| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...veja mais 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). veja menos | |
| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...veja mais BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. veja menos | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...veja mais BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. veja menos | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...veja mais BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. veja menos | |
| BYD-1403 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. Th...veja mais BYD-1403, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used on surface coatings for paper and leather, roller coatings, spray paints, transfer printing, and intaglio printing applications. This product is non-toxic. Its substrate is an aromatic waterborne polyurethane. veja menos | |
| BYK-3755 | BYK | BYK-3755 is a silicone-containing surface additive with extended food contact compliance for solvent-borne coating systems with a medium reduction in surface tension and a medium increase in surface slip. | |
| BYK-3756 | BYK | BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases ...veja mais BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases surface slip. veja menos | |
| CHS-Alkyd C 351 E 75 | Spolchemie | CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...veja mais CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. veja menos | |
| CHS-Alkyd C 351 X 60 | Spolchemie | CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...veja mais CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. veja menos | |
| CHS-Epoxy 101 X 60 | Spolchemie | CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination w...veja mais CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination with melamine-formaldehyde resins. veja menos | |
| Crestakyd® 30-5016 | Scott Bader | Crestakyd® 30-5016 is used for very quick drying industrial paints with good all round properties. | |
| Crestakyd® 41-6010 | Scott Bader | Crestakyd® 41-6010 is a styrene modified alkyd used for quick drying enamels. | |
| Disvacryl-1001 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1001 is a thermosetting acrylic resin. This product includes xylene and butanol as volatile byproducts. It can be used in high-quality domestic appliance and OEM automotive finishes. | |
| Disvacryl-1010 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1010 is a thermoplastic acrylic resin. This product includes naphtha solvents as a volatile byproduct. It can be used in high-quality air-drying coatings that provide good gloss and durability. | |
| Disvacryl-1011 | D.S.V. Chemicals Pvt. Ltd. | Disvacryl-1011 is a thermoplastic acrylic resin. This product includes xylene and naphtha solvents as volatile byproducts. It can be used in high-quality air-drying coatings for domestic appliances which provide good gloss and durability. | |
| Disvalkyd-544 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in stoving enamels, and nitrocellulose paints, primers, and putty. | |
| Disvalkyd-544 LV | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 LV is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in high-gloss stoving enamels. | |
| Disvamine-702 | D.S.V. Chemicals Pvt. Ltd. | Disvamine-702 is a butylated amino resin. This product is a melamine formaldehyde resin. It is soluble in butanol. Disvamine-702 can be used in stoving enamels and roller coatings. | |
| Domacryl 5130 70 BAc | HELIOS RESINS | Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and ma...veja mais Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and maintenance coatings. veja menos | |
| DOWSIL™ 8590 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...veja mais DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. veja menos | |
| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...veja mais Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. veja menos | |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...veja mais Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. veja menos | |
| Idroben 827 | Benasedo | Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...veja mais Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. veja menos | |
| ISOBEN 5 | Benasedo | ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...veja mais ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . veja menos | |
| Polyester Modified Silicon Resin SM1072A | Jiangsu Sanmu Group Corporation | SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and...veja mais SM1072A is a polyester modified silicone resin. It has high-low temperature resistance and hydrophobic moisture resistance, as well as good weather resistance and chemical resistance. After fully curing, the hardness is ≥ 5H, with high gloss, fullness and yellowing resistance. SM1072A can be widely used in heat resisting coatings, used as a basic resin for non-stick coatings and special coatings for frying pans, electric cookers, ovens, stoves, toasters, electric irons, kitchen ventilators, and gas stoves. veja menos | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...veja mais R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. veja menos | |
