UL Prospector
Prospector

Sucesso!

Pesquisa Salva com Sucesso
668 Resultados
4653-V-50 Rosin Modified Alkyd Gabriel Performance Products 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers.
4702-X-50 Chain Stopped Alkyd Resin Gabriel Performance Products 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems.
4714-P-75 Chain Stopped Water Soluble Alkyd Resin Gabriel Performance Products 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...veja mais 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. veja menos
4731-X-80 High Solids Polyester Resin Gabriel Performance Products 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels.
4770-X-60 Short Oil Alkyd Resin Gabriel Performance Products 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability.
4778-X-50 Phenolic/rosin Modified Alkyd Resin Gabriel Performance Products 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...veja mais 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. veja menos
4845-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated.
4915-PMA-85 High Solids Short Oil Alkyd Gabriel Performance Products 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents.
4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil Gabriel Performance Products 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings.
4986-V-50 VT Modified Alkyd Resin Gabriel Performance Products 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels.
4996 Long Oil Alkyd Resin Gabriel Performance Products 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings.
4997-X-50 Epoxy Ester Resin Gabriel Performance Products 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat.
5009-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles.
5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin Gabriel Performance Products 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...veja mais 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. veja menos
5018-X-50 Acrylic Modified Alkyd Resin Gabriel Performance Products 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...veja mais 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. veja menos
5121-BC-85 Water Reducible Alkyd Resin Gabriel Performance Products 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...veja mais 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. veja menos
Abiester 90 Spolchemie Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks.
Abifen 125 D Spolchemie Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...veja mais Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. veja menos
AEROXIDE® ALU 130 Evonik Operations GmbH, BL Coating Additives AEROXIDE® ALU 130 is a very fine-particle fumed aluminum oxide with a very high specific surface area. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings. Request Sample
AFCONA - 1501 AFCONA Additives Sdn Bhd AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems ...veja mais AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems and baking paints. AFCONA - 1501 functions as a universal dispersing resin tailor-made for the production of aqueous-based universal pigment concentrates, finding application in water-based coatings. veja menos
AFCONA - 1503 AFCONA Additives Sdn Bhd AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of ...veja mais AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. veja menos
Agrol® 2.0 BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). veja menos
Agrol® 3.0 AO BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). veja menos
Agrol® 3.6 BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). veja menos
Agrol® 4.0 BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...veja mais Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). veja menos
Agrol Diamond® BioBased Technologies Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...veja mais Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. veja menos
Agrol Platinum™ BioBased Technologies Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...veja mais Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. veja menos
Agrol Prime™ A-110 BioBased Technologies Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...veja mais Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. veja menos
Agrol Prime™ A-56 BioBased Technologies Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...veja mais Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. veja menos
Allyl Pentaerythritol Perstorp Allyl Pentaerythritol (APE) is mainly used as a crosslinker in various acrylic polymers used as thickeners.
Alpha-Rez™ 9200 E Lawter Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear condi...veja mais Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear conditions. It also has a high critical toning index which is crucial for waterless offset inks. Alpha-Rez™ 9200 E is suitable for use in web offset, coldset and heatset applications as well as in letterpress and sheet-fed systems. veja menos
AM-636 Quaker Color (a Division of McAdoo & Allen, Inc.) AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistanc...veja mais AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistance, and flexibility. AM-636 is solvent free and features a low viscosity for ease of integration into coating. veja menos
AM-71 Quaker Color (a Division of McAdoo & Allen, Inc.) AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in...veja mais AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in leather base coat or topcoat applications at levels from 1-3% to increase viscosity and enhance the rheology properties of the coating. veja menos
AM-80 Quaker Color (a Division of McAdoo & Allen, Inc.) AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applicatio...veja mais AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applications at levels from 1-4% to increase viscosity and enhance the rheology properties of roll coated base coats. . veja menos
Amino Modified Polysiloxane R-8104 Zhejiang Feidian Chemical Co., Ltd. R-8104 is an amino modified polysiloxane. It maintains good amino reaction activity and coupling effect, and it provides better storage activity and low volatility. This product is widely used in modified plastics and coating applications.
AQUACER 571 BYK AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems.
Aqualac AYD-127 Aquent Impex Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...veja mais Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). veja menos
Aqualac AYD-128 Aquent Impex Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...veja mais Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). veja menos
Aqualac AYD-801 Aquent Impex Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...veja mais Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-801 has and epoxy equivalent of 450~500 (g/eq) and softening point of 65~75 (℃). veja menos
Aqualac AYD-802 Aquent Impex Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...veja mais Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-802 has and epoxy equivalent of 600~700 (g/eq) and softening point of 81~89 (℃). veja menos
Aqualac AYD-803 Aquent Impex Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...veja mais Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-803 has and epoxy equivalent of 700~900 (g/eq) and softening point of 90~96 (℃). veja menos
Aqualac AYD-803U Aquent Impex Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...veja mais Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). veja menos
Aqualac AYD-804 Aquent Impex Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...veja mais Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). veja menos
Aqualac AYDPG- 660 Aquent Impex Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq).
