| ADDAPT® CODIS™ 95 | ADDAPT Chemicals BV | ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance...veja mais ADDAPT® CODIS™ 95 is a proprietary blend of alkanol-amines in water. It is used as a co-dispersant for mineral pigments, fillers, colorants, and solvent based alkyd paints. This product contributes to pH stability and provides high gloss, water resistance, and anti-corrosion properties. veja menos | |
| AFCONA - 5008 | AFCONA Additives Sdn Bhd | AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and or...veja mais AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and organically treated bentonites while decreasing pigment sedimentation. AFCONA – 5008 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. veja menos | |
| AFCONA - 5030 | AFCONA Additives Sdn Bhd | AFCONA – 5030 is a polymer of carboxylic acid and polyamide and an alkyl benzene and PMA solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces by reducing interf...veja mais AFCONA – 5030 is a polymer of carboxylic acid and polyamide and an alkyl benzene and PMA solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5030 is widely compatible in systems from no polarity to high polarity, finding application in artificial leather, and in polyurethane, alkyd, and polyamide systems for printing inks. veja menos | |
| AFCONA - 5044 | AFCONA Additives Sdn Bhd | AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfa...veja mais AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5044 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. veja menos | |
| AFCONA - 5065 | AFCONA Additives Sdn Bhd | AFCONA – 5065 is a high molecular weight unsaturated carboxylic acid combined with a compatible and organically modified polysiloxane. This transparent yellow to brown liquid is in an alkyl benzene and diisobutylketone solvent and functions as a wetting a...veja mais AFCONA – 5065 is a high molecular weight unsaturated carboxylic acid combined with a compatible and organically modified polysiloxane. This transparent yellow to brown liquid is in an alkyl benzene and diisobutylketone solvent and functions as a wetting and dispersing additive to prevent the flooding and floating of pigments. AFCONA – 5065 is recommended for systems with medium to high polarity, finding application in polyurethane, UPE, ultraviolet, and NC systems, and in baking paints, acid curing, and printing inks. veja menos | |
| AFCONA - 5244 | AFCONA Additives Sdn Bhd | AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the ...veja mais AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the interfacial tension between pigments or extenders and the vehicle. AFCONA – 5244 stabilizes pigments through electrical charge repulsion forces, finding application in epoxies and polyurethane primers, UPE applications such as gel coats, buttons, SMC, and BMC, and in P VC systems. veja menos | |
| ANTI-TERRA®-U 100 | BYK | Aditivo umectante e dispersante para sistemas à base de solvente e sem solvente. Sal de poliamina amidas insaturadas e de poliésteres acidíferos de baixo peso molecular. | |
| DISPERBYK®-2012 | BYK | DISPERBYK-2012 é adequado para trituração com e sem resina. O aditivo é compatível com uma vasta gama de resinas solúveis em água, emulsões e dispersões. Este aditivo de alto peso molecular causa a defloculação dos pigmentos através de estabilização estér...veja mais DISPERBYK-2012 é adequado para trituração com e sem resina. O aditivo é compatível com uma vasta gama de resinas solúveis em água, emulsões e dispersões. Este aditivo de alto peso molecular causa a defloculação dos pigmentos através de estabilização estérica. Portanto, firmeza de cor, transparência, brilho e estabilidade de armazenamento dos concentrados de pigmentos são melhorados. veja menos | |
| DISPERBYK-2014 | BYK | DISPERBYK-2014 is a 100% solvent-free wetting and dispersing additive for solvent-borne, solvent-free, aqueous and UV coatings, as well as for aqueous printing inks and inkjet inks. | |
| DISPERBYK®-2096 | BYK | Aditivo umectante e dispersante para melhora na aceitação de corante. Formulação de ésteres acidíferos e de álcoois de alto peso molecular. | |
| DISPERBYK®-2150 | BYK | Aditivos de umedecimento e dispersão de alto peso molecular, para sistemas à base de solvente e concentrados de pigmentos (alternativas para Disperbyk-163, Disperbyk-164 and Disperbyk-167). Soluções de copolímeros em bloco de alto peso molecular com grupo...veja mais Aditivos de umedecimento e dispersão de alto peso molecular, para sistemas à base de solvente e concentrados de pigmentos (alternativas para Disperbyk-163, Disperbyk-164 and Disperbyk-167). Soluções de copolímeros em bloco de alto peso molecular com grupos afínicos do pigmento. veja menos | |
| DISPERBYK-2150 TF | BYK | DISPERBYK-2150 TF is a wetting and dispersing additive for solvent-borne coating systems and resin-containing pigment concentrates with broad compatibility. Particularly compatible with thermoplastic acrylics (TPA) and cellulose nitrate. | |
| DISPERBYK-2151 TF | BYK | DISPERBYK-2151 TF is a tin-free hyperbranched wetting and dispersing additive for solvent-borne and solvent-free epoxy systems and other reactive systems. | |