| R3-1075 | NuSil Silicone Technology 1 | R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It ca...veja mais R3-1075 is a one part, RTV silicone dispersion that has a non-corrosive cure. This product can be used as a protective coating that will prevent erosion and corrosion of various parts and surfaces in rockets, missiles, aircraft and launch equipment. It can also be utilized as a conformal coating for electrical and electronic components including rigid and flexible printed circuit boards. veja menos | |
| SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | Aglutinante à base de solvente para produção de revestimentos decorativos, resistentes ao calor. | Request Sample |
| SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
| WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) | Worlée-Chemie G.m.b.H. | O WorléeCryl® A 2445 (60% em Xileno/Solvesso 100/Butil Acetato 2:1:1) é uma resina acrílica que pode sofrer ligação cruzada (ser reticulada) com poliisocianatos. Este grau apresenta um teor não-volátil de 60% ± 1. O W´CRYL um 2445 é um copolímero acrílico...veja mais O WorléeCryl® A 2445 (60% em Xileno/Solvesso 100/Butil Acetato 2:1:1) é uma resina acrílica que pode sofrer ligação cruzada (ser reticulada) com poliisocianatos. Este grau apresenta um teor não-volátil de 60% ± 1. O W´CRYL um 2445 é um copolímero acrílico hidroxifuncional para a fabricação de revestimentos superiores de 2 componentes de alta qualidade. As tintas à base de W'Cryl A 2445 apresentam excelente resistência contra intempéries e produtos químicos. veja menos | |
| WorléeKyd S 549 (55% In White Spirit 135-175) | Worlée-Chemie G.m.b.H. | WorléeKyd S 549 (55% em White Spirit 135-175) é uma resina alquídica de secagem rápida, baixa viscosidade e média em óleo para uso em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do...veja mais WorléeKyd S 549 (55% em White Spirit 135-175) é uma resina alquídica de secagem rápida, baixa viscosidade e média em óleo para uso em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do tipo "faça você mesmo" e tintas para radiador. W´Kyd S 549 é compatível com a maioria das resinas alquídicas de secagem a ar médias e longas em óleo. veja menos | |
| WorléeKyd S 549 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd S 549 (55% em White Spirit 145-195) é uma resina alquídica de secagem rápida, baixa viscosidade e média em uso em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do tipo "faç...veja mais WorléeKyd S 549 (55% em White Spirit 145-195) é uma resina alquídica de secagem rápida, baixa viscosidade e média em uso em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do tipo "faça você mesmo" e tintas para radiador. W´Kyd S 549 é uma resina alquídica semigordurosa para uso universal. Graças às boas propriedades como secagem rápida, retenção do brilho e boa resistência ao clima, pode-se produzir tintas industriais, automotivas, para carroceria de veículos, bem como revestimentos por imersão e de fluxo de alta qualidade, além de tintas do tipo "faça você mesmo" e para radiador. veja menos | |
| WorléeKyd SO 554 | Worlée-Chemie G.m.b.H. | WorléeKyd SO 554 é uma resina alquídica média em óleo de secagem rápida para tintas industriais, automotivas e de máquinas de secagem a ar, assim como para tintas desaromatizadas do tipo "faça você mesmo" e tintas para radiador. Esta categoria apresenta u...veja mais WorléeKyd SO 554 é uma resina alquídica média em óleo de secagem rápida para tintas industriais, automotivas e de máquinas de secagem a ar, assim como para tintas desaromatizadas do tipo "faça você mesmo" e tintas para radiador. Esta categoria apresenta um teor não volátil de 55% ± 1. veja menos | |
| WorléeKyd V 162 | Worlée-Chemie G.m.b.H. | WorléeKyd V 162 é uma resina alquídica de secagem rápida e média em óleo para uso em tintas industriais, automotivas, para máquinas e radiadores de secagem a ar e forçada. Esta categoria apresenta um teor não volátil de 55% ± 1. W´Kyd V 162 é compatível c...veja mais WorléeKyd V 162 é uma resina alquídica de secagem rápida e média em óleo para uso em tintas industriais, automotivas, para máquinas e radiadores de secagem a ar e forçada. Esta categoria apresenta um teor não volátil de 55% ± 1. W´Kyd V 162 é compatível com diversas resinas alquídicas curtas e médias em óleo. veja menos | |
| WorléeKyd V 543 (55% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | WorléeKyd V 543 (55% em White Spirit 145-195) é uma resina alquídica de secagem rápida e média em óleo para utilização em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do tipo "faça ...veja mais WorléeKyd V 543 (55% em White Spirit 145-195) é uma resina alquídica de secagem rápida e média em óleo para utilização em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do tipo "faça você mesmo" e tintas para radiador. Esta categoria apresenta um teor não volátil de 55% ± 1. veja menos | |
| WorléeKyd V 543 (55% In White Spirit 145-195/ XYLENE) | Worlée-Chemie G.m.b.H. | WorléeKyd V 543 (55% em White Spirit 145-195/ XYLENE)) é uma resina alquídica de secagem rápida e média em óleo para utilização em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do ti...veja mais WorléeKyd V 543 (55% em White Spirit 145-195/ XYLENE)) é uma resina alquídica de secagem rápida e média em óleo para utilização em tintas de secagem a ar e forçada para uso industrial, em veículos e máquinas, assim como para tintas de secagem rápida do tipo "faça você mesmo" e tintas para radiador. Esta categoria apresenta um teor não volátil de 55% ± 1. Este produto apresenta um bom brilho, resistência ao amarelamento e boa compatibilidade com outras resinas. veja menos |
