforded by an aqueous bas...veja mais PEL-AMID™ TD-2.6 is soluble in most mineral oils and is dispersible in water. It is used as a corrosion inhibitor for water miscible metal working fluids and also for oil based corrosion prevention oils. The corrosion protection afforded by an aqueous based formulation can be adjusted by raising or lowering the amount of PEL-AMID™ TD-2.6 present. veja menos | |
| PEL-AMID™ TDP-1.0 | Ele Corporation | PEL-AMID™ TDP-1.0 is a tall oil diisopropanolamide. It is a DEA-free, naturally-derived alkanolamide emulsifier with lubrication and ferrous corrosion inhibition properties. | |
| PEL-AMID™ TDP-1.2 | Ele Corporation | PEL-AMID™ TDP-1.2 is an alkanolamide derived from diisopropanolamine and tall oil fatty acid. It exhibits better solubility and better lubrication properties than conventional diethanolamides. In addition, PEL-AMID™ TDP-1.2 provides superior corrosion inh...veja mais PEL-AMID™ TDP-1.2 is an alkanolamide derived from diisopropanolamine and tall oil fatty acid. It exhibits better solubility and better lubrication properties than conventional diethanolamides. In addition, PEL-AMID™ TDP-1.2 provides superior corrosion inhibition and reserve alkalinity than diethanolamine derived amides. It is oil soluble, water dispersible and a good choice for a primary or secondary emulsifier. veja menos | |
| PEL-AMID™ TDP-1.7 | Ele Corporation | PEL-AMID™ TDP-1.7 is a tall oil diisopropanolamide. It is a DEA-free, naturally-derived alkanolamide emulsifier with lubrication and ferrous corrosion inhibition properties. | |
| PEL-AMPH™ ODP | Ele Corporation | PEL-AMPH™ ODP is a 50% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte. PEL-AMPH™ ODP is a low foamer that provid...veja mais PEL-AMPH™ ODP is a 50% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte. PEL-AMPH™ ODP is a low foamer that provides good detergency in systems that require high cloud points. It is stable in both highly acid and alkaline systems offering utility in acid cleaners and heavily built detergents. veja menos | |
| PEL-AMPH™ ODP-45M | Ele Corporation | PEL-AMPH™ ODP-45M is a 45% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte PEL-AMPH™ ODP-45M is a low foamer that...veja mais PEL-AMPH™ ODP-45M is a 45% active aqueous solution of a low molecular weight amphoteric surfactant. It acts as an effective hydrotrope to couple nonionic surfactants into systems containing high levels of electrolyte PEL-AMPH™ ODP-45M is a low foamer that provides good detergency in systems that require high cloud points. PEL-AMPH™ ODP-45M is readily biodegradable and is globally accepted. veja menos | |
| PEL-EST™ 1095 | Ele Corporation | PEL-EST™ 1095 is a water-soluble lubricant additive for synthetic ferrous and nonferrous drawing and forming compounds. It is used in synthetics and semi-synthetics. Synthetic drawing fluids utilizing PEL-EST™ 1095 can replace the traditional oil soluble ...veja mais PEL-EST™ 1095 is a water-soluble lubricant additive for synthetic ferrous and nonferrous drawing and forming compounds. It is used in synthetics and semi-synthetics. Synthetic drawing fluids utilizing PEL-EST™ 1095 can replace the traditional oil soluble fluids without sacrificing performance; resulting in cleaner operations and oil-free parts. veja menos | |
| PEL-EST™ 6000-MO | Ele Corporation | PEL-EST™ 6000-MO is a high HLB, water-soluble emulsifier and die-cast lubricant. It is relatively nontoxic and readily biodegradable. It finds use in agricultural formulations and metal working fluids. | |
| PEL-EST™ 770 | Ele Corporation | PEL-EST™ 770 is a slightly polar branched diester that assists solubility or dispersion of other less compatible components in aliphatic oils. It is particularly useful for the formulation of essentially anhydrous metal working fluids and lubricating oils...veja mais PEL-EST™ 770 is a slightly polar branched diester that assists solubility or dispersion of other less compatible components in aliphatic oils. It is particularly useful for the formulation of essentially anhydrous metal working fluids and lubricating oils. veja menos | |