Aqualac AYDPG- 669 Aquent Impex Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq).
Aqualac AYDPG-300 Aquent Impex Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq).
Araldite® GT 6099 Jubail Chemical Industries Co. Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of he...veja mais Araldite® GT 6099 is a high molecular weight, solid epoxy resin based on Bisphenol A. This product is characterized by its deep-drawing capability, flexibility, impact resistance, and chemical resistance. Araldite® GT 6099 is used in the formulation of heat-curing primers and enamels as well as anti-corrosion paints when combined with polyisocyanates. veja menos
Araldite® GT 6609 Jubail Chemical Industries Co. Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking pr...veja mais Araldite® GT 6609 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its low viscosity, flexibility, impact resistance, and chemical resistance. Araldite® GT 6609 is used in the formulation of baking primers and enamels as well as cold-curing coatings when combined with polyisocyanates. veja menos
Aromatic C9 Hydrocarbon Resin Aquatac I100 Aquent Impex Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...veja mais Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I100 has an Gardner colour value of 3-4. veja menos
Aromatic C9 Hydrocarbon Resin Aquatac I120S Aquent Impex Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polyme...veja mais Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I120S has an Gardner colour value of 4-5. veja menos
Aromatic C9 Hydrocarbon Resin Aquatac I140 Aquent Impex Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...veja mais Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I140 has an Gardner colour value of 5-6. veja menos
BENASOL AS 452 Benasedo BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations.
Benasol HS 754 Benasedo Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance.
BENCRYL PU 137 Benasedo BENCRYL PU 137 is a linear aliphatic urethane acrylated oligomer endowed with very good flexibility, good hardnes and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings.
Benester 27 Benasedo Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications.
Benester 742 Benasedo Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance.
Benester 839 Benasedo Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industria...veja mais Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primers and enamels, especially for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. veja menos
Benzidine Yellow G Hangzhou Tiankai (China) Enterprise Co., Ltd. Benzidine Yellow G is a diarylide aniline yellow pigment that features high transparency, high tinting and color strength, and good liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0. It is commonly used in offset inks, water-bas...veja mais Benzidine Yellow G is a diarylide aniline yellow pigment that features high transparency, high tinting and color strength, and good liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0. It is commonly used in offset inks, water-based inks, solvent-based inks, and coatings. veja menos
Berlin Blue Hangzhou Tiankai (China) Enterprise Co., Ltd. Berlin Blue is a dark blue powder pigment featuring good color strength. This product is insoluble in water, ethanol and ether, and has a density of 1.8 g/cm3 and a pH value of 6-8. It finds application in coatings.
Black 722 Hangzhou Tiankai (China) Enterprise Co., Ltd. Black 722 is a black iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.5% and a pH value of 5-8. It fi...veja mais Black 722 is a black iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.5% and a pH value of 5-8. It finds application in various types of coatings. veja menos
Blue 6101 Hangzhou Tiankai (China) Enterprise Co., Ltd. Blue 6101 is a blue iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and finds application in vari...veja mais Blue 6101 is a blue iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and finds application in various types of coatings. veja menos
Bluepur 2937 S.A.P.I.C.I. SpA Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K ...veja mais Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K waterborne systems. veja menos
Brasmide R 15 SGS Polimeros Brasmide R 15 is a high viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanica...veja mais Brasmide R 15 is a high viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of finishing paints, coverings, enamels, and adhesives. veja menos
Brasmide R 1570 X SGS Polimeros Brasmide R 1570 X is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechan...veja mais Brasmide R 1570 X is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of finishing paints, coverings, enamels, and adhesives. veja menos
Brasmide R 25 SGS Polimeros Brasmide R 25 is a medium viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechani...veja mais Brasmide R 25 is a medium viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of finishing paints, coverings, enamels, and adhesives. veja menos
Brasmide R 40 SGS Polimeros Brasmide R 40 is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical...veja mais Brasmide R 40 is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of maintenance paint, coverings, and enamel paints. veja menos
Brown 686 Hangzhou Tiankai (China) Enterprise Co., Ltd. Brown 686 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It fi...veja mais Brown 686 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It finds application in various types of coatings. veja menos
Brown 860 Hangzhou Tiankai (China) Enterprise Co., Ltd. Brown 860 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It fi...veja mais Brown 860 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It finds application in various types of coatings. veja menos
BS-088N Quaker Color (a Division of McAdoo & Allen, Inc.) BS-088N, in the form of a clear liquid, is a fluorosurfactant leveling and wetting aid for water base leather coatings. It can be used in leather base or topcoat applications to reduce surface tension, promote flow, and eliminate surface defects like fish...veja mais BS-088N, in the form of a clear liquid, is a fluorosurfactant leveling and wetting aid for water base leather coatings. It can be used in leather base or topcoat applications to reduce surface tension, promote flow, and eliminate surface defects like fish eyes or craters. veja menos
BS-287 Quaker Color (a Division of McAdoo & Allen, Inc.) BS-287, in the form of a translucent liquid, is silica based flatting agent with a very fine particle size. It is used in leather topcoat or base coat applications to reduce or adjust gloss levels of the coating system.
