| A-340 / S | Opalion | A-340 / S is a dispersion based on acrylic esters and vinyl autoreticulable. | |
| Acryline® DP | Isogama Industria Quimica Ltda. | Acryline® DP é um dispersante acrílico de alto desempenho. Acryline® DP es un produto utilizado como dispersante de cargas minerais como carbonato de cálcio, pigmentos, caulim entre outros produtos para a construção civil; na indústria de tintas como comp...veja mais Acryline® DP é um dispersante acrílico de alto desempenho. Acryline® DP es un produto utilizado como dispersante de cargas minerais como carbonato de cálcio, pigmentos, caulim entre outros produtos para a construção civil; na indústria de tintas como componente para linhas exteriores e interiores e na indústria de papel para aplicações superficiais. veja menos | |
| Acryline® DP EX | Isogama Industria Quimica Ltda. | Acryline® DP EX is a high performance acrylic dispersant. Acryline® DP EX is used as a dispersant for mineral fillers such as calcium carbonate, pigments, kaolin and other products for the construction industry, in the paint industry as a component in out...veja mais Acryline® DP EX is a high performance acrylic dispersant. Acryline® DP EX is used as a dispersant for mineral fillers such as calcium carbonate, pigments, kaolin and other products for the construction industry, in the paint industry as a component in outer and inner rows and paper industry for surface applications. veja menos | |
| Acryline® EA 300 | Isogama Industria Quimica Ltda. | Acryline® EA 300 um dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de alta reatividade (alta viscosidade) empregado na produção de massas e afins. O produto Acryline® EA 300 atribui propriedades como: a...veja mais Acryline® EA 300 um dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de alta reatividade (alta viscosidade) empregado na produção de massas e afins. O produto Acryline® EA 300 atribui propriedades como: alto poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH entre 8,5 – 9,5, aonde se pode observar maior poder de espessamento. veja menos | |
| Acryline® EA 300 EX | Isogama Industria Quimica Ltda. | El producto Acryline® EA 300 EX atribuí propiedades como: medio poder de espesamiento, excelente nivelamento, aplicabilidad y estabilidad. Utilización ideal na gama de pH entre 8,5 – 9,5 donde se observa mayor poder de espesamiento. El producto es compati...veja mais El producto Acryline® EA 300 EX atribuí propiedades como: medio poder de espesamiento, excelente nivelamento, aplicabilidad y estabilidad. Utilización ideal na gama de pH entre 8,5 – 9,5 donde se observa mayor poder de espesamiento. El producto es compatible con otros espessante acrílicos o celulósicos. veja menos | |
| Acryline® EM 33 | Isogama Industria Quimica Ltda. | Acryline® EM 33 dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de média reatividade (viscosidade) empregado na produção de tintas e afins. O produto Acryline® EM 33 atribui propriedades como: médio poder de...veja mais Acryline® EM 33 dispersão aquosa de copolímero acrílico carboxilado. Produto utilizado como espessante acrílico de média reatividade (viscosidade) empregado na produção de tintas e afins. O produto Acryline® EM 33 atribui propriedades como: médio poder de espessamento, excelente nivelamento, aplicabilidade e estabilidade. Utilização ideal na faixa de pH entre 8,5 – 9,5 onde se observa maior poder de espessamento. Ele é compatível com outros espessantes acrílicos ou celulósicos de mercado. veja menos | |
| Acryline® EM 33 EX | Isogama Industria Quimica Ltda. | El producto Acryline® EM 33 EX atribuí propiedades como: medio poder de espesamiento, excelente nivelamento, aplicabilidad y estabilidad. Utilización ideal na gama de pH entre 8,5 – 9,5 donde se observa mayor poder de espesamiento. El producto es compatib...veja mais El producto Acryline® EM 33 EX atribuí propiedades como: medio poder de espesamiento, excelente nivelamento, aplicabilidad y estabilidad. Utilización ideal na gama de pH entre 8,5 – 9,5 donde se observa mayor poder de espesamiento. El producto es compatible con otros espessante acrílicos o celulósicos. veja menos | |
| Acryline® RA S 50 G3 | Isogama Industria Quimica Ltda. | Acryline® RA S 50 G3 emulsão aquosa de copolímero com base acrílica estireno e compostos de silano. O produto Acryline® RA S 50 G3 atribui propriedades como: filme de excelente plasticidade, brilho, poder adesivo e elevada resistência à água. Apresenta bo...veja mais Acryline® RA S 50 G3 emulsão aquosa de copolímero com base acrílica estireno e compostos de silano. O produto Acryline® RA S 50 G3 atribui propriedades como: filme de excelente plasticidade, brilho, poder adesivo e elevada resistência à água. Apresenta boa compatibilidade com a maioria das cargas usualmente empregadas. Por ser uma resina silanizada já encontramos em algumas formulações de tintas com resultados de até 50 % melhores em lavabilidade contra gerações anteriores das resinas (não silanizadas). veja menos | |