| PEL-EST™ 917 | Ele Corporation | PEL-EST™ 917 is a water dispersible surfactant and emulsifier. It functions as an oil in water emulsifier for a host of industrial and personal care applications. The approximate HLB of PEL-EST™ 917 is 9 and produces a very modest amount of foam. | |
| PEL-EST™ CO-20P | Ele Corporation | PEL-EST™ CO-20P is propoxylated castor oil. It is a non-silicone, water-dispersable defoamer and boundary lubricant. | |
| PEL-EST™ DT-600 | Ele Corporation | PEL-EST™ DT-600 is a tall oil diester of polyethylene glycol. It is a water-dispersible functional liquid with good lubrication and co-emulsification properties. This product is used in semi-synthetic and soluble oil C&G fluids. | |
| PEL-EST™ HCO-16 | Ele Corporation | PEL-EST™ HCO-16 is castor oil, hydrogenated and ethoxylated. It is a water-dispersible co-emulsifier and lubricant used in drawing and stamping fluids. | |
| PEL-EST™ TO-3 | Ele Corporation | PEL-EST™ TO-3 is an effective water-dispersible co-emulsifier and lubricant used in drawing and stamping fluids. It can be dissolved in mineral oil to make a self-emulsifying preparation. | |
| PEL-HIB™ 1034 | Ele Corporation | PEL-HIB™ 1034 is a boron based additive with low reserve alkalinity allowing easy incorporation into DEA free formulations and providing superior ferrous corrosion protection with reduced staining on non-ferrous materials. This product also works synergis...veja mais PEL-HIB™ 1034 is a boron based additive with low reserve alkalinity allowing easy incorporation into DEA free formulations and providing superior ferrous corrosion protection with reduced staining on non-ferrous materials. This product also works synergistically with other rust inhibitors. It has a low propensity to foam, is hard water stable and does not form residues. veja menos | |
| PEL-HIB™ 1054 | Ele Corporation | PEL-HIB™ 1054 is a liquid blend of the solid tolytriazole dissolved in the polar solvents propylene glycol. This product provides the handling ease of a liquid without the formation of an alkaline salt. PEL-HIB™ 1054 is used in inks, lubricants, compresso...veja mais PEL-HIB™ 1054 is a liquid blend of the solid tolytriazole dissolved in the polar solvents propylene glycol. This product provides the handling ease of a liquid without the formation of an alkaline salt. PEL-HIB™ 1054 is used in inks, lubricants, compressor fluids, flooring, direct treatment of copper, transmission fluids and paints for the protection of yellow metal parts and surfaces. veja menos | |
| PEL-HIB™ 1159 | Ele Corporation | PEL-HIB™ 1159 has been specifically designed to provide excellent rust inhibition for greases. This ashless rust inhibitor is compatible with lithium soaps and other components such as zinc dialkylditiiophosphate. | |
| PEL-HIB™ 372-B | Ele Corporation | PEL-HIB™ 372-B is a rust inhibitor designed for the protection of iron and steel and is soluble in water and glycol based fluids. It is not recommended for brass or aluminum. PEL-HIB™ 372-B is useful in metal working fluids and coolants, cooling water and...veja mais PEL-HIB™ 372-B is a rust inhibitor designed for the protection of iron and steel and is soluble in water and glycol based fluids. It is not recommended for brass or aluminum. PEL-HIB™ 372-B is useful in metal working fluids and coolants, cooling water and boiler operations as well as hydraulic fluids. Formulations utilizing PEL-HIB™ 372-B are more resistant to microbial attack. veja menos | |
| PEL-HIB™ 543-B | Ele Corporation | PEL-HIB™ 543-B corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust inhibition ...veja mais PEL-HIB™ 543-B corrosion inhibitor is an amine borate ester suitable for use with aluminum and steel. Originally introduced as an alternative to nitrites, it affords the same level of protection to ferrous materials. It provides excellent rust inhibition and aids lubrication in metal cutting fluids. PEL-HIB™ 543-B gives a nontacky protective film to the work piece and is very water soluble. Because it is amine based, it is not appropriate for use on copper, brass or other copper alloys. veja menos | |
| PEL-HIB™ 691 | Ele Corporation | PEL-HIB™ 691 is composed of a proprietary blend of ingredients for rust inhibition. It is a water-soluble boundary lubricant with ferrous corrosion inhibitor properties. | |