| DISPERBYK-2152 TF | BYK | DISPERBYK-2152 TF is a tin-and Emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy and other reactive systems; conforms to the German AgBB. | |
| DISPERBYK®-2155 | BYK | Aditivo umectante e dispersante para sistemas à base de solvente e sem solvente, e concentrados de pigmentos. | |
| DISPERBYK-2155 TF | BYK | DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibili...veja mais DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibility. The 100 % active substance makes it particularly suitable for high-solid and solvent-free systems. DISPERBYK-2155 TF is the tin-free variant of DISPERBYK-2155. veja menos | |
| DISPERBYK-2163 TF | BYK | DISPERBYK-2163 TF is a wetting and dispersing additive for solvent-borne coatings and pigment concentrates. DISPERBYK-2163 TF is the aromatic- and tin-free version of DISPERBYK-2163. | |
| ECOPOLCOAT CCR 052-F | Ecopol Tech | ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, wit...veja mais ECOPOLCOAT CCR 052-F is an aqueous cationic dispersion of cross-linked organic-inorganic hybrid polyurethane, designed for textile coating with high hydrolytic stability. Once cured, it exhibits water-repellent properties and good moisture resistance, with approximately 85% biobased content. Tailored for stamping processes, it demonstrates thermal resistance, hardness, low friction and durability. This versatile polymer also provides antiadhesive properties, preventing unwanted material adhesion during stamping. veja menos | |
| EFKA® FA 4642 | BASF Formulation Additives | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...veja mais EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. veja menos | |
| Efka® FA 4654 EM | BASF Formulation Additives | Um aditivo dispersante, antisedimentação, antiencharcamento e antiflutuação para revestimentos não médios e não polares, e um auxílio à gelificação para bentonitas modificadas orgânicamente. | |
| EFKA® FA 4663 | BASF Formulation Additives | EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of a...veja mais EFKA® FA 4663 is a dispersant and grinding aid, anti-settling and anti-floating agent for coatings, paints, printing inks, and other similar surface coatings. It is also a gelling aid for organically modified bentonite. This product is a 50% solution of an electroneutral salt of a polycarboxylic acid with amine derivatives dissolved in higher aromatics. EFKA® FA 4663 is an almost universally applicable additive for nonaqueous coatings. It has proved its value in particular in systems based on alkyd resins, alkyd/melamine resins, acrylic and epoxy resins,chlorinated rubber, linseed oil/stand oil, etc. If some linear binders which contain hydroxyl groups (e.g. Desmophen® types from Bayer)are used with our product, thixotropy can occur. veja menos | |
| LOPON® 826 | ICL Phosphate Specialty | LOPON® 826 is a dispersing and wetting agent for emulsion silicate paints and silicate systems. It is an alkali phosphate and surfactant in aqueous solution. LOPON® 826 disperses pigments and fillers to achieve high solid contents within silicate systems....veja mais LOPON® 826 is a dispersing and wetting agent for emulsion silicate paints and silicate systems. It is an alkali phosphate and surfactant in aqueous solution. LOPON® 826 disperses pigments and fillers to achieve high solid contents within silicate systems. The application within emulsion silicate paints improves the rheological properties and the long time storage stability. The product is strongly alkaline and reacts with acids exothermically. veja menos | Request Sample |
| LOPON® DA 200 | ICL Phosphate Specialty | LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mi...veja mais LOPON® DA 200 is a universal dispersing agent based on low molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 200 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. veja menos | Request Sample |
| LOPON® DA 201 | ICL Phosphate Specialty | LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will ...veja mais LOPON® DA 201 is a highly efficient dispersing agent based on low molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 201 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. veja menos | Request Sample |
| LOPON® DA 400 | ICL Phosphate Specialty | LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and...veja mais LOPON® DA 400 is a universal dispersing agent based on middle molecular weight sodium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON ® DA 400 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. veja menos | Request Sample |
| LOPON® DA 401 | ICL Phosphate Specialty | LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence wi...veja mais LOPON® DA 401 is a highly efficient dispersing agent based on middle molecular weight potassium polyacrylate. It is specially designed for silicate emulsion paints. With potassium as cation, no further ions are brought into the system and efflorescence will be suppressed during the drying process as it can happen through the formation of sodium carbonate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 401 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. veja menos | Request Sample |