| Acryline® RA S 50 G3 EX | Isogama Industria Quimica Ltda. | Acryline® RA S 50 G3 EX es un emulsión acuosa con base de copolímero acrílico estireno. El producto Acryline® RA S 50 G3 EX asigna propiedades como la excelente plasticidad de película, el brillo, el poder adhesivo y alta resistencia al agua. | |
| Akuabrid CRA 1610 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...veja mais Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Akuabrid PH 1200 | T&L Co., Ltd. Polymer Technology Centre | Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...veja mais Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. veja menos | |
| Bayhydrol® HD 2016 | Covestro | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...veja mais Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. veja menos | |
| Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| BYD2600 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...veja mais BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. veja menos | |
| BYD3102 | Tianyi Chemical Engineering Material Co., Ltd. | BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. | |
| CN104A75 | Sartomer Americas | CN104A75 é um acrilato epóxi bifuncional a base de bisfenol A misturado com 25% SR306, diacrilato glicol tripropileno. Ele proporciona um bom equilíbrio de propriedades da água e alta reatividade. O oligômero básico, CN104, oferece a menor cor dos acrilat...veja mais CN104A75 é um acrilato epóxi bifuncional a base de bisfenol A misturado com 25% SR306, diacrilato glicol tripropileno. Ele proporciona um bom equilíbrio de propriedades da água e alta reatividade. O oligômero básico, CN104, oferece a menor cor dos acrilatos de epóxi com base bisfenol-A da Sartomer. As aplicações sugeridas incluem adesivos, revestimentos, eletrônicos e tintas. veja menos | |
| CN120Z | Sartomer Americas | CN120Z é um acrilato epóxi bisfenol A bifuncional . Ele proporciona um bom equilíbrio de propriedades da água e alta reatividade. CN120Z oferece a menor viscosidade dos acrilatos de epóxi com base em bisfenol A da Sartomer. As aplicações sugeridas incluem...veja mais CN120Z é um acrilato epóxi bisfenol A bifuncional . Ele proporciona um bom equilíbrio de propriedades da água e alta reatividade. CN120Z oferece a menor viscosidade dos acrilatos de epóxi com base em bisfenol A da Sartomer. As aplicações sugeridas incluem adesivos, anaeróbios, aglutinantes, adesivos sensíveis à pressão e estruturais. Também é recomendado para revestimentos de piso, metal, papel e plástico, eletrônicos, tintas de impressão, flexografia, gravura e tintas de offset. veja menos | |
| CN307 | Sartomer Americas | O CN307 é baseado no alto polibutadieno de vinil e pode ser incorporados em peróxido curado natural e borrachas sintéticas, em sistemas mecânicos e propriedades de desempenho. | |
| CN9021 | Sartomer Americas | O CN9021 é um éster acrílico líquido claro. Este produto foi desenvolvido para adesivos laminados de cura a UV/EB e adesivos sensíveis a pressão. O CN9021 tem boa resistência à umidade e alto alongamento. Ele também produto confere excelente aderência e f...veja mais O CN9021 é um éster acrílico líquido claro. Este produto foi desenvolvido para adesivos laminados de cura a UV/EB e adesivos sensíveis a pressão. O CN9021 tem boa resistência à umidade e alto alongamento. Ele também produto confere excelente aderência e flexibilidade, para formulações de laminação e adesivos sensíveis à pressão especialmente para vidro. veja menos | |
| CN9070 | Sartomer Americas | CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg...veja mais CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg, low crosslink density, and will be flexible. veja menos | |
| CN9071 | Sartomer Americas | CN9071 is a tin-free aliphatic urethane acrylate oligomer. It offers high clarity and non-yellowing. Upon crosslinking, CN9071 has low Tg, low crosslink density and high elongation. It also offers excellent adhesion to a variety of substrates, such as gla...veja mais CN9071 is a tin-free aliphatic urethane acrylate oligomer. It offers high clarity and non-yellowing. Upon crosslinking, CN9071 has low Tg, low crosslink density and high elongation. It also offers excellent adhesion to a variety of substrates, such as glass, PET, metals or polypropylene. veja menos | |
| CN9302 | Sartomer Americas | CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture c...veja mais CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture cure of shadowed areas for enhanced coating performance. veja menos | |
| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...veja mais DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. veja menos | Request Sample |
| DEGACRYL® HS 4174 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing alum...veja mais DEGACRYL® HS 4174 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4174 E achieves direct adhesion on aluminium and PET. Usage as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). veja menos | Request Sample |