| PEL-HIB™ 869 | Ele Corporation | PEL-HIB™ 869 is an extremely effective rust inhibitor in soft water and in formulations made with soft water. It has a low propensity to foam and it is relatively mild to the skin. As a mixture of triethanolamine salts of carboxylic acids, it will form in...veja mais PEL-HIB™ 869 is an extremely effective rust inhibitor in soft water and in formulations made with soft water. It has a low propensity to foam and it is relatively mild to the skin. As a mixture of triethanolamine salts of carboxylic acids, it will form insoluble calcium and magnesium soaps in hard water. veja menos | |
| PEL-HIB™ 901 | Ele Corporation | PEL-HIB™ 901 is a low foaming blend of diethanolamine salt of dodecandioic acid and an EP phosphate ester. It is an effective corrosion inhibitor for ferrous metals while providing extreme pressure lubrication as well. | |
| PEL-INE™ 257 | Ele Corporation | PEL-INE™ 257 is a useful alkalizing tertiary alkanolamine with a low molecular weight and a low melting point. It is very water soluble. This product is used as a replacement for triethanolamine and triisopropanolamine in many applications. | |
| PEL-INE™ 410 | Ele Corporation | PEL-INE™ 410 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatib...veja mais PEL-INE™ 410 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatible with strong acid or alkali systems. Further, it is an improvement over older types of amphoterics. veja menos | |
| PEL-INE™ 466 | Ele Corporation | PEL-INE™ 466 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatib...veja mais PEL-INE™ 466 is a lubricious surface active agent that finds use in vibratory metal finishing. It is a unique amphoteric detergent or surface-active agent. It acts as an anion or cation depending on the pH of the system in which it is used. It is compatible with strong acid or alkali systems. Further, it is an improvement over older types of amphoterics. It is more water-soluble, has no pronounced isoelectric point (inactivity in a certain pH range) and will tolerate greater amounts of alkali or acid. veja menos | |
| PEL-INE™ 618 | Ele Corporation | PEL-INE™ 618 is a low volatility neutralizing amine for metal working applications. It provides alkalinity to metal working formulations and acts as a corrosion inhibitor. It is liquid, biodegradable, 100% active and nearly odorless. PEL-INE™ 618 is also ...veja mais PEL-INE™ 618 is a low volatility neutralizing amine for metal working applications. It provides alkalinity to metal working formulations and acts as a corrosion inhibitor. It is liquid, biodegradable, 100% active and nearly odorless. PEL-INE™ 618 is also useful as a catalyst for both epoxy and urethane systems. veja menos | |
| PEL-INE™ 883 | Ele Corporation | PEL-INE™ 883 is composed of octyldiethanolamine. This octylamine-based pH adjustor has odor control and ferrous corrosion inhibition properties. | |
| PEL-INE™ CAM-15 | Ele Corporation | PEL-INE™ CAM-15 is a tertiary amine ethoxylate, based on a primary coco amine with fifteen moles of ethylene oxide added. It is an excellent co-emulsifier, with some wetting and ferrous corrosion inhibition properties. This product is often used in cleane...veja mais PEL-INE™ CAM-15 is a tertiary amine ethoxylate, based on a primary coco amine with fifteen moles of ethylene oxide added. It is an excellent co-emulsifier, with some wetting and ferrous corrosion inhibition properties. This product is often used in cleaners. veja menos | |
| PEL-INE™ RW-20 | Ele Corporation | PEL-INE™ RW-20 is an oil soluble emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is insoluble in water but is dispersible in dilute aqueous solutions of acid. PEL-INE™ RW-20 finds use in metal...veja mais PEL-INE™ RW-20 is an oil soluble emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is insoluble in water but is dispersible in dilute aqueous solutions of acid. PEL-INE™ RW-20 finds use in metal working fluids due to its emulsifying power and reserve alkalinity. It is also useful in solvent based degreasers for metal cleaning. veja menos | |