BYD-1002A Tianyi Chemical Engineering Material Co., Ltd. BYD-1002A, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne refinishing paints, wooden paints, and rubber paints. This product is non-flammable and resistant to scratching. It...veja mais BYD-1002A, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne refinishing paints, wooden paints, and rubber paints. This product is non-flammable and resistant to scratching. It is pollution-free. veja menos
BYD-1014 Tianyi Chemical Engineering Material Co., Ltd. BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no afte...veja mais BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no after-tack with this product under high temperature conditions. veja menos
BYD-1348 Tianyi Chemical Engineering Material Co., Ltd. BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil...veja mais BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. veja menos
BYD3510 Tianyi Chemical Engineering Material Co., Ltd. BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...veja mais BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. veja menos
BYD3520 Tianyi Chemical Engineering Material Co., Ltd. BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements.
BYD3928 Tianyi Chemical Engineering Material Co., Ltd. BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...veja mais BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. veja menos
BYD7630 Tianyi Chemical Engineering Material Co., Ltd. BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...veja mais BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. veja menos
BYK-1642 BYK BYK-1642 is a polymer-based, VOC- and silicone-free defoamer for aqueous coatings, printing inks, adhesives, paper coatings, and construction chemicals. Optimum performance at the lowest dosage.
BYK-3756 BYK BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases ...veja mais BYK-3756 is a silicone-containing surface additive with extended food contact compliance for solvent-borne, solvent-free, and aqueous coating systems with a strong reduction in surface tension. Excellent substrate wetting prevents cratering and increases surface slip. veja menos
BYK-UV 3518 BYK BYK-UV 3518 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats.
BYK-UV 3519 BYK BYK-UV 3519 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats.
Cariflex™ IR0307 KU Polymer Kraton Polymers International Ltd. Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...veja mais Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. veja menos
Cariflex™ IR0307 KU Polymer Univar Solutions Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...veja mais Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. veja menos
Cariflex™ IR0310 KU Polymer Kraton Polymers International Ltd. Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...veja mais Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. veja menos
Cariflex™ IR0310 KU Polymer Univar Solutions Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...veja mais Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. veja menos
Cariflex™ IR0401 BU Latex Kraton Polymers International Ltd. Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...veja mais Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. veja menos
Cariflex™ IR0401 BU Latex Univar Solutions Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...veja mais Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. veja menos
Cariflex™ IR0401 SU Latex Kraton Polymers International Ltd. Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...veja mais Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. veja menos
Cariflex™ IR0401 SU Latex Univar Solutions Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...veja mais Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. veja menos
CERAFLOUR 1050 BYK CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...veja mais CERAFLOUR 1050 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. veja menos
CERAFLOUR 1051 BYK CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...veja mais CERAFLOUR 1051 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. veja menos
CERAFLOUR 1052 BYK CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to...veja mais CERAFLOUR 1052 is a PTFE-free micronized polyethylene wax additive for improving scratch and abrasion resistance and increasing the surface slip of aqueous, solvent-borne, solvent-free, and UV coating systems. Its function and efficiency are comparable to typical PE/PTFE wax additives. veja menos
CF5-3521-2 NuSil Silicone Technology 1 CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...veja mais CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. veja menos
CHS-Alkyd AL 2900 Spolchemie CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...veja mais CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. veja menos
CHS-Alkyd AL 3961 Spolchemie CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...veja mais CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. veja menos
CHS-Alkyd AL 3964 Spolchemie CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...veja mais CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. veja menos
CHS-Alkyd AL 7310 Spolchemie CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for ...veja mais CHS-Alkyd AL 7310 is a long oiled alkyd resin binder for printing inks. This product is made from soybean oil and it has high viscosity and is fully liquid. The oil length for this product is estimated to be around 75%. This product is primarily used for printing inks as a binder for offset, heatset and metal decorating inks. CHS-Alkyd AL 7150 has good color retention, water resistance and pigment wetting. veja menos
CHS-Alkyd S 471 WX 55 Spolchemie CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...veja mais CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. veja menos
CHS-Alkyd S 491 W 55 Spolchemie CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...veja mais CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. veja menos
CHS-Alkyd S 622 N 60 Spolchemie CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...veja mais CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. veja menos
CHS-Alkyd SU 621 N 50 Spolchemie CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...veja mais CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. veja menos
CHS-Alkyd SU 632 N 60 Spolchemie CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...veja mais CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. veja menos
CHS-Alkyd SU 671 W 60 Spolchemie CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is ...veja mais CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is primarily used for fast air-drying coatings for interior and exterior applications. veja menos
CHS-Alkyd TRI 841 Spolchemie CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...veja mais CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. veja menos