| DEGACRYL® HS 4240 D | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion ...veja mais DEGACRYL® HS 4240 D is an aqueous emulsion of a thermoplastic, pure acrylic resin. Major application is binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4240 D achieves direct adhesion to aluminum, no primer is required. veja menos | Request Sample |
| DEGACRYL® HS 4792 L | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applicati...veja mais DEGACRYL® HS 4792 L is an organic solution based on ethyl methacrylate. It is suitable as a heat seal binder for sealing aluminium foil versus polystyrene (PS), vinyl (PVC) or polyvinylidene chloride (PVdC). DEGACRYL® HS 4792 L is tailormade for applications where low temperature sealing and easy peel behavior are required. In formulations with PVC copolymer DEGACRYL® HS 4792 L will achieve good adhesion to aluminium. veja menos | Request Sample |
| DESMODUR® RC | Covestro | Uma solução de poliisocianurato de tolueno diisocianato (TDI) em acetato de etil. É adequado para adesivos de vinculação cruzada, baseados em Desmocoll, borracha natural ou sintética, adesivos com cor especialmente clara, usados para materiais de borracha...veja mais Uma solução de poliisocianurato de tolueno diisocianato (TDI) em acetato de etil. É adequado para adesivos de vinculação cruzada, baseados em Desmocoll, borracha natural ou sintética, adesivos com cor especialmente clara, usados para materiais de borracha de ligação. veja menos | |
| DESMODUR® VKS 10 | Covestro | Uma mistura de 4,4’-diisocianato difenilmetano (MDI) com isômeros e homólogos funcionais mais altos (PMDI), que é adequado para a combinação com Baycoll na formulação de adesivos. | |
| Dispersion Acrilica A-5000 F1 E | Opalion | Dispersion Acrilica A-5000 F1 E is an acrylic copolymer in aqueous dispersion developed for ecological sensitive adhesives. | |
| Dispersion EA – 419 F2 | Opalion | Dispersion EA – 419 F2 is a new low styrene acrylic dispersion particle size and high crosslinking at low temperatures, which gives it greater physical strength and chemistry. It is applicable in formulations of floor wax water, it's film imparts to the f...veja mais Dispersion EA – 419 F2 is a new low styrene acrylic dispersion particle size and high crosslinking at low temperatures, which gives it greater physical strength and chemistry. It is applicable in formulations of floor wax water, it's film imparts to the formulations with unparalleled gloss, hardness, adhesion and resistance to agents cleaners. veja menos | |
| Dispersion EA – 595 F1 | Opalion | Dispersion EA – 595 F1 is a styrenated acrylic copolymer having a flexible film without diminishing the resistance values as those for the preparation of high quality paints. This product is for use in inner and outer paints, textured finishes and low bod...veja mais Dispersion EA – 595 F1 is a styrenated acrylic copolymer having a flexible film without diminishing the resistance values as those for the preparation of high quality paints. This product is for use in inner and outer paints, textured finishes and low body automotive paints. veja menos | |
| Dispersion EA - 740 | Opalion | Dispersion EA - 740 is a dispersion of acrylic polymers developed for high gloss vehicle aqueous coatings and inks for flexo and rotogravure. It can be used as a basis for overprint varnishes. | |
| Dispersion EA-890 | Opalion | Dispersion EA-890 is a dispersion of a styrenated acrylic copolymer developed as ink vehicle. It is distinguished by its hardness and high brightness. | |
| Dispersion Elastomerica Coloidal DZ 1 | Opalion | Dispersion Elastomerica Coloidal DZ 1 has a breakthrough with an elastic film and very low tack residual. The formulations of acrylic polymer films have been limited by the very technology inherent basic monomers for free elastic films stickiness. This pr...veja mais Dispersion Elastomerica Coloidal DZ 1 has a breakthrough with an elastic film and very low tack residual. The formulations of acrylic polymer films have been limited by the very technology inherent basic monomers for free elastic films stickiness. This product has applications in varnishes, woods, varnishes for bricks and does not cause oxidation on metals. veja menos | |
| EA-514 RF | Opalion | EA-514 RF is a self-crosslinkable acrylic copolymer dispersion esters. Has bimodal self-crosslinking, i.e. crosslinking at room temperature and another 100-150o.C. Furthermore it is reactive at high temperatures with melamine resins. Crosslinking at room ...veja mais EA-514 RF is a self-crosslinkable acrylic copolymer dispersion esters. Has bimodal self-crosslinking, i.e. crosslinking at room temperature and another 100-150o.C. Furthermore it is reactive at high temperatures with melamine resins. Crosslinking at room temperature takes place once the water evaporated and complete 3 to 7 days depending on the humidity and temperature. The strength achieved is sufficient for stamping requirements without air drying oven. There a 15% dispersion mixed with extenders and pigments used. In the resinated fabric you can reach the level of the second self-crosslinking by heating 5 minutes 140o.C and 3% of melamine resin is performed third crosslinking reaction. veja menos | |