| PEL-INE™ RW-50 | Ele Corporation | PEL-INE™ RW-50 is a nonionic, water-dispersible emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is only dispersible in in water but is soluble in dilute aqueous solutions of acid. It is also s...veja mais PEL-INE™ RW-50 is a nonionic, water-dispersible emulsifier. It offers the formulator the ability to reverse emulsions formed with it by controlling the pH. It is only dispersible in in water but is soluble in dilute aqueous solutions of acid. It is also soluble in a variety of organic solvents. PEL-INE™ RW-50 finds use in metal working fluids due its emulsifying power and reserve alkalinity. It is also useful in solvent based degreasers for metal cleaning. veja menos | |
| PEL-INE™ TAM-5 | Ele Corporation | PEL-INE™ TAM-5 is a cationic surfactant derived from tallow amine. It is useful as an emulsifier, dispersant and wetting agent. It is readily biodegradable. This product is also used in textile processing applications. | |
| PEL-LOK™ L61 | Ele Corporation | PEL-LOK™ L61 is a block polymer consisting of a modest amount of polyethylene glycol reacted with a larger polypropylene glycol polymer, giving it a lower HLB. This polymer has terminal primary hydroxyl groups. It is used as a defoamer, emulsifier, disper...veja mais PEL-LOK™ L61 is a block polymer consisting of a modest amount of polyethylene glycol reacted with a larger polypropylene glycol polymer, giving it a lower HLB. This polymer has terminal primary hydroxyl groups. It is used as a defoamer, emulsifier, dispersant, stabilizer, wetting agent and boundry lubricant for metalworking fluids, cosmetics, paper, textiles, dishwashing detergents, rinse aids and lubricant bases. veja menos | |
| PEL-LOK™ L64 | Ele Corporation | PEL-LOK™ L64 is Elé’s brand of Poloxamer 184. It is a normal, as opposed to reverse, EO/PO block copolymer surfactant with terminal primary hydroxyl groups. It is 100% active, has a molecular weight of approximately 2900 Daltons and is relatively nontoxic...veja mais PEL-LOK™ L64 is Elé’s brand of Poloxamer 184. It is a normal, as opposed to reverse, EO/PO block copolymer surfactant with terminal primary hydroxyl groups. It is 100% active, has a molecular weight of approximately 2900 Daltons and is relatively nontoxic. PEL-LOK™ L64 is a liquid at typical ambient temperatures. It has a higher HLB and is soluble in water at room temperature. veja menos | |
| PEL-LUBE™ 120 | Ele Corporation | PEL-LUBE™ 120 is a water insoluble PAG-Phosphate ester blend. It is a water-dispersible extreme pressure agent used in cutting fluids with some ferrous and non-ferrous corrosion inhibition properties. | |
| PEL-LUBE™ 486-C | Ele Corporation | PEL-LUBE™ 486-C is a lubricity additive for water-based metalworking fluids which gives extreme pressure lubricity without the use of phosphorus, sulfur, chlorine or fatty acid compounds. PEL-LUBE 486-C is stable under a variety of conditions, including v...veja mais PEL-LUBE™ 486-C is a lubricity additive for water-based metalworking fluids which gives extreme pressure lubricity without the use of phosphorus, sulfur, chlorine or fatty acid compounds. PEL-LUBE 486-C is stable under a variety of conditions, including very hard water, and does not foam. It should be neutralized 50:50 with MEA, DEA or TEA prior to formulating. veja menos | |
| PEL-LUBE™ 510 | Ele Corporation | PEL-LUBE™ 510 is a blend of a water soluble polyalkylene glycol (PAG) and an extreme pressure lubricant (EP) with hydrotrope properties. At the temperatures generated by cutting metal, the PAG’s solubility is reduced and it forms a thin film on the metal ...veja mais PEL-LUBE™ 510 is a blend of a water soluble polyalkylene glycol (PAG) and an extreme pressure lubricant (EP) with hydrotrope properties. At the temperatures generated by cutting metal, the PAG’s solubility is reduced and it forms a thin film on the metal part. At the same time, the EP lube serves to protect the metal by reacting with the surface, generating plate-like structures that lubricate in a fashion similar to graphite. veja menos | |
