| Brasmide R 15 | SGS Polimeros | Brasmide R 15 is a high viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanica...veja mais Brasmide R 15 is a high viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of finishing paints, coverings, enamels, and adhesives. veja menos | |
| Brasmide R 1570 X | SGS Polimeros | Brasmide R 1570 X is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechan...veja mais Brasmide R 1570 X is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of finishing paints, coverings, enamels, and adhesives. veja menos | |
| Brasmide R 25 | SGS Polimeros | Brasmide R 25 is a medium viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechani...veja mais Brasmide R 25 is a medium viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of finishing paints, coverings, enamels, and adhesives. veja menos | |
| Brasmide R 40 | SGS Polimeros | Brasmide R 40 is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical...veja mais Brasmide R 40 is a low viscosity, reactive polyamide resin obtained through the reaction of dimerized fatty acids and polyamines which, in turn, react with epoxy resins to produce a polymer characterized by flexibility, chemical resistance, and mechanical resistance. This product is combined with epoxy resins in the the formulation of maintenance paint, coverings, and enamel paints. veja menos | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...veja mais Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. veja menos | |
| Flex-Rez™ 1084AS A | Lawter | Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is...veja mais Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is suitable for use in flexo/gravure inks for plastics and foils and in overprint varnishes and coatings. veja menos | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...veja mais Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. veja menos | |
| Flex-Rez™ 2433AD A | Lawter | Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographi...veja mais Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and heat-seal coatings. veja menos | |
| Flex-Rez™ 3370CS A | Lawter | Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varn...veja mais Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varnishes and coatings. veja menos | |
| Flex-Rez™ 4584AD A | Lawter | Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics an...veja mais Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics and foil, in cold seal release lacquers and in coatings and overprint varnishes. veja menos | |
| Kingmide 300 | Sanho Chemical Co., Ltd. | Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applicatio...veja mais Kingmide 300 is a high molecular weight, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 200-600 mPa.s and a specific gravity of 0.97. Kingmide 300 is most commonly used in coating formulation applications where increased adhesion, chemical-resistance, and water-resistance are required. veja menos | |
| Kingmide 310 | Sanho Chemical Co., Ltd. | Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...veja mais Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. veja menos | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...veja mais Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. veja menos | |
| Kingmide 340 | Sanho Chemical Co., Ltd. | Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty form...veja mais Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty formulation applications. veja menos |