| Humocer® 100 A 45 SP | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 SP es una mezcla de alto rendimiento de los agentes repelentes al agua. Humocer® 100 A 45 SP es una hidrorelente utilizado como aditivo, lubricante y desmoldante en pinturas y revestimientos exteriores de agua internoa y más allá de la b...veja mais Humocer® 100 A 45 SP es una mezcla de alto rendimiento de los agentes repelentes al agua. Humocer® 100 A 45 SP es una hidrorelente utilizado como aditivo, lubricante y desmoldante en pinturas y revestimientos exteriores de agua internoa y más allá de la base de las masasbasado en resina acrílica y PVA. Perfecto para su aplicación, agitar bien antes de usar. El uso común de dosis de 1- 3% en el peso total del producto en la que se añadirá. veja menos | |
| Humocer® 100 A 45 T | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 T un emulsão de parafina utilizada como agente impermeabilizante. Humocer® 100 A 45 T un produto utilizado como aditivo hidrorepelente, sendo aplicadas nas tintas e nos revestimentos internos e externos base água além das massas com base...veja mais Humocer® 100 A 45 T un emulsão de parafina utilizada como agente impermeabilizante. Humocer® 100 A 45 T un produto utilizado como aditivo hidrorepelente, sendo aplicadas nas tintas e nos revestimentos internos e externos base água além das massas com base resinas acrílicas e PVA. veja menos | |
| Humocer® 100 A 45 T EX | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 T EX es una emulsión de parafina con alta estabilidad y excelente dispersión en el agua. Humocer® 100 A 45 T EX utilizado como Hidrorepelente, su aplicación es en pinturas y en los revestimientos internos y externos a base de agua además...veja mais Humocer® 100 A 45 T EX es una emulsión de parafina con alta estabilidad y excelente dispersión en el agua. Humocer® 100 A 45 T EX utilizado como Hidrorepelente, su aplicación es en pinturas y en los revestimientos internos y externos a base de agua además de las masas con resina acrílica y PVA. Las dosis utilizadas normalmente varían entre 1- 3% del peso total del producto en la que se añadirá. veja menos | |
| Humocer® 100 A 45 TM | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 TM es una emulsión de parafina con alta estabilidad y excelente dispersión en el agua. Humocer® 100 A 45 TM es hidrorelente utilizado como aditivo, lubricante y desmoldante en pinturas y revestimientos exteriores de agua internoa y más a...veja mais Humocer® 100 A 45 TM es una emulsión de parafina con alta estabilidad y excelente dispersión en el agua. Humocer® 100 A 45 TM es hidrorelente utilizado como aditivo, lubricante y desmoldante en pinturas y revestimientos exteriores de agua internoa y más allá de la base de las masasbasado en resina acrílica y PVA. Perfecto para su aplicación, agitar bien antes de usar. veja menos | |
| Humocer® 100 A 45 TM EX | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 TM EX is a water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and external coverings. It is based on water beyond the masses with base acrylic resins and PVA. | |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...veja mais HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. veja menos | Request Sample |
| LS-6941 | NuSil Silicone Technology 1 | LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This s...veja mais LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This silicone is also ideal for applications that require index matching at 1.41. It is suitable for applications that require an operating temperature range of -65 to 240°C (–85 to 465°F). veja menos | |
| LS-6943 | NuSil Silicone Technology 1 | LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for ...veja mais LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for the casting, injecting or bonding molding of high performance optical components. It is ideal to be used applications with an opertaing temperature range of -115 to 260°C (–175 to 500°F). veja menos | |
| LS-6946 | NuSil Silicone Technology 1 | LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product ...veja mais LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product is physically strong and operates on a wide temperature range. It is ideal for the bonding, casting or injecting molding of high performance optical components. veja menos | |
| N3D-F2110 | Sartomer Americas | N3D-F2110 is a low viscosity (meth)acrylate capable of delivering a wide range of physical performance. Its ease of handling makes it an excellent starting point for new formulators targeting flexible thermoplastics performance. | |