| PEL-LUBE™ 562 | Ele Corporation | PEL-LUBE™ 562 is a lubricant and antiwear agent for metalworking fluids, straight oils, sol. oils, and semisynthetic fluids. It provides boundary lubrication for metal removal and metal forming. In addition, it yields some corrosion resistance for ferrous...veja mais PEL-LUBE™ 562 is a lubricant and antiwear agent for metalworking fluids, straight oils, sol. oils, and semisynthetic fluids. It provides boundary lubrication for metal removal and metal forming. In addition, it yields some corrosion resistance for ferrous and nonferrous metals. Additionally, it is an emulsifier for aqueous formulations. veja menos | |
| PEL-LUBE™ 591 | Ele Corporation | PEL-LUBE™ 591 metalworking lubricant is a polyalkylene glycol formulated with an EP phosphate ester. It provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ 591 is completely water soluble at ambient temperatures. At elevated temperature...veja mais PEL-LUBE™ 591 metalworking lubricant is a polyalkylene glycol formulated with an EP phosphate ester. It provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ 591 is completely water soluble at ambient temperatures. At elevated temperatures it exhibits inverse solubility and is thus able to provide excellent lubricity at low aqueous concentrations. When PEL-LUBE™ 591 is compounded with alkanolamines, corrosion inhibitors, and biocides, synthetic coolants of exceptional performance and versatility can be produced. It is hydrolytically stable and resists microbial attack. veja menos | |
| PEL-LUBE™ 593 | Ele Corporation | PEL-LUBE™ 593 is an emulsifier specifically designed for semi-synthetic metalworking fluids. It provides boundary lubrication and is stable in a variety of conditions, including in very hard water. PEL-LUBE™ 593 is not a formulated product. Formulations u...veja mais PEL-LUBE™ 593 is an emulsifier specifically designed for semi-synthetic metalworking fluids. It provides boundary lubrication and is stable in a variety of conditions, including in very hard water. PEL-LUBE™ 593 is not a formulated product. Formulations utilizing it ought to be fortified with corrosion inhibitors and other additives to get optimum performance. veja menos | |
| PEL-LUBE™ EPML-483 | Ele Corporation | PEL-LUBE™ EPML-483 metalworking lubricant is an anionic modified polyalkylene glycol which provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ EPML-483 is completely water soluble at ambient temperatures. At elevated temperatures it exh...veja mais PEL-LUBE™ EPML-483 metalworking lubricant is an anionic modified polyalkylene glycol which provides both hydrodynamic and extreme pressure lubrication. PEL-LUBE™ EPML-483 is completely water soluble at ambient temperatures. At elevated temperatures it exhibits inverse solubility and is thus able to provide excellent lubricity at low concentrations in water. veja menos | |
| PEL-LUBE™ EPML-X | Ele Corporation | PEL-LUBE™ EPML-X is a mixture of alkanolamine and anionic polymers. It is a water-soluble, low-foaming lubricant which provides hydrodynamic extreme pressure lubrication and ferrous corrosion inhibition properties. | |
| PEL-PAG™ 967 | Ele Corporation | PEL-PAG™ 967 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 150 cSt at 37.8° C. | |
| PEL-PAG™ 968 | Ele Corporation | PEL-PAG™ 968 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 220 cSt at 37.8° C. | |
| PEL-PAG™ WI-1145 | Ele Corporation | PEL-PAG™ WI-1145 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for ...veja mais PEL-PAG™ WI-1145 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 1087-1203 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-135 | Ele Corporation | PEL-PAG™ WI-135 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...veja mais PEL-PAG™ WI-135 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 128-142 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-165 | Ele Corporation | PEL-PAG™ WI-165 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...veja mais PEL-PAG™ WI-165 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 156-174 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-1715 | Ele Corporation | PEL-PAG™ WI-1715 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for ...veja mais PEL-PAG™ WI-1715 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 1629-1801 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-200 | Ele Corporation | PEL-PAG™ WI-200 