| LOPON® DA 402 | ICL Phosphate Specialty | LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, a...veja mais LOPON® DA 402 is a universal dispersing agent based on middle molecular weight ammonium polyacrylate. It achieves excellent deflocculation results when used in highly filled systems containing inorganic pigments e.g. titanium dioxide, calcium carbonate, and mica. LOPON® DA 402 has high alkaline stability and is highly compatible with polyphosphates such as POLYRON® N. This combination offers very good storage stability. veja menos | Request Sample |
| LOPON® PA | ICL Phosphate Specialty | LOPON® PA is a dispersing agent for emulsion paints, emulsion silicate paints, emulsion based varnishes and pigment pastes. This yellowish viscouse liquid is a polycarboxylic acid and amino derivative in aqueous solution. It has a synergy effect to polyph...veja mais LOPON® PA is a dispersing agent for emulsion paints, emulsion silicate paints, emulsion based varnishes and pigment pastes. This yellowish viscouse liquid is a polycarboxylic acid and amino derivative in aqueous solution. It has a synergy effect to polyphosphates like CALGON® N for obtaining washing and scrubbing resistant emulsion paints. The usual dosage of LOPON® PA is between 0.2 – 1.0 %, calculated on solid content. veja menos | Request Sample |
| NUOSPERSE® 2000 | Elementis | O NUOSPERSE® 2000 é um líquido portador/umectante para uso em corantes em conformidade com o COV e dispersões de pigmentos | |
| PAT-ADD DA 707 | Patcham USA | PAT-ADD DA 707 é um agente de dispersão anfotérico para uso em tintas a base de solvente, tintas, plastificantes e corantes. O PAT-ADD DA 707 é multifuncional e compatível com uma vasta gama de sistemas de pintura à base de solvente. No entanto, o PAT-ADD...veja mais PAT-ADD DA 707 é um agente de dispersão anfotérico para uso em tintas a base de solvente, tintas, plastificantes e corantes. O PAT-ADD DA 707 é multifuncional e compatível com uma vasta gama de sistemas de pintura à base de solvente. No entanto, o PAT-ADD DA 707 é particularmente eficaz como dispersante de pigmentos inorgânicos em tintas alquídicas de secagem a ar. veja menos | |
| PAT-ADD DA 831 | Patcham USA | PAT-ADD DA 831 é uma equilibrada mistura líquida de compostos ativos tensioativos aniônicos e não iônicos que fornece propriedades de anti-decantação e anti-queda. | |
| TEGO® Dispers 650 | Evonik Operations GmbH, BL Coating Additives | Aditivo umectante e dispersante para sistemas à base de água e à base de solvente. | Request Sample |
| TEGO® Dispers 651 | Evonik Operations GmbH, BL Coating Additives | Aditivo umectante e dispersante para sistemas à base de água e à base de solvente. | Request Sample |
| TEGO® Dispers 671 | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 671 is a polymeric wetting and dispersing additive for solventborne formulations. Provides high color strength, especially with organic pigments. Dispersions of carbon black pigments show a low viscosity and a blueish undertone. | Request Sample |
| TEGO® Dispers 740 W | Evonik Operations GmbH, BL Coating Additives | Aditivo umectante e dispersante para revestimentos à base de água. | Request Sample |
| TEGO® Dispers 760 W | Evonik Operations GmbH, BL Coating Additives | Aditivo umectante e dispersante para tintas de impressão e revestimentos à base de água. | Request Sample |
| TEGO® Dispers 761 W | Evonik Operations GmbH, BL Coating Additives | Tego Dispers 761 W ® é um aditivo dispersante e umectante de pigmento que oferece melhor umidade de pigmentos pretos carbono e orgânicos em dispersões contendo aglutinante. Também reduz a viscosidade e aumenta a intensidade da cor. | Request Sample |
| TEGO® Dispers 765 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 765 W is a wetting and dispersing additive for waterborne printing inks. In binder-free millbases, it shows good wetting and stabilization properties with organic pigments. | Request Sample |
| TEGO® Dispers 780 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 780 W is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne ink formulations. It is an excellent choice for resin-containing, resin-reduced as well as resin-free grinds. TEGO® Dispers 780 W provides exc...veja mais TEGO® Dispers 780 W is a polymeric, slightly anionic wetting and dispersing additive for high-quality waterborne ink formulations. It is an excellent choice for resin-containing, resin-reduced as well as resin-free grinds. TEGO® Dispers 780 W provides excellent pigment stabilization for organic and inorganic pigments. veja menos | Request Sample |
| ULTRAWET® 230 | Indorama Ventures | ULTRAWET® 230 is comprised of a mixture of Alkylphenol Polyglycol Ether and Polyethylene glycol in a water solution. This product acts as a dispersant in paints and pigments, moisturizer, emulsifier and stabilizer, avoiding the occurrence of flotation and...veja mais ULTRAWET® 230 is comprised of a mixture of Alkylphenol Polyglycol Ether and Polyethylene glycol in a water solution. This product acts as a dispersant in paints and pigments, moisturizer, emulsifier and stabilizer, avoiding the occurrence of flotation and bleeding of pigments in water-based systems, and as an emulsifier for emulsion polymerization in a PVA system. Its main advantage is chemical stability in a broad pH range, temperature and compatibility with anionic and cationic surfactant agents. veja menos |