| N3D-I2100 | Sartomer Americas | N3D-I2100 is a low viscosity urethane (meth)acrylate system capable of leveraging high modulus with enhanced impact resistance over traditional acrylic formulations. Optimized to a viscosity for handling and easy formulating to a diverse range of printing...veja mais N3D-I2100 is a low viscosity urethane (meth)acrylate system capable of leveraging high modulus with enhanced impact resistance over traditional acrylic formulations. Optimized to a viscosity for handling and easy formulating to a diverse range of printing equipment. veja menos | |
| N3D-P110 | Sartomer Americas | N3D-P110 has been specifically designed for bottom-up printing systems incorporating non-swelling components for printing ease. N3D-P110 produces transparent parts at high resolution making it an exceptional choice for your prototyping needs. | |
| N3D-P2120 | Sartomer Americas | N3D-P2120 is a resin system specifically designed for formulators targeting high quality prototyping. This particular resin system features novel (meth)acrylate oligomers that provide targeted cure speed and physical durability while maintaining a low eno...veja mais N3D-P2120 is a resin system specifically designed for formulators targeting high quality prototyping. This particular resin system features novel (meth)acrylate oligomers that provide targeted cure speed and physical durability while maintaining a low enough viscosity to ease handling and mixing. veja menos | |
| NOVACRYL™ 3797 | Synthomer | NOVACRYL™ 3797 is a water-based, pressure sensitive acrylic designed for removable applications. | |
| NOVACRYL™ PS-R 300 | Synthomer | NOVACRYL™ PS-R 300 is a water-based acrylic polymer designed for removable pressure sensitive adhesives for masking and painter's tapes, labels, and protective films. | |
| Opalion 2010 | Opalion | Opalion 2010 is a dispersion of very high crosslinking copolymers of esters, acrylic and vinyl. It is used as a binder for printing and resinated fabric, providing a soft hand and excellent wash resistance. | |
| Opalion Binder I | Opalion | Opalion Binder I is a micro acrylic polymer and impregnating resin. It is for use as an impregnation for leather flower that gives an excellent break and good interior filling. It reaches the same leather fibers and can be used for natural finishes. | |
| Policure 5000 | Polidur San Luis | Policure 5000 is unneutralized Trimethylolpropane triacrylated and is a high linking cross polymer. This product presents excellent cured and film hardness and good viscosity reduction. It is for use in varnishes and pigmented paints for wood, Inks and va...veja mais Policure 5000 is unneutralized Trimethylolpropane triacrylated and is a high linking cross polymer. This product presents excellent cured and film hardness and good viscosity reduction. It is for use in varnishes and pigmented paints for wood, Inks and varnishes for plastics, paper and glass. veja menos | |
| Policure 5010 | Polidur San Luis | Policure 5010 is Trimethylolpropane triacrylated that provides excellent cured and film hardness, high crosslinking monomer and good viscosity reduction. It is for use in varnishes and pigmented paints for wood and inks and varnishes for plastics, paper a...veja mais Policure 5010 is Trimethylolpropane triacrylated that provides excellent cured and film hardness, high crosslinking monomer and good viscosity reduction. It is for use in varnishes and pigmented paints for wood and inks and varnishes for plastics, paper and glass. veja menos | |
| Polimer 3100 | Polidur San Luis | Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylat...veja mais Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylated oligomer. veja menos | |
| Polimer 4007 | Polidur San Luis | Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent ...veja mais Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and varnishes and lacquers for wood. veja menos | |
| Polimer 4008 | Polidur San Luis | Polimer 4008 is epoxy acrylated at 80% in TMPTA. This product presents excellent curing speed, is a versatile oligomer for different applications and high film hardness and gloss. It is for use in varnishes and pigmented paints for wood, inks and varnishe...veja mais Polimer 4008 is epoxy acrylated at 80% in TMPTA. This product presents excellent curing speed, is a versatile oligomer for different applications and high film hardness and gloss. It is for use in varnishes and pigmented paints for wood, inks and varnishes for plastics, paper and glass and varnishes and lacquers resistance to risk. veja menos | |
| Polimer 6000 | Polidur San Luis | Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excelle...veja mais Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and Varnishes and lacquers for wood. veja menos | |
| PRO13944 | Sartomer Americas | PRO13944 is a high molecular weight, difunctional polyether urethane-acrylate. On cure, it can undergo a phase separation process to improve toughness of some formulations. | |