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...veja mais PEL-PAG™ WI-200 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 180-220 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-250 | Ele Corporation | PEL-PAG™ WI-250 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...veja mais PEL-PAG™ WI-250 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 237-263 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-285 | Ele Corporation | PEL-PAG™ WI-285 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...veja mais PEL-PAG™ WI-285 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 270-300 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-525 | Ele Corporation | PEL-PAG™ WI-525 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...veja mais PEL-PAG™ WI-525 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 498-552 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-625 | Ele Corporation | PEL-PAG™ WI-625 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for t...veja mais PEL-PAG™ WI-625 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 595-655 at 100° F, SUS. veja menos | |
| PEL-PAG™ WI-65 | Ele Corporation | PEL-PAG™ WI-65 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for te...veja mais PEL-PAG™ WI-65 is an oil-soluble lubricant useful in engine lubricant additives, rubbers, greases, metal cutting fluids and many other applications. It is an effective defoamer for industrial applications. This product is also a nonvolatile solvent for textile dying operations and other applications including plasticizer for coatings, demulsifier, and cosmetic emollient. This product has a viscosity of 61-69 at 100° F, SUS. veja menos | |
| PEL-PAG™ WS-1281 | Ele Corporation | PEL-PAG™ WS-1281 is a medium viscosity, water-soluble synthetic lubricant. Aqueous solutions of PEL-PAG™ 1076 are lower-foaming than most other water soluble PAGs. It is 100% active with no diluents, hydrolytically stable and hard water stable. This produ...veja mais PEL-PAG™ WS-1281 is a medium viscosity, water-soluble synthetic lubricant. Aqueous solutions of PEL-PAG™ 1076 are lower-foaming than most other water soluble PAGs. It is 100% active with no diluents, hydrolytically stable and hard water stable. This product is non-staining to brass, copper and aluminum. PEL-PAG™ WS-1281 is useful as a lubricity additive in the formulation of synthetic coolants used in low temperature metal working operations such as can-drawing, stamping and cold rolling. It may be formulated with anionic EP additives such as carboxylates and phosphate esters. veja menos | |
| PEL-PAG™ WS-2000 | Ele Corporation | PEL-PAG™ WS-2000 is butanol, ethoxylated and propoxylated. It is a water-soluble functional fluid. This product has a viscosity of 432 cSt at 37.8° C. | |
| PEL-PAG™ WS-423 | Ele Corporation | PEL-PAG™ WS-423 is a functional fluid designed with a low cloud point. It is used as a food grade defoamer for the extraction and processing of sucrose from sugar beets. This product is a water-soluble, non-silicone defoamer and boundary lubricant with a ...veja mais PEL-PAG™ WS-423 is a functional fluid designed with a low cloud point. It is used as a food grade defoamer for the extraction and processing of sucrose from sugar beets. This product is a water-soluble, non-silicone defoamer and boundary lubricant with a cloud point of 20˚C. veja menos | |
| PEL-PAG™ WS-450 | Ele Corporation | PEL-PAG™ WS-450 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 98 cSt at 37.8° C. | |
| PEL-PAG™ WS-5100 | Ele Corporation | PEL-PAG™ WS-5100 is a water-soluble polyalkylene glycol that is 100% active. It is useful in personal care products, metalworking fluids, hydraulic fluids and lubricants. This product can be formulated with water and additives to obtain effective fluids f...veja mais PEL-PAG™ WS-5100 is a water-soluble polyalkylene glycol that is 100% active. It is useful in personal care products, metalworking fluids, hydraulic fluids and lubricants. This product can be formulated with water and additives to obtain effective fluids for a variety of metalworking operations, cutting, drawing, stamping rolling and more. PEL-PAG™ WS-5100 can be used neat as hydraulic fluids for boundary lubrication and low temperature applications or formulated with water and additives for corrosion and wear protection. When properly formulated, PEL-PAG™ WS-5100 is useful in hair grooming products and shampoos, it is an excellent high temperature, compressor gear, textile fiber, mill and calendar lubricant. veja menos | |