| PRO14072 | Sartomer Americas | PRO14072 is a low viscosity (meth)acrylate providing low residual ash content and high reactivity for the printing of ceramic by SLA/DLP. PRO14072 offers high green strength and flexibility in the development of technical ceramic formulations. | |
| PRO14131 | Sartomer Americas | PRO14131 is a workable viscosity impact modifying resin which is compatible with a larger range of (meth)acrylates when compared to competitive impact modifiers. Provides increased toughness while not significantly decreasing modulus of formulations. | |
| PRO14213 | Sartomer Americas | PRO14213 is a high performance compound expected to increase the mechanical properties of your tough and rigid 3D printed resins. By combining a high young modulus with a good elongation, this new oligomer will open up the range of possibilities for all y...veja mais PRO14213 is a high performance compound expected to increase the mechanical properties of your tough and rigid 3D printed resins. By combining a high young modulus with a good elongation, this new oligomer will open up the range of possibilities for all your ABS-like applications. veja menos | |
| S-9127 / 70% | Opalion | S-9127 / 70% is a thermoplastic acrylic solution of high soluble solids in aliphatic solvents. It is for use in waxes solvent, paints for swimming pools, road marking, paintings for floors, replacement alquis synthetic enamels without use of additives, re...veja mais S-9127 / 70% is a thermoplastic acrylic solution of high soluble solids in aliphatic solvents. It is for use in waxes solvent, paints for swimming pools, road marking, paintings for floors, replacement alquis synthetic enamels without use of additives, replacement chlorinated rubber at lower cost, replacement of solid acrylic resins at lower cost, low body paints, protective varnishes that do not remove the paint coating layer contain aliphatic solvents. veja menos | |
| Sancryl 825-60 X | Polidur San Luis | Sancryl 825-60 X is a thermoplastic acrylic resin at 60% solids in xylene. This product provides Excellent dry and film hardness, weather resistance, adhesion to metal and plastics and solvent release. It is for use in metal lacquers, coatings for dificul...veja mais Sancryl 825-60 X is a thermoplastic acrylic resin at 60% solids in xylene. This product provides Excellent dry and film hardness, weather resistance, adhesion to metal and plastics and solvent release. It is for use in metal lacquers, coatings for dificult ahesion plastics (abs,pp,etc) and concrete coatings. veja menos | |
| Sancryl 842-60 X | Polidur San Luis | Sancryl 842-60 X is an hydroxylated acrylic resin at 60% in xilol. This product offers excellent weather and yellowing resistance and a high percentage of crosslinking. It is for use in two component polyurethane lacquers for machinery and industrial main...veja mais Sancryl 842-60 X is an hydroxylated acrylic resin at 60% in xilol. This product offers excellent weather and yellowing resistance and a high percentage of crosslinking. It is for use in two component polyurethane lacquers for machinery and industrial maintenance, metal lacquers, and sealants for concrete floors. veja menos | |
| Sancryl 864-60 AB | Polidur San Luis | Sancryl 864-60 AB is an hydroxylated acrylic resin at 60% solids in butyl acetate. This product offers excellent weather and yellowing resistance, gloss and mirror image (DOI). Sancryl 864-60 AB is for use in Two componet polyurethane lacquers, clear coa...veja mais Sancryl 864-60 AB is an hydroxylated acrylic resin at 60% solids in butyl acetate. This product offers excellent weather and yellowing resistance, gloss and mirror image (DOI). Sancryl 864-60 AB is for use in Two componet polyurethane lacquers, clear coat systems and top coats for the automotive industry. veja menos | |
| Sancryl 884-50 ABX | Polidur San Luis | Sancryl 884-50 ABX is an hydroxylated acrylic resin at 50% in butyl acetate:xilol (1:1). This product presents excellent sandability of primers for wood, excellent yelowing resistance and very fast drying and good hardness. It is for use in two component ...veja mais Sancryl 884-50 ABX is an hydroxylated acrylic resin at 50% in butyl acetate:xilol (1:1). This product presents excellent sandability of primers for wood, excellent yelowing resistance and very fast drying and good hardness. It is for use in two component polyurethane primers for wood, two component polyurethane lacquers for wood and two component polyurethane lacquers for machinery. veja menos | |
| SEPOLSION G315 | Sumitomo Seika Chemicals Co., Ltd. | SEPOLSION G315 is an aqueous emulsion composed of ethylene-glycidyl methacrylate copolymer resin. By utilizing high reactivity of the epoxy group, SEPOLSION G515 shows excellent adhesive strength for a variety of materials such as glass, paper, plastics, ...veja mais SEPOLSION G315 is an aqueous emulsion composed of ethylene-glycidyl methacrylate copolymer resin. By utilizing high reactivity of the epoxy group, SEPOLSION G515 shows excellent adhesive strength for a variety of materials such as glass, paper, plastics, metals. SEPOLSION G515 can be applied for adhesive on all kinds of substrates, sizing agent, and improvement additive. veja menos | |
| Solution Acrylic-9104 | Opalion | Solution Acrylic-9104 is a thermoplastic acrylic solution in xylene. It is compatibile with plasticizers, esters, aromatic and chlorinated paraffins with toners. This product is for use in paints for swimming pools and paintings for floors. | |
| SR506 C | Sartomer Americas | SR506 C, isobornyl acrylate, is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature. | |
| SYNTHEBOND™ 1090 | Synthomer | SYNTHEBOND™ 1090 is a styrene acrylic emulsion designed for use as laminating adhesive or in heat seal applications. | |
| SYNTHEBOND™ 7656 | Synthomer | SYNTHEBOND™ 7656 is an acrylic emulsion polymer designed for formulating pressure sensitive adhesives for UL181B HVAC tapes. It demonstrates high cohesion and good instant peel. | |
| SYNTHEBOND™ 7703 | Synthomer | SYNTHEBOND™ 7703 is coater ready acrylic pressure sensitive adhesive designed for clear label applications. | |
| SYNTHEBOND™ E 1020 | Synthomer | SYNTHEBOND™ E 1020 is an acrylic emulsion designed for use as a primer or topcoat for paper and film. | |
| SYNTHEBOND™ E 2150 | Synthomer | SYNTHEBOND™ E 2151 is a high solids acrylic polymer for use in a variety of high performance adhesive and caulk applications. | |
| SYNTHEBOND™ E 4010 | Synthomer | SYNTHEBOND™ E 4010 is a styrene acrylic copolymer of use in a variety of adhesive applications. | |
| SYNTHEBOND™ E 6022 | Synthomer | SYNTHEBOND™ E 6022 is a high solids acrylic copolymer for use in a variety of high-performance caulks, sealants, adhesives, and coating applications. | |
| SYNTHEBOND™ E 6091 | Synthomer | SYNTHEBOND™ E 6091 is a high solids acrylic copolymer for use in a variety of high-performance caulks, sealants, adhesives, and coating applications. | |
| SYNTHEBOND™ L 4805 | Synthomer | SYNTHEBOND™ L 4805 is an aqueous acrylic polymer dispersion, which does not contain APEO. It s a pressure sensitive adhesive designed for use in various paper and filmic label applications. | |
| SYNTHEBOND™ PRIME 7501 | Synthomer | SYNTHEBOND™ PRIME 7501 is a coater ready acrylic emulsion polymer formulated for applications where high shear and high temperature resistance is needed. | |
| SYNTHEBOND™ PRIME 7525 | Synthomer | SYNTHEBOND™ PRIME 7525 is a coater ready acrylic emulsion polymer for applications where good low surface energy bonding is needed. | |
| SYNTHEBOND™ PRIME 7526 | Synthomer | SYNTHEBOND™ PRIME 7526 is a coater ready acrylic emulsion polymer for applications where good low surface energy bonding is needed. | |
| SYNTHEBOND™ XA 2207 | Synthomer | SYNTHEBOND™ XA 2207 is an aqueous acrylic polymer dispersion, which does not contain APEO. It s a coater ready pressure sensitive adhesive designed for use in various paper and filmic label applications. | |
| Texicryl® 13-023 | Scott Bader | Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considere...veja mais Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considered for use in mastic formulations, glass fiber bonding tapes and adhesives for expanded polystyrene tiles. It displays good water handling capabilities and offers adhesive bonds high strength. veja menos | |
| Texicryl® 13-031 | Scott Bader | Texicryl® 13-031 is a styrene acrylic copolymer emulsion that is made for use in textured and wall coatings, utility grade ceramic tile adhesives and other applications where high pigment loading and shear stability are needed. | |
| Texicryl® 13-061 | Scott Bader | Texicryl® 13-061 is a styrene acrylic copolymer emulsion that has been created specifically for the production of flexible water-resistant ceramic tile adhesives. It is also ideal for use in exterior wall and elastomeric roof coatings as well as floor til...veja mais Texicryl® 13-061 is a styrene acrylic copolymer emulsion that has been created specifically for the production of flexible water-resistant ceramic tile adhesives. It is also ideal for use in exterior wall and elastomeric roof coatings as well as floor tile adhesives. Silane structures that are on the polymer backbone show good adhesive strength to difficult substrates like green concrete. veja menos | |
| Texicryl® 13-065 | Scott Bader | Texicryl® 13-065 is a styrene acrylic copolymer emulsion that has been created especially as a binder for high performance ceramic tile adhesives along with fix and grouts. It is also Alkyl Phenol Ethoxylate-free. | |
| Texicryl® 13-066 | Scott Bader | Texicryl® 13-066 is a styrene acrylic copolymer emulsion created especially for the making of flexible, water-resistant ceramic tile adhesives. It is particularly suited for floor tile adhesives and is free of Alkyl Phenol Ethoxylate. | |