| PEL-PAG™ WS-5300 | Ele Corporation | PEL-PAG™ WS-5300 is an ethylene oxide, propylene oxide copolymer. It is a water-soluble, low-foaming, hydrolytically stable and hard water stable functional fluid. This product has a viscosity of 1050 cSt at 37.8° C. | |
| PEL-PAG™ WS-55 | Ele Corporation | PEL-PAG™ WS-55 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is a useful, relatively nonvolatile solvent for many industrial applications. It also has lubricating properties. PEL-PAG™ WS-55 can be formulated with water an...veja mais PEL-PAG™ WS-55 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is a useful, relatively nonvolatile solvent for many industrial applications. It also has lubricating properties. PEL-PAG™ WS-55 can be formulated with water and additives to obtain effective formulations for a variety of purposes. veja menos | |
| PEL-PAG™ WS-660 | Ele Corporation | PEL-PAG™ WS-660 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is useful in metalworking fluids, hydraulic fluids and lubricants. This product is 100% active with no diluents; it can be formulated with water and additives ...veja mais PEL-PAG™ WS-660 is a water-soluble polyalkylene glycol that is 100% active with no diluents. It is useful in metalworking fluids, hydraulic fluids and lubricants. This product is 100% active with no diluents; it can be formulated with water and additives to obtain effective fluids for a variety of metalworking operations, cutting, drawing, stamping rolling and more. PEL-PAG™ WS-660 can be used neat as hydraulic fluids for boundary lubrication and low temperature applications or formulated with water and additives for corrosion and wear protection. When properly formulated, PEL-PAG™ WS-660 is an excellent high temperature, compressor gear, rubber, textile fiber, mill and calendar lubricant. veja menos | |
| PEL-PAG™ WS-9500 | Ele Corporation | PEL-PAG™ WS-9500 is a water-soluble polyalkylene glycol that is 100% active with no diluents. This polymer has two terminal hydroxyls and is an adduct consisting of a random mixture of 75% ethylene oxide and 25% propylene oxide. It is useful in personal c...veja mais PEL-PAG™ WS-9500 is a water-soluble polyalkylene glycol that is 100% active with no diluents. This polymer has two terminal hydroxyls and is an adduct consisting of a random mixture of 75% ethylene oxide and 25% propylene oxide. It is useful in personal care products, metalworking fluids, hydraulic fluids and lubricants. PEL-PAG™ WS-9500 can be formulated with water and additives to obtain effective fluids for a variety of metalworking operations, cutting, drawing, stamping rolling and more. PEL-PAG™ WS-9500 can be used neat as hydraulic fluids for boundary lubrication and low temperature applications or formulated with water and additives for corrosion and wear protection. When properly formulated, PEL-PAG™ WS-9500 is useful in hair grooming products, is an excellent high temperature, compressor gear, textile fiber, mill and calendar lubricant. veja menos | |
| PEL-PHEN™ 649 | Ele Corporation | PEL-PHEN™ 649 is ethoxylated meta- and para-cresol with 2 moles of ethylene oxide. It is useful for the production of phosphate ester surfactants and hydrotropes. | |
| PEL-PHEN™ 650 | Ele Corporation | PEL-PHEN™ 650 is a nonionic surfactant designed for use in the electroplating industry where it is used to formulate brightener additives. It is particularly effective as an auxiliary brightener in acid zinc electrolytes for increasing the throwing power ...veja mais PEL-PHEN™ 650 is a nonionic surfactant designed for use in the electroplating industry where it is used to formulate brightener additives. It is particularly effective as an auxiliary brightener in acid zinc electrolytes for increasing the throwing power and improving ductility. PEL-PHEN™ 650 is also be used to solubilize top brighteners. Typical use levels range from 2 to 6 grams per liter. veja menos | |
| PEL-PHOS™ 1009 | Ele Corporation | PEL-PHOS™ 1009 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHOS™...veja mais PEL-PHOS™ 1009 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHOS™ 1009 is biodegradable with a low toxicity profile. veja menos | |
| PEL-PHOS™ 1049 | Ele Corporation | PEL-PHOS™ 1049 is a phosphate ester of ethoxylated isotridecyl alcohol. It is useful as an emulsifier for water based cutting fluids where it also exhibits some extreme pressure lubrication. Upon neutralization with alkali or amines, it is a useful emulsi...veja mais PEL-PHOS™ 1049 is a phosphate ester of ethoxylated isotridecyl alcohol. It is useful as an emulsifier for water based cutting fluids where it also exhibits some extreme pressure lubrication. Upon neutralization with alkali or amines, it is a useful emulsifier for emulsion polymerization. veja menos | |
| PEL-PHOS™ 444 | Ele Corporation | PEL-PHOS™ 444 is dinonylphenol, ethoxylated and phosphated. It is an EP agent used as a co-emulsifier for oil-based cutting fluids with some ferrous and non-ferrous corrosion inhibition properties. | |
| PEL-PHOS™ 583 | Ele Corporation | PEL-PHOS™ 583 is a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is ...veja mais PEL-PHOS™ 583 is a water soluble phosphate ester that exhibits both hydrotrope and detergent properties. It is an ideal ingredient for coupling nonionics into moderately built, alkaline detergent systems. It finds particular use for metal cleaning. It is compatible with the typical builders used including pyrophosphates, silicates, and carbonates. veja menos | |
| PEL-PHOS™ 884 | Ele Corporation | PEL-PHOS™ 884 is an oil soluble phosphate ester in the acid form and an extreme pressure additive. Unneutralized, it is insoluble in water but upon neutralization with a water soluble amine, it becomes water soluble and acts as a co-emulsifier for oils an...veja mais PEL-PHOS™ 884 is an oil soluble phosphate ester in the acid form and an extreme pressure additive. Unneutralized, it is insoluble in water but upon neutralization with a water soluble amine, it becomes water soluble and acts as a co-emulsifier for oils and semisynthetic fluids. It is an excellent emulsifier for water-insoluble polyalkylene glycols. PEL-PHOS™ 884 can be used to make microemulsion metal working fluids that are totally synthetic and free from both petroleum and vegetable oils. veja menos | |
| PEL-PHOS™ 885-A | Ele Corporation | PEL-PHOS™ 885-A is a water soluble, phosphorous-containing, extreme pressure agent that will improve water-based metal working fluid lubrication. This product is provided in free acid form. It imparts enhanced lubricity to aqueous based metalworking fluid...veja mais PEL-PHOS™ 885-A is a water soluble, phosphorous-containing, extreme pressure agent that will improve water-based metal working fluid lubrication. This product is provided in free acid form. It imparts enhanced lubricity to aqueous based metalworking fluid formulations. PEL-PHOS 885 may be used as is or neutralized with a water soluble amine such as triethanolamine. veja menos | |
| PEL-PHOS™ H-66 | Ele Corporation | PEL-PHOS™ H-66 is an aqueous solution of the potassium salt of a high HLB phosphate ester. It functions as a hydrotrope to couple lower HLB surfactants into “built” formulations or aqueous solutions of electrolytes. As a phosphate ester salt, PEL-PHOS™ H-...veja mais PEL-PHOS™ H-66 is an aqueous solution of the potassium salt of a high HLB phosphate ester. It functions as a hydrotrope to couple lower HLB surfactants into “built” formulations or aqueous solutions of electrolytes. As a phosphate ester salt, PEL-PHOS™ H-66 is an anionic surfactant. veja menos | |
| PEL-PHOS™ LB-400 | Ele Corporation | PEL-PHOS™ LB-400 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHO...veja mais PEL-PHOS™ LB-400 is a lubricant, anti-wear additive, corrosion inhibitor, wetting agent, emulsifier, detergent and a dispersant for metal working formulations. It is useful in lubricating and rolling oils, hydraulic and water-based cutting fluids. PEL-PHOS™ LB-400 is both biodegradable and a non-ecotoxic surfactant. veja menos |