| Texicryl® 13-070 | Scott Bader | Texicryl® 13-070 is a styrene-acrylic copolymer emulsion that has been created primarily with a variety of filler types into D1 tile adhesives. | |
| Texicryl® 13-073 | Scott Bader | Texicryl® 13-073 is a styrene acrylic copolymer emulsion that can be compounded into adhesives with a high degree of flexibility, allowing it to be used in the production of water-resistant ceramic tile adhesives. It is especially ideal for floor tile adh...veja mais Texicryl® 13-073 is a styrene acrylic copolymer emulsion that can be compounded into adhesives with a high degree of flexibility, allowing it to be used in the production of water-resistant ceramic tile adhesives. It is especially ideal for floor tile adhesives and is Alkyl Phenol Ethoxylate-free. veja menos | |
| Texicryl® 13-076 | Scott Bader | Texicryl® 13-076 is an all-acrylic copolymer that has good water resistance properties and is ideal for use in a variety of coating and binding applications. It is recommended for use in exterior coatings and can also be used as a polymeric additive in ce...veja mais Texicryl® 13-076 is an all-acrylic copolymer that has good water resistance properties and is ideal for use in a variety of coating and binding applications. It is recommended for use in exterior coatings and can also be used as a polymeric additive in cementitious admixtures to improve the physical properties of the system. veja menos | |
| Texicryl® 13-190 | Scott Bader | Texicryl® 13-190 is a styrene acrylic copolymer emulsion that is designed to withstand high filler pigment loadings. It is especially suited as a binder for waterborne adhesives that need high flexibility and adhesion. The polyer can be blended with harde...veja mais Texicryl® 13-190 is a styrene acrylic copolymer emulsion that is designed to withstand high filler pigment loadings. It is especially suited as a binder for waterborne adhesives that need high flexibility and adhesion. The polyer can be blended with harder polymers to obtain better flexibility and adhesion. Texicryl® 13-190 is ideal for a variety of water-based adhesives and emulsion paint formulations. It can be formulated into coatings ranging from semi-gloss finishes to high pigment volume concentrations with low costs. veja menos | |
| Texicryl® 13-220 | Scott Bader | Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printi...veja mais Texicryl® 13-220 is a self cross-linking acrylic copolymer emulsion that has a soft, flexible film after curing, providing a good resistance to washing on printed textiles. It offers good binding properties for pigments, making it ideal for pigment printing on flat screen and rotary systems. Texicryl® 13-220 also offers good adhesion on most substrates, with flexibility also ideal at low temperatures. Texicryl® 13-220 is suitable for the making of non-woven and flocking adhesives whether by pulverization, foaming or full bath methods. veja menos | |
| Texicryl® 13-525 | Scott Bader | Texicryl® 13-525 is for high quality blister packaging applications with superb seal integrity. High gloss, good levelling, low blocking. Modifier for natural rubber latex in cold seal applications. | |
| Texicryl® 13-526 | Scott Bader | Texicryl® 13-526 is a high performance styrene acrylic copolymer emulsion that has good water resistance properties and is designed for use in cold seal adhesive applications. | |
| Texicryl® 13-527 | Scott Bader | Texicryl® 13-527 is a high performance styrene acrylic copolymer emulsion that has high pigment binding properties making it ideal for use in cold seal adhesive applications. | |
| Texicryl® 13-528 | Scott Bader | Texicryl® 13-528 is a high performance styrene acrylic copolymer emulsion that is created for use in cold seal adhesive applications. | |
| Texicryl® 13-602 | Scott Bader | Texicryl® 13-602 is a styrene acrylic copolymer emulsion that is part of the Texicryl® specialty polymer range of applications, designed for use in decorators caulks, flexible fillers and sealant applications. | |
| Texicryl® 17-0330 | Scott Bader | Texicryl® 17-0330 is a styrene acrylic copolymer emulsion that can be used in a variety of water-based adhesives and emulsion paint formulations. It can be incorporated into coatings with properties ranging from semi-gloss finishes to high pigment volume ...veja mais Texicryl® 17-0330 is a styrene acrylic copolymer emulsion that can be used in a variety of water-based adhesives and emulsion paint formulations. It can be incorporated into coatings with properties ranging from semi-gloss finishes to high pigment volume concentration of low cost paints. Texicryl® 17-0330 is especially suited as a binder for waterborne adhesives that need adhesion and flexibility. The product is also designed for use in inks. veja menos | |
| Texicryl® AD8077 | Scott Bader | Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water ...veja mais Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water and slip resistance and white color. veja menos